- 01 Mar, 2021 1 commit
-
-
Joakim Zhang authored
Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although the reset value is 1b'1. This is a prepare patch, later patch will invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze mode acknowledge. Fixes: b1aa1c7a ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze") Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.comSigned-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 28 Feb, 2021 7 commits
-
-
Jakub Kicinski authored
Huazhong Tan says: ==================== net: hns3: fixes fot -net The patchset includes some fixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/1614410693-8107-1-git-send-email-tanhuazhong@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
The function hclge_fd_convert_tuple() is used to convert tuples and tuples mask to TCAM x and y. But it misuses the source mac as source mac mask when convert INNER_SRC_MAC, which may cause the flow director rule works unexpectedly. So fix it. Fixes: 11732868 ("net: hns3: Add input key and action config support for flow director") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Jian Shen authored
Currently, the driver returns VLAN_VID_MASK for vlan mask field, when get flow director rule information for rule doesn't use vlan. It may cause the vlan mask value display as 0xf000 in this case, like below: estuary:/$ ethtool -u eth1 50 RX rings available Total 1 rules Filter: 2 Rule Type: TCP over IPv4 Src IP addr: 0.0.0.0 mask: 255.255.255.255 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff VLAN EtherType: 0x0 mask: 0xffff VLAN: 0x0 mask: 0xf000 User-defined: 0x1234 mask: 0x0 Action: Direct to queue 3 Fix it by return 0. Fixes: 05c2314f ("net: hns3: Add support for rule query of flow director") Signed-off-by:
-
Jian Shen authored
Currently, some bit filed definitions of flow director TCAM configuration command are incorrect. Since the wrong MSB is always 0, and these fields are assgined in order, so it still works. Fix it by redefine them. Fixes: 11732868 ("net: hns3: Add input key and action config support for flow director") Signed-off-by:
-
Daniel Borkmann authored
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff4 ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f4 ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff4 ("udp: additional GRO support") Fixes: 662880f4 ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.netSigned-off-by:
-
Rafał Miłecki authored
When receiving a lot of packets hardware may run out of free descriptiors and stop RX ring. Enable it every time after handling received packets. Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.comSigned-off-by:
-
Yinjun Zhang authored
The command "ethtool -L <intf> combined 0" may clean the RX/TX channel count and skip the error path, since the attrs tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT] are NULL in this case when recent ethtool is used. Tested using ethtool v5.10. Fixes: 7be92514 ("ethtool: check if there is at least one channel for TX/RX in the core") Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20210225125102.23989-1-simon.horman@netronome.comSigned-off-by:
-
- 26 Feb, 2021 25 commits
-
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Error recovery bug fixes. Two error recovery related bug fixes for 2 corner cases. Please queue patch #2 for -stable. Thanks. ==================== Link: https://lore.kernel.org/r/1614332590-17865-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
Edwin Peer authored
The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a3 ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by:Scott Branden <scott.branden@broadcom.com> Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
The driver's error recovery reset sequence can take many seconds to complete and only the critical sections are protected by rtnl_lock. A recent change has introduced a regression in this sequence. bnxt_remove_one() may be called while the recovery is in progress. Normally, unregister_netdev() would cause bnxt_close_nic() to be called and this would cause the error recovery to safely abort with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic(). Recently, we added bnxt_reinit_after_abort() to allow the user to reopen the device after an aborted recovery. This causes the regression in the scenario described above because we would attempt to re-open even after the netdev has been unregistered. Fix it by checking the netdev reg_state in bnxt_reinit_after_abort() and abort if it is unregistered. Fixes: 6882c36c ("bnxt_en: attempt to reinitialize after aborted reset") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes a race condition in a selftest. The race and fix are explained in detail in the changelog. Patch #2 re-adds a link mode that was wrongly removed, resulting in a regression in some setups. Patch #3 fixes a race condition in route installation with nexthop objects. Please consider patches #2 and #3 for stable. ==================== Link: https://lore.kernel.org/r/20210225165721.1322424-1-idosch@idosch.orgSigned-off-by:
-
Ido Schimmel authored
Routes are currently processed from a workqueue whereas nexthop objects are processed in system call context. This can result in the driver not finding a suitable nexthop group for a route and issuing a warning [1]. Fix this by ignoring such routes earlier in the process. The subsequent deletion notification will be ignored as well. [1] WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] [...] CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16 Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018 Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] Fixes: cdd6cfc5 ("mlxsw: spectrum_router: Allow programming routes with nexthop objects") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reported-by:
Alex Veber <alexve@nvidia.com> Tested-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
Currently, only external bits are added to the PTYS register, whereas there is one external bit that is wrongly marked as internal, and so was recently removed from the register. Add that bit to the PTYS register again, as this bit is no longer internal. Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer being supported, causing a regression on some setups. Fixes: 5bf01b57 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register") Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reported-by:
Eddie Shklaer <eddies@nvidia.com> Tested-by:
-
Danielle Ratson authored
When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent, so that it is always valid. Fixes: b5b02939 ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test") Signed-off-by:
-
Arjun Roy authored
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a user-provided "len" field of type signed int, and then compare the value to the result of an "offsetofend" operation, which is unsigned. Negative values provided by the user will be promoted to large positive numbers; thus checking that len < offsetofend() will return false when the intention was that it return true. Note that while len is originally checked for negative values earlier on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the value from userspace which may have changed in the meantime. Therefore, re-add the check for negative values after the call to get_user in the handler code for TCP_ZEROCOPY_RECEIVE. Fixes: c8856c05 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Arjun Roy <arjunroy@google.com> Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.comSigned-off-by:
-
Heiko Thiery authored
When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'. Like described in the change in 91c0d987 the igp clock is disabled when the interface is down and leads to a system hang. So we check if the ptp clock status before reading the timecounter register. Signed-off-by:
Heiko Thiery <heiko.thiery@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.comSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_PM_SLEEP is disabled, the compiler warns about unused functions: drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function] static int mdio_bus_phy_suspend(struct device *dev) drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function] static int mdio_bus_phy_resume(struct device *dev) The logic is intentional, so just mark these two as __maybe_unused and remove the incorrect #ifdef. Fixes: 4c0d2e96 ("net: phy: consider that suspend2ram may cut off PHY power") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.orgSigned-off-by:
-
DENG Qingfang authored
The new GPIO support may be optional at runtime, but it requires building against gpiolib: ERROR: modpost: "gpiochip_get_data" [drivers/net/dsa/mt7530.ko] undefined! ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/net/dsa/mt7530.ko] undefined! Add #ifdef to exclude GPIO support if GPIOLIB is not enabled. Fixes: 429a0ede ("net: dsa: mt7530: MT7530 optional GPIO support") Reported-by:
DENG Qingfang <dqfext@gmail.com> Link: https://lore.kernel.org/r/20210226063226.8474-1-dqfext@gmail.comSigned-off-by:
-
Arnd Bergmann authored
When the ocelot driver code is in a library, the dsa tag code cannot be built-in: ld.lld: error: undefined symbol: ocelot_can_inject >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a ld.lld: error: undefined symbol: ocelot_port_inject_frame >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a Building the tag support only really makes sense for compile-testing when the driver is available, so add a Kconfig dependency that prevents the broken configuration while allowing COMPILE_TEST alternative when MSCC_OCELOT_SWITCH_LIB is disabled entirely. This case is handled through the #ifdef check in include/soc/mscc/ocelot.h. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210225143910.3964364-2-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Without this option, the driver fails to link: ld.lld: error: undefined symbol: devlink_sb_register >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a Fixes: f59fd9ca ("net: mscc: ocelot: configure watermarks using devlink-sb") Signed-off-by:
-
Jakub Kicinski authored
Joakim Zhang says: ==================== ethernet: fixes for stmmac driver Fixes for stmmac driver. --- ChangeLogs: V1->V2: * subject prefix: ethernet: stmmac: -> net: stmmac: * use dma_addr_t instead of unsigned int for physical address * use cpu_to_le32() V2->V3: * fix the build issue pointed out by kbuild bot. * add error handling for stmmac_reinit_rx_buffers() function. V3->V4: * remove patch (net: stmmac: remove redundant null check for ptp clock), reviewer thinks it should target net-next. V4->V5: * use %pad format to print dma_addr_t. * extend dwmac4_display_ring() to support all descriptor types. * while() -> do-while() ==================== Link: https://lore.kernel.org/r/20210225090114.17562-1-qiangqing.zhang@nxp.comSigned-off-by:
-
Joakim Zhang authored
During suspend/resume stress test, we found descriptor write back by DMA could exhibit unusual behavior, e.g.: 003 [0xc4310030]: 0x0 0x40 0x0 0xb5010040 We can see that desc3 write back is 0xb5010040, it is still ownd by DMA, so application would not recycle this buffer. It will trigger fatal bus error when DMA try to use this descriptor again. To fix this issue, we should re-init all rx buffers when mac resume back. Signed-off-by:
-
Joakim Zhang authored
In current driver, buffer2 available only when hardware supports split header. Wrongly set buffer2 valid in stmmac_rx_refill when refill buffer address. You can see that desc3 is 0x81000000 after initialization, but turn out to be 0x83000000 after refill. Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by:
-
Joakim Zhang authored
Driver uses dma_alloc_coherent to allocate dma memory for descriptors, dma_alloc_coherent will return both the virtual address and physical address. AFAIK, virt_to_phys could not convert virtual address to physical address, for which memory is allocated by dma_alloc_coherent. dwmac4_display_ring() function is broken for various descriptor, it only support normal descriptor(struct dma_desc) now, this patch also extends to support all descriptor types. Signed-off-by:
-
Joakim Zhang authored
stmmac_xmit() call stmmac_tx_timer_arm() at the end to modify tx timer to do the transmission cleanup work. Imagine such a situation, stmmac enters suspend immediately after tx timer modified, it's expire callback stmmac_tx_clean() would not be invoked. This could affect BQL, since netdev_tx_sent_queue() has been called, but netdev_tx_completed_queue() have not been involved, as a result, dql_avail(&dev_queue->dql) finally always return a negative value. __dev_queue_xmit->__dev_xmit_skb->qdisc_run->__qdisc_run->qdisc_restart->dequeue_skb: if ((q->flags & TCQ_F_ONETXQUEUE) && netif_xmit_frozen_or_stopped(txq)) // __QUEUE_STATE_STACK_XOFF is set Net core will stop transmitting any more. Finillay, net watchdong would timeout. To fix this issue, we should call netdev_tx_reset_queue() in stmmac_resume(). Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx") Signed-off-by:
-
Joakim Zhang authored
If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users may only want to stop specific tx channel. Fixes: 48863ce5 ("stmmac: add DMA support for GMAC 4.xx") Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 First set of fixes for v5.12. One iwlwifi kernel crash fix and smaller fixes to multiple drivers. ath9k * fix Spatial Multiplexing Power Save (SMPS) handling to improve thoughtput mt76 * error handling fixes * memory leax fixes iwlwifi * don't crash during debug collection on DVM devices MAINTAINERS * email address update ath11k * fix GCC warning about DMA address debug messages * fix regression which broke QCA6390 AP mode * tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: mt76: mt7915: fix unused 'mode' variable mt76: dma: do not report truncated frames to mac80211 mt76: mt7921: remove incorrect error handling iwlwifi: pcie: fix iwl_so_trans_cfg link error when CONFIG_IWLMVM is disabled ath11k: fix AP mode for QCA6390 ath11k: qmi: use %pad to format dma_addr_t MAINTAINERS: update for mwifiex driver maintainers iwlwifi: avoid crash on unsupported debug collection mt76: mt7915: only modify tx buffer list after allocating tx token id mt76: fix tx skb error handling in mt76_dma_tx_queue_skb ath9k: fix transmitting to stations in dynamic SMPS mode ==================== Link: https://lore.kernel.org/r/20210226164411.CDD03C433CA@smtp.codeaurora.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2021-02-26 1) Fix for bpf atomic insns with src_reg=r0, from Brendan. 2) Fix use after free due to bpf_prog_clone, from Cong. 3) Drop imprecise verifier log message, from Dmitrii. 4) Remove incorrect blank line in bpf helper description, from Hangbin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: No need to drop the packet when there is no geneve opt bpf: Remove blank line in bpf helper description comment tools/resolve_btfids: Fix build error with older host toolchains selftests/bpf: Fix a compiler warning in global func test bpf: Drop imprecise log message bpf: Clear percpu pointers in bpf_prog_clone_free() bpf: Fix a warning message in mark_ptr_not_null_reg() bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src ==================== Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.comSigned-off-by:
-
Arnd Bergmann authored
clang points out a possible corner case in the mt7915_tm_set_tx_cont() function if called with invalid arguments: drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here rateval = mode << 6 | rate_idx; ^~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning u8 rate_idx = td->tx_rate_idx, mode; ^ Change it to return an error instead of continuing with invalid data here. Fixes: 3f0caa3c ("mt76: mt7915: add support for continuous tx in testmode") Signed-off-by:Kalle Valo <kvalo@codeaurora.org>
-
Lorenzo Bianconi authored
Commit b102f0c5 ("mt76: fix array overflow on receiving too many fragments for a packet") fixes a possible OOB access but it introduces a memory leak since the pending frame is not released to page_frag_cache if the frag array of skb_shared_info is full. Commit 93a1d479 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes the issue but does not free the truncated skb that is forwarded to mac80211 layer. Fix the leftover issue discarding even truncated skbs. Fixes: 93a1d479 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
Clang points out a mistake in the error handling in mt7921_mcu_tx_rate_report(), which tries to dereference a pointer that cannot be initialized because of the error that is being handled: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:409:3: warning: variable 'stats' is uninitialized when used here [-Wuninitialized] stats->tx_rate = rate; ^~~~~ drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:401:32: note: initialize the variable 'stats' to silence this warning struct mt7921_sta_stats *stats; ^ Just remove the obviously incorrect line. Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Kalle Valo authored
Randy reported an error on his randconfig builds: ERROR: modpost: "iwl_so_trans_cfg" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined! The problem was that when CONFIG_IWLMVM was disabled we were still accessing iwl_so_trans_cfg. Fix it by moving IS_ENABLED() check before the access. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: 930be4e7 ("iwlwifi: add support for SnJ with Jf devices") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
- 25 Feb, 2021 7 commits
-
-
Linus Torvalds authored
Merge tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The ZTE ZX platform is being removed, so the PWM driver is no longer needed and removed as well. Other than that this contains a small set of fixes and cleanups across a couple of drivers" * tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: lpc18xx-sct: remove unneeded semicolon pwm: iqs620a: Correct a stale state variable pwm: iqs620a: Fix overflow and optimize calculations pwm: rockchip: Enable clock before calling clk_get_rate() pwm: rockchip: Eliminate potential race condition when probing pwm: rockchip: Replace "bus clk" with "PWM clk" pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare() pwm: rockchip: Enable APB clock during register access while probing pwm: Remove ZTE ZX driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: - new vdpa features to allow creation and deletion of new devices - virtio-blk support per-device queue depth - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits) virtio-input: add multi-touch support virtio_mmio: fix one typo vdpa/mlx5: fix param validation in mlx5_vdpa_get_config() virtio_net: Fix fall-through warnings for Clang virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT. virtio-blk: support per-device queue depth virtio_vdpa: don't warn when fail to disable vq virtio-pci: introduce modern device module virito-pci-modern: rename map_capability() to vp_modern_map_capability() virtio-pci-modern: introduce helper to get notification offset virtio-pci-modern: introduce helper for getting queue nums virtio-pci-modern: introduce helper for setting/geting queue size virtio-pci-modern: introduce helper to set/get queue_enable virtio-pci-modern: introduce vp_modern_queue_address() virtio-pci-modern: introduce vp_modern_set_queue_vector() virtio-pci-modern: introduce vp_modern_generation() virtio-pci-modern: introduce helpers for setting and getting features virtio-pci-modern: introduce helpers for setting and getting status virtio-pci-modern: introduce helper to set config vector virtio-pci-modern: introduce vp_modern_remove() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull more MIPS updates from Thomas Bogendoerfer: - added n64 block driver - fix for ubsan warnings - fix for bcm63xx platform - update of linux-mips mailinglist * tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: arch: mips: update references to current linux-mips list mips: bmips: init clocks earlier vmlinux.lds.h: catch even more instrumentation symbols into .data n64: store dev instance into disk private data n64: cleanup n64cart_probe() n64: cosmetics changes n64: remove curly brackets n64: use sector SECTOR_SHIFT instead 512 n64: use enums for reg n64: move module param at the top n64: move module info at the end n64: use pr_fmt to avoid duplicate string block: Add n64 cart driver
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm updates from Dave Airlie: "This is mostly fixes but I missed msm-next pull last week. It's been in drm-next. Otherwise it's a selection of i915, amdgpu and misc fixes, one TTM memory leak, nothing really major stands out otherwise. core: - vblank fence timing improvements dma-buf: - improve error handling ttm: - memory leak fix msm: - a6xx speedbin support - a508, a509, a512 support - various a5xx fixes - various dpu fixes - qseed3lite support for sm8250 - dsi fix for msm8994 - mdp5 fix for framerate bug with cmd mode panels - a6xx GMU OOB race fixes that were showing up in CI - various addition and removal of semicolons - gem submit fix for legacy userspace relocs path amdgpu: - clang warning fix - S0ix platform shutdown/poweroff fix - misc display fixes i915: - color format fix - -Wuninitialised reenabled - GVT ww locking, cmd parser fixes atyfb: - fix build rockchip: - AFBC modifier fix" * tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm: (60 commits) drm/panel: kd35t133: allow using non-continuous dsi clock drm/rockchip: Require the YTR modifier for AFBC drm/ttm: Fix a memory leak drm/drm_vblank: set the dma-fence timestamp during send_vblank_event dma-fence: allow signaling drivers to set fence timestamp dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf instead of fd dma-buf: system_heap: Make sure to return an error if we abort drm/amd/display: Fix system hang after multiple hotplugs (v3) drm/amdgpu: fix shutdown and poweroff process failed with s0ix drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALID drm/i915: Enable -Wuninitialized drm/amd/display: Remove Assert from dcn10_get_dig_frontend drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1 Revert "drm/amd/display: reuse current context instead of recreating one" drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics fbdev: atyfb: add stubs for aty_{ld,st}_lcd() drm/i915/gvt: Introduce per object locking in GVT scheduler. drm/i915/gvt: Purge dev_priv->gt drm/i915/gvt: Parse default state to update reg whitelist dt-bindings: dp-connector: Drop maxItems from -supply ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Rather small batch this time. Current release - regressions: - bcm63xx_enet: fix sporadic kernel panic due to queue length mis-accounting Current release - new code bugs: - bcm4908_enet: fix RX path possible mem leak - bcm4908_enet: fix NAPI poll returned value - stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe() - sched: cls_flower: validate ct_state for invalid and reply flags Previous releases - regressions: - net: introduce CAN specific pointer in the struct net_device to prevent mis-interpreting memory - phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 - psample: fix netlink skb length with tunnel info Previous releases - always broken: - icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending - wireguard: device: do not generate ICMP for non-IP packets - mptcp: provide subflow aware release function to avoid a mem leak - hsr: add support for EntryForgetTime - r8169: fix jumbo packet handling on RTL8168e - octeontx2-af: fix an off by one in rvu_dbg_qsize_write() - i40e: fix flow for IPv6 next header (extension header) - phy: icplus: call phy_restore_page() when phy_select_page() fails - dpaa_eth: fix the access method for the dpaa_napi_portal" * tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) r8169: fix jumbo packet handling on RTL8168e net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 net: psample: Fix netlink skb length with tunnel info net: broadcom: bcm4908_enet: fix NAPI poll returned value net: broadcom: bcm4908_enet: fix RX path possible mem leak net: hsr: add support for EntryForgetTime net: dsa: sja1105: Remove unneeded cast in sja1105_crc32() ibmvnic: fix a race between open and reset net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe() net: introduce CAN specific pointer in the struct net_device net: usb: qmi_wwan: support ZTE P685M modem wireguard: kconfig: use arm chacha even with no neon wireguard: queueing: get rid of per-peer ring buffers wireguard: device: do not generate ICMP for non-IP packets wireguard: peer: put frequently used members above cache lines wireguard: selftests: test multiple parallel streams wireguard: socket: remove bogus __be32 annotation wireguard: avoid double unlikely() notation when using IS_ERR() net: qrtr: Fix memory leak in qrtr_tun_open vxlan: move debug check after netdev unregister ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "These make additional changes to the platform profile interface merged recently and add support for the FPDT ACPI table. Specifics: - Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add "balanced-performance" to the list of supported platform profiles and fix up some file references in a comment (Maximilian Luz). - Add support for parsing the ACPI Firmware Performance Data Table (FPDT) and exposing the data from there via sysfs (Zhang Rui)" * tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: platform: Add balanced-performance platform profile ACPI: platform: Fix file references in comment ACPI: platform: Hide ACPI_PLATFORM_PROFILE option ACPI: tables: introduce support for FPDT table -
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2021-02-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next A fix for color format check from Ville, plus the re-enable of -Wuninitialized from Nathan, and the GVT fixes including fixes for ww locking, cmd parser and a general cleanup of dev_priv->gt. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YDe3pBPV5Kx3hpk6@intel.com
-
