- 05 Jul, 2019 5 commits
-
-
Mark Zhang authored
Add an API to support set/clear per-port auto mode. Signed-off-by:
Mark Zhang <markz@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mark Zhang authored
Remove is_visible_in_pid_ns() from nldev.c and make it as a restrack API, so that it can be taken advantage by other parts like counter. Signed-off-by:
-
Mark Zhang authored
Add rdma_restrack_attach_task() which is able to attach a task other then "current" to a resource. Signed-off-by:
-
Mark Zhang authored
Introduce statistic counter as a new resource. It allows a user to monitor specific objects (e.g., QPs) by binding to a counter. In some cases a user counter resource is created with task other then "current", because its creation is done as part of rdmatool call. Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in the next patches. * mlx5-next: net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap net/mlx5: Properly name the generic WQE control field net/mlx5: Introduce TLS TX offload hardware bits and structures net/mlx5: Refactor mlx5_esw_query_functions for modularity net/mlx5: E-Switch prepare functions change handler to be modular net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()
-
- 04 Jul, 2019 6 commits
-
-
Mark Zhang authored
Add rts2rts_qp_counters_set_id field in hca cap so that RTS2RTS qp modification can be used to change the counter of a QP. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Daniel Kranzdorf authored
Make admin commands id easier to distinguish by using relevant bits from the producer counter. This allows us to differentiate admin commands with the same producer index (happens after admin queue overlap), which is helpful when debugging. Signed-off-by:
Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by:
Firas JahJah <firasj@amazon.com> Reviewed-by:
Yossi Leybovich <sleybo@amazon.com> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Valentine Fatiev authored
Despite failure in ipoib_dev_init() we continue with initialization flow and creation of child device. It causes to the situation where this child device is added too early to parent device list. Change the logic, so in case of failure we properly return error from ipoib_dev_init() and add child only in success path. Fixes: eaeb3984 ("IB/ipoib: Move init code to ndo_init") Signed-off-by:
Valentine Fatiev <valentinef@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
There is no need in custom memory zeroing, because it can be done by using kzalloc from the beginning. Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Lijun Ou authored
The patch below wasn't fully tested for all combinations of module and configs, and causes a compile failure: WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_ah.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_alloc.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cmd.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cq.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_db.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_hem.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_mr.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_pd.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_qp.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_restrack.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_srq.o see include/linux/module.h for more information ERROR: "hns_roce_bitmap_cleanup" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_bitmap_init" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_free_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_alloc_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_table_get" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_bitmap_alloc" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_table_find" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! The fix is to put the module sub components in the right line. Fixes: e9816ddf ("RDMA/hns: Cleanup unnecessary exported symbols") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
- 03 Jul, 2019 25 commits
-
-
Yishai Hadas authored
No need any more to hold mlx5_core_dev on the devx_object, it can be accessed from ib_dev. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Add DEVX support for CQ events by creating and destroying the CQ via mlx5_core and set an handler to manage its completions. Signed-off-by:
-
Yishai Hadas authored
Implement DEVX dispatching event by looking up for the applicable subscriptions for the reported event and using their target fd to signal/set the event. Signed-off-by:
-
Yishai Hadas authored
Enable subscription for device events over DEVX. Each subscription is added to the two level xarray data structure according to its event number and the DEVX object information in case was given with the given target fd. Those events will be reported over the given fd once will occur. Downstream patches will mange the dispatching to any subscription. Signed-off-by:
-
Yishai Hadas authored
Register DEVX with with mlx5_core to get async events. This will enable to dispatch the applicable events to its consumers in down stream patches. Signed-off-by:
-
Yishai Hadas authored
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD and its initial implementation. This object is from type class FD and will be used to read DEVX async events. Signed-off-by:
-
Tariq Toukan authored
A generic WQE control field is used for different purposes in different cases. Use union to allow using the proper name in each case. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Add TLS offload related IFC structs, layouts and enumerations. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Functions change event output data size changes when functions other than VFs will be enabled in HCA CAP. With current API, multiple callers needs to align, calculate accurate size of the output data depending on number on non VF functions enabled in the device. Instead of duplicating such math at multiple places, refactor mlx5_esw_query_functions() to return raw output allocated by itself. Caller must free the allocated memory using kvfree() as described in the function comment section. This hides calcuation within mlx5_esw_query_functions() and provides simpler API. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Eswitch function change handler will service multiple type of events for VFs and non VF functions update. Hence, introduce and use the helper function esw_vfs_changed_event_handler() for handling change in num VFs to improve the code readability. Signed-off-by:
-
Parav Pandit authored
Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports(). mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF vports as well. Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to more generic vport.h header file. Such exposure is not desired. Hence a mlx5_eswitch_get_total_vports() is introduced. Given that mlx5_eswitch_get_total_vports() API wants to work on const mlx5_core_dev*, change its helper functions also to accept const *dev. Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in the next patches. Resolved the conflicts: - esw_destroy_offloads_acl_tables() use the newer mlx5_esw_for_all_vports() version - esw_offloads_steering_init() drop the cap test - esw_offloads_init() drop the extra function arguments * branch 'mlx5-next': (39 commits) net/mlx5: Expose device definitions for object events net/mlx5: Report EQE data upon CQ completion net/mlx5: Report a CQ error event only when a handler was set net/mlx5: mlx5_core_create_cq() enhancements net/mlx5: Expose the API to register for ANY event net/mlx5: Use event mask based on device capabilities net/mlx5: Fix mlx5_core_destroy_cq() error flow net/mlx5: E-Switch, Handle UC address change in switchdev mode net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop net/mlx5: E-Switch, Use iterator for vlan and min-inline setups net/mlx5: E-Switch, Reg/unreg function changed event at correct stage net/mlx5: E-Switch, Consolidate eswitch function number of VFs net/mlx5: E-Switch, Refactor eswitch SR-IOV interface net/mlx5: Handle host PF vport mac/guid for ECPF net/mlx5: E-Switch, Use correct flags when configuring vlan net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs net/mlx5: Don't handle VF func change if host PF is disabled net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices net/mlx5: Move pci status reg access mutex to mlx5_pci_init net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type ... Signed-off-by:
-
Parav Pandit authored
Currently during dual port IB device registration in below code flow, ib_register_device() ib_device_register_sysfs() ib_setup_port_attrs() add_port() get_counter_table() get_perf_mad() process_mad() mlx5_ib_process_mad() mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully setup at the device level (because 2nd port is unaffiliated). As a result, get_perf_mad() registers different PMA counter group for 1st and 2nd port, namely pma_counter_ext and pma_counter. However both ports have the same capability and counter offsets. Due to this when counters are read by the user via sysfs in below code flow, counters are queried from wrong location from the device mainly from PPCNT instead of VPORT counters. show_pma_counter() get_perf_mad() process_mad() mlx5_ib_process_mad() process_pma_cmd() This shows all zero counters for 2nd port. To overcome this, process_pma_cmd() is invoked, and when unaffiliated port is not yet setup during device registration phase, make the query on the first port. while at it, only process_pma_cmd() needs to work on the native port number and underlying mdev, so shift the get, put calls to where its needed inside process_pma_cmd(). Fixes: 212f2a87 ("IB/mlx5: Route MADs for dual port RoCE") Signed-off-by:Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Expose an extra device definitions for objects events. It includes: object_type values for legacy objects and generic data header for any other object. Signed-off-by:
-
Yishai Hadas authored
Report EQE data upon CQ completion to let upper layers use this data. Signed-off-by:
-
Yishai Hadas authored
Report a CQ error event only when a handler was set. This enables mlx5_ib to not set a handler upon CQ creation and use some other mechanism to get this event as of other events by the mlx5_eq_notifier_register API. Signed-off-by:
-
Yishai Hadas authored
Enhance mlx5_core_create_cq() to get the command out buffer from the callers to let them use the output. Signed-off-by:
-
Yishai Hadas authored
Expose the API to register for ANY event, mlx5_ib will be able to use this functionality for its needs. Signed-off-by:
-
Yishai Hadas authored
Use the reported device capabilities for the supported user events (i.e. affiliated and un-affiliated) to set the EQ mask. As the event mask can be up to 256 defined by 4 entries of u64 change the applicable code to work accordingly. Signed-off-by:
-
Yishai Hadas authored
The firmware command to destroy a CQ might fail when the object is referenced by other object and the ref count is managed by the firmware. To enable a second successful destruction post the first failure need to change mlx5_eq_del_cq() to be a void function. As an error in mlx5_eq_del_cq() is quite fatal from the option to recover, a debug message inside it should be good enougth and it was changed to be void. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear': drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning: variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Liu, Changcheng authored
The API for ib_query_qp requires the driver to set qp_state and cur_qp_state on return, add the missing sets. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by:
Changcheng Liu <changcheng.liu@aliyun.com> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
-
Fuqian Huang authored
Use kmemdump instead of kzmalloc + memcpy. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by:
-
Fuqian Huang authored
vzalloc has already zeroed the memory. So a memset is unneeded. Signed-off-by:
-
Fuqian Huang authored
In commit af7ddd8a ("Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping"), dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory. So the memset after a coherent allocation function is not needed. Signed-off-by:
-
- 02 Jul, 2019 4 commits
-
-
Jason Gunthorpe authored
Bernard Metzler says: ==================== This patch set contributes the SoftiWarp driver rebased for latest rdma-next. SoftiWarp (siw) implements the iWarp RDMA protocol over kernel TCP sockets. The driver integrates with the linux-rdma framework. A matching userlevel driver is available as PR at https://github.com/linux-rdma/rdma-core/pull/536 Many thanks for reviewing and testing the driver, especially to Leon, Jason, Steve, Doug, Olga, Dennis, Gal. You all helped to significantly improve the driver over the last year. Please find below a list of changes and comments, compared to older versions of the siw driver. Many thanks! Bernard. CHANGES: ======== v3 (this version) ----------------- - Rebased to rdma-next - Removed unneccessary initialization of enums in siw-abi.h - Added comment on sizing of all work queues to power of two. v2 ----------------- - Changed recieve path CRC calculation to compute CRC32c not on target buffer after placement, but on original skbuf. This change severely hurts performance, if CRC is switched on, since skb must now be walked twice. It is planned to work on an extension to skb_copy_bits() to fold in CRC computation. - Moved debugging to using ibdev_dbg(). - Dropped detailed packet debug printing. - Removed siw_debug.[ch] files. - Removed resource tracking, code now relies on restrack of RDMA midlayer. Only object counting to enforce reported device limits is left in place. - Removed all nested switch-case statements. - Cleaned up header file #include's - Moved CQ create/destroy to new semantics, where midlayer creates/destroys containing object. - Set siw's ABI version to 1 (was 0 before) - Removed all enum initialization where not needed. - Fixed MAINTANERS entry for siw driver - This version stays with the current siw specific management of user memory (siw_umem_get() vs. ib_umem_get(), etc.). This, since the current ib_umem implementation is less efficient for user page lookup on the fast path, where effciency is important for a SW RDMA driver. It is planned to contribute enhancements to the ib_umem framework, wich makes it suitable for SW drivers as well. v1 (first version after v9 of siw RFC) -------------------------------------- - Rebased to 5.2-rc1 - All IDR code got removed. - Both MR and QP deallocation verbs now synchronously free the resources referenced by the RDMA mid-layer. - IPv6 support was added. - For compatibility with Chelsio iWarp hardware, the RX path was slightly reworked. It now allows packet intersection between tagged and untagged RDMAP operations. While not a defined behavior as of IETF RFC 5040/5041, some RDMA hardware may intersect an ongoing outbound (large) tagged message, such as an multisegment RDMA Read Response with sending an untagged message, such as an RDMA Send frame. This behavior was only detected in an NVMeF setup, where siw was used at target side, and RDMA hardware at client side (during file write). siw now implements two input paths for tagged and untagged messages each, and allows the intersected placement of both messages. - The siw kernel abi file got renamed from siw_user.h to siw-abi.h. ==================== * branch 'siw': SIW addition to kernel build environment SIW completion queue methods SIW receive path SIW transmit path SIW queue pair methods SIW application buffer management SIW application interface SIW connection management SIW network and RDMA core interface SIW main include file iWarp wire packet format
-
Bernard Metzler authored
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by:
Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by:
-
Bernard Metzler authored
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by:
-
Bernard Metzler authored
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by:
-
