- 01 Apr, 2020 19 commits
-
-
Vladimir Oltean authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit c26a2c2d ] The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue. But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing. Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar. There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver. So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it. [0]: https://www.spinics.net/lists/netdev/msg619699.html Fixes: f0ee7acf ("gianfar: Add hardware TX timestamping support") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 216b4400 ] The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a static checker warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes() error: dereferencing freed memory 'pkt' It looks like there was supposed to be a continue after we free "pkt". Fixes: 4754fcee ("brcmfmac: streamline SDIO read frame routine") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paul Kocialkowski authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit fd1a5e52 ] psbfb_probe performs an evaluation of the required size from the stolen GTT memory, but gets it wrong in two distinct ways: - The resulting size must be page-size-aligned; - The size to allocate is derived from the surface dimensions, not the fb dimensions. When two connectors are connected with different modes, the smallest will be stored in the fb dimensions, but the size that needs to be allocated must match the largest (surface) dimensions. This is what is used in the actual allocation code. Fix this by correcting the evaluation to conform to the two points above. It allows correctly switching to 16bpp when one connector is e.g. 1920x1080 and the other is 1024x768. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1868627 This reverts commit 57211b73. This patch isn't needed on 4.19 and older. Signed-off-by:
-
Allen Pais authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 35a79a63 upstream. alloc_workqueue is not checked for errors and as a result a potential NULL dereference could occur. Link: https://lore.kernel.org/r/1568824618-4366-1-git-send-email-allen.pais@oracle.comSigned-off-by:
Allen Pais <allen.pais@oracle.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [Ajay: Rewrote this patch for v4.4.y, as 4.4.y codebase is different from mainline] Signed-off-by:
Ajay Kaher <akaher@vmware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
David Sterba authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit e8294f2f ] There's no logged information about tree-log replay although this is something that points to previous unclean unmount. Other filesystems report that as well. Suggested-by:
Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit c96dceea ] Commit 904cdbd4 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE. rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops *) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped. For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag. Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd4 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 6a66a7de ] There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer(). Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.comReviewed-by:
-
Mike Jones authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit cf2b012c upstream. Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands. Signed-off-by:
Mike Jones <michael-a1.jones@analog.com> Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com Fixes: e04d1ce9 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 0f8a206d upstream. Clang warns: In file included from ../arch/s390/boot/startup.c:3: In file included from ../include/linux/elf.h:5: In file included from ../arch/s390/include/asm/elf.h:132: In file included from ../include/linux/compat.h:10: In file included from ../include/linux/time.h:74: In file included from ../include/linux/time32.h:13: In file included from ../include/linux/timex.h:65: ../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] get_tod_clock_ext(clk); ^~~ ../arch/s390/include/asm/timex.h:149:44: note: passing argument to parameter 'clk' here static inline void get_tod_clock_ext(char *clk) ^ Change clk's type to just be char so that it matches what happens in get_tod_clock_ext. Fixes: 57b28f66 ("[S390] s390_hypfs: Add new attributes") Link: https://github.com/ClangBuiltLinux/linux/issues/861 Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.comReviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Herbert Xu authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 07928d9b upstream. The function padata_flush_queues is fundamentally broken because it cannot force padata users to complete the request that is underway. IOW padata has to passively wait for the completion of any outstanding work. As it stands flushing is used in two places. Its use in padata_stop is simply unnecessary because nothing depends on the queues to be flushed afterwards. The other use in padata_replace is more substantial as we depend on it to free the old pd structure. This patch instead uses the pd->refcnt to dynamically free the pd structure once all requests are complete. Fixes: 2b73b07a ("padata: Flush the padata queues actively") Cc: <stable@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by:
-
David Sterba authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 10a3a3ed upstream. A remount to a read-write filesystem is not safe when there's tree-log to be replayed. Files that could be opened until now might be affected by the changes in the tree-log. A regular mount is needed to replay the log so the filesystem presents the consistent view with the pending changes included. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit ac05ca91 upstream. We have a few cases where we allow an extent map that is in an extent map tree to be merged with other extents in the tree. Such cases include the unpinning of an extent after the respective ordered extent completed or after logging an extent during a fast fsync. This can lead to subtle and dangerous problems because when doing the merge some other task might be using the same extent map and as consequence see an inconsistent state of the extent map - for example sees the new length but has seen the old start offset. With luck this triggers a BUG_ON(), and not some silent bug, such as the following one in __do_readpage(): $ cat -n fs/btrfs/extent_io.c 3061 static int __do_readpage(struct extent_io_tree *tree, 3062 struct page *page, (...) 3127 em = __get_extent_map(inode, page, pg_offset, cur, 3128 end - cur + 1, get_extent, em_cached); 3129 if (IS_ERR_OR_NULL(em)) { 3130 SetPageError(page); 3131 unlock_extent(tree, cur, end); 3132 break; 3133 } 3134 extent_offset = cur - em->start; 3135 BUG_ON(extent_map_end(em) <= cur); (...) Consider the following example scenario, where we end up hitting the BUG_ON() in __do_readpage(). We have an inode with a size of 8KiB and 2 extent maps: extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by a previous transaction extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet persisted but writeback started for it already. The extent map is pinned since there's writeback and an ordered extent in progress, so it can not be merged with extent map A yet The following sequence of steps leads to the BUG_ON(): 1) The ordered extent for extent B completes, the respective page gets its writeback bit cleared and the extent map is unpinned, at that point it is not yet merged with extent map A because it's in the list of modified extents; 2) Due to memory pressure, or some other reason, the MM subsystem releases the page corresponding to extent B - btrfs_releasepage() is called and returns 1, meaning the page can be released as it's not dirty, not under writeback anymore and the extent range is not locked in the inode's iotree. However the extent map is not released, either because we are not in a context that allows memory allocations to block or because the inode's size is smaller than 16MiB - in this case our inode has a size of 8KiB; 3) Task B needs to read extent B and ends up __do_readpage() through the btrfs_readpage() callback. At __do_readpage() it gets a reference to extent map B; 4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B while holding the write lock on the inode's extent map tree - this results in try_merge_map() being called and since it's possible to merge extent map B with extent map A now (the extent map B was removed from the list of modified extents), the merging begins - it sets extent map B's start offset to 0 (was 4KiB), but before it increments the map's length to 8KiB (4kb + 4KiB), task A is at: BUG_ON(extent_map_end(em) <= cur); The call to extent_map_end() sees the extent map has a start of 0 and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so the BUG_ON() is triggered. So it's dangerous to modify an extent map that is in the tree, because some other task might have got a reference to it before and still using it, and needs to see a consistent map while using it. Generally this is very rare since most paths that lookup and use extent maps also have the file range locked in the inode's iotree. The fsync path is pretty much the only exception where we don't do it to avoid serialization with concurrent reads. Fix this by not allowing an extent map do be merged if if it's being used by tasks other then the one attempting to merge the extent map (when the reference count of the extent map is greater than 2). Reported-by:
ryusuke1925 <st13s20@gm.ibaraki-ct.ac.jp> Reported-by:
Koki Mitani <koki.mitani.xg@hco.ntt.co.jp> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 48a34311 upstream. DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444 ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Zhihao Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit f5de5b83 upstream. In ubifs, concurrent execution of writepage and bulk read on the same file may cause ABBA deadlock, for example (Reproduce method see Link): Process A(Bulk-read starts from page4) Process B(write page4 back) vfs_read wb_workfn or fsync ... ... generic_file_buffered_read write_cache_pages ubifs_readpage LOCK(page4) ubifs_bulk_read ubifs_writepage LOCK(ui->ui_mutex) ubifs_write_inode ubifs_do_bulk_read LOCK(ui->ui_mutex) find_or_create_page(alloc page4) ↑ LOCK(page4) <-- ABBA deadlock occurs! In order to ensure the serialization execution of bulk read, we can't remove the big lock 'ui->ui_mutex' in ubifs_bulk_read(). Instead, we allow ubifs_do_bulk_read() to lock page failed by replacing find_or_create_page(FGP_LOCK) with pagecache_get_page(FGP_LOCK | FGP_NOWAIT). Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Arvind Sankar authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 93f9d1a4 upstream. The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.eduSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit b4a81b87 upstream. In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr' fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated, leading to a memory leak bug. To fix this issue, free 'ecryptfs_daemon_hash' before returning the error. Cc: stable@vger.kernel.org Fixes: 88b4a07e ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit fe2e082f upstream. In parse_tag_1_packet(), if tag 1 packet contains a key larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to the label 'out_free' to perform the cleanup work. Cc: stable@vger.kernel.org Fixes: dddfa461 ("[PATCH] eCryptfs: Public key; packet management") Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 44eeb081 upstream. Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow. Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.deSigned-off-by:
-
- 15 Mar, 2020 21 commits
-
-
Khalid Elmously authored
Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1867243 Properties: no-test-build Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Khalid Elmously authored
Commit "1505f7d8596c5349 of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc" introduced a new config change. updateconfigs accordingly Ignore: yes Signed-off-by: -
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1864775Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Mike Snitzer authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 47ace7e0 upstream. Move blk_queue_make_request() to dm.c:alloc_dev() so that q->make_request_fn is never NULL during the lifetime of a DM device (even one that is created without a DM table). Otherwise generic_make_request() will crash simply by doing: dmsetup create -n test mount /dev/dm-N /mnt While at it, move ->congested_data initialization out of dm.c:alloc_dev() and into the bio-based specific init method. Reported-by:
Stefan Bader <stefan.bader@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1860231 Fixes: ff36ab34 ("dm: remove request-based logic from make_request_fn wrapper") Depends-on: c12c9a3c ("dm: various cleanups to md->queue initialization code") Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [smb: adjusted for context and dm_init_md_queue() exitsting in older kernels, and congested_data embedded in backing_dev_info, and dm_init_normal_md_queue() was called dm_init_old_md_queue()] Signed-off-by:
-
Nicolai Stange authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 1754c4f6 ] Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing() and made it to return on overflow. However, the aforementioned commit doesn't set the return value accordingly and thus, lbs_ibss_join_existing() would return with zero even though it failed. Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the number of supplied rates fails. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
-
Nicolai Stange authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit c7bf1fb7 ] Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing(). Unfortunately, it introduced a return path from within a RCU read side critical section without a corresponding rcu_read_unlock(). Fix this. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
-
Qing Xu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit b70261a2 ] mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Qing Xu <m1s5p6688@gmail.com> Signed-off-by:
-
Qing Xu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 3a9b153c ] mwifiex_ret_wmm_get_status() calls memcpy() without checking the destination size.Since the source is given from remote AP which contains illegal wmm elements , this may trigger a heap buffer overflow. Fix it by putting the length check before calling memcpy(). Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 805f6357 upstream. The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.beSigned-off-by:
-
Alexey Kardashevskiy authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 7559d3d2 upstream. By default a pseries guest supports a H_PUT_TCE hypercall which maps a single IOMMU page in a DMA window. Additionally the hypervisor may support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once; this is advertised via the device tree /rtas/ibm,hypertas-functions property which Linux converts to FW_FEATURE_MULTITCE. FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however the code managing the huge DMA window (DDW) ignores it and calls H_PUT_TCE_INDIRECT even if it is explicitly disabled via the "multitce=off" kernel command line parameter. This adds FW_FEATURE_MULTITCE checking to the DDW code path. This changes tce_build_pSeriesLP to take liobn and page size as the huge window does not have iommu_table descriptor which usually the place to store these numbers. Fixes: 4e8b0cf4 ("powerpc/pseries: Add support for dynamic dma windows") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ruSigned-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit a7e0f3fc upstream. The clock rate range for the TCB1 clock is missing. define it in the device tree. Reported-by:
Karl Rudbæk Olsen <karl@micro-technic.com> Fixes: d2e8190b ("ARM: at91/dt: define sama5d3 clocks") Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit ee0aa926 upstream. Currently the maximum rate for peripheral clock is calculated based on a typical 133MHz MCK. The maximum frequency is defined in the datasheet as a ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the device trees to match the maximum rate based on 166MHz. Reported-by:
-
Jose Abreu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 7980dff3 upstream. Add a missing property to GMAC node so that multicast filtering works correctly. Fixes: 556cc1c5 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)") Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Paul Kocialkowski authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit f236a2a2 upstream. The current code returns -EPERM when the voltage loss bit is set. Since the bit indicates that the time value is not valid, return -EINVAL instead, which is the appropriate error code for this situation. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
-
Bean Huo authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit b9fc5320 upstream. A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this value, and doesn't report this failure to upper caller. This patch is to fix this issue. Fixes: 2a8fa600 ("ufs: manually add well known logical units") Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.comReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Ranjani Sridharan authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit acbf2774 ] Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command. In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active. The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Song Liu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 00346155 upstream. Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of a perf ring buffer may lead to an integer underflow in locked memory accounting. This may lead to the undesired behaviors, such as failures in BPF map creation. Address this by adjusting the accounting logic to take into account the possibility that the amount of already locked memory may exceed the current limit. Fixes: c4b75479 ("perf/core: Make the mlock accounting simple again") Suggested-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Acked-by:
-
