Skip to content

L
linux
Switch branch/tag
  1. 05 Dec, 2019 4 commits
  3. 16 Nov, 2019 1 commit
    • Olof Johansson's avatar
      Merge tag 'tee-fixes-for-v5.4' of... · db6efda8
      Olof Johansson authored 
      Merge tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Two OP-TE driver fixes:
- Add proper cleanup on optee_enumerate_devices() failure
- Make sure to register kernel allocations of dynamic shared memory

* tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee: (591 commits)
  tee: optee: fix device enumeration error handling
  tee: optee: Fix dynamic shm pool allocations
  Linux 5.4-rc3
  tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
  tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
  tracing/hwlat: Report total time spent in all NMIs during the sample
  recordmcount: Fix nop_mcount() function
  tracing: Do not create tracefs files if tracefs lockdown is in effect
  tracing: Add locked_down checks to the open calls of files created for tracefs
  tracing: Add tracing_check_open_get_tr()
  tracing: Have trace events system open call tracing_open_generic_tr()
  tracing: Get trace_array reference for available_tracers files
  ftrace: Get a reference counter for the trace_array on filter files
  tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down")
  perf/x86/cstate: Add Tiger Lake CPU support
  perf/x86/msr: Add Tiger Lake CPU support
  perf/x86/intel: Add Tiger Lake CPU support
  perf/x86/cstate: Update C-state counters for Ice Lake
  perf/x86/msr: Add new CPU model numbers for Ice Lake
  perf/x86/cstate: Add Comet Lake CPU support
  ...

Link: https://lore.kernel.org/r/20191115105353.GA26176@jaxSigned-off-by: default avatarOlof Johansson <olof@lixom.net>
      db6efda8
  5. 15 Nov, 2019 2 commits
    • Jens Wiklander's avatar
      tee: optee: fix device enumeration error handling · 03212e34
      Jens Wiklander authored 
      Prior to this patch in optee_probe() when optee_enumerate_devices() was
called the struct optee was fully initialized. If
optee_enumerate_devices() returns an error optee_probe() is supposed to
clean up and free the struct optee completely, but will at this late
stage need to call optee_remove() instead. This isn't done and thus
freeing the struct optee prematurely.

With this patch the call to optee_enumerate_devices() is done after
optee_probe() has returned successfully and in case
optee_enumerate_devices() fails everything is cleaned up with a call to
optee_remove().

Fixes: c3fa24af ("tee: optee: add TEE bus device enumeration support")
Reviewed-by: default avatarSumit Garg <sumit.garg@linaro.org>
Signed-off-by: default avatarJens Wiklander <jens.wiklander@linaro.org>
      03212e34
    • Sumit Garg's avatar
      tee: optee: Fix dynamic shm pool allocations · a249dd20
      Sumit Garg authored 
      In case of dynamic shared memory pool, kernel memory allocated using
dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage
during optee_open_session() or optee_invoke_func().

So fix dmabuf_mgr pool allocations via an additional call to
optee_shm_register().

Also, allow kernel pages to be registered as shared memory with OP-TEE.

Fixes: 9733b072 ("optee: allow to work without static shared memory")
Signed-off-by: default avatarSumit Garg <sumit.garg@linaro.org>
Signed-off-by: default avatarJens Wiklander <jens.wiklander@linaro.org>
      a249dd20
  7. 06 Nov, 2019 6 commits
  9. 04 Nov, 2019 2 commits
  11. 02 Nov, 2019 2 commits
  13. 29 Oct, 2019 2 commits
  15. 28 Oct, 2019 5 commits
  17. 26 Oct, 2019 2 commits
    • Ben Dooks's avatar
      soc: imx: gpc: fix initialiser format · 96ed1044
      Ben Dooks authored 
      Make the initialiers in imx_gpc_domains C99 format to fix the
following sparse warnings:

drivers/soc/imx/gpc.c:252:30: warning: obsolete array initializer, use C99 syntax
drivers/soc/imx/gpc.c:258:29: warning: obsolete array initializer, use C99 syntax
drivers/soc/imx/gpc.c:269:34: warning: obsolete array initializer, use C99 syntax
drivers/soc/imx/gpc.c:278:30: warning: obsolete array initializer, use C99 syntax
Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: default avatarLucas Stach <l.stach@pengutronix.de>
Fixes: b0682d48 ("soc: imx: gpc: use GPC_PGC_DOMAIN_* indexes")
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      96ed1044
    • Fabio Estevam's avatar
      ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts · 7e5d0bf6
      Fabio Estevam authored 
      Since commit a211b8c5 ("ARM: dts: imx6qdl-sabreauto: Add sensors")
a storm of accelerometer interrupts is seen:

[  114.211283] irq 260: nobody cared (try booting with the "irqpoll" option)
[  114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1
[  114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[  114.230531] [<c0112858>] (unwind_backtrace) from [<c010cdc8>] (show_stack+0x10/0x14)
[  114.238301] [<c010cdc8>] (show_stack) from [<c0c1aa1c>] (dump_stack+0xd8/0x110)
[  114.245644] [<c0c1aa1c>] (dump_stack) from [<c0193594>] (__report_bad_irq+0x30/0xc0)
[  114.253417] [<c0193594>] (__report_bad_irq) from [<c01933ac>] (note_interrupt+0x108/0x298)
[  114.261707] [<c01933ac>] (note_interrupt) from [<c018ffe4>] (handle_irq_event_percpu+0x70/0x80)
[  114.270433] [<c018ffe4>] (handle_irq_event_percpu) from [<c019002c>] (handle_irq_event+0x38/0x5c)
[  114.279326] [<c019002c>] (handle_irq_event) from [<c019438c>] (handle_level_irq+0xc8/0x154)
[  114.287701] [<c019438c>] (handle_level_irq) from [<c018eda0>] (generic_handle_irq+0x20/0x34)
[  114.296166] [<c018eda0>] (generic_handle_irq) from [<c0534214>] (mxc_gpio_irq_handler+0x30/0xf0)
[  114.304975] [<c0534214>] (mxc_gpio_irq_handler) from [<c0534334>] (mx3_gpio_irq_handler+0x60/0xb0)
[  114.313955] [<c0534334>] (mx3_gpio_irq_handler) from [<c018eda0>] (generic_handle_irq+0x20/0x34)
[  114.322762] [<c018eda0>] (generic_handle_irq) from [<c018f3ac>] (__handle_domain_irq+0x64/0xe0)
[  114.331485] [<c018f3ac>] (__handle_domain_irq) from [<c05215a8>] (gic_handle_irq+0x4c/0xa8)
[  114.339862] [<c05215a8>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0x98)
[  114.347361] Exception stack(0xc1301ec0 to 0xc1301f08)
[  114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8
[  114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4
[  114.368830] 1f00: 20000013 ffffffff
[  114.372349] [<c0101a70>] (__irq_svc) from [<c0878de4>] (cpuidle_enter_state+0x168/0x5f4)
[  114.380464] [<c0878de4>] (cpuidle_enter_state) from [<c08792ac>] (cpuidle_enter+0x28/0x38)
[  114.388751] [<c08792ac>] (cpuidle_enter) from [<c015ef9c>] (do_idle+0x224/0x2a8)
[  114.396168] [<c015ef9c>] (do_idle) from [<c015f3b8>] (cpu_startup_entry+0x18/0x20)
[  114.403765] [<c015f3b8>] (cpu_startup_entry) from [<c1200e54>] (start_kernel+0x43c/0x500)
[  114.411958] handlers:
[  114.414302] [<a01028b8>] irq_default_primary_handler threaded [<fd7a3b08>] mma8452_interrupt
[  114.422974] Disabling IRQ #260

           CPU0       CPU1
....
260:     100001          0  gpio-mxc  31 Level     mma8451

The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin
needs to activate its pull up, otherwise it will stay always at low level
generating multiple interrupts.

The current device tree does not configure the IOMUX for this pin, so
it uses whathever comes configured from the bootloader.

The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from
the bootloader, which has PKE bit cleared, hence disabling the
pull-up.

Instead of relying on a previous configuration from the bootloader,
configure the GPIO6_IO31 pin with pull-up enabled in order to fix
this problem.

Fixes: a211b8c5 ("ARM: dts: imx6qdl-sabreauto: Add sensors")
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Reviewed-By: default avatarLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      7e5d0bf6
  19. 25 Oct, 2019 2 commits
  21. 24 Oct, 2019 6 commits
  23. 23 Oct, 2019 3 commits
  25. 22 Oct, 2019 1 commit
    • Kishon Vijay Abraham I's avatar
      reset: Fix memory leak in reset_control_array_put() · 532f9cd6
      Kishon Vijay Abraham I authored 
      Memory allocated for 'struct reset_control_array' in
of_reset_control_array_get() is never freed in
reset_control_array_put() resulting in kmemleak showing
the following backtrace.

  backtrace:
    [<00000000c5f17595>] __kmalloc+0x1b0/0x2b0
    [<00000000bd499e13>] of_reset_control_array_get+0xa4/0x180
    [<000000004cc02754>] 0xffff800008c669e4
    [<0000000050a83b24>] platform_drv_probe+0x50/0xa0
    [<00000000d3a0b0bc>] really_probe+0x108/0x348
    [<000000005aa458ac>] driver_probe_device+0x58/0x100
    [<000000008853626c>] device_driver_attach+0x6c/0x90
    [<0000000085308d19>] __driver_attach+0x84/0xc8
    [<00000000080d35f2>] bus_for_each_dev+0x74/0xc8
    [<00000000dd7f015b>] driver_attach+0x20/0x28
    [<00000000923ba6e6>] bus_add_driver+0x148/0x1f0
    [<0000000061473b66>] driver_register+0x60/0x110
    [<00000000c5bec167>] __platform_driver_register+0x40/0x48
    [<000000007c764b4f>] 0xffff800008c6c020
    [<0000000047ec2e8c>] do_one_initcall+0x5c/0x1b0
    [<0000000093d4b50d>] do_init_module+0x54/0x1d0

Fixes: 17c82e20 ("reset: Add APIs to manage array of resets")
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
      532f9cd6
  27. 21 Oct, 2019 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7