- 06 Aug, 2019 40 commits
-
-
Filipe Manana authored
commit cb2d3dad upstream. When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e05 ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit b4f9a1a8 upstream. When doing an incremental send operation we can fail if we previously did deduplication operations against a file that exists in both snapshots. In that case we will fail the send operation with -EIO and print a message to dmesg/syslog like the following: BTRFS error (device sdc): Send: inconsistent snapshot, found updated \ extent for inode 257 without updated inode item, send root is 258, \ parent root is 257 This requires that we deduplicate to the same file in both snapshots for the same amount of times on each snapshot. The issue happens because a deduplication only updates the iversion of an inode and does not update any other field of the inode, therefore if we deduplicate the file on each snapshot for the same amount of time, the inode will have the same iversion value (stored as the "sequence" field on the inode item) on both snapshots, therefore it will be seen as unchanged between in the send snapshot while there are new/updated/deleted extent items when comparing to the parent snapshot. This makes the send operation return -EIO and print an error message. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our first file. The first half of the file has several 64Kb # extents while the second half as a single 512Kb extent. $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo # Create the base snapshot and the parent send stream from it. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 # Create our second file, that has exactly the same data as the first # file. $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar # Create the second snapshot, used for the incremental send, before # doing the file deduplication. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 # Now before creating the incremental send stream: # # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This # will drop several extent items and add a new one, also updating # the inode's iversion (sequence field in inode item) by 1, but not # any other field of the inode; # # 2) Deduplicate into a different subrange of file foo in snapshot # mysnap2. This will replace an extent item with a new one, also # updating the inode's iversion by 1 but not any other field of the # inode. # # After these two deduplication operations, the inode items, for file # foo, are identical in both snapshots, but we have different extent # items for this inode in both snapshots. We want to check this doesn't # cause send to fail with an error or produce an incorrect stream. $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo # Create the incremental send stream. $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2 ERROR: send ioctl failed with -5: Input/output error This issue started happening back in 2015 when deduplication was updated to not update the inode's ctime and mtime and update only the iversion. Back then we would hit a BUG_ON() in send, but later in 2016 send was updated to return -EIO and print the error message instead of doing the BUG_ON(). A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933 Fixes: 1c919a5e ("btrfs: don't update mtime/ctime on deduped inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Masahiro Yamada authored
commit 5241ab4c upstream. CLANG_FLAGS is initialized by the following line: CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) ..., which is run only when CROSS_COMPILE is set. Some build targets (bindeb-pkg etc.) recurse to the top Makefile. When you build the kernel with Clang but without CROSS_COMPILE, the same compiler flags such as -no-integrated-as are accumulated into CLANG_FLAGS. If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg', Kbuild will recompile everything needlessly due to the build command change. Fix this by correctly initializing CLANG_FLAGS. Fixes: 238bcbc4 ("kbuild: consolidate Clang compiler flags") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
M. Vefa Bicakci authored
commit 0c5b6c28 upstream. Prior to this commit, starting nconfig, xconfig or gconfig, and saving the .config file more than once caused data loss, where a .config file that contained only comments would be written to disk starting from the second save operation. This bug manifests itself because the SYMBOL_WRITTEN flag is never cleared after the first call to conf_write, and subsequent calls to conf_write then skip all of the configuration symbols due to the SYMBOL_WRITTEN flag being set. This commit resolves this issue by clearing the SYMBOL_WRITTEN flag from all symbols before conf_write returns. Fixes: 8e2442a5 ("kconfig: fix missing choice values in auto.conf") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by:
M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by:
-
Yongxin Liu authored
[ Upstream commit 09b90e2f ] In nouveau_conn_reset(), if connector->state is true, __drm_atomic_helper_connector_destroy_state() will be called, but the memory pointed by asyc isn't freed. Memory leak happens in the following function __drm_atomic_helper_connector_reset(), where newly allocated asyc->state will be assigned to connector->state. So using nouveau_conn_atomic_destroy_state() instead of __drm_atomic_helper_connector_destroy_state to free the "old" asyc. Here the is the log showing memory leak. unreferenced object 0xffff8c5480483c80 (size 192): comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s) hex dump (first 32 bytes): 00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0 [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau] [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau] [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau] [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau] [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau] [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau] [<000000007e961c3e>] local_pci_probe+0x47/0xa0 [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30 [<0000000028da4805>] process_one_work+0x27c/0x660 [<000000001d415b04>] worker_thread+0x22b/0x3f0 [<0000000003b69f1f>] kthread+0x12f/0x150 [<00000000c94c29b7>] ret_from_fork+0x3a/0x50 Signed-off-by:
Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhenzhong Duan authored
[ Upstream commit 8c5477e8 ] Kernel build warns: 'sanitize_boot_params' defined but not used [-Wunused-function] at below files: arch/x86/boot/compressed/cmdline.c arch/x86/boot/compressed/error.c arch/x86/boot/compressed/early_serial_console.c arch/x86/boot/compressed/acpi.c That's becausethey each include misc.h which includes a definition of sanitize_boot_params() via bootparam_utils.h. Remove the inclusion from misc.h and have the c file including bootparam_utils.h directly. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 083db676 ] The __raw_callee_save_*() functions have an ELF symbol size of zero, which confuses objtool and other tools. Fixes a bunch of warnings like the following: arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 3901336e ] After making a change to improve objtool's sibling call detection, it started showing the following warning: arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame The problem is the ____kvm_handle_fault_on_reboot() macro. It does a fake call by pushing a fake RIP and doing a jump. That tricks the unwinder into printing the function which triggered the exception, rather than the .fixup code. Instead of the hack to make it look like the original function made the call, just change the macro so that the original function actually does make the call. This allows removal of the hack, and also makes objtool happy. I triggered a vmx instruction exception and verified that the stack trace is still sane: kernel BUG at arch/x86/kvm/x86.c:358! invalid opcode: 0000 [#1] SMP PTI CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16 Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017 RIP: 0010:kvm_spurious_fault+0x5/0x10 Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246 RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000 RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000 R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0 R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000 FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: loaded_vmcs_init+0x4f/0xe0 alloc_loaded_vmcs+0x38/0xd0 vmx_create_vcpu+0xf7/0x600 kvm_vm_ioctl+0x5e9/0x980 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? free_one_page+0x13f/0x4e0 do_vfs_ioctl+0xa4/0x630 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa349b1ee5b Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Zhenzhong Duan authored
[ Upstream commit b23e5844 ] Commit 7457c0da ("x86/alternatives: Add int3_emulate_call() selftest") is used to ensure there is a gap setup in int3 exception stack which could be used for inserting call return address. This gap is missed in XEN PV int3 exception entry path, then below panic triggered: [ 0.772876] general protection fault: 0000 [#1] SMP NOPTI [ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11 [ 0.772893] RIP: e030:int3_magic+0x0/0x7 [ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246 [ 0.773334] Call Trace: [ 0.773334] alternative_instructions+0x3d/0x12e [ 0.773334] check_bugs+0x7c9/0x887 [ 0.773334] ? __get_locked_pte+0x178/0x1f0 [ 0.773334] start_kernel+0x4ff/0x535 [ 0.773334] ? set_init_arg+0x55/0x55 [ 0.773334] xen_start_kernel+0x571/0x57a For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with %rcx/%r11 on the stack. To convert back to "normal" looking exceptions, the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'. E.g. Extracting 'xen_pv_trap xenint3' we have: xen_xenint3: pop %rcx; pop %r11; jmp xenint3 As xenint3 and int3 entry code are same except xenint3 doesn't generate a gap, we can fix it by using int3 and drop useless xenint3. Signed-off-by:
-
Petr Machata authored
[ Upstream commit dedfde2f ] Spectrum systems use DSCP rewrite map to update DSCP field in egressing packets to correspond to priority that the packet has. Whether rewriting will take place is determined at the point when the packet ingresses the switch: if the port is in Trust L3 mode, packet priority is determined from the DSCP map at the port, and DSCP rewrite will happen. If the port is in Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP rewrite will happen. The driver determines the port trust mode based on whether any DSCP prioritization rules are in effect at given port. If there are any, trust level is L3, otherwise it's L2. When the last DSCP rule is removed, the port is switched to trust L2. Under that scenario, if DSCP of a packet should be rewritten, it should be rewritten to 0. However, when switching to Trust L2, the driver neglects to also update the DSCP rewrite map. The last DSCP rule thus remains in effect, and packets egressing through this port, if they have the right priority, will have their DSCP set according to this rule. Fix by first configuring the rewrite map, and only then switching to trust L2 and bailing out. Fixes: b2b1dab6 ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reported-by:
Alex Veber <alexve@mellanox.com> Tested-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kees Cook authored
[ Upstream commit a318f12e ] Andreas Christoforou reported: UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow: 9 * 2305843009213693951 cannot be represented in type 'long int' ... Call Trace: mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414 evict+0x472/0x8c0 fs/inode.c:558 iput_final fs/inode.c:1547 [inline] iput+0x51d/0x8c0 fs/inode.c:1573 mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320 mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459 vfs_mkobj+0x39e/0x580 fs/namei.c:2892 prepare_open ipc/mqueue.c:731 [inline] do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771 Which could be triggered by: struct mq_attr attr = { .mq_flags = 0, .mq_maxmsg = 9, .mq_msgsize = 0x1fffffffffffffff, .mq_curmsgs = 0, }; if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1) perror("mq_open"); mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and preparing to return -EINVAL. During the cleanup, it calls mqueue_evict_inode() which performed resource usage tracking math for updating "user", before checking if there was a valid "user" at all (which would indicate that the calculations would be sane). Instead, delay this check to after seeing a valid "user". The overflow was real, but the results went unused, so while the flaw is harmless, it's noisy for kernel fuzzers, so just fix it by moving the calculation under the non-NULL "user" where it actually gets used. Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Andreas Christoforou <andreaschristofo@gmail.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 156e0b1a ] The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1 characters. But the problem here is that we don't ensure that the user put a NUL terminator on the end of the string. It could lead to an out of bounds read. Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda Fixes: e8de3701 ("rapidio: add mport char device driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alexandre Bounine <alex.bou9@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Mikko Rapeli authored
[ Upstream commit f90fb3c7 ] Only users of upc_req in kernel side fs/coda/psdev.c and fs/coda/upcall.c already include linux/coda_psdev.h. Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/ Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace: linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type struct list_head uc_chain; ^ linux/coda_psdev.h:13:2: error: unknown type name `caddr_t' caddr_t uc_data; ^ linux/coda_psdev.h:14:2: error: unknown type name `u_short' u_short uc_flags; ^ linux/coda_psdev.h:15:2: error: unknown type name `u_short' u_short uc_inSize; /* Size is at most 5000 bytes */ ^ linux/coda_psdev.h:16:2: error: unknown type name `u_short' u_short uc_outSize; ^ linux/coda_psdev.h:17:2: error: unknown type name `u_short' u_short uc_opcode; /* copied from data to save lookup */ ^ linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t' wait_queue_head_t uc_sleep; /* process' wait queue */ ^ Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Sam Protsenko authored
[ Upstream commit b2a57e33 ] The kernel is self-contained project and can be built with bare-metal toolchain. But bare-metal toolchain doesn't define __linux__. Because of this u_quad_t type is not defined when using bare-metal toolchain and codafs build fails. This patch fixes it by defining u_quad_t type unconditionally. Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 02551c23 ] When fget fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling fget. Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 33d6e0ff ] If a memsetXX implementation is completely broken and fails in the first iteration, when i, j, and k are all zero, the failure is masked as zero is returned. Failing in the first iteration is perhaps the most likely failure, so this makes the tests pretty much useless. Avoid the situation by always setting a random unused bit in the result on failure. Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se Fixes: 03270c13 ("lib/string.c: add testcases for memset16/32/64") Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 8e060c21 ] This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to avoid tainting the kernel. Additionally fixes up the math on wrap size to be architecture and page size agnostic. Link: http://lkml.kernel.org/r/201905282012.0A8767E24@keescook Fixes: ca90800a ("test_overflow: Add memory allocation overflow tests") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit c633324e ] The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2 ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 29e7e966 ] clang warns about a few parts of the math-emu implementation where a 16-bit integer becomes negative during assignment: arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion] (0x41 + EXTENDED_Ebias) | SIGN_Negative); ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16' #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } ~ ^ arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion] FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, ^~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion] FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ The code is correct as is, so add a typecast to shut up the warnings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Qian Cai authored
[ Upstream commit ec633558 ] There are many compiler warnings like this, In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~ APIC_QUIET is 0, so silence them by making apic_verbosity type int. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 7429c6c0 ] While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit dfd6f9ad ] clang gets confused by an uninitialized variable in what looks to it like a never executed code path: arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized] polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; ^~~~~~~~ arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning int rc, irq, trigger, polarity; ^ = 0 arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized] trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; ^~~~~~~ arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning int rc, irq, trigger, polarity; ^ = 0 This is unfortunately a design decision in clang and won't be fixed. Changing the acpi_get_override_irq() macro to an inline function reliably avoids the issue. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit a6a6d3b1 ] clang finds a contruct suspicious that converts an unsigned character to a signed integer and back, causing an overflow: arch/x86/kvm/mmu.c:4605:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -205 to 51 [-Werror,-Wconstant-conversion] u8 wf = (pfec & PFERR_WRITE_MASK) ? ~w : 0; ~~ ^~ arch/x86/kvm/mmu.c:4607:38: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -241 to 15 [-Werror,-Wconstant-conversion] u8 uf = (pfec & PFERR_USER_MASK) ? ~u : 0; ~~ ^~ arch/x86/kvm/mmu.c:4609:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -171 to 85 [-Werror,-Wconstant-conversion] u8 ff = (pfec & PFERR_FETCH_MASK) ? ~x : 0; ~~ ^~ Add an explicit cast to tell clang that everything works as intended here. Signed-off-by:
-
Ravi Bangoria authored
[ Upstream commit 916c31ff ] 'perf version' on powerpc segfaults when used with non-supported option: # perf version -a Segmentation fault (core dumped) Fix this. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Tested-by:
Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190611030109.20228-1-ravi.bangoria@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Benjamin Block authored
[ Upstream commit 48464708 ] GCC v9 emits this warning: CC drivers/s390/scsi/zfcp_erp.o drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue': drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized] 217 | struct zfcp_erp_action *erp_action; | ^~~~~~~~~~ This is a possible false positive case, as also documented in the GCC documentations: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized The actual code-sequence is like this: Various callers can invoke the function below with the argument "want" being one of: ZFCP_ERP_ACTION_REOPEN_ADAPTER, ZFCP_ERP_ACTION_REOPEN_PORT_FORCED, ZFCP_ERP_ACTION_REOPEN_PORT, or ZFCP_ERP_ACTION_REOPEN_LUN. zfcp_erp_action_enqueue(want, ...) ... need = zfcp_erp_required_act(want, ...) need = want ... maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER ... return need ... zfcp_erp_setup_act(need, ...) struct zfcp_erp_action *erp_action; // <== line 217 ... switch(need) { case ZFCP_ERP_ACTION_REOPEN_LUN: ... erp_action = &zfcp_sdev->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_PORT: case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: ... erp_action = &port->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: ... erp_action = &adapter->erp_action; WARN_ON_ONCE(erp_action->port != NULL); // <== access ... break; } ... WARN_ON_ONCE(erp_action->adapter != adapter); // <== access When zfcp_erp_setup_act() is called, 'need' will never be anything else than one of the 4 possible enumeration-names that are used in the switch-case, and 'erp_action' is initialized for every one of them, before it is used. Thus the warning is a false positive, as documented. We introduce the extra if{} in the beginning to create an extra code-flow, so the compiler can be convinced that the switch-case will never see any other value. BUG_ON()/BUG() is intentionally not used to not crash anything, should this ever happen anyway - right now it's impossible, as argued above; and it doesn't introduce a 'default:' switch-case to retain warnings should 'enum zfcp_erp_act_type' ever be extended and no explicit case be introduced. See also v5.0 commit 399b6c8b ("scsi: zfcp: drop old default switch case which might paper over missing case"). Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit b80d6a42 ] When CONFIG_DMI is disabled, we only have a tentative declaration, which causes a warning from clang: drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror] static const struct dmi_system_id acpi_rev_dmi_table[] __initconst; As the variable is not actually used here, hide it entirely in an #ifdef to shut up the warning. Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 3b421018 ] The getxattr manpage states that we should return ERANGE if the destination buffer size is too small to hold the value. ceph_vxattrcb_layout does this internally, but we should be doing this for all vxattrs. Fix the only caller of getxattr_cb to check the returned size against the buffer length and return -ERANGE if it doesn't fit. Drop the same check in ceph_vxattrcb_layout and just rely on the caller to handle it. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Acked-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Andrea Parri authored
[ Upstream commit 74960773 ] This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic64_set() primitive. Replace the barrier with an smp_mb(). Fixes: fdd4e158 ("ceph: rework dcache readdir") Reported-by:
"Paul E. McKenney" <paulmck@linux.ibm.com> Reported-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by:
-
Ronnie Sahlberg authored
[ Upstream commit f2caf901 ] There is a race condition with how we send (or supress and don't send) smb echos that will cause the client to incorrectly think the server is unresponsive and thus needs to be reconnected. Summary of the race condition: 1) Daisy chaining scheduling creates a gap. 2) If traffic comes unfortunate shortly after the last echo, the planned echo is suppressed. 3) Due to the gap, the next echo transmission is delayed until after the timeout, which is set hard to twice the echo interval. This is fixed by changing the timeouts from 2 to three times the echo interval. Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remountSigned-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit e88439de ] [BUG] Lockdep will report the following circular locking dependency: WARNING: possible circular locking dependency detected 5.2.0-rc2-custom #24 Tainted: G O ------------------------------------------------------ btrfs/8631 is trying to acquire lock: 000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs] but task is already holding lock: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->tree_log_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x475/0xa00 [btrfs] btrfs_commit_super+0x71/0x80 [btrfs] close_ctree+0x2bd/0x320 [btrfs] btrfs_put_super+0x15/0x20 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x16/0xa0 [btrfs] deactivate_locked_super+0x3a/0x80 deactivate_super+0x51/0x60 cleanup_mnt+0x3f/0x80 __cleanup_mnt+0x12/0x20 task_work_run+0x94/0xb0 exit_to_usermode_loop+0xd8/0xe0 do_syscall_64+0x210/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&fs_info->reloc_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x40d/0xa00 [btrfs] btrfs_quota_enable+0x2da/0x730 [btrfs] btrfs_ioctl+0x2691/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}: lock_acquire+0xa7/0x190 __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_qgroup_inherit+0x40/0x620 [btrfs] create_pending_snapshot+0x9d7/0xe60 [btrfs] create_pending_snapshots+0x94/0xb0 [btrfs] btrfs_commit_transaction+0x415/0xa00 [btrfs] btrfs_mksubvol+0x496/0x4e0 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0xa90/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->tree_log_mutex); lock(&fs_info->reloc_mutex); lock(&fs_info->tree_log_mutex); lock(&fs_info->qgroup_ioctl_lock#2); *** DEADLOCK *** 6 locks held by btrfs/8631: #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60 #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs] #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs] #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs] #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs] #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] [CAUSE] Due to the delayed subvolume creation, we need to call btrfs_qgroup_inherit() inside commit transaction code, with a lot of other mutex hold. This hell of lock chain can lead to above problem. [FIX] On the other hand, we don't really need to hold qgroup_ioctl_lock if we're in the context of create_pending_snapshot(). As in that context, we're the only one being able to modify qgroup. All other qgroup functions which needs qgroup_ioctl_lock are either holding a transaction handle, or will start a new transaction: Functions will start a new transaction(): * btrfs_quota_enable() * btrfs_quota_disable() Functions hold a transaction handler: * btrfs_add_qgroup_relation() * btrfs_del_qgroup_relation() * btrfs_create_qgroup() * btrfs_remove_qgroup() * btrfs_limit_qgroup() * btrfs_qgroup_inherit() call inside create_subvol() So we have a higher level protection provided by transaction, thus we don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit(). Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in create_pending_snapshot() is already protected by transaction. So the fix is to detect the context by checking trans->transaction->state. If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction context and no need to get the mutex. Reported-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
David Sterba authored
[ Upstream commit 0ee5f8ae ] The list of profiles in btrfs_chunk_max_errors lists DUP as a profile DUP able to tolerate 1 device missing. Though this profile is special with 2 copies, it still needs the device, unlike the others. Looking at the history of changes, thre's no clear reason why DUP is there, functions were refactored and blocks of code merged to one helper. d20983b4 Btrfs: fix writing data into the seed filesystem - factor code to a helper de11cc12 Btrfs: don't pre-allocate btrfs bio - unrelated change, DUP still in the list with max errors 1 a236aed1 Btrfs: Deal with failed writes in mirrored configurations - introduced the max errors, leaves DUP and RAID1 in the same group Reviewed-by:
-
Chunyan Zhang authored
[ Upstream commit c974c48d ] sprd_clk_regmap_init() doesn't always return success, adding check for its return value should make the code more strong. Signed-off-by:
Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by:
Baolin Wang <baolin.wang@linaro.org> [sboyd@kernel.org: Add a missing int ret] Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Russell King authored
[ Upstream commit 5808b14a ] Fix a use-after-free bug during filesystem initialisation, where we access the disc record (which is stored in a buffer) after we have released the buffer. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
JC Kuo authored
[ Upstream commit 0d34dfbf ] Full-speed and low-speed USB devices do not work with Tegra210 platforms because of incorrect PLLU/PLLU_OUT1 clock settings. When full-speed device is connected: [ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 14.196295] usb 1-3: device descriptor read/64, error -71 [ 14.436311] usb 1-3: device descriptor read/64, error -71 [ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 14.812335] usb 1-3: device descriptor read/64, error -71 [ 15.052316] usb 1-3: device descriptor read/64, error -71 [ 15.164799] usb usb1-port3: attempt power cycle When low-speed device is connected: [ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.564977] usb usb1-port3: attempt power cycle This commit fixes the issue by: 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock because PLLU_OUT1 is parent of XUSB_FS_SRC. 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical Reference Manual. Fixes: e745f992 ("clk: tegra: Rework pll_u") Signed-off-by:
JC Kuo <jckuo@nvidia.com> Acked-By:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 78efb76a ] While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Analyzed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Petr Cvek authored
[ Upstream commit ba1bc0fc ] The modification of EXIN register doesn't clean the bitfield before the writing of a new value. After a few modifications the bitfield would accumulate only '1's. Signed-off-by:
Petr Cvek <petrcvekcz@gmail.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: hauke@hauke-m.de Cc: john@phrozen.org Cc: linux-mips@vger.kernel.org Cc: openwrt-devel@lists.openwrt.org Cc: pakahmar@hotmail.com Signed-off-by:
-
Jean-Philippe Brucker authored
[ Upstream commit 92e074ac ] Since commit 85f1abe0 ("kthread, sched/wait: Fix kthread_parkme() completion issue"), kthreads that are bound to a CPU must be parked before being stopped. At the moment the PSCI checker calls kthread_stop() directly on the suspend kthread, which triggers the following warning: [ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78 ... [ 6.190151] Call trace: [ 6.192566] __kthread_bind_mask+0x20/0x78 [ 6.196615] kthread_unpark+0x74/0x80 [ 6.200235] kthread_stop+0x44/0x1d8 [ 6.203769] psci_checker+0x3bc/0x484 [ 6.207389] do_one_initcall+0x48/0x260 [ 6.211180] kernel_init_freeable+0x2c8/0x368 [ 6.215488] kernel_init+0x10/0x100 [ 6.218935] ret_from_fork+0x10/0x1c [ 6.222467] ---[ end trace e05e22863d043cd3 ]--- kthread_unpark() tries to bind the thread to its CPU and aborts with a WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads before stopping them. Fixes: 85f1abe0 ("kthread, sched/wait: Fix kthread_parkme() completion issue") Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit 6e6de3de ] Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and linux guests boot with repeated errors: amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) The warnings occur because the module code erroneously returns -EEXIST for modules that have failed to load and are in the process of being removed from the module list. module amd64_edac_mod has a dependency on module edac_mce_amd. Using modules.dep, systemd will load edac_mce_amd for every request of amd64_edac_mod. When the edac_mce_amd module loads, the module has state MODULE_STATE_UNFORMED and once the module load fails and the state becomes MODULE_STATE_GOING. Another request for edac_mce_amd module executes and add_unformed_module() will erroneously return -EEXIST even though the previous instance of edac_mce_amd has MODULE_STATE_GOING. Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which fails because of unknown symbols from edac_mce_amd. add_unformed_module() must wait to return for any case other than MODULE_STATE_LIVE to prevent a race between multiple loads of dependent modules. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Barret Rhoden <brho@google.com> Cc: David Arcari <darcari@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
-
Helen Koike authored
[ Upstream commit c432a29d ] isp iommu requires wrapper variants of the clocks. noc variants are always on and using the wrapper variants will activate {A,H}CLK_ISP{0,1} due to the hierarchy. Tested using the pending isp patch set (which is not upstream yet). Without this patch, streaming from the isp stalls. Also add the respective power domain and remove the "disabled" status. Refer: RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition Signed-off-by:
Helen Koike <helen.koike@collabora.com> Tested-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit dc161064 ] Apparently driver was never tested with DMA_PREP_INTERRUPT flag being unset since it completely disables interrupt handling instead of skipping the callbacks invocations, hence putting channel into unusable state. The flag is always set by all of kernel drivers that use APB DMA, so let's error out in otherwise case for consistency. It won't be difficult to support that case properly if ever will be needed. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
