- 29 Mar, 2021 40 commits
-
-
Alex Elder authored
Entries in an IPA route or filter table are 64-bit little-endian addresses, each of which refers to a routing or filtering rule. The format of these table slots are fixed, but IPA_TABLE_ENTRY_SIZE is used to define their size. This symbol doesn't really add value, and I think it unnecessarily obscures what a table entry *is*. So get rid of IPA_TABLE_ENTRY_SIZE, and just use sizeof(__le64) in its place throughout the code. Update the comments in "ipa_table.c" to provide a little better explanation of these table slots. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
A recent patch avoided doing 64-bit modulo operations by checking the alignment of some DMA allocations using only the lower 32 bits of the address. David Laight pointed out (after the fix was committed) that DMA allocations might already satisfy the alignment requirements. And he was right. Remove the alignment checks that occur after DMA allocation requests, and update comments to explain why the constraint is satisfied. The only place IPA_TABLE_ALIGN was used was to check the alignment; it is therefore no longer needed, so get rid of it. Add comments where GSI_RING_ELEMENT_SIZE and the tre_count and event_count channel data fields are defined to make explicit they are required to be powers of 2. Revise a comment in gsi_trans_pool_init_dma(), taking into account that dma_alloc_coherent() guarantees its result is aligned to a page size (or order thereof). Don't bother printing an error if a DMA allocation fails. Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
-
Alex Elder authored
Rename the SC7180 configuration data file so that its name is derived from its IPA version. Update a few other references to the code that talk about the SC7180 rather than just IPA v4.2. Signed-off-by:
-
Alex Elder authored
Rename the SDM845 configuration data file so that its name is derived from its IPA version. I am not aware of any special IPA behavior or handling that would be based on a specific SoC (as opposed to a specific version of the IPA it contains). Update a few other references to the code that talk about the SDM845 rather than just IPA v3.5.1. Signed-off-by:
-
Alex Elder authored
We don't typically need much information about modem endpoints. Normally we need to specify information about modem endpoints in configuration data in only two cases: - When a modem TX endpoint supports filtering - When another endpoint's configuration refers to it For the first case, the AP initializes the filter table, and must know how many endpoints (AP and modem) support filtering. An example of the second case is the AP->modem TX endpoint, which defines the modem<-AP RX endpoint as its status endpoint. There is one exception to this, and it's due to a hardware quirk. For IPA v4.2 (only) there is a problem related to allocating GSI channels. And to work around this, the AP allocates *all* GSI channels at startup time--including those used by the modem. Get rid of the configuration information for two endpoints not required for the SDM845. SC7180 runs IPA v4.2, so we can't eliminate any modem endpoint definitions there. Two more minor changes: - Reorder the members defined for the ipa_endpoint_name enumerated type to match the order used in configuration data files when defining endpoints. - Add a new name, IPA_ENDPOINT_MODEM_DL_NLO_TX, which can be used for IPA v4.5+. Signed-off-by: -
Alex Elder authored
The backward compatibility register value is a platform-specific property that is not stored in the platform data. Create a data field where this can be represented, and get rid ipa_reg_bcr_val(). This register is not present starting with IPA v4.5. Signed-off-by:
-
Alex Elder authored
Fix all warnings produced when running: scripts/kernel-doc -none drivers/net/ipa/*.[ch] Signed-off-by:
-
Guobin Huang authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Guobin Huang <huangguobin4@huawei.com> Signed-off-by:
-
Guobin Huang authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by:
-
Guobin Huang authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by:
-
Guobin Huang authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by:
-
Junlin Yang authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Junlin Yang <yangjunlin@yulong.com> Signed-off-by:
-
Yang Yingliang authored
Add the missing unlock before return from stmmac_suspend() in the error handling case. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
kernel test robot authored
Opportunity for min() Generated by: scripts/coccinelle/misc/minmax.cocci CC: Denis Efremov <efremov@linux.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/nfc/digital_core.c:473: warning: expecting prototype for start_poll operation(). Prototype was for digital_start_poll() instead Reported-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/ipv6/ip6_tunnel.c:401: warning: expecting prototype for parse_tvl_tnl_enc_lim(). Prototype was for ip6_tnl_parse_tlv_enc_lim() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/9p/client.c:133: warning: expecting prototype for parse_options(). Prototype was for parse_opts() instead net/9p/client.c:269: warning: expecting prototype for p9_req_alloc(). Prototype was for p9_tag_alloc() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/9p/trans_fd.c:881: warning: expecting prototype for p9_mux_destroy(). Prototype was for p9_conn_destroy() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/9p/error.c:207: warning: expecting prototype for errstr2errno(). Prototype was for p9_errstr2errno() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/core/netevent.c:45: warning: expecting prototype for netevent_unregister_notifier(). Prototype was for unregister_netevent_notifier() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/core/dev_addr_lists.c:732: warning: expecting prototype for dev_uc_flush(). Prototype was for dev_uc_init() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/netlabel/netlabel_mgmt.c:78: warning: expecting prototype for netlbl_mgmt_add(). Prototype was for netlbl_mgmt_add_common() instead Reported-by:
-
Xiongfeng Wang authored
Fix the following W=1 kernel build warning(s): net/l3mdev/l3mdev.c:111: warning: expecting prototype for l3mdev_master_ifindex(). Prototype was for l3mdev_master_ifindex_rcu() instead net/l3mdev/l3mdev.c:145: warning: expecting prototype for l3mdev_master_upper_ifindex_by_index(). Prototype was for l3mdev_master_upper_ifindex_by_index_rcu() instead Reported-by:
-
Ilya Lipnitskiy authored
Three minor changes: - When disabling PLL, there is no need to call core_write_mmd_indirect directly, use the core_write wrapper instead like the rest of the code in the function does. This change helps with consistency and readability. Move the comment to the definition of core_read_mmd_indirect where it belongs. - Disable both core and TRGMII Tx clocks prior to reconfiguring. Previously, only the core clock was disabled, but not TRGMII Tx clock. So disable both, then configure them, then re-enable both, for consistency. - The core clock enable bit (REG_GSWCK_EN) is written redundantly three times. Simplify the code and only write the register only once at the end of clock reconfiguration to enable both core and TRGMII Tx clocks. Tested on Ubiquiti ER-X running the GMAC0 and MT7530 in TRGMII mode. Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Liu Jian authored
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c: In function 'hclge_clear_arfs_rules': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:7173:1: error: no return statement in function returning non-void [-Werror=return-type] 7173 | } | ^ cc1: some warnings being treated as errors make[6]: *** [scripts/Makefile.build:273: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.o] Error 1 make[5]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3/hns3pf] Error 2 make[4]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon] Error 2 make[2]: *** [scripts/Makefile.build:534: drivers/net/ethernet] Error 2 make[1]: *** [scripts/Makefile.build:534: drivers/net] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1980: drivers] Error 2 Reported-by:Liu Jian <liujian56@huawei.com> Signed-off-by:
-
Petr Machata authored
After resilient next-hop groups have been added recently, there are two types of multipath next-hop groups: the legacy "mpath", and the new "resilient". Calling the legacy next-hop group type "mpath" is unfortunate, because that describes the fact that a packet could be forwarded in one of several paths, which is also true for the resilient next-hop groups. Therefore, to make the naming clearer, rename various artifacts to reflect the assumptions made. Therefore as of this patch: - The flag for multipath groups is nh_grp_entry::is_multipath. This includes the legacy and resilient groups, as well as any future group types that behave as multipath groups. Functions that assume this have "mpath" in the name. - The flag for legacy multipath groups is nh_grp_entry::hash_threshold. Functions that assume this have "hthr" in the name. - The flag for resilient groups is nh_grp_entry::resilient. Functions that assume this have "res" in the name. Besides the above, struct nh_grp_entry::mpath was renamed to ::hthr as well. UAPI artifacts were obviously left intact. Suggested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Lu Wei authored
Modify "occured" to "occurred" in net/vmw_vsock/af_vsock.c. Reported-by:
Lu Wei <luwei32@huawei.com> Signed-off-by:
-
Lu Wei authored
Modify "unkown" to "unknown" in net/sctp/sm_make_chunk.c and Modify "orginal" to "original" in net/sctp/socket.c. Reported-by:
-
Lu Wei authored
Modify "beween" to "between" in net/rds/send.c. Reported-by:
-
Colin Ian King authored
The pointer gpio is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== selftest: add tests for packet per second Add self tests for the recently added packet per second rate limiting feature of the TC policer action[1]. The forwarding selftest (patch 2/2) depends on iproute2 support for packet per second rate limiting, which has been posted separately[2] [1] [PATCH v3 net-next 0/3] net/sched: act_police: add support for packet-per-second policing https://lore.kernel.org/netdev/20210312140831.23346-1-simon.horman@netronome.com/ [2] [PATCH iproute2-next] police: add support for packet-per-second rate limiting https://lore.kernel.org/netdev/20210326125018.32091-1-simon.horman@netronome.com/ ==================== Signed-off-by: -
Baowen Zheng authored
Test tc-police action for packets per second. The test is mainly in scenarios Rx policing and Tx policing. The test passes with veth pairs ports. Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Baowen Zheng authored
Add selftest cases in action police for packets per second. These tests depend on corresponding iproute2 command support. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/wouldnt/wouldn\'t/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/sucessful/successful/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/simulataneous/simultaneous/ ....in three dirrent places. s/tempory/temporary/ s/interpeter/interpreter/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/ingoring/ignoring/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/synching/syncing/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/Accouting/Accounting/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/registerd/registered/ Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
