- 21 Dec, 2012 40 commits
-
-
Manjunath Hadli authored
add build infrastructure for dm365 specific modules for VPFE capture driver. Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manjunath Hadli authored
Add the video resizer driver with the v4l2 media controller framework which takes care of resizing the video frames with both up-scaling downscaling facility. The driver supports both continuous and single shot operations.The driver supports resizer as a subdevice and a media entity. It has support for 2 resizers - resizerA and resizerB. Signed-off-by:
-
Manjunath Hadli authored
IPIPE is the hardware IP which implements the functionality required for resizer, ipipe(colorspace converter) and the associated hardware support. This patch implements hardware setup including coefficient programming for various hardware filters, gamma, cfa and clock enabling. Signed-off-by:
-
Manjunath Hadli authored
Add the IPIPE subdevice to the DM365 vpfe driver. The IPIPE is the major sub IP in the DM365 capture VPFE hardware and implements black clamping, color space conversion, edge enhancements etc. the block is exposed as a subdevice and implements media controller based setup and a private IOCTL for fine grain control. Signed-off-by:
-
Manjunath Hadli authored
add support for ISIF as a subdevice for dm365 vpfe capture driver. ISIF is responsible for capturing video data both in raw bayer format on sync seperate signals and YUV through BT656/1120 interfaces. ISIF is exposed as a subdev for the vpfe driver and allows users to use the driver through standard media controller interface. Signed-off-by:
-
Manjunath Hadli authored
add support for dm365 IPIPEIF driver based on media framework. The IPIPEIF is exposed as a subdev, and it supports features like fault pixel correction, dark frame subtraction and other necessary hardware setup. Signed-off-by:
-
Manjunath Hadli authored
Add a generic video driver functionality to be used by all the vpfe drivers for davinci SoCs. The functionality includes all the standard v4l2 interfaces including streaming. The video node interface can be used both as an input and output node for both continuous and single shot modes. Also supports dv_presets to include HD modes, wth support for both user pointer IO and mmap. The buffering mechanism is based on videobuf2 interface. Signed-off-by:
-
Manjunath Hadli authored
Add the vpfe capture driver which implements media controller interface. The driver supports the DM365 sub ip units for capture namely - ISIF, IPIPE, IPIPEIF, Resizer. This file represents the main driver which does isr registration, v4l2 device registration, media registration and platform driver registrations. It calls the appropriate subdevs from here to create subdevices and media entities. Signed-off-by:
-
Manjunath Hadli authored
Add vpss helper functions to be used in the main driver for setting hardware parameters. Add interface functions to set sync polarity, interrupt completion and pageframe size in vpss to be used by the main driver. Signed-off-by:
-
Manjunath Hadli authored
request_mem_region for VPSS_CLK_CTRL register and ioremap. and enable clocks appropriately. Signed-off-by:
-
Manjunath Hadli authored
enable the clocks required for VPFE to work in PCCR register, and enbale ISIF out on BCR to get the correct operation from ISIF. Signed-off-by:
-
Sylwester Nawrocki authored
Make the pipeline try format routine more generic to support any number of subdevs in the pipeline, rather than hard coding it for only a sensor, MIPI-CSIS and FIMC subdevs and the FIMC video node. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans de Goede authored
We already have the same delay in i2c_w8, but it was missing from i2c_w1, adding this delay fixes the Microsoft VX-3000 camera often (but not always) streaming video data with a very green-ish tint. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
We must wait for the previous i2c write to complete before starting a new one. Sofar we were getting away with this, but it seems that some parts of the usb-subsystem has been sped up making us go to fast :) This fixes streaming on sn9c103 based cams not working with an "i2c_w error" error. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Erik Andrén authored
Disable the hardware VFLIP and HFLIP controls for now as we lack a mechanism to adjust the frame offset, thus rending a bayerimage not compliant with the announced format. Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
Sachin Kamat authored
module_usb_driver eliminates a lot of boilerplate by replacing module_init() and module_exit() calls. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Jacob Schloss authored
Add the USB ID for the Kinect for Windows RGB camera so it can be used with the gspca_kinect driver. Signed-off-by:
Jacob Schloss <jacob.schloss@unlimitedautomata.com> Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Hans de Goede authored
When the v4l1 drivers were removed, there docs were forgotten. Signed-off-by:
-
Hans de Goede authored
The stk-webcam module is inserted upside-down in some webcams, so we need to de hflip and vflip by default on some models. Note that this patch inverts the value of the controls as reported by the control API in this case so that for the user they still make sense (iow not doing any flipping from the ctrl API pov results in an upright image). Reported-by:
Jose Gómez <adler@dreamcoder.org> Signed-off-by:
-
Hans de Goede authored
Some cams have their led connected in such a way that on = off and visa versa unfortunately we cannot tell this from the driver in any way, so add a module parameter for this. Reported-by:
Yuri Glushkov <yglushkov@yahoo.com> Signed-off-by:
-
Jean-François Moine authored
Setting the H and V flip controls at webcam connection time prevents the webcam to work correctly. This patch checks if the webcam is streaming before setting the flips. It does not set the flips (nor other controls) at webcam start time. Tested-by:
Philippe ROUBACH <philippe.roubach@free.fr> Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Andrzej Hajda authored
Some sensors can have more than one pad (case of S5C73M3). In such cases FIMC assumes the last pad of the sensor is the source pad. Signed-off-by:
-
Sylwester Nawrocki authored
Add second source media pad for the FIFO data output to FIMC-IS and implement subdev s_stream op for configurations where FIMC-LITE is used as a glue logic between FIMC-IS and MIPI-CSIS or an image sensor. The second source media pad will be linked to the FIMC-LITE video node. For proper configuration the attached image sensor/video encoder properties are needed, like video bus type, signal polarities, etc. For this purpose there is a small routine added that walks the pipeline and returns the sensor subdev. Signed-off-by:
-
Sylwester Nawrocki authored
Add subdev group id definition for FIMC-IS ISP and sensor subdev. While at it rename all group id definitions to start with GRP_ID. Signed-off-by:
-
Sylwester Nawrocki authored
Dump registers contents together with the event counters state in VIDIOC_LOG_STATUS ioctl. Signed-off-by:
-
Sylwester Nawrocki authored
Enable only MIPI CSI-2 data lanes at the DPHY that are actively used, rather than unmasking all unconditionally. Signed-off-by:
-
Sylwester Nawrocki authored
The MIPI CSIS device supports MIPI CSI-2 RAW8, RAW10, RAW12 data types. Add related media bus pixel format definitions. This doesn't cover all possible supported media bus pixel formats. Signed-off-by:
-
Sylwester Nawrocki authored
Add variant data structures for Exynos4212 and Exynos4412 SoC. Add 'const' qualifier for the variant description structures. Also remove has_cam_if flags from FIMC3 on Exynos4210 SoC is it has no interconnections the camera ports. Signed-off-by:
-
Sylwester Nawrocki authored
The FIMC FIFO output is not supported in the driver due to some hardware issues thus we can remove some code as out_path is always FIMC_IO_DMA. Signed-off-by:
-
Sylwester Nawrocki authored
Use v4l2_info() to make it possible to identify which FIMC-LITE device instance the logs refer to. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds definition of media bus code for YUV pixel format transferred in 30-bit samples where each component has 10 bits width. [mchehab@redhat.com: fix a merge conflict at v4l2-mediabus.h] Signed-off-by:
-
Sylwester Nawrocki authored
The counter field is unsigned so >= 0 condition always evaluates to true. Fix this to log events for which counter is > 0 or for all when in debug mode. Signed-off-by:
-
Sylwester Nawrocki authored
Setting FIMC_REG_CITRGFMT_FLIP_X_MIRROR bit causes X-axis image flip (vertical flip) and thus it corresponds to V4L2_CID_VFLIP. Likewise, setting FIMC_REG_CITRGFMT_FLIP_Y_MIRROR bit causes Y-axis image flip (horizontal flip) and thus it corresponds to V4L2_CID_HFLIP. Currently the driver does X-axis flip when V4L2_CID_HFLIP is set and Y-axis flip for V4L2_CID_VFLIP. Fix this incorrect assignment by setting proper FIMC_REG_CITRGFMT register bits for ctx->hflip and ctx->vflip. Reported-by:
-
Sakari Ailus authored
Correct a typo. v4l2_plane.m.userptr is unsigned long, not __unsigned long. Signed-off-by:
-
Sakari Ailus authored
Set buffer timestamp flags for videobuf, videobuf2 and drivers that use neither. Signed-off-by:
-
Sakari Ailus authored
Convert drivers using wall clock time (CLOCK_REALTIME) to timestamp from the monotonic timer (CLOCK_MONOTONIC). Signed-off-by:
-
Sakari Ailus authored
v4l2_get_timestamp() produces a monotonic timestamp but unlike ktime_get_ts(), it uses struct timeval instead of struct timespec, saving the drivers the conversion job when getting timestamps for v4l2_buffer's timestamp field. Signed-off-by:
-
Sakari Ailus authored
Define video buffer flags for different timestamp types. Everything up to now have used either realtime clock or monotonic clock, without a way to tell which clock the timestamp was taken from. Also document that the clock source of the timestamp in the timestamp field depends on buffer flags. [mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch is meant for 3.9] Signed-off-by:
-
Shaik Ameer Basha authored
G-Scaler src buffer count as well as destination buffer count is increased to 32. This is required for G-Scaler to interface with MFC, as MFC demands 32 capture buffers for some H264 streams. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
