- 15 Aug, 2018 6 commits
-
-
Stephen Boyd authored
Merge branches 'clk-qcom-rpmh', 'clk-qcom-spdx', 'clk-con-id-leak', 'clk-fixed-factor-populated' and 'clk-mvebu-periph-parent' into clk-next * clk-qcom-rpmh: : - Qualcomm RPMh clk driver clk: qcom: clk-rpmh: Add QCOM RPMh clock driver * clk-qcom-spdx: : - SPDX tagging for qcom clk: qcom: Update SPDX headers for common files * clk-con-id-leak: : - Stop leaking con ids in __clk_put() clk: core: Potentially free connection id * clk-fixed-factor-populated: : - Fix a corner case in fixed factor clk probing where node is in DT but : parent clk is registered much later clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure * clk-mvebu-periph-parent: : - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
-
Stephen Boyd authored
Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30
-
Stephen Boyd authored
Merge branches 'clk-imx-critical', 'clk-tegra-bpmp', 'clk-tegra-124', 'clk-tegra-critical' and 'clk-tegra-emc-oob' into clk-next * clk-imx-critical: : - Convert to CLK_IS_CRITICAL for i.MX51/53 driver clk: imx51-imx53: Include sizes.h to silence compile errors clk: imx51-imx53: Annotate critical clocks as CLK_IS_CRITICAL * clk-tegra-bpmp: : - Fix Tegra BPMP driver oops when some xlating a NULL clk clk: tegra: bpmp: Don't crash when a clock fails to register * clk-tegra-124: : - Proper default configuration for vic03 and vde clks on Tegra124 clk: tegra: Make vde a child of pll_c3 clk: tegra: Make vic03 a child of pll_c3 * clk-tegra-critical: : - Mark Tegra memory controller clks as critical clk: tegra: Mark Memory Controller clock as critical * clk-tegra-emc-oob: : - Fix array bounds clamp in Tegra's emc determine_rate() op clk: tegra: emc: Avoid out-of-bounds bug
-
Stephen Boyd authored
Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', 'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next * clk-ingenic-fixes: : - Ingenic i2s bit update and allow UDC clk to gate clk: ingenic: Add missing flag for UDC clock clk: ingenic: Fix incorrect data for the i2s clock * clk-max9485: : - Maxim 9485 Programmable Clock Generator clk: Add driver for MAX9485 dts: clk: add devicetree bindings for MAX9485 * clk-pxa-32k-pll: : - Expose 32 kHz PLL on PXA SoCs clk: pxa: export 32kHz PLL * clk-aspeed: : - Fix name of aspeed SDC clk define to have only one 'CLK' clk: aspeed: Fix SDCLK name * clk-imx6sll-gpio: : - imx6sll GPIO clk gate support clk: imx6sll: add GPIO LPCGs
-
Stephen Boyd authored
Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next * clk-imx6-video-parent: : - Fix i.MX6QDL video clk parent clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL * clk-qcom-sdm845-criticals: : - critical clk markings for qcom SDM845 clk: qcom: Enable clocks which needs to be always on for SDM845 * clk-renesas: clk: renesas: Renesas R9A06G032 clock driver dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation dt-bindings: clock: Add the r9a06g032-sysctrl.h file clk: renesas: r8a7795: Add CCREE clock clk: renesas: r8a7795: Add CR clock * clk-stratix10-fixes: : - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents clk: socfpga: stratix10: fix the sdmmc_free_clk mux clk: socfpga: stratix10: fix the parents of mpu_free_clk * clk-atmel-i2s: : - Atmel at91 I2S audio clk support clk: at91: add I2S clock mux driver dt-bindings: clk: at91: add an I2S mux clock
-
Stephen Boyd authored
Merge branches 'clk-qcom-set-rate-gate', 'clk-core-set-rate-gate', 'clk-core-duty-cycle', 'clk-si-prepare' and 'clk-imx-gpio-gates' into clk-next * clk-qcom-set-rate-gate: clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks * clk-core-set-rate-gate: clk: fix CLK_SET_RATE_GATE with clock rate protection * clk-core-duty-cycle: clk: add duty cycle support * clk-si-prepare: : - SI544/SI514 clk on/off support clk-si514, clk-si544: Implement prepare/unprepare/is_prepared operations * clk-imx-gpio-gates: : - i.MX6UL GPIO clock gates in CCM CCGR clk: imx6ul: remove clks_init_on array clk: imx6ul: add GPIO clock gates dt-bindings: clock: imx6ul: Do not change the clock definition order
-
- 08 Aug, 2018 1 commit
-
-
Stephen Boyd authored
Merge tag 'v4.19-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull one final rockchip update from Heiko Stuebner: pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core. * tag 'v4.19-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
-
- 06 Aug, 2018 1 commit
-
-
Levin Du authored
PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave from power on and the VDD_LOG is about 0.9V. When the kernel boots normally into the system, the PWM2 keeps outputing PWM signal. But the kernel hangs randomly after "Starting kernel ..." line on that board. When it happens, PWM2 outputs high level which causes VDD_LOG drops to 0.4V below the normal operating voltage. By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array, PWM clock is ensured to be prepared at startup and the PWM2 output is normal. After repeated tests, the early boot hang is gone. This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards. Signed-off-by:
Levin Du <djw@t-chip.com.cn> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
- 27 Jul, 2018 1 commit
-
-
Anders Roxell authored
When building armada-37xx-periph, num_parents isn't used in function clk_pm_cpu_get_parent: drivers/clk/mvebu/armada-37xx-periph.c: In function ‘clk_pm_cpu_get_parent’: drivers/clk/mvebu/armada-37xx-periph.c:419:6: warning: unused variable ‘num_parents’ [-Wunused-variable] int num_parents = clk_hw_get_num_parents(hw); ^~~~~~~~~~~ Remove the declaration of num_parents to dispose the warning. Fixes: 616bf80d ("clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent") Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
- 25 Jul, 2018 4 commits
-
-
Gregory CLEMENT authored
The return value of the get_parent operation is a u8, whereas a -EINVAL was returned. This wrong value was return if the value was bigger that the number of parent but this case was already handled by the core. So we can just remove this chunk of code to fix the issue. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9818a7a4 ("clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS") Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Rajan Vaja authored
Fixed factor clock has two initializations at of_clk_init() time and during platform driver probe. Before of_clk_init() call, node is marked as populated and so its probe never gets called. During of_clk_init() fixed factor clock registration may fail if any of its parent clock is not registered. In this case, it doesn't get chance to retry registration from probe. Clear OF_POPULATED flag if fixed factor clock registration fails so that clock registration is attempted again from probe. Signed-off-by:
Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by:
-
Mikko Perttunen authored
Patch "clk: core: Copy connection id" made it so that the connector id 'con_id' is kstrdup_const()ed to cater to drivers that pass non-constant connection ids. The patch added the corresponding kfree_const to __clk_free_clk(), but struct clk's can be freed also via __clk_put(). Add the kfree_const call to __clk_put() and add comments to both functions to remind that the logic in them should be kept in sync. Fixes: 253160a8 ("clk: core: Copy connection id") Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
-
Taniya Das authored
SPDX headers updated for common/branch/pll/regmap files. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Signed-off-by:
-
- 16 Jul, 2018 1 commit
-
-
Taniya Das authored
Add the RPMh clock driver to control the RPMh managed clock resources on some of the Qualcomm Technologies, Inc. SoCs. Signed-off-by:
-
- 11 Jul, 2018 1 commit
-
-
Stephen Boyd authored
Merge tag 'v4.19-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull Rockchip clk driver updates from Heiko Stuebner: Support for Rockchip's PX30 SoC including its new half-divider clock type that is doing freq_out = 2*freq_in / (2*div + 3). As well as a register-bit fix for the rk3399 i2sout clock. * tag 'v4.19-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30
-
- 09 Jul, 2018 21 commits
-
-
Oleksij Rempel authored
This clock is needed for iMX mailbox driver Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull first round of updates for meson clocks from Jerome Brunet: - Remove legacy register access (finish moving to syscon) - Clean up configuration flags - Add axg PCIe clocks - Add GEN CLK on gxbb, gxl and axg - Remove clk_audio_divider driver - Add axg audio clock controller * tag 'meson-clk-4.19-1' of https://github.com/BayLibre/clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: add duty cycle support clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL
-
Gregory CLEMENT authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Jerome Brunet authored
GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by:Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
HHI_GEN_CLK_CTNL is defined twice, just remove the duplicate definition Fixes: 738f66d3 ("clk: gxbb: add AmLogic GXBB clk controller driver") Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Yixun Lan authored
Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by:
Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by:
-
Jerome Brunet authored
clk-audio-divider is no longer used, we can remove it. Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
It is actually a lot easier to setup the PLL with carefully chosen rates than relying on CCF clock propagation for this audio use case. This way, we can make sure we will always be able to provide the common audio clock rates, while having the PLL in the optimal operating range. For this, we stop the rate propagation at the mux picking the PLL and let it round to the closest matching PLL. Doing so, we can use the generic divider for the i2s clock. clk-audio-divider is no longer required. It was a (poor) attempt to use CCF rate propagation while making sure the PLL rate would be high enough to work with audio use cases. Acked-by:
-
Jerome Brunet authored
The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by:
-
Jerome Brunet authored
Add a driver to control the clock divider found in the sample clock generator of the axg audio clock controller. The sclk divider accumulates specific features which make the generic divider unsuitable to control it: - zero based divider (div = val + 1), but zero value gates the clock, so minimum divider value is 2. - lrclk variant may adjust the duty cycle depending the divider value and the 'hi' value. Acked-by:
-
Jerome Brunet authored
-
Jerome Brunet authored
Add a driver to control the output of the sample clock generator found in the axg audio clock controller. The goal of this driver is to coherently control the phase provided to the different element using the sample clock generator. This simplify the usage of the sample clock generator a lot, without comprising the ability of the SoC. Acked-by:
-
Jerome Brunet authored
Add a driver based meson clk-regmap to control clock phase on amlogic SoCs Acked-by:
-
Jerome Brunet authored
-
Jerome Brunet authored
Clean the dependencies in meson clock Kconfig. CLK_AMLOGIC should actually select CLK_REGMAP_MESON which it uses. Also, each platform should select CLK_AMLOGIC, so everything is properly turned on when the platform Kconfig enable each configuration flag Acked-by:
-
Jerome Brunet authored
The legacy method to access the hhi register space is not longer used. We can safely drop it now. Acked-by:
-
Jerome Brunet authored
Expose GEN_CLK clock id Signed-off-by: -
Dmitry Osipenko authored
Apparently there was an attempt to avoid out-of-bounds accesses when there is only one memory timing available, but there is a typo in the code that neglects that attempt. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
Memory Controller should be always-on. Currently the sibling EMC clock is marked as critical, let's mark MC clock too for consistency. Signed-off-by:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
-
Thierry Reding authored
The current default is to leave the VDE clock's parent at the default, which is clk_m. However, that is not a configuration that will allow the VDE to function. Reparent it to pll_c3 instead to make sure the hardware can actually decode video content. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
By default, the vic03 clock is a child of pll_m but that runs at 924 MHz which is too fast for VIC. Make vic03 a child of pll_c3 by default so it will run at a supported frequency. Signed-off-by:
-
- 08 Jul, 2018 1 commit
-
-
Mikko Perttunen authored
When registering clocks, we just skip any that fail to register (leaving a NULL hole in the clock table). However, our of_xlate function still tries to dereference each entry while looking for the clock with the requested id, causing a crash if any clocks failed to register. Add a check to of_xlate to skip any NULL clocks. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
- 07 Jul, 2018 1 commit
-
-
Alberto Panizzo authored
Register, shift and mask were wrong according to datasheet. Fixes: 11551005 ("clk: rockchip: add clock controller for the RK3399") Cc: stable@vger.kernel.org Signed-off-by:
Alberto Panizzo <alberto@amarulasolutions.com> Signed-off-by:
Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by:
-
- 06 Jul, 2018 2 commits
-
-
Stephen Boyd authored
This driver uses sizes.h, but relies on it being implicitly included somewhere else breaking random direct compilation of the file. Include sizes.h so we can build it those configurations too for better compile coverage. Signed-off-by: -
Fabio Estevam authored
Instead of explicitly enabling critical clocks via clk_prepare_enable(), let's use the standard CLK_IS_CRITICAL flag instead, which makes the code a bit shorter. Signed-off-by:
-
