- 22 Mar, 2020 6 commits
-
-
David S. Miller authored
Luo bin says: ==================== hinic: BugFixes Fix a number of bugs which have been present since the first commit. The bugs fixed in these patchs are hardly exposed unless given very specific conditions. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Luo bin authored
the minimum value of skb len that hw supports is 32 rather than 17 Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
the second input parameter of wait_for_completion_timeout should be jiffies instead of millisecond Signed-off-by:
-
Luo bin authored
add read barrier in driver code to keep from reading other fileds in dma memory which is writable for hw until we have verified the memory is valid for driver Signed-off-by:
-
Luo bin authored
should disable eq irq before freeing it, must clear event queue depth in hw before freeing relevant memory to avoid illegal memory access and update consumer idx to avoid invalid interrupt Signed-off-by:
-
Luo bin authored
it's unreliable for fw to check whether IO is stopped, so driver wait for enough time to ensure IO process is done in hw before freeing resources Signed-off-by:
-
- 21 Mar, 2020 2 commits
-
-
Florian Westphal authored
In rare cases retransmit logic will make a full skb copy, which will not trigger the zeroing added in recent change b738a185 ("tcp: ensure skb->dev is NULL before leaving TCP stack"). Cc: Eric Dumazet <edumazet@google.com> Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Refetch IP header pointer after pskb_may_pull() in flowtable, from Haishuang Yan. 2) Fix memleak in flowtable offload in nf_flow_table_free(), from Paul Blakey. 3) Set control.addr_type mask in flowtable offload, from Edward Cree. ==================== Signed-off-by:
-
- 20 Mar, 2020 6 commits
-
-
Eric Dumazet authored
skb->rbnode is sharing three skb fields : next, prev, dev When a packet is sent, TCP keeps the original skb (master) in a rtx queue, which was converted to rbtree a while back. __tcp_transmit_skb() is responsible to clone the master skb, and add the TCP header to the clone before sending it to network layer. skb_clone() already clears skb->next and skb->prev, but copies the master oskb->dev into the clone. We need to clear skb->dev, otherwise lower layers could interpret the value as a pointer to a netdev. This old bug surfaced recently when commit 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") was merged. Before this netfilter commit, skb->dev value was ignored and changed before reaching dev_queue_xmit() Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") Signed-off-by:
Martin Zaharinov <micron10@gmail.com> Cc: Florian Westphal <fw@strlen.de> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Rahul Lakkireddy authored
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
commit 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by:
-
René van Dorst authored
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by:
Andrew Smith <andrew.smith@digi.com> Signed-off-by:
René van Dorst <opensource@vdorst.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc, afs: Interruptibility fixes Here are a number of fixes for AF_RXRPC and AFS that make AFS system calls less interruptible and so less likely to leave the filesystem in an uncertain state. There's also a miscellaneous patch to make tracing consistent. (1) Firstly, abstract out the Tx space calculation in sendmsg. Much the same code is replicated in a number of places that subsequent patches are going to alter, including adding another copy. (2) Fix Tx interruptibility by allowing a kernel service, such as AFS, to request that a call be interruptible only when waiting for a call slot to become available (ie. the call has not taken place yet) or that a call be not interruptible at all (e.g. when we want to do writeback and don't want a signal interrupting a VM-induced writeback). (3) Increase the minimum delay on MSG_WAITALL for userspace sendmsg() when waiting for Tx buffer space as a 2*RTT delay is really small over 10G ethernet and a 1 jiffy timeout might be essentially 0 if at the end of the jiffy period. (4) Fix some tracing output in AFS to make it consistent with rxrpc. (5) Make sure aborted asynchronous AFS operations are tidied up properly so we don't end up with stuck rxrpc calls. (6) Make AFS client calls uninterruptible in the Rx phase. If we don't wait for the reply to be fully gathered, we can't update the local VFS state and we end up in an indeterminate state with respect to the server. ==================== Signed-off-by: -
Ido Schimmel authored
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 19 Mar, 2020 10 commits
-
-
Edward Cree authored
nf_flow_rule_match() sets control.addr_type in key, so needs to also set the corresponding mask. An exact match is wanted, so mask is all ones. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Paul Blakey authored
Freeing a flowtable with offloaded flows, the flow are deleted from hardware but are not deleted from the flow table, leaking them, and leaving their offload bit on. Add a second pass of the disabled gc to delete the these flows from the flow table before freeing it. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Haishuang Yan authored
Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by:Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
Since nf_flow_snat_port and nf_flow_snat_ip{v6} call pskb_may_pull() which may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: -
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.6-rc7 I originally intended to spend this cycle working on fun optimizations and architecture for WireGuard for 5.7, but I've been a bit neurotic about having 5.6 ship without any show stopper bugs. WireGuard has been stable for a long time now, but that doesn't make me any less nervous about the real deal in 5.6. To that end, I've been doing code reviews and having discussions, and we also had a security firm audit the code. That audit didn't turn up any vulnerabilities, but they did make a good defense-in-depth suggestion. This series contains: 1) Removal of a duplicated header, from YueHaibing. 2) Testing with 64-bit time in our test suite. 3) Account for skb->protocol==0 due to AF_PACKET sockets, suggested by Florian Fainelli. 4) Clean up some code in an unreachable switch/case branch, suggested by Florian Fainelli. 5) Better handling of low-order points, discussed with Mathias Hall-Andersen. ==================== Signed-off-by: -
Jason A. Donenfeld authored
We precompute the static-static ECDH during configuration time, in order to save an expensive computation later when receiving network packets. However, not all ECDH computations yield a contributory result. Prior, we were just not letting those peers be added to the interface. However, this creates a strange inconsistency, since it was still possible to add other weird points, like a valid public key plus a low-order point, and, like points that result in zeros, a handshake would not complete. In order to make the behavior more uniform and less surprising, simply allow all peers to be added. Then, we'll error out later when doing the crypto if there's an issue. This also adds more separation between the crypto layer and the configuration layer. Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
The situation in which we wind up hitting the default case here indicates a major bug in earlier parsing code. It is not a usual thing that should ever happen, which means a "friendly" message for it doesn't make sense. Rather, replace this with a WARN_ON, just like we do earlier in the file for a similar situation, so that somebody sends us a bug report and we can fix it. Reported-by:
Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by:
-
Jason A. Donenfeld authored
We carry out checks to the effect of: if (skb->protocol != wg_examine_packet_protocol(skb)) goto err; By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this means that the check above still passes in the case where skb->protocol is zero, which is possible to hit with AF_PACKET: struct sockaddr_pkt saddr = { .spkt_device = "wg0" }; unsigned char buffer[5] = { 0 }; sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0), buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr)); Additional checks mean that this isn't actually a problem in the code base, but I could imagine it becoming a problem later if the function is used more liberally. I would prefer to fix this by having wg_examine_packet_protocol return a 32-bit ~0 value on failure, which will never match any value of skb->protocol, which would simply change the generated code from a mov to a movzx. However, sparse complains, and adding __force casts doesn't seem like a good idea, so instead we just add a simple helper function to check for the zero return value. Since wg_examine_packet_protocol itself gets inlined, this winds up not adding an additional branch to the generated code, since the 0 return value already happens in a mergable branch. Reported-by: -
Jason A. Donenfeld authored
In case this helps expose bugs with the newer 64-bit time_t types, we do our testing with the newer musl that supports this as well as CONFIG_COMPAT_32BIT_TIME=n. This matters to us, since wireguard does in fact deal with timestamps. Signed-off-by:
-
YueHaibing authored
This commit removes a duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 18 Mar, 2020 16 commits
-
-
Taehee Yoo authored
gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer")` Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Paul Blakey authored
Currently, on replace, the previous action instance params is swapped with a newly allocated params. The old params is only freed (via kfree_rcu), without releasing the allocated ct zone template related to it. Call tcf_ct_params_free (via call_rcu) for the old params, so it will release it. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
-
Mauro Carvalho Chehab authored
There's a markup for link with is "foo_". On this kernel-doc comment, we don't want this, but instead, place a literal reference. So, escape the literal with ``foo``, in order to avoid this warning: ./net/core/dev.c:5195: WARNING: Unknown target name: "page_is". Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The indentation for the returned values are weird, causing those warnings: ./drivers/net/phy/sfp-bus.c:579: WARNING: Unexpected indentation. ./drivers/net/phy/sfp-bus.c:619: WARNING: Unexpected indentation. Use a list and change the identation for it to be properly parsed by the documentation toolchain. Signed-off-by:
-
David S. Miller authored
Arthur Kiyanovski says: ==================== ENA driver bug fixes ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Arthur Kiyanovski authored
last_keep_alive_jiffies is updated in probe and when a keep-alive event is received. In case the driver times-out on a keep-alive event, it has high chances of continuously timing-out on keep-alive events. This is because when the driver recovers from the keep-alive-timeout reset the value of last_keep_alive_jiffies is very old, and if a keep-alive event is not received before the next timer expires, the value of last_keep_alive_jiffies will cause another keep-alive-timeout reset and so forth in a loop. Solution: Update last_keep_alive_jiffies whenever the device is restored after reset. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Noam Dagan <ndagan@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Arthur Kiyanovski authored
Rx req_id is an index in struct ena_eth_io_rx_cdesc_base. The driver should validate that the Rx req_id it received from the device is in range [0, ring_size -1]. Failure to do so could yield to potential memory access violoation. The validation was mistakenly done when refilling the Rx submission queue and not in Rx completion queue. Fixes: ad974bae ("net: ena: add support for out of order rx buffers refill") Signed-off-by:
-
Arthur Kiyanovski authored
Bug: In short the main issue is caused by the fact that the number of queues is changed using ethtool after ena_probe() has been called and before ena_up() was executed. Here is the full scenario in detail: * ena_probe() is called when the driver is loaded, the driver is not up yet at the end of ena_probe(). * The number of queues is changed -> io_queue_count is changed as well - ena_up() is not called since the "dev_was_up" boolean in ena_update_queue_count() is false. * ena_up() is called by the kernel (it's called asynchronously some time after ena_probe()). ena_setup_io_intr() is called by ena_up() and it uses io_queue_count to get the suitable irq lines for each msix vector. The function ena_request_io_irq() is called right after that and it uses msix_vecs - This value only changes during ena_probe() and ena_restore() - to request the irq vectors. This results in "Failed to request I/O IRQ" error for i > io_queue_count. Numeric example: * After ena_probe() io_queue_count = 8, msix_vecs = 9. * The number of queues changes to 4 -> io_queue_count = 4, msix_vecs = 9. * ena_up() is executed for the first time: ** ena_setup_io_intr() inits the vectors only up to io_queue_count. ** ena_request_io_irq() calls request_irq() and fails for i = 5. How to reproduce: simply run the following commands: sudo rmmod ena && sudo insmod ena.ko; sudo ethtool -L eth1 combined 3; Fix: Use ENA_MAX_MSIX_VEC(adapter->num_io_queues + adapter->xdp_num_queues) instead of adapter->msix_vecs. We need to take XDP queues into consideration as they need to have msix vectors assigned to them as well. Note that the XDP cannot be attached before the driver is up and running but in XDP mode the issue might occur when the number of queues changes right after a reset trigger. The ENA_MAX_MSIX_VEC simply adds one to the argument since the first msix vector is reserved for management queue. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Arthur Kiyanovski authored
Overview: We don't frequently change the msix vectors throughout the life cycle of the driver. We do so in two functions: ena_probe() and ena_restore(). ena_probe() is only called when the driver is loaded. ena_restore() on the other hand is called during device reset / resume operations. We use num_io_queues for calculating and allocating the number of msix vectors. At ena_probe() this value is equal to max_num_io_queues and thus this is not an issue, however ena_restore() might be called after the number of io queues has changed. A possible bug scenario is as follows: * Change number of queues from 8 to 4. (num_io_queues = 4, max_num_io_queues = 8, msix_vecs = 9,) * Trigger reset occurs -> ena_restore is called. (num_io_queues = 4, max_num_io_queues =8 , msix_vecs = 5) * Change number of queues from 4 to 6. (num_io_queues = 6, max_num_io_queues = 8, msix_vecs = 5) * The driver will reset due to failure of check_for_rx_interrupt_queue() Fix: This can be easily fixed by always using max_num_io_queues to init the msix_vecs, since this number won't change as opposed to num_io_queues. Fixes: 4d192660 ("net: ena: multiple queue creation related cleanups") Signed-off-by:
-
Rayagonda Kokatanur authored
Check clk_prepare_enable() return value. Fixes: 2c723044 ("net: phy: Add pm support to Broadcom iProc mdio mux driver") Signed-off-by:
Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Doug Berger says: ==================== net: bcmgenet: revisit MAC reset Commit 3a55402c ("net: bcmgenet: use RGMII loopback for MAC reset") was intended to resolve issues with reseting the UniMAC core within the GENET block by providing better control over the clocks used by the UniMAC core. Unfortunately, it is not compatible with all of the supported system configurations so an alternative method must be applied. This commit set provides such an alternative. The first commit reverts the previous change and the second commit provides the alternative reset sequence that addresses the concerns observed with the previous implementation. This replacement implementation should be applied to the stable branches wherever commit 3a55402c ("net: bcmgenet: use RGMII loopback for MAC reset") has been applied. Unfortunately, reverting that commit may conflict with some restructuring changes introduced by commit 4f8d81b7 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config"). The first commit in this set has been manually edited to resolve the conflict on net/master. I would be happy to help stable maintainers with resolving any such conflicts if they occur. However, I do not expect that commit to have been backported to stable branch so hopefully the revert can be applied cleanly. ==================== Signed-off-by:
-
Doug Berger authored
As noted in commit 28c2d1a7 ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked at least 5 cycles while the sw_reset is asserted to ensure a clean reset. That commit enabled local loopback to provide an Rx clock from the GENET sourced Tx clk. However, when connected in MII mode the Tx clk is sourced by the PHY so if an EPHY is not supplying clocks (e.g. when the link is down) the UniMAC does not receive the necessary clocks. This commit extends the sw_reset window until the PHY reports that the link is up thereby ensuring that the clocks are being provided to the MAC to produce a clean reset. One consequence is that if the system attempts to enter a Wake on LAN suspend state when the PHY link has not been active the MAC may not have had a chance to initialize cleanly. In this case, we remove the sw_reset and enable the WoL reception path as normal with the hope that the PHY will provide the necessary clocks to drive the WoL blocks if the link becomes active after the system has entered suspend. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
-
Doug Berger authored
This reverts commit 3a55402c. This is not a good solution when connecting to an external switch that may not support the isolation of the TXC signal resulting in output driver contention on the pin. A different solution is necessary. Signed-off-by:
-
David S. Miller authored
Chris Packham says: ==================== net: mvmdio: avoid error message for optional IRQ I've gone ahead an sent a revert. This is the same as the original v1 except I've added Andrew's review to the commit message. ==================== Signed-off-by: -
Chris Packham authored
Per the dt-binding the interrupt is optional so use platform_get_irq_optional() instead of platform_get_irq(). Since commit 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() produces an error message orion-mdio f1072004.mdio: IRQ index 0 not found which is perfectly normal if one hasn't specified the optional property in the device tree. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
-
Chris Packham authored
This reverts commit e1f550dc. platform_get_irq_optional() will still return -ENXIO when no interrupt is provided so the additional error handling caused the driver prone to fail when no interrupt was specified. Revert the change so we can apply the correct minimal fix. Signed-off-by:
-
