Use the new display drivers for OMAP3 Overo board.

The new OMAP display drivers were merged for 3.11, and we can now change
the board files to use the new ones and phase out the old ones.

Note that the LCD add-on boards for lcd43 and lcd35 use the same GPIOs
for the panels. This means that both panel devices cannot be probed at
the same time.

DT will handle this correctly, i.e. the DT data will contain the panel
device only for the add-on board that is attached. However, for the
board file we need a hackish solution: We parse the kernel boot command
line, and see whether lcd43 or lcd35 is set as a default display, and
add the given one. Or, if neither is given, default to lcd43.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

4430SDP board has an option for a PicoDLP mini-projector. PicoDLP cannot
be used at the same time as the second LCD, and there are GPIOs that
need to be set/unset when changing the used display.

Managing that kind of board specific setup is not simple without board
file callbacks. As only some 4430SDP boards actually have the PicoDLP
installed, and 4430SDP boards are not that common in the first place,
let's remove PicoDLP data from the board file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

Use the new display drivers for OMAP4 Panda and OMAP4 SDP boards.

The new OMAP display drivers were merged for 3.11, and we can now change
the board files to use the new ones and phase out the old ones.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

Add some of the most common new display drivers to omap2plus_defconfig
to be built as modules.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

This is no longer needed as omap4 is now booted using device tree.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

Pull cgroup fix from Tejun Heo:
 "This contains one patch to fix the return value of cpuset's cgroups
  interface function, which used to always return -ENODEV for the writes
  on the 'memory_pressure_enabled' file"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix the return value of cpuset_write_u64()

Pull jbd2 bug fixes from Ted Ts'o:
 "Two jbd2 bug fixes, one of which is a regression fix"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: Fix oops in jbd2_journal_file_inode()
  jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()

Fix this build error:

  In file included from fs/exec.c:61:0:
  arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
  arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
  arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
  arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'

Broken due to commit 2b047252 ("Fix TLB gather virtual address range
invalidation corner cases").

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I have taken a different job.  I am removing myself as maintainer of
GRU.  Dimitri will continue to maintain the SGI GRU driver, changing the
XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my
personal email address to answer any questions about the design or
operation of the XP family of drivers.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0713ed0c added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.

We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Pull ARM fixes from Russell King:
 "The usual collection of random fixes.  Also some further fixes to the
  last set of security fixes, and some more from Will (which you may
  already have in a slightly different form)"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7807/1: kexec: validate CPU hotplug support
  ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
  ARM: 7811/1: locks: use early clobber in arch_spin_trylock
  ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
  ARM: 7809/1: perf: fix event validation for software group leaders
  ARM: Fix FIQ code on VIVT CPUs
  ARM: Fix !kuser helpers case
  ARM: Fix the world famous typo with is_gate_vma()

Pull m68k fixes from Geert Uytterhoeven:
 "These are two critical fixes, needed by distro kernels, and thus also
  destined for stable:

   - The do_div() commit fixes a crash in mounting btrfs volumes, which
     was a regression from 3.2,

   - The ARAnyM fix allows to have NatFeat drivers as loadable modules,
     which is needed for initrds"

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Truncate base in do_div()
  m68k/atari: ARAnyM - Fix NatFeat module support

Pull clock controller fixes from Michael Turquette:
 "Two small fixes for the Zynq clock controller introduced in 3.11-rc1
  and another Exynos clock patch which fixes a regression that prevents
  the video pipeline from functioning on that platform"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
  clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
  clk/zynq/clkc: Add dedicated spinlock for the SWDT

Pull power management fix from Rafael Wysocki:
 "The removal of delayed_work_pending() checks from kernel/power/qos.c
  done in 3.9 introduced a deadlock in pm_qos_work_fn().

  Fix from Stephen Boyd"

* tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()

Pull sound fixes from Takashi Iwai:
 "This batch contains a few USB audio fixes, a couple of HD-audio
  quirks, various small ASoC driver fixes in addition to an ASoC core
  fix that may lead to memory corruption.

  Unfortunately slightly more volume than the previous pull request, but
  all are reasonable regression fixes"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add a fixup for Gateway LT27
  ASoC: tegra: fix Tegra30 I2S capture parameter setup
  ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  ALSA: hda - Fix missing mute controls for CX5051
  ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
  ALSA: 6fire: make buffers DMA-able (midi)
  ALSA: 6fire: make buffers DMA-able (pcm)
  ALSA: hda - Add pinfix for LG LW25 laptop
  ASoC: cs42l52: Add new TLV for Beep Volume
  ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume
  ASoC: dapm: Fix empty list check in dapm_new_mux()
  ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control
  ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 3.11-rc6 that have accumulated.

  Nothing huge, a EHCI fix that solves a much-reported audio USB
  problem, some usb-serial driver endian fixes and other minor fixes, a
  wireless USB oops fix, and two new quirks"

* tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: keyspan: fix null-deref at disconnect and release
  USB: mos7720: fix broken control requests
  usb: add two quirky touchscreen
  USB: ti_usb_3410_5052: fix big-endian firmware handling
  USB: adutux: fix big-endian device-type reporting
  USB: usbtmc: fix big-endian probe of Rigol devices
  USB: mos7840: fix big-endian probe
  USB-Serial: Fix error handling of usb_wwan
  wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
  USB: EHCI: accept very late isochronous URBs

Pull networking fixes from David Miller:

 1) Fix SKB leak in 8139cp, from Dave Jones.

 2) Fix use of *_PAGES interfaces with mlx5 firmware, from Moshe Lazar.

 3) RCU conversion of macvtap introduced two races, fixes by Eric
    Dumazet

 4) Synchronize statistic flows in bnx2x driver to prevent corruption,
    from Dmitry Kravkov

 5) Undo optimization in IP tunneling, we were using the inner IP header
    in some cases to inherit the IP ID, but that isn't correct in some
    circumstances.  From Pravin B Shelar

 6) Use correct struct size when parsing netlink attributes in
    rtnl_bridge_getlink().  From Asbjoern Sloth Toennesen

 7) Length verifications in tun_get_user() are bogus, from Weiping Pan
    and Dan Carpenter

 8) Fix bad merge resolution during 3.11 networking development in
    openvswitch, albeit a harmless one which added some unreachable
    code.  From Jesse Gross

 9) Wrong size used in flexible array allocation in openvswitch, from
    Pravin B Shelar

10) Clear out firmware capability flags the be2net driver isn't ready to
    handle yet, from Sarveshwar Bandi

11) Revert DMA mapping error checking addition to cxgb3 driver, it's
    buggy.  From Alexey Kardashevskiy

12) Fix regression in packet scheduler rate limiting when working with a
    link layer of ATM.  From Jesper Dangaard Brouer

13) Fix several errors in TCP Cubic congestion control, in particular
    overflow errors in timestamp calculations.  From Eric Dumazet and
    Van Jacobson

14) In ipv6 routing lookups, we need to backtrack if subtree traversal
    don't result in a match.  From Hannes Frederic Sowa

15) ipgre_header() returns incorrect packet offset.  Fix from Timo Teräs

16) Get "low latency" out of the new MIB counter names.  From Eliezer
    Tamir

17) State check in ndo_dflt_fdb_del() is inverted, from Sridhar
    Samudrala

18) Handle TCP Fast Open properly in netfilter conntrack, from Yuchung
    Cheng

19) Wrong memcpy length in pcan_usb driver, from Stephane Grosjean

20) Fix dealock in TIPC, from Wang Weidong and Ding Tianhong

21) call_rcu() call to destroy SCTP transport is done too early and
    might result in an oops.  From Daniel Borkmann

22) Fix races in genetlink family dumps, from Johannes Berg

23) Flags passed into macvlan by the user need to be validated properly,
    from Michael S Tsirkin

24) Fix skge build on 32-bit, from Stephen Hemminger

25) Handle malformed TCP headers properly in xt_TCPMSS, from Pablo Neira
    Ayuso

26) Fix handling of stacked vlans in vlan_dev_real_dev(), from Nikolay
    Aleksandrov

27) Eliminate MTU calculation overflows in esp{4,6}, from Daniel
    Borkmann

28) neigh_parms need to be setup before calling the ->ndo_neigh_setup()
    method.  From Veaceslav Falico

29) Kill out-of-bounds prefetch in fib_trie, from Eric Dumazet

30) Don't dereference MLD query message if the length isn't value in the
    bridge multicast code, from Linus Lüssing

31) Fix VXLAN IGMP join regression due to an inverted check, from Cong
    Wang

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits)
  net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes
  tun: signedness bug in tun_get_user()
  qlcnic: Fix diagnostic interrupt test for 83xx adapters
  qlcnic: Fix beacon state return status handling
  qlcnic: Fix set driver version command
  net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset
  net_sched: restore "linklayer atm" handling
  drivers/net/ethernet/via/via-velocity.c: update napi implementation
  Revert "cxgb3: Check and handle the dma mapping errors"
  be2net: Clear any capability flags that driver is not interested in.
  openvswitch: Reset tunnel key between input and output.
  openvswitch: Use correct type while allocating flex array.
  openvswitch: Fix bad merge resolution.
  tun: compare with 0 instead of total_len
  rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header
  ethernet/arc/arc_emac - fix NAPI "work > weight" warning
  ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.
  bnx2x: prevent crash in shutdown flow with CNIC
  bnx2x: fix PTE write access error
  bnx2x: fix memory leak in VF
  ...

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc6 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c35 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a9 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.
Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Gateway LT27 needs a fixup for the inverted digital mic.
Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the previous QUERY_PAGES command version we used one command to get the
required amount of boot, init and post init pages.  The new version uses the
op_mod field to specify whether the query is for the required amount of boot,
init or post init pages. In addition the output field size for the required
amount of pages increased from 16 to 32 bits.

In MANAGE_PAGES command the input_num_entries and output_num_entries fields
sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10.

In the pages request event the num_pages field also changed to 32 bits.

In the HCA-capabilities-layout the size and location of max_qp_mcg field has
been changed to support 24 bits.

This patch isn't compatible with firmware versions < 5; however, it  turns out that the
first GA firmware we will publish will not support previous versions so this should be OK.
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent fix d9bf5f13 "tun: compare with 0 instead of total_len" is
not totally correct.  Because "len" and "sizeof()" are size_t type, that
means they are never less than zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Do not allow interrupt test when adapter is resetting.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Driver was misinterpreting the return status for beacon
  state query leading to incorrect interpretation of beacon
  state and logging an error message for successful status.
  Fixed the driver to properly interpret the return status.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver was issuing set driver version command through all
functions in the adapter. Fix the driver to issue set driver
version once per adapter, through function 0.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d8af4dfd ("net/tg3: Fix kernel crash") introduced a possible
NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev)
condition is met and netdev is NULL. Then, the jump to the 'done' label
calls dev_close() with a netdevice that is NULL. Therefore, only call
dev_close() when we have a netdevice, but one that is not running.

[ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin
Nayak Sujir ]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'asoc-v3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.11

A few driver specific fixes here plus one core fix for a memory
corruption issue in DAPM initialisation which could lead to crashes.

The Tegra30 I2S driver was writing the AHUB interface parameters to the
playback path register rather than the capture path register. This
caused the capture parameters not to be configured at all, so if
capturing using non-HW-default parameters (e.g. 16-bit stereo rather
than 8-bit mono) the audio would be corrupted.

With this fixed, audio capture from an analog microphone works correctly
on the Cardhu board.

Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

commit 56b765b7 ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.

 tc class add ... htb rate X ceil Y linklayer atm

The linklayer setting is implemented by modifying the rate table
which is send to the kernel.  No direct parameter were
transferred to the kernel indicating the linklayer setting.

The commit 56b765b7 ("htb: improved accuracy at high rates")
removed the use of the rate table system.

To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table.  It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.

Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect.  Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesse Gross says:

====================
Three bug fixes that are fairly small either way but resolve obviously
incorrect code. For net/3.11.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers supporting NAPI should use a NAPI-specific function for receiving
packets.  Hence netif_rx is changed to netif_receive_skb.

Furthermore netif_napi_del should be used in the probe and remove function
to clean up the NAPI resource information.

Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
this patch.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit f83331ba.

As the tests PPC64 (powernv platform) show, IOMMU pages are leaking
when transferring big amount of small packets (<=64 bytes),
"ping -f" and waiting for 15 seconds is the simplest way to confirm the bug.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Santosh Rastapur <santosh@chelsio.com>
Cc: Jay Fenlason <fenlason@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Divy Le ray <divy@chelsio.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible for some versions of firmware to advertise capabilities that driver
is not ready to handle. This may lead to controller stall. Since the driver is
interested only in subset of flags, clearing the rest.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It doesn't make sense to output a tunnel packet using the same
parameters that it was received with since that will generally
just result in the packet going back to us. As a result, userspace
assumes that the tunnel key is cleared when transitioning through
the switch. In the majority of cases this doesn't matter since a
packet is either going to a tunnel port (in which the key is
overwritten with new values) or to a non-tunnel port (in which
case the key is ignored). However, it's theoreticaly possible that
userspace could rely on the documented behavior, so this corrects
it.
Signed-off-by: Jesse Gross <jesse@nicira.com>

Flex array is used to allocate hash buckets which is type struct
hlist_head, but we use `struct hlist_head *` to calculate
array size.  Since hlist_head is of size pointer it works fine.

Following patch use correct type.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

git silently included an extra hunk in vport_cmd_set() during
automatic merging. This code is unreachable so it does not actually
introduce a problem but it is clearly incorrect.
Signed-off-by: Jesse Gross <jesse@nicira.com>