- 15 Oct, 2021 13 commits
-
-
Srujana Challa authored
This patch enables and registers interrupt handler for CPT HW interrupts. Signed-off-by:
Srujana Challa <schalla@marvell.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Randy Dunlap authored
On i386, when builtin (not a loadable module), the winbond-840 driver inspects boot_cpu_data to see what CPU family it is running on, and then acts on that data. The "family" struct member (x86) does not exist when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’: ../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’ if (boot_cpu_data.x86 <= 4) { Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: linux-um@lists.infradead.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
On a UML build, the igc_ptp driver uses CONFIG_X86_TSC for timestamp conversion. The function that is used is not available on UML builds, so have the function use the default system_counterval_t timestamp instead for UML builds. Prevents this build error on UML: ../drivers/net/ethernet/intel/igc/igc_ptp.c: In function ‘igc_device_tstamp_to_system’: ../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: implicit declaration of function ‘convert_art_ns_to_tsc’ [-Werror=implicit-function-declaration] return convert_art_ns_to_tsc(tstamp); ../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: incompatible types when returning type ‘int’ but ‘struct system_counterval_t’ was expected return convert_art_ns_to_tsc(tstamp); Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
-
Randy Dunlap authored
On i386, when builtin (not a loadable module), the fealnx driver inspects boot_cpu_data to see what CPU family it is running on, and then acts on that data. The "family" struct member (x86) does not exist when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/ethernet/fealnx.c: In function ‘netdev_open’: ../drivers/net/ethernet/fealnx.c:861:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’ Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
-
Jiasheng Jiang authored
Adding comment to avoid the misusing of netvsc_xdp_xmit(). Otherwise the value of skb->queue_mapping could be 0 and then the return value of skb_get_rx_queue() could be MAX_U16 cause by overflow. Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1634174786-1810351-1-git-send-email-jiasheng@iscas.ac.cnSigned-off-by:
-
Jakub Kicinski authored
Daniel Borkmann says: ==================== Minor managed neighbor follow-ups Minor follow-up series to address prior feedback from David and Jakub. Patch 1 adds a build time assertion to prevent overflows when shifting in extended flags, patch 2 is a cleanup to use NLA_POLICY_MASK instead of open-coding invalid flags rejection and patch 3 rejects creating new neighbors with NUD_PERMANENT & NTF_MANAGED. For details, see individual patches. ==================== Link: https://lore.kernel.org/r/20211013132140.11143-1-daniel@iogearbox.netSigned-off-by:
-
Daniel Borkmann authored
The combination of NUD_PERMANENT + NTF_MANAGED is not supported and does not make sense either given the former indicates a static/fixed neighbor entry whereas the latter a dynamically resolved one. While it is possible to transition from one over to the other, we should however reject such creation attempts. Fixes: 7482e384 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries") Suggested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
-
Daniel Borkmann authored
Instead of open-coding a check for invalid bits in NTF_EXT_MASK, we can just use the NLA_POLICY_MASK() helper instead, and simplify NDA_FLAGS_EXT sanity check this way. Suggested-by:
-
Daniel Borkmann authored
Currently, NDA_FLAGS_EXT flags allow a maximum of 24 bits to be used for extended neighbor flags. These are eventually fed into neigh->flags by shifting with NTF_EXT_SHIFT as per commit 2c611ad9 ("net, neigh: Extend neigh->flags to 32 bit to allow for extensions"). If really ever needed in future, the full 32 bits from NDA_FLAGS_EXT can be used, it would only require to move neigh->flags from u32 to u64 inside the kernel. Add a build-time assertion such that when extending the NTF_EXT_MASK with new bits, we'll trigger an error once we surpass the 24th bit. This assumes that no bit holes in new NTF_EXT_* flags will slip in from UAPI, but I think this is reasonable to assume. Suggested-by:
-
Yuval Shaia authored
The variable pp is not in use - delete it. Signed-off-by:
Yuval Shaia <yshaia@marvell.com> Link: https://lore.kernel.org/r/20211013064921.26346-1-yshaia@marvell.comSigned-off-by:
-
Lay, Kuan Loon authored
PHY driver dp83867 has rich supports for OF-platform to fine-tune the PHY chip during phy configuration. However, for non-OF platform, certain PHY tunable parameters such as IO impedance and RX & TX internal delays are critical and should be initialized to its default during PHY driver probe. Tested-by:
Clement <clement@intel.com> Signed-off-by:
Lay, Kuan Loon <kuan.loon.lay@intel.com> Co-developed-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20211013065941.2124858-1-boon.leong.ong@intel.comSigned-off-by:
-
Yuiko Oshino authored
If the PTP_PEROUT_DUTY_CYCLE flag is set, then check if the request_on value in ptp_perout_request matches the pre-defined values or a toggle option. Return a failure if the value is not supported. Preserve the old behaviors if the PTP_PEROUT_DUTY_CYCLE flag is not set. Tested with an oscilloscope on EVB-LAN7430: e.g., to output PPS 1sec period 500mS on (high) to GPIO 2. ./testptp -L 2,2 ./testptp -p 1000000000 -w 500000000 Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Link: https://lore.kernel.org/r/1634046593-64312-1-git-send-email-yuiko.oshino@microchip.comSigned-off-by:
-
Matthias Schiffer authored
It seems reasonable to fine-tune only some of the skew values when using one of the rgmii-*id PHY modes, and even when all skew values are specified, using the correct ID PHY mode makes sense for documentation purposes. Such a configuration also appears in the binding docs in Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver should not warn about it. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@ew.tq-group.comSigned-off-by:
-
- 14 Oct, 2021 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
tools/testing/selftests/net/ioam6.sh 7b1700e0 ("selftests: net: modify IOAM tests for undef bits") bf77b140 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by:
-
Arnd Bergmann authored
Moving the of_net code from drivers/of/ to net/core means we no longer stub out the helpers when networking is disabled, which leads to a randconfig build failure with at least one ARM platform that calls this from non-networking code: arm-linux-gnueabi-ld: arch/arm/mach-mvebu/kirkwood.o: in function `kirkwood_dt_eth_fixup': kirkwood.c:(.init.text+0x54): undefined reference to `of_get_mac_address' Restore the way this worked before by changing that #ifdef check back to testing for both CONFIG_OF and CONFIG_NET. Fixes: e330fb14 ("of: net: move of_net under net/") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211014090055.2058949-1-arnd@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ... -
Jakub Kicinski authored
random_ether_addr() was the original name of the helper which was kept for backward compatibility (?) after the rename in commit 0a4dd594 ("etherdevice: Rename random_ether_addr to eth_random_addr"). We have a single random_ether_addr() caller left in tree while there are 70 callers of eth_random_addr(). Time to drop this define. Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20211013205450.328092-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== ethernet: more netdev->dev_addr write removals Another series removing direct writes to netdev->dev_addr. ==================== Link: https://lore.kernel.org/r/20211013204435.322561-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. This patch takes care of drivers which cast netdev->dev_addr to a 16bit type, often with an explicit byte order. Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
A handful of drivers contains loops assigning the mac addr byte by byte. Convert those to eth_hw_addr_set(). Signed-off-by: -
Jakub Kicinski authored
A straggler I somehow missed in the automated conversion in commit 9ca01b25 ("ethernet: use of_get_ethdev_address()"). Use the new helper instead of using netdev->dev_addr directly. Signed-off-by:
-
Jakub Kicinski authored
A handful of drivers use sizeof(addr) for the size of the address, after manually confirming the size is indeed 6 convert them to eth_hw_addr_set(). Acked-by:
Petko Manolov <petkan@nucleusys.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Jakub Kicinski authored
Number of drivers use eth_random_addr(netdev->dev_addr) thus writing to netdev->dev_addr directly, and not setting the address type. Switch them to eth_hw_addr_random(). @@ expression netdev; @@ - eth_random_addr(netdev->dev_addr); + eth_hw_addr_random(netdev); Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by:
-
Jakub Kicinski authored
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Maciej Machnikowski says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-14 Extend the driver implementation to support PTP pins on E810-T and derivative devices. E810-T adapters are equipped with: - 2 external bidirectional SMA connectors - 1 internal TX U.FL shared with SMA1 - 1 internal RX U.FL shared with SMA2 The SMA and U.FL configuration is controlled by the external multiplexer. E810-T Derivatives are equipped with: - 2 1PPS outputs on SDP20 and SDP22 - 2 1PPS inputs on SDP21 and SDP23 ==================== Link: https://lore.kernel.org/r/20211014153531.2908804-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Xin Long authored
In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done step by step and skb_header_pointer() return value should always be checked, this patch fixes 3 places in there: - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name from skb by skb_header_pointer(), its len is ident_len. Besides, the return value of skb_header_pointer() should always be checked. - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of skb_header_pointer(), and also do the return value check for skb_header_pointer(). - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr. ctype3_hdr.addrlen, skb_header_pointer() should be called first, then check its return value and ident_len. On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident. addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value. On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr)" or "ident_len". v1->v2: - To make it more clear, call skb_header_pointer() once only for iio->indent's parsing as Jakub Suggested. v2->v3: - The extobj_hdr.length check against sizeof(_iio) should be done before calling skb_header_pointer(), as Eric noticed. Fixes: d329ea5b ("icmp: add response to RFC 8335 PROBE messages") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.comSigned-off-by:
-
Maciej Machnikowski authored
Expose SMA and U.FL connectors as ptp_pins on E810-T based adapters and allow controlling them. E810-T adapters are equipped with: - 2 external bidirectional SMA connectors - 1 internal TX U.FL - 1 internal RX U.FL U.FL connectors share signal lines with the SMA connectors. The TX U.FL1 share the line with the SMA1 and the RX U.FL2 share line with the SMA2. This dependence is controlled by the ice_verify_pin_e810t. Additionally add support for the E810-T-based devices which don't use the SMA/U.FL controller. If the IO expander is not detected don't expose pins and use 2 predefined 1PPS input and output pins. Signed-off-by:
Maciej Machnikowski <maciej.machnikowski@intel.com> Tested-by:
Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Maciej Machnikowski authored
E810-T adapters have two external bidirectional SMA connectors and two internal unidirectional U.FL connectors. Multiplexing between U.FL and SMA and SMA direction is controlled using the PCA9575 expander. Add support for the PCA9575 detection and control of the respective pins of the SMA/U.FL multiplexer using the GPIO AQ API. Signed-off-by:
-
Maciej Machnikowski authored
Implement ice_aq_get_gpio and ice_aq_set_gpio for reading and changing the state of GPIO pins described in the topology. Signed-off-by:
-
Maciej Machnikowski authored
Separate link topo parameters in struct ice_aqc_link_topo_addr into new struct ice_aqc_link_topo_params. This keeps input parameters for the get_link_topo command in a separate structure and is required by future commands that operate only on link topo params without the node handle. Signed-off-by:
-
Cai Huoqing authored
Change the devicetree documentation path to "Documentation/devicetree/bindings/net/fsl,fec.yaml" since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.comSigned-off-by:
-
Eiichi Tsukata authored
sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Reviewed-by:
-
Ido Schimmel authored
Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35 ("mlxsw: core: Implement thermal zone") Fixes: a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.orgSigned-off-by:
-
Arnd Bergmann authored
After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd37688 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: -
Dinh Nguyen authored
Richard Gong is no longer at Intel, so update the MAINTAINER's entry for the Stratix10 firmware drivers. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains quite a few device-specific fixes for usual HD- and USB-audio in addition to a couple of ALSA core fixes (a UAF fix in sequencer and a fix for a misplaced PCM 32bit compat ioctl). Nothing really stands out" * tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for VF0770 ALSA: hda: avoid write to STATESTS if controller is in reset ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 ALSA: hda: intel: Allow repeatedly probing on codec configuration errors ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 ALSA: hda/realtek - ALC236 headset MIC recording issue ALSA: usb-audio: Enable rate validation for Scarlett devices ALSA: hda/realtek: Add quirk for Clevo X170KM-G ALSA: hda/realtek: Complete partial device name to avoid ambiguity ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 ALSA: seq: Fix a potential UAF by wrong private_free call order ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer
-
Chen Wandun authored
The implement of function netdev_all_upper_get_next_dev_rcu has been removed in: commit f1170fd4 ("net: Remove all_adj_list and its references") so delete redundant declaration in header file. Fixes: f1170fd4 ("net: Remove all_adj_list and its references") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Link: https://lore.kernel.org/r/20211013094702.3931071-1-chenwandun@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Show per-band ECN-marked counter on qdisc The RED qdisc can expose number of packets that it has marked through the prob_marked counter (shown in iproute2 as "marked"). This counter currently just shows number of packets marked in the SW datapath, which in a switch deployment likely means zero. Spectrum-3 does support per-TC counters, and in this patchset, mlxsw supports this RED statistic properly. ==================== Link: https://lore.kernel.org/r/20211013103748.492531-1-idosch@idosch.orgSigned-off-by:
-
Petr Machata authored
Add a variant of ECN test that uses qdisc marked counter (supported on Spectrum-3 and above) instead of the aggregate ethtool ecn_marked counter. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
