Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...

Pull cgroup hierarchy update from Tejun Heo:
 "Currently, different cgroup subsystems handle nested cgroups
  completely differently.  There's no consistency among subsystems and
  the behaviors often are outright broken.

  People at least seem to agree that the broken hierarhcy behaviors need
  to be weeded out if any progress is gonna be made on this front and
  that the fallouts from deprecating the broken behaviors should be
  acceptable especially given that the current behaviors don't make much
  sense when nested.

  This patch makes cgroup emit warning messages if cgroups for
  subsystems with broken hierarchy behavior are nested to prepare for
  fixing them in the future.  This was put in a separate branch because
  more related changes were expected (didn't make it this round) and the
  memory cgroup wanted to pull in this and make changes on top."

* 'for-3.7-hierarchy' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them

Pull cgroup updates from Tejun Heo:

 - xattr support added.  The implementation is shared with tmpfs.  The
   usage is restricted and intended to be used to manage per-cgroup
   metadata by system software.  tmpfs changes are routed through this
   branch with Hugh's permission.

 - cgroup subsystem ID handling simplified.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Define CGROUP_SUBSYS_COUNT according the configuration
  cgroup: Assign subsystem IDs during compile time
  cgroup: Do not depend on a given order when populating the subsys array
  cgroup: Wrap subsystem selection macro
  cgroup: Remove CGROUP_BUILTIN_SUBSYS_COUNT
  cgroup: net_prio: Do not define task_netpioidx() when not selected
  cgroup: net_cls: Do not define task_cls_classid() when not selected
  cgroup: net_cls: Move sock_update_classid() declaration to cls_cgroup.h
  cgroup: trivial fixes for Documentation/cgroups/cgroups.txt
  xattr: mark variable as uninitialized to make both gcc and smatch happy
  fs: add missing documentation to simple_xattr functions
  cgroup: add documentation on extended attributes usage
  cgroup: rename subsys_bits to subsys_mask
  cgroup: add xattr support
  cgroup: revise how we re-populate root directory
  xattr: extract simple_xattr code from tmpfs

Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...

This fixes a local merge conflict resolution done wrong locally in
arm-soc for-next. soc.h was added on a cleanup branch, but the driver
was moved and the header no longer needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
[ .. and I did the same wrong merge, since git automatically does the
  whole rename detection etc, so applying this patch from Olof  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...

Pull ARM soc documentation updates from Olof Johansson:
 "Documentation update for Marvell SoCs, the secret decoder ring to all
  their crazy product names and numbers."

* tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: add documentation describing Marvell families of SoC

Pull ARM soc device tree updates, take 2 from Olof Johansson:
 "This branch contains mostly a set of changes for device tree bindings
  on Samsung Exynos.  It was staged behind the other branches due to
  dependencies on pincontrol and board changes."

Fix up trivial conflict in drivers/clocksource/Makefile due to earlier
conflict resolution.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms
  ARM: EXYNOS: Add AUXDATA support for MSHC controllers
  ARM: EXYNOS: Add support for MSHC controller clocks
  ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
  ARM: dts: use uart2 for console on smdkv310 and smdk5250
  ARM: dts: Add basic dts file for Samsung Trats board
  ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
  ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
  ARM: dts: Assume status of all optional nodes as disabled for exynos4
  ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
  ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi

Pull ARM soc board specific updates from Olof Johansson:
 "Misc board updates:
   - Greg added a handful of boards to KS8695 (since he has stepped up
     to maintain it).
   - Qualcomm has added DT-only board support for a couple of their
     newer SoCs.
   - misc other updates for Samsung and Freescale boards."

Fix up trivial conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
due to gpio device data being added next to hdmi device data that got moved.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: msm: Allow 8960 and 8660 to compile together
  ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist
  ARM: EXYNOS: Add generic PWM lookup support for SMDKV310
  ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12
  ARM: EXYNOS: Use generic pwm driver in Origen board
  ARM: shmobile: armadillo800eva: Add support RTC
  ARM: ks8695: add board support for the OpenGear boards based on the KS8695
  ARM: ks8695: add board support for the SnapGear boards based on the KS8695
  ARM: dts: Add heartbeat gpio-leds support to Origen
  ARM: dts: Use active low flag for gpio-keys on Origen
  ARM: shmobile: marzen: enable thermal sensor
  ARM: shmobile: marzen: fixup regulator id for smsc911x
  ARM: shmobile: marzen: add SDHI0 support
  ARM: mmp: enable debug uart port in defconfig
  ARM: mmp: implement DEBUG_LL port choice
  ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore
  ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore
  ARM: mx27pdk: Add audio support
  ARM: ttc_dkb: add nand support

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...

Pull ARM soc-specific updates, take 2 from Olof Johansson:
 "This branch converts the MXS Freescale platform to use irqdomains and
  sparse IRQ, in preparation for DT probing and multiplatform kernels."

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: remove mach/irqs.h
  ARM: mxs: select SPARSE_IRQ
  ARM: mxs: adopt irq_domain support for icoll driver
  ARM: mxs: select MULTI_IRQ_HANDLER
  ARM: mxs: retrieve timer irq from device tree
  gpio/mxs: adopt irq_domain support for mxs gpio driver

Pull ARM soc cleanups, part 2 from Olof Johansson:
 "A shorter cleanup branch submitted separately due to dependencies with
  some of the previous topics.

  Major thing here is that the Broadcom bcmring platform is removed.
  It's an SoC that's used on some stationary VoIP platforms, and is in
  desperate need of some cleanup.  Broadcom came back and suggested that
  we just deprecate the platform for now, since they aren't going to
  spend the resources needed on cleaning it up, and there are no users
  of the platform directly from mainline."

Fix some conflicts due to BCM2835 getting added next to the removed
BCMRING, and removal of tegra files that had been converted to
devicetree.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
  ARM: ux500: use __iomem pointers for MMIO
  ARM: Remove mach-bcmring
  ARM: clps711x: Remove board support for CEIVA
  ARM: clps711x: Fix register definitions
  ARM: clps711x: Fix lowlevel debug-macro
  ARM: clps711x: Added simple clock framework
  pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl
  ARM: tegra: delete unused headers
  ARM: tegra: remove useless includes of <mach/*.h>
  ARM: tegra: remove dead code

Pull ARM soc device tree updates from Olof Johansson:
 "Device tree conversion and enablement branch.  Mostly a bunch of new
  bindings and setup for various platforms, but the Via/Winchip VT8500
  platform is also converted over from being 100% legacy to now use
  device tree for probing.  More of that will come for 3.8."

Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
  arm: vt8500: Fixup for missing gpio.h
  ARM: LPC32xx: LED fix in PHY3250 DTS file
  ARM: dt: mmp-dma: add binding file
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ...

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

Pull ARM soc MAINTAINERS updates from Olof Johansson:
 "Maintainers updates for KS8965 adding Greg Ungerer, and removing
  myself and Colin Cross as tegra maintainers, since Stephen Warren has
  been handling it on his own for several releases now."

* tag 'maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: ks8695: add maintainers entry
  MAINTAINERS: tegra: remove Olof/Colin, add device tree files
  MAINTAINERS: add defconfig file to TEGRA section

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...

Pull non-critical ARM soc bug fixes from Olof Johansson:
 "These were submitted as bug fixes before v3.6 but not considered
  important enough to be included in it.  Some of them cross over to
  cleanup territory as well, and aren't strictly bugfixes."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: nomadik: remove NAND_NO_READRDY use
  ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
  ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()
  ARM: S3C24XX: removes unnecessary semicolon
  ARM: S3C24xx: delete double assignment
  ARM: EXYNOS: fix address for EXYNOS4 MDMA1
  ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name
  ARM: ep93xx: Move ts72xx.h out of include/mach
  ARM: ep93xx: use __iomem pointers for MMIO
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660
  ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write
  ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save
  dma: tegra: make data used as *of_device_id.data const
  can: mpc5xxx_can: make data used as *of_device_id.data const
  macintosh/mediabay: make data used as *of_device_id.data const
  i2c/mpc: make data used as *of_device_id.data const
  mfd/da9052: make i2c_device_id array const
  ...

Pull CIFS updates from Steve French:
 "This patchset is the final section of the SMB2.1 support merge for
  cifs.ko.  It also includes improvements to the cifs socket handling
  from Jeff, and also fixes a few cifs bug fixes.  It adds SMB2 support
  for file and inode operations as well as moves some existing cifs code
  to use ops server struct of protocol specific callbacks.

  Most of this code is SMB2 specific.  When enabled SMB2.1 does pass
  various functional tests including most of the connectathon test
  suite, For SMB2.1, Connectathon test 4 and some related tests fail due
  to not updating mode bits remotely (cifsacl support where mode bits
  are approximated with the cifs acl is not enable for smb2), and test8
  (symlink) support is not completed for SMB2 yet (note that we will
  likely have a "Unix Extensions" eventually, at least for Samba, so in
  the long run posix locks won't have to be emulated when mounting Linux
  to Linux, but for most NAS and for Windows mounts posix lock emulation
  will still used for SMB2 in a similar fashion as we do for cifs).

  SMB2.1 dialect is supported.  Although additional fixes to enable smb2
  (the original smb2.02) dialect and to add various optional features of
  the smb3 dialect are expected to be added in the future as testing
  progresses, currently mounting with the "vers=2.1" is supported (in
  order to mount using SMB2.1 to servers like Samba 4, and Windows 7,
  Windows 2008R2)."

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: (82 commits)
  [CIFS] Fix indentation of fs/cifs/Kconfig entries
  [CIFS] Fix SMB2 negotiation support to select only one dialect (based on vers=)
  cifs: obtain file access during backup intent lookup (resend)
  CIFS: Fix possible freed pointer dereference in CIFS_SessSetup
  CIFS: Fix possible freed pointer dereference in SMB2_sess_setup
  CIFS: Make ops->close return void
  cifs: change DOS/NT/POSIX mapping of ERRnoresource
  cifs: remove support for deprecated "forcedirectio" and "strictcache" mount options
  cifs: remove support for CIFS_IOC_CHECKUMOUNT ioctl
  CIFS: Fix possible memory leaks in SMB2 code
  CIFS: Fix endian conversion of IndexNumber
  Trivial endian fixes
  MARK SMB2 support EXPERIMENTAL
  Update cifs version number
  cifs: add FL_CLOSE to fl_flags mask in cifs_read_flock
  cifs: Mangle string used for unc in /proc/mounts
  cifs: cleanups for cifs_mkdir_qinfo
  CIFS: Fix fast lease break after open problem
  CIFS: Add SMB2.1 lease break support
  CIFS: Fix cache coherency for read oplock case
  ...

This file has turned out to be a pure write-only file that causes merge
conflicts and has no actual redeeming features.

There is never any reason to add stuff to this idiotic file.  Either
something isn't getting used, and you should just remove it, or there is
no excuse for removing it in the first place.  Just stop the idiocy.

It has also been the excuse for just plain bad behavior ("Hey, I don't
like xyz, so let's mark it for removal" followed by "Hey, look, it been
in feature-removal.txt for six months now, so we should remove it").

The recent bogus setitimer() ABI change request was just the most recent
example of pointless and incorrect mental masturbation involving this
file, and I'm tired of the silly and pointless conflicts in the file.

This removal was discussed during the recent kernel summit, and while
Steven Rostedt suggested we should just enter the file itself in the
feature-removal schedule (to see if anybody who edits the file actually
looks at it), that's cute but non-productive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Conflicts:
	arch/arm/mach-exynos/clock-exynos5.c

Conflicts:
	arch/arm/mach-shmobile/board-armadillo800eva.c

Conflicts:
	arch/arm/boot/dts/omap4.dtsi
	arch/arm/mach-clps711x/common.c
	arch/arm/mach-omap1/board-h2.c
	arch/arm/mach-omap1/board-h3.c
	arch/arm/mach-omap1/leds-h2p2-debug.c
	arch/arm/mach-omap1/leds.c
	arch/arm/mach-pnx4008/time.c
	arch/arm/plat-omap/debug-leds.c
	drivers/Makefile
	drivers/bus/omap_l3_noc.c

Conflicts:
	arch/arm/Kconfig
	arch/arm/Makefile
	arch/arm/mach-bcmring/arch.c
	arch/arm/mach-tegra/devices.c
	arch/arm/mach-tegra/dma.c

Conflicts:
	Documentation/devicetree/bindings/usb/platform-uhci.txt
	arch/arm/mach-vt8500/bv07.c
	arch/arm/mach-vt8500/devices-vt8500.c
	arch/arm/mach-vt8500/devices-wm8505.c
	arch/arm/mach-vt8500/devices.c
	arch/arm/mach-vt8500/devices.h
	arch/arm/mach-vt8500/wm8505_7in.c

Conflicts:
	arch/arm/mach-ux500/clock.c
	arch/arm/mach-ux500/cpu.c
	drivers/clocksource/Makefile

Conflicts:
	drivers/staging/tidspbridge/core/wdt.c
	drivers/usb/host/Kconfig
	drivers/w1/masters/omap_hdq.c

Pull x86/smap support from Ingo Molnar:
 "This adds support for the SMAP (Supervisor Mode Access Prevention) CPU
  feature on Intel CPUs: a hardware feature that prevents unintended
  user-space data access from kernel privileged code.

  It's turned on automatically when possible.

  This, in combination with SMEP, makes it even harder to exploit kernel
  bugs such as NULL pointer dereferences."

Fix up trivial conflict in arch/x86/kernel/entry_64.S due to newly added
includes right next to each other.

* 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, smep, smap: Make the switching functions one-way
  x86, suspend: On wakeup always initialize cr4 and EFER
  x86-32: Start out eflags and cr4 clean
  x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
  x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry
  x86, smap: Reduce the SMAP overhead for signal handling
  x86, smap: A page fault due to SMAP is an oops
  x86, smap: Turn on Supervisor Mode Access Prevention
  x86, smap: Add STAC and CLAC instructions to control user space access
  x86, uaccess: Merge prototypes for clear_user/__clear_user
  x86, smap: Add a header file with macros for STAC/CLAC
  x86, alternative: Add header guards to <asm/alternative-asm.h>
  x86, alternative: Use .pushsection/.popsection
  x86, smap: Add CR4 bit for SMAP
  x86-32, mm: The WP test should be done on a kernel page

Pull ia64 update from Tony Luck:
 "Usual mish-mash of ia64 fixes for next merge window"

* tag 'please-pull-ia64-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] xen: Fix return value check in xencomm_vtop()
  [IA64] Must enable interrupts in do_notify_resume_user before calling tracehook_notify_resume()
  [IA64] kexec: Move the dereference below the NULL test
  [IA64] Fix a node distance bug

Pull m68k updates from Geert Uytterhoeven:
 "All pretty boring, seems like all of us had better things to do last
  summer..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/q40: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/amiga: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/apollo: Remove disabled definitions in apollohw.h

Pull dlm updates from David Teigland:
 "There are two main patches in this set, both related to the userland
  dlm_controld daemon.

  The first fixes a deadlock between dlm_controld and the dlm_send
  workqueue when both access configfs data simultaneously.

  The second reworks some code to get around a long standing, but
  intentional, unlock balance warning.  The userland daemon no longer
  takes a lock that is later released from the kernel.

  The other commits are minor fixes and changes."

* tag 'dlm-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: check the maximum size of a request from user
  dlm: cleanup send_to_sock routine
  dlm: convert add_sock routine return value type to void
  dlm: remove redundant variable assignments
  dlm: fix unlock balance warnings
  dlm: fix uninitialized spinlock
  dlm: fix deadlock between dlm_send and dlm_controld

Pull hwmon updates from Guenter Roeck:
 "New drivers for: MCP3221, ADT7410, MAX197

  Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112,
  MAX1113, INA220, INA230, MCP3221

  Cleanup: Use devm_ functions, fixed build warnings, removed deprecated
  sysfs attributes, code simplifications, dropped dependencies on
  EXPERIMENTAL"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
  hwmon: (mcp3021) Add MCP3221 support
  hwmon: (mcp3021) Prepare MCP3021 driver to support other chips
  hwmon: (w83791d) Drop unnecessary compare statements
  hwmon: (lm93) Drop unnecessary compare statement
  hwmon: (lm70) Simplify show_name function
  hwmon: (adcxx) Simplify show_name function
  hwmon: Drop dependencies on EXPERIMENTAL
  hwmon: (it87) Fix Kconfig for IT87 driver
  hwmon: (sht15) move header to linux/platform_data/
  hwmon: (asus_atk0110) Remove useless kfree
  hwmon: (ina2xx) Add support for INA220 and INA230
  hwmon: (ina2xx) Use structure array to distinguish chip types
  hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113
  hwmon: (lm70) Add support for LM71 and LM74
  hwmon: (Documentation) Update feature-removal-schedule.txt
  hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes
  hwmon: (w83792d) Remove legacy chassis intrusion detection attributes
  hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute
  hwmon: (lm70) Allow 4wire SPI bus with LM70
  hwmon: (sht15) remove multiple driver registration
  ...

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a2 for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

Pull staging tree update from Greg Kroah-Hartman:
 "Here is the big staging tree update for the 3.7-rc1 merge window.

  There are a few patches in here that are outside of the staging area,
  namely HID and IIO patches, but all of them have been acked by the
  relevant subsystem maintainers.  The IIO stuff is still coming in
  through this tree as it hasn't entirely moved out of the staging tree,
  but is almost there.

  Other than that, there wa a ton of work on the comedi drivers to make
  them more readable and the correct style.  Doing that removed a lot of
  code, but we added a new driver to the staging tree, so we didn't end
  up with a net reduction this time around:

   662 files changed, 51649 insertions(+), 26582 deletions(-)

  All of these patches have been in the linux-next tree already.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
  staging: comedi: jr3_pci: fix iomem dereference
  staging: comedi: drivers: use comedi_fc.h cmdtest helpers
  Staging: winbond: usb_free_urb(NULL) is safe
  Staging: winbond: checkpatch cleanup
  Staging: winbond: Removed undesired spaces, lines and tabs
  Staging: winbond: Typo corrections in comments
  Staging: winbond: Changed c99 comments to c89 comments
  staging: r8712u: Do not queue cloned skb
  staging: comedi: ni_mio_common: always lock in ni_ai_poll()
  staging: comedi: s626: add FIXME comment
  staging: comedi: s626: don't dereference insn->data
  staging: comedi: s526: fix if() check in s526_gpct_winsn()
  staging: comedi: s626: cleanup comments in s626_initialize()
  staging: comedi: s626: remove clear of kzalloc'ed data
  staging: comedi: s626: remove 'WDInterval' from private data
  staging: comedi: s626: remove 'ChargeEnabled' from private data
  staging: comedi: s626: remove 'IsBoardRevA' comment
  staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
  staging: comedi: s626: remove 'allocatedBuf' from private data
  staging: comedi: s626: add final attach message
  ...

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...

Pull char/misc driver merge from Greg Kroah-Hartman:
 "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
  window.

  Nothing major, just a number of driver updates and fixes, all of which
  have been in the linux-next releases for a while now either in my
  tree, or in Andrew's (the lis3l driver changes came from his tree last
  week).

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits)
  drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d: remove lis3lv02d driver DT init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code
  drivers/misc/lis3lv02d: add generic DT matching code
  lis3lv02d: fix some comments specific to lis331dlh driver
  MISC: hpilo, remove pci_disable_device
  pcmcia: synclink_cs: fix potential tty NULL dereference
  drivers/char/mmtimer.c: Remove useless kfree
  drivers/char: removes unnecessary semicolon
  char/misc: remove CONFIG_EXPERIMENTAL dependencies
  mei: don't print buffer as a string
  mei: struct mei_message_data doesn't have to be packed
  mei: add error messages for open count errors
  misc: use module_spi_driver
  tifm: use module_pci_driver
  misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
  mei: add lynx point pci device ids
  mei: fix max number of open handles
  mei: rename struct pci_dev *mei_device to mei_pdev
  ...

Pull clk framework update from Michael Turquette:
 "The common clk framework changes for 3.7 are dominated by ARM platform
  ports to the framework along with one MIPS port, one MFD port, one
  minor framework enhancement and one helper function for platforms
  expressing their clock data through device tree."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: add of_clk_src_onecell_get() support
  clk: ux500: Define smp_twd clock for u8500
  mfd: dbx500: Provide a more accurate smp_twd clock
  clk: ux500: Support for prmcu_rate clock
  clk: Provide option for clk_get_rate to issue hw for new rate
  clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
  ARM: ux500: Switch to use common clock framework
  clk: ux500: Clock definitions for u8500
  clk: ux500: First version of clock definitions for ux500
  clk: ux500: Adapt PRCMU and PRCC clocks for common clk
  clk: versatile: make config option boolean
  clk: add Loongson1B clock support
  arm: mmp: make all SOCs use common clock by default
  clk: mmp: add clock definition for mmp2
  clk: mmp: add clock definition for pxa910
  clk: mmp: add clock definition for pxa168
  clk: mmp: add mmp specific clocks
  clk: convert ARM RealView to common clk
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree