The patch needs to eliminate the definition of OCTEON_IRQ_BOOTDMA so
that the device tree code can map the interrupt, so in order to not
temporarily break things, we do a single patch to both the interrupt
registration code and the pata_octeon_cf driver.

Also rolled in is a conversion to use hrtimers and corrections to the
timing calculations.
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David Daney <david.daney@cavium.com>

Manuel Lauss <manuel.lauss@gmail.com> writes:

I introduced it as a fallback because early revisions of Alchemy hardware
we shipped had a non-functional 32kHz timer and had to rely on the r4k
timer instead.  Previously the r4k timer was initialized regardless, but
it's useless with the "wait" instruction.

So long story short:   I need either the on-chip 32kHz timer OR the r4k
timer if the 32kHz one is unusable, but not both, and r4k timer is useless
when au1k_idle is in use.

The current in-kernel Alchemy boards all work with the 32kHz timer, so I'm
not against removing R4K_LIB symbols.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Manuel Lauss <manuel.lauss@gmail.com> writes:

I introduced it as a fallback because early revisions of Alchemy hardware
we shipped had a non-functional 32kHz timer and had to rely on the r4k
timer instead.  Previously the r4k timer was initialized regardless, but
it's useless with the "wait" instruction.

So long story short:   I need either the on-chip 32kHz timer OR the r4k
timer if the 32kHz one is unusable, but not both, and r4k timer is useless
when au1k_idle is in use.

The current in-kernel Alchemy boards all work with the 32kHz timer, so I'm
not against removing R4K_LIB symbols.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch changes the physmap-flash platform data on AR7 to pass the
correct partition parser: ar7part to used by the "physmap-flash" mapping
driver so we get the partitions probed correctly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: blogic@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4654/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct spelling typo ENDIANESS to ENDIANNESS in arc/mips/lantiq/xway/dma.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: trivial@kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4613/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

With the upcoming merge of the ARC architecture there is a small likelyhood
of conflicting use for the CONFIG_ARC config symbol.  Rename it to
CONFIG_FW_ARC.  Also rename CONFIG_ARC32 to CONFIG_FW_ARC32, CONFIG_ARC64
to CONFIG_FW_ARC64.

For consistence also rename CONFIG_SNIPROM to CONFIG_FW_SNIPROM and
CONFIG_CFE to CONFIG_FW_CFE.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: Original patch by Maxim Uvarov <muvarov@gmail.com>
with plenty of further shining, polishing, debugging and testing by me.]
Signed-off-by: Maxim Uvarov <muvarov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: kexec@lists.infradead.org
Cc: horms@verge.net.au
Patchwork: https://patchwork.linux-mips.org/patch/1026/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: Original patch by Maxim Uvarov <muvarov@gmail.com>
with plenty of further shining, polishing, debugging and testing by me.]
Signed-off-by: Maxim Uvarov <muvarov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: kexec@lists.infradead.org
Cc: horms@verge.net.au
Patchwork: https://patchwork.linux-mips.org/patch/1025/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This allows the use of /sys/firmware/memmap for MIPS platforms.
kexec-tools may use /sys/firmware/memmap though current versions parse
/proc/iomem.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The actual bug is a missing else statement - but really this should be
expressed using a switch() statement.

Found by Al Viro who writes "the funny thing is, it *does* work only
because r2 is syscall number and syscall number around 512 => return
value being ENOSYS and not one of ERESTART...  so we really can't hit
the first if and emerge from it with ERESTART_RESTARTBLOCK.  still
wrong to write it that way..."
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2957c9e6 (kernel.org) rsp.
b934da913f236bca00c41d9e386e980586000461 (lmo) [[MIPS] IRIX: Goodbye and
thanks for all the fish] left two fields in struct thread_struct which
were only being used for the IRIX compat code.  Remove them.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

No 32-bit kernels supported on Octeon.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Only supporting 64-bit kernels there is no point in depending on
this symbol.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On Cavium hardware only 64-bit kernels are supported so CONFIG_HIGHMEM
is never set.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Turn on support for most hardware present on OCTEON development boards
as well as some filesystems and SATA controllers so we can boot off of
a disk or CF
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4426/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Drivers for EDAC on Cavium.  Supported subsystems are:

 o CPU primary caches.  These are parity protected only, so only error
   reporting.
 o Second level cache - ECC protected, provides SECDED.
 o Memory: ECC / SECDEC if used with suitable DRAM modules.  The driver will
   will only initialize if ECC is enabled on a system so is safe to run on
   non-ECC memory.
 o PCI: Parity error reporting

Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>

We need Huge TLBs for HUGETLB_PAGE, or the soon to follow
TRANSPARENT_HUGEPAGE.  collect this information under a single Kconfig
symbol.
Signed-off-by: David Daney <david.daney@cavium.com>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pgtable bits are assigned dynamically depending on processor feature and
statically based on kernel configuration.  To make sense out of the
disassembled TLB exception handlers a list of the actual assignments
used for a particular configuration and hardware setup can be very useful.

Output the actual TLB exception handlers in a format that simplifies their
post processsing from dmesg output.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

From a software perspective R5000 and R5000A are the same thing which is
why the symbol CPU_R5000A never got used, so finally delete it.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull powerpc EEH bugfixes from Benjamin Herrenschmidt.

Two one-liner fixes for the new EEH code.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Do not invalidate PE properly
  powerpc/pseries: Fix oops with MSIs when missing EEH PEs

Pull MIPS fixes from Ralf Baechle:
 "Three issues fixed accross the field:

   - Some functions that were recently outlined as part of a preemption
     fix were causing problems with function tracing.
   - The recently merged in-kernel MPI library uses very outdated
     headers that contain MIPS-specific code which won't build on with
     gcc 4.4 or newer.
   - The MIPS non-NUMA memory initialization was making only a very
     half-baked attempt at merging adjacent memory ranges.  This kept
     the code simple enough but is now causing issues with kexec."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges

While the EEH does recovery on the specific PE that has PCI errors,
the PCI devices belonging to the PE will be removed and the PE will
be marked as invalid since we still need the information stored in
the PE. We only invalidate the PE when it doesn't have associated
EEH devices and valid child PEs. However, the code used to check
that is wrong. The patch fixes that.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull sound build error fix from Takashi Iwai:
 "Only a single commit for fixing the build error without CONFIG_PM in
  hda driver."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix build without CONFIG_PM

I forgot this again...  codec->in_pm is in #ifdef CONFIG_PM
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull x86 arch fixes from Peter Anvin:
 "Here is a collection of fixes for 3.7-rc7.  This is a superset of
  tglx' earlier pull request."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix ordering of CFI directives and recent ASM_CLAC additions
  x86, microcode, AMD: Add support for family 16h processors
  x86-32: Export kernel_stack_pointer() for modules
  x86-32: Fix invalid stack address while in softirq
  x86, efi: Fix processor-specific memcpy() build error
  x86: remove dummy long from EFI stub
  x86, mm: Correct vmflag test for checking VM_HUGETLB
  x86, amd: Disable way access filter on Piledriver CPUs
  x86/mce: Do not change worker's running cpu in cmci_rediscover().
  x86/ce4100: Fix PCI configuration register access for devices without interrupts
  x86/ce4100: Fix reboot by forcing the reboot method to be KBD
  x86/ce4100: Fix pm_poweroff
  MAINTAINERS: Update email address for Robert Richter
  x86, microcode_amd: Change email addresses, MAINTAINERS entry
  MAINTAINERS: Change Boris' email address
  EDAC: Change Boris' email address
  x86, AMD: Change Boris' email address

Pull MTD fixes from David Woodhouse:
 "The most important part of this is that it fixes a regression in
  Samsung NAND chip detection, introduced by some rework which went into
  3.7.  The initial fix wasn't quite complete, so it's in two parts.  In
  fact the first part is committed twice (Artem committed his own copy
  of the same patch) and I've merged Artem's tree into mine which
  already had that fix.

  I'd have recommitted that to make it somewhat cleaner, but figured by
  this point in the release cycle it was better to merge *exactly* the
  commits which have been in linux-next.

  If I'd recommitted, I'd also omit the sparse warning fix.  But it's
  there, and it's harmless — just marking one function as 'static' in
  onenand code.

  This also includes a couple more fixes for stable: an AB-BA deadlock
  in JFFS2, and an invalid range check in slram."

* tag 'for-linus-20121123' of git://git.infradead.org/mtd-2.6:
  mtd: nand: fix Samsung SLC detection regression
  mtd: nand: fix Samsung SLC NAND identification regression
  jffs2: Fix lock acquisition order bug in jffs2_write_begin
  mtd: onenand: Make flexonenand_set_boundary static
  mtd: slram: invalid checking of absolute end address
  mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions()
  mtd: nand: fix Samsung SLC NAND identification regression

Pull device tree regression fix from Grant Likely:
 "Simple build regression fix for DT device drivers on Sparc.  An
  earlier change had masked out the of_iomap() helper on SPARC."

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  of/address: sparc: Declare of_iomap as an extern function for sparc again

Pull power management update from Rafael Wysocki:
 "Fix for an incorrect error condition check in device PM QoS code that
  may lead to an Oops from Guennadi Liakhovetski."

* tag 'pm-for-3.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: fix wrong error-checking condition

Pull md fixes from NeilBrown:
 "Several bug fixes for md in 3.7:

   - raid5 discard has problems
   - raid10 replacement devices have problems
   - bad block lock seqlock usage has problems
   - dm-raid doesn't free everything"

* tag 'md-3.7-fixes' of git://neil.brown.name/md:
  md/raid10: decrement correct pending counter when writing to replacement.
  md/raid10: close race that lose writes lost when replacement completes.
  md/raid5: Make sure we clear R5_Discard when discard is finished.
  md/raid5: move resolving of reconstruct_state earlier in stripe_handle.
  md/raid5: round discard alignment up to power of 2.
  md: make sure everything is freed when dm-raid stops an array.
  md: Avoid write invalid address if read_seqretry returned true.
  md: Reassigned the parameters if read_seqretry returned true in func md_is_badblock.

Pull block layer fixes from Jens Axboe:
 "Distilled down version of bug fixes for 3.7.  The patches have been
  well tested.  If you notice that commit dates are from today, it's
  because I pulled less important bits out and shuffled them into the
  3.8 mix.  Apart from that, no changes, base still the same.

  It contains:

   - Fix for aoe, don't run request_fn while it's plugged.

   - Fix for a regression in floppy since 3.6, which causes problems if
     no floppy is found.

   - Stable fix for blk_exec(), don't touch a request after it has been
     sent to the scheduler (and the device as well).

   - Five fixes for various nasties in mtip32xx."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Don't access request after it might be freed
  mtip32xx: Fix padding issue
  aoe: avoid running request handler on plugged queue
  mtip32xx: fix potential NULL pointer dereference in mtip_timeout_function()
  mtip32xx: fix shift larger than type warning
  mtip32xx: Fix incorrect mask used for erase mode
  mtip32xx: Fix to make lba address correct in big-endian systems
  mtip32xx: fix potential crash on SEC_ERASE_UNIT
  dm: fix deadlock with request based dm and queue request_fn recursion
  floppy: destroy floppy workqueue before cleaning up the queue

This bug-fix makes sure that of_iomap is defined extern for sparc so that the
sparc-specific implementation of_iomap is once again used when including
include/linux/of_address.h in a sparc context. OF_GPIO that is now available for
sparc relies on this.

The bug was inadvertently introduced in a850a755, "of/address: add empty static
inlines for !CONFIG_OF", that added a static dummy inline for of_iomap when
!CONFIG_OF_ADDRESS. However, CONFIG_OF_ADDRESS is never defined for sparc, but
there is a sparc-specific implementation /arch/sparc/kernel/of_device_common.c.

This fix takes the same approach as 0bce04be that solved the equivalent problem
for of_address_to_resource.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Pull omapdss fixes from Tomi Valkeinen:
 "Here are a few OMAPDSS fixes for the next -rc.  I'm sending these
  directly to you, and quite late, as the fbdev tree maintainer
  (Florian) has been busy with his work and hasn't had time to manage
  the fb patches."

* tag 'omapdss-for-3.7-rc' of git://gitorious.org/linux-omap-dss2/linux:
  OMAPDSS: do not fail if dpll4_m4_ck is missing
  OMAPFB: Fix possible null pointer dereferencing
  OMAPDSS: HDMI: fix missing unlock on error in hdmi_dump_regs()
  omapdss: dss: Fix clocks on OMAP363x
  OMAPDSS: DSI: fix dsi_get_dsidev_from_id()

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for the i2c subsystem.

  Except for a few one-liners, there is mainly one revert because of an
  overlooked dependency.  Since there is no linux-next at the moment, I
  did some extra testing, and all was fine for me."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Fix code to free gpios
  i2c: omap: ensure writes to dev->buf_len are ordered
  Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"
  i2c: at91: fix SMBus quick command

Pull sound fixes from Takashi Iwai:
 "The highlight of this update is the fixes for ASoC kirkwood by
  Russell.  In addition to that, a couple of regression fixes for
  HD-audio due to the runtime PM support on 3.7, and other driver-
  specific regression fixes like USB MIDI on non-standard USB audio
  drivers."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: snd-usb: properly initialize the sync endpoint
  ALSA: hda - Cirrus: Correctly clear line_out_pins when moving to speaker
  ALSA: hda - Add support for Realtek ALC292
  ASoC: kirkwood-i2s: more pause-mode fixes
  ASoC: kirkwood-i2s: fix DMA underruns
  ASoC: kirkwood-i2s: fix DCO lock detection
  ASoC: kirkwood-dma: don't ignore other irq causes on error
  ASoC: kirkwood-dma: fix use of virt_to_phys()
  ALSA: hda - Limit runtime PM support only to known Intel chips
  ALSA: hda - Fix recursive suspend/resume call
  ALSA: ua101, usx2y: fix broken MIDI output
  ASoC: arizona: Fix typo - Swap value in 48k_rates[] and 44k1_rates[]
  ASoC: bells: Fix up git patch application failure
  ASoC: cs4271: free allocated GPIO

Pull networkign fixes from David Miller:
 "Networking bug fixes, Cacio e Pepe edition:

  1) BNX2X accidently accesses chip rev specific registers without an
     appropriate guard, fix from Ariel Elior.

  2) When we removed the routing cache, we set ip_rt_max_size to ~0 just
     to keep reporting a value to userspace via sysfs.  But the ipv4
     IPSEC layer was using this to tune itself which is completely bogus
     to now do.  Fix from Steffen Klassert.

  3) Missing initialization in netfilter ipset code from Jozsef
     Kadlecsik.

  4) Check CTA_TIMEOUT_NAME length properly in netfilter cttimeout code,
     fix from Florian Westphal.

  5) After removing the routing cache, we inadvertantly are caching
     multicast routes that end up looping back locally, we cannot do
     that legitimately any more.  Fix from Julian Anastasov.

  6) Revert a race fix for 8139cp qemu/kvm that doesn't actually work
     properly on real hardware.  From Francois Romieu.

  7) Fixup errors in example command lines in VXLAN device docs."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  ipv4: do not cache looped multicasts
  netfilter: cttimeout: fix buffer overflow
  netfilter: ipset: Fix range bug in hash:ip,port,net
  xfrm: Fix the gc threshold value for ipv4