- 13 Jul, 2022 4 commits
-
-
Ioana Ciornei authored
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ioana Ciornei authored
Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use the preferred -gpios suffix. Also, with this change the dtb_check will not complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by:
-
Ioana Ciornei authored
Rename the dt nodes shown in the sff,sfp.yaml examples so that they are generic and not really tied to a specific platform. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ioana Ciornei authored
Convert the sff,sfp.txt bindings to the DT schema format. Also add the new path to the list of maintained files. Signed-off-by:
-
- 12 Jul, 2022 20 commits
-
-
Zhengchao Shao authored
The type of ip_route_input_rcu should be static. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220711073549.8947-1-shaozhengchao@huawei.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Moshe Shemesh Says: =================== 1) Fix devlink lock in mlx5 devlink eswitch callbacks Following the commit 14e426bf "devlink: hold the instance lock during eswitch_mode callbacks" which takes devlink instance lock for all devlink eswitch callbacks and adds a temporary workaround, this patchset removes the workaround, replaces devlink API functions by devl_ API where called from mlx5 driver eswitch callbacks flows and adds devlink instance lock in other driver's path that leads to these functions. While moving to devl_ API the patchset removes part of the devlink API functions which mlx5 was the last one to use and so not used by any driver now. The patchset also remove DEVLINK_NL_FLAG_NO_LOCK flag from the callbacks of port_new/port which are called only from mlx5 driver and the already locked by the patchset as parallel paths to the eswitch callbacks using devl_ API functions. This patchset will be followed by another patchset that will remove DEVLINK_NL_FLAG_NO_LOCK flag from devlink reload and devlink health callbacks. Thus we will have all devlink callbacks locked and it will pave the way to remove devlink mutex. =================== Link: https://lore.kernel.org/r/20220711081408.69452-1-saeed@kernel.orgSigned-off-by:
-
Moshe Shemesh authored
Let the core take the devlink instance lock around port_new and port_del callbacks and remove the now redundant locking in the only driver that currently use them. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
The callback mlx5_devlink_eswitch_mode_set() had unlocked devlink as a temporary workaround once devlink instance lock was added to devlink eswitch callbacks. Now that all flows triggered by this function that took devlink lock are using devl_ API and all parallel paths are locked we can remove this workaround. Signed-off-by:
-
Moshe Shemesh authored
As part of the flows invoked by mlx5_devlink_eswitch_mode_set() get to mlx5_rescan_drivers_locked() which can call mlx5e_probe()/mlx5e_remove and register/unregister mlx5e driver ports accordingly. This can lead to deadlock once mlx5_devlink_eswitch_mode_set() will use devlink lock. Use devl_port_register/unregister() instead of devlink_port_register/unregister() and add devlink instance locks in the driver paths to this function to have it locked while calling devl_ API function. If remove or probe were called by module init or module cleanup flows, need to lock devlink just before calling devl_port_register(), otherwise it is called by attach/detach or register/unregister flow and we can have the flow locked. Added flag to distinguish between these cases. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink locked. Signed-off-by:
-
Moshe Shemesh authored
The previous patch removed the last usage of the functions devlink_rate_leaf_create() and devlink_rate_nodes_destroy(). Thus, remove these function from devlink API. Signed-off-by:
-
Moshe Shemesh authored
The function mlx5_esw_devlink_sf_port_register() calls devlink_port_register() and devlink_rate_leaf_create(). Use devl_ API to call devl_port_register() and devl_rate_leaf_create() accordingly and add devlink instance lock in driver paths to this function. Similarly, use devl_ API to call devl_port_unregister() and devl_rate_leaf_destroy() in mlx5_esw_devlink_sf_port_unregister() and ensure locking devlink instance lock on all the paths to this function too. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Note this patch is taking devlink lock on mlx5_devlink_sf_port_new/del() which are devlink callbacks for port_new/del(). We will take these locks off once these callbacks will be locked by devlink too. Signed-off-by:
-
Moshe Shemesh authored
The function mlx5_esw_offloads_devlink_port_register() calls devlink_port_register() and devlink_rate_leaf_create(). Use devl_ API to call devl_port_register() and devl_rate_leaf_create() accordingly and add devlink instance lock in driver paths to this function. Similarly, use devl_ API to call devl_port_unregister() and devl_rate_leaf_destroy() in mlx5_esw_offloads_devlink_port_unregister() and ensure locking devlink instance lock on the paths to this function too. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Signed-off-by:
-
Moshe Shemesh authored
The previous patch removed the last usage of the function devlink_rate_nodes_destroy(). Thus, remove this function from devlink API. Signed-off-by:
-
Moshe Shemesh authored
Use devl_rate_nodes_destroy() instead of devlink_rate_nodes_destroy(). Add devlink instance lock in the driver paths to this function to have it locked while calling devl_ API function. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Signed-off-by:
-
Moshe Shemesh authored
The function mlx5_eswtich_mode_callback_enter() was added as a temporary workaround once devlink instance lock was added to devlink eswitch callbacks. However, code review and testing show that all the callbacks part to eswitch_mode_set don't take devlink instance lock in any flow and so unlocking devlink instance lock while entering these functions is not needed. Remove devl_lock from mlx5_eswtich_mode_callback_enter() and devl_unlock from mlx5_eswtich_mode_callback_exit(). Also remove the functions mlx5_eswtich_mode_callback_enter()/exit() as they are not needed any more. The callback eswitch_mode_set will be treated separately in the following patches. Signed-off-by:
-
Justin Stitt authored
When building with Clang we encounter the following warning: | drivers/net/ethernet/amd/xgbe/xgbe-dcb.c:234:42: error: format specifies | type 'unsigned char' but the argument has type '__u16' (aka 'unsigned | short') [-Werror,-Wformat] pfc->pfc_cap, pfc->pfc_en, pfc->mbc, | pfc->delay); pfc->pfc_cap , pfc->pfc_cn, pfc->mbc are all of type `u8` while pfc->delay is of type `u16`. The correct format specifiers `%hh[u|x]` were used for the first three but not for pfc->delay, which is causing the warning above. Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. In this case `%d` (or `%x` to maintain hex representation) should be used since both u8's and u16's are fully representable by an int. Moreover, C11 6.3.1.1 states: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/7f795bd6d5b2a00f581175b7069b229c2e5a4192.1657379127.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/8306e2ae69a5d8553691f5d10a86a4390daf594b.1657376651.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tls: rx: follow-ups to NoPad A few fixes for issues spotted by Maxim. ==================== Link: https://lore.kernel.org/r/20220709025255.323864-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Make sure setsockopt / getsockopt behave as expected. Signed-off-by: -
Jakub Kicinski authored
Maxim reports do_tls_getsockopt_no_pad() will always return an error. Indeed looks like refactoring gone wrong - remove err and use value. Reported-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Fixes: 88527790 ("tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3") Signed-off-by:
-
Jakub Kicinski authored
As discussed with Maxim add a counter for true NoPad violations. This should help deployments catch unexpected padded records vs just control records which always need re-encryption. https: //lore.kernel.org/all/b111828e6ac34baad9f4e783127eba8344ac252d.camel@nvidia.com/ Signed-off-by: -
Jakub Kicinski authored
MIN -> MIB Fixes: 88527790 ("tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3") Signed-off-by:
-
- 11 Jul, 2022 16 commits
-
-
Sieng-Piaw Liew authored
NAPI poll() function may be passed a budget value of zero, i.e. during netpoll, which isn't NAPI context. Therefore, napi_consume_skb() must be given budget value instead of !force to truly discern netpoll-like scenarios. Fixes: c63c615e ("bcm63xx_enet: switch to napi_build_skb() to reuse skbuff_heads") Signed-off-by:
Sieng-Piaw Liew <liew.s.piaw@gmail.com> Link: https://lore.kernel.org/r/20220708080303.298-1-liew.s.piaw@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Ratheesh Kannoth says: ==================== octeontx2: Exact Match Table. Exact match table and Field hash support for CN10KB silicon ==================== Link: https://lore.kernel.org/r/20220708044151.2972645-1-rkannoth@marvell.comSigned-off-by:
-
Ratheesh Kannoth authored
Enabled EXACT match flag in Kex default profile. Since there is no space in key, NPC_PARSE_NIBBLE_ERRCODE is removed Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Ratheesh Kannoth authored
NPC exact match table can support more entries than RPM dmac filters. This requires field size of DMAC filter count and index to be increased. Signed-off-by:
-
Ratheesh Kannoth authored
If exact match table is supported, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by:
-
Ratheesh Kannoth authored
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by:
-
Ratheesh Kannoth authored
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by:
-
Ratheesh Kannoth authored
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by:
-
Ratheesh Kannoth authored
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by:
-
Ratheesh Kannoth authored
FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'test'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jilin Yuan authored
Delete the redundant word 'driver'. Signed-off-by:
-
