- 14 Aug, 2023 2 commits
-
-
Bryan O'Donoghue authored
The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names. The ov5640 has depended on these names since the driver was committed upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different regulator names since its own initial commit in 2020. Perhaps the regulators were left on in previous 410c bootloaders. In any case today on 6.5 we won't switch on the ov5640 without correctly naming the regulators. Fixes: 39e0ce6c ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes") Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Bryan O'Donoghue authored
Each CSIPHY in CAMMS maps to a port here in the dtsi, since the number of CSIPHYs is fixed per SoC define the 8916 ports for both available PHYs. Signed-off-by:
-
- 11 Aug, 2023 13 commits
-
-
Sricharan Ramabadhran authored
Add initial device tree support for the Qualcomm IPQ5018 SoC and rdp432-c2 board. Few things like 'reboot' does not work because, couple of more 'SCM' APIS are needed to clear some TrustZone settings. Those will be posted separately. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by:
Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by:
Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-6-git-send-email-quic_srichara@quicinc.comSigned-off-by:
-
Sricharan Ramabadhran authored
Document the new ipq5018 SOC/board device tree bindings. Reviewed-by:
-
Bjorn Andersson authored
Merge the IPQ5018 GCC Devicetree binding through a topic branch, in order to the the clock defines.
-
Sricharan Ramabadhran authored
This patch adds support for the global clock controller found on the IPQ5018 based devices. Reviewed-by:
-
Bartosz Golaszewski authored
Enable the second MAC on sa8775p-ride. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
Once we add a second ethernet node, the MDIO bus names will conflict unless we provide aliases. Add one for the existing ethernet node. Signed-off-by:
-
Bartosz Golaszewski authored
For improved readability order the aliases alphabetically for sa8775p-ride. Signed-off-by:
-
Bartosz Golaszewski authored
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride. Signed-off-by:
-
Bartosz Golaszewski authored
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index the first one for better readability. Signed-off-by:
-
Bartosz Golaszewski authored
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a global reset-gpios property at the MDIO node level which controls all devices on the bus. The latter is most likely a workaround for the chicken-and-egg problem where we cannot read the ID of the PHY before bringing it out of reset but we cannot bring it out of reset until we've read its ID. I have proposed a comprehensive solution for this problem in 2020 but it never got upstream. We do however have workaround in place which allows us to hard-code the PHY id in the compatible property, thus skipping the ID scanning. Let's make the device-tree for sa8775p-ride slightly more correct by moving the reset-gpios property to the PHY node with its ID put into the PHY node's compatible. Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/Signed-off-by:
-
Bartosz Golaszewski authored
Enable the second SerDes PHY on sa8775p-ride development board. Signed-off-by:
-
Bartosz Golaszewski authored
Add a node for the second MAC on sa8775p platforms. Signed-off-by:
-
Bartosz Golaszewski authored
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride. Signed-off-by:
-
- 10 Aug, 2023 2 commits
-
-
Bryan O'Donoghue authored
Enable CAMSS on the standard RB3 as it is possible to run the test pattern generator (TPG) without any populated ports/endpoints. media-ctl --reset yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4 yavta --list /dev/v4l-subdev4 media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -p yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464 --file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2 Signed-off-by:
-
Eric Chanudet authored
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in: https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/ Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations: commit e67b4558 ("arm64: dts: qcom: sc8280xp-crd: enable rtc") On SA8540P-ride, the register bank SDAM6 of the first PMIC is not writable. Following recommendations provided during the review, use SDAM2 from the second PMIC at offset 0xa0 instead. Reviewed-by:
Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by:
Eric Chanudet <echanude@redhat.com> Link: https://lore.kernel.org/r/20230809203506.1833205-1-echanude@redhat.comSigned-off-by:
-
- 04 Aug, 2023 3 commits
-
-
Richard Acayan authored
Add the coefficients for the CPU frequencies to aid in frequency scaling. Profiling setup: - freqbench (https://github.com/kdrag0n/freqbench) - LineageOS kernel, android_kernel_google_msm-4.9 - recommended configuration options by freqbench - disabled options that require clang or 32-bit compilers - mmc governor switched from simple_ondemand to powersave Frequency domains: cpu1 cpu6 Offline CPUs: cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 Sampling power every 1000 ms Baseline power usage: 445 mW ===== CPU 1 ===== Frequencies: 300 576 748 998 1209 1324 1516 1612 1708 300: 1114 3.7 C/MHz 43 mW 11.6 J 25.8 I/mJ 269.4 s 576: 2138 3.7 C/MHz 51 mW 7.1 J 42.2 I/mJ 140.3 s 748: 2780 3.7 C/MHz 67 mW 7.3 J 41.3 I/mJ 107.9 s 998: 3706 3.7 C/MHz 73 mW 5.9 J 51.1 I/mJ 80.9 s 1209: 4490 3.7 C/MHz 86 mW 5.7 J 52.2 I/mJ 66.8 s 1324: 4918 3.7 C/MHz 90 mW 5.5 J 54.6 I/mJ 61.0 s 1516: 5631 3.7 C/MHz 103 mW 5.5 J 54.9 I/mJ 53.3 s 1612: 5987 3.7 C/MHz 109 mW 5.5 J 55.0 I/mJ 50.1 s 1708: 6344 3.7 C/MHz 126 mW 5.9 J 50.5 I/mJ 47.3 s ===== CPU 6 ===== Frequencies: 300 652 825 979 1132 1363 1536 1747 1843 1996 300: 1868 6.2 C/MHz 53 mW 8.5 J 35.2 I/mJ 160.6 s 652: 4073 6.2 C/MHz 96 mW 7.1 J 42.4 I/mJ 73.7 s 825: 5132 6.2 C/MHz 117 mW 6.9 J 43.7 I/mJ 58.5 s 979: 6099 6.2 C/MHz 151 mW 7.4 J 40.4 I/mJ 49.2 s 1132: 7071 6.2 C/MHz 207 mW 8.8 J 34.1 I/mJ 42.4 s 1363: 8482 6.2 C/MHz 235 mW 8.3 J 36.1 I/mJ 35.4 s 1536: 9578 6.2 C/MHz 287 mW 9.0 J 33.3 I/mJ 31.3 s 1747: 10892 6.2 C/MHz 340 mW 9.4 J 32.0 I/mJ 27.6 s 1843: 11471 6.2 C/MHz 368 mW 9.6 J 31.1 I/mJ 26.2 s 1996: 12425 6.2 C/MHz 438 mW 10.6 J 28.3 I/mJ 24.2 s Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20230802011548.387519-10-mailingradian@gmail.comSigned-off-by:
-
Richard Acayan authored
Add CPU frequency scaling, and also add the corresponding memory and cache bandwidths for each frequency. Signed-off-by:
-
Richard Acayan authored
Add the interconnect node for L3 cache on SDM670. Signed-off-by:
-
- 03 Aug, 2023 6 commits
-
-
Marijn Suijten authored
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property. Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405. [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/Acked-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.orgSigned-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier "interleave_mode" property was never documented. Corrected bindings expect "maxim,interleave-mode" instead, which is already supported by Linux driver. Change is not compatible with older Linux kernels. Signed-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier has only one DAI, so DAI cells can be just 0 (as expected by bindings). Signed-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier has only one DAI, so DAI cells can be just 0 (as expected by bindings). Signed-off-by:
-
Krzysztof Kozlowski authored
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. Signed-off-by:
-
Abel Vesa authored
Even though currently there is no consumer for L1B, add the supply for it anyway. Fixes: 71342fb9 ("arm64: dts: qcom: Add base SM8550 MTP dts") Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230801095246.2884770-1-abel.vesa@linaro.orgSigned-off-by:
-
- 31 Jul, 2023 6 commits
-
-
Tengfei Fan authored
Add DTS for Qualcomm QRD platform which uses SM4450 SoC. Reviewed-by:
Tengfei Fan <quic_tengfan@quicinc.com> Link: https://lore.kernel.org/r/20230731080043.38552-5-quic_tengfan@quicinc.comSigned-off-by:
-
Tengfei Fan authored
Add based DTSI for SM4450 SoC and includes base description of CPUs and interrupt-controller which helps to boot to shell with dcc console on boards with this SoC. Reviewed-by:
-
Tengfei Fan authored
Document the SM4450 SoC binding and also the boards using it. Reviewed-by:
-
Neil Armstrong authored
Add nodes to support Type-C USB/DP functionality. On this platform, a Type-C redriver is added to the SuperSpeed graph. Signed-off-by:
-
Neil Armstrong authored
Add nodes to support Type-C USB/DP functionality. Signed-off-by:
-
Neil Armstrong authored
Add the USB3+DP Combo QMP PHY port subnodes in the SM8550 SoC DTSI to avoid duplication in the devices DTs. Reviewed-by:
-
- 28 Jul, 2023 3 commits
-
-
Zeyan Li authored
I2C6 and I2C7 use the same interrupts, which is incorrect. In the downstream kernel, I2C7 has interrupts of 608 instead of 607. Fixes: 81bee695 ("arm64: dts: qcom: sm8150: add i2c nodes") Signed-off-by:
Zeyan Li <qaz6750@outlook.com> Reviewed-by:
-
Stephan Gerhold authored
A7 seems to have external pull-up for the SD card chip detect (like most MSM8916/MSM8939 devices) so drop the internal pull-up. It's not necessary. Tested-by:
"Lin, Meng-Bo" <linmengbo0689@protonmail.com> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230723-a7sdc2cdnopull-v1-1-699fd730afcb@gerhold.netSigned-off-by:
-
Alexander Stein authored
Use id-gpios and vbus-gpios instead. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Acked-by:
-
- 22 Jul, 2023 5 commits
-
-
Krzysztof Kozlowski authored
Bindings expect the LPG node name to be "pwm": sc8180x-lenovo-flex-5g.dtb: pmic@5: 'lpg' does not match any of the regexes: Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Bindings expect the Power-on node name to be "pon": sc8180x-lenovo-flex-5g.dtb: pmic@0: 'power-on@800' does not match any of the regexes: Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
The GPIO children of PMICs should use gpio-ranges: sc8180x-primus.dtb: pmic@0: gpio@c000: 'gpio-ranges' is a required property Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
The GPIO children of PMICs should use qcom,spmi-gpio fallback: sc8180x-primus.dtb: pmic@0: gpio@c000:compatible: ['qcom,pmc8180-gpio'] is too short Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
Synaptics RMI4 Touchscreen bindings never defined syna,codes property for function 1a. No usage in Linux drivers. Signed-off-by:
-
