- 07 Mar, 2016 17 commits
-
-
Sebastian Andrzej Siewior authored
commit 4ae2182b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Larry Finger authored
commit c72fc909 upstream. Recently, it has been reported that D-Link DWA-582 cards, which use an RTL8812AE chip are not able to scan for 5G networks. The problems started with kernel 4.2, which is the first version that had commit d10101a6 ("rtlwifi: rtl8821ae: Fix problem with regulatory information"). With this patch, the driver went from setting a default channel plan to using the value derived from EEPROM. Bug reports at https://bugzilla.kernel.org/show_bug.cgi?id=111031 and https://bugzilla.redhat.com/show_bug.cgi?id=1279653 are examples of this problem. The problem was solved once I learned that the internal country code was resulting in a regulatory set with only 2.4 GHz channels. With the RTL8821AE chips available to me, the country code was such that both 2.4 and 5 GHz channels are allowed. The fix is to allow both bands even when the EEPROM is incorrectly encoded. Fixes: d10101a6 ("rtlwifi: rtl8821ae: Fix problem with regulatory information") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: littlesmartguy@gmail.com Cc: gabe@codehaus.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit 4da597d1 upstream. We don't want to write to .text so let's move ppa_zero_params and ppa_por_params to .data and access them via pointers. Note that I have not been able to test as we I don't have a HS omap4 to test with. The code has been changed in similar way as for omap3 though. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit 0a0b1327 upstream. We don't want to write to .text, so let's move l2_inv_api_params to .data and access it via a pointer. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit a5311d4d upstream. We don't want to write to .text and we can move save_secure_ram_context into .data as it all gets copied into SRAM anyways. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit eeaf9646 upstream. We don't want to write to .text section. Let's move l2dis_3630 to .data and access it via a pointer. For calculating the offset, let's optimize out the add and do it in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit d9db5910 upstream. We don't want to be writing to .text so it can be set rodata. Fix error "Unable to handle kernel paging request at virtual address c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected. As these counters are for debugging only and unused, we can just remove them. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tejun Heo authored
commit aa226ff4 upstream. There are three subsystem callbacks in css shutdown path - css_offline(), css_released() and css_free(). Except for css_released(), cgroup core didn't guarantee the order of invocation. css_offline() or css_free() could be called on a parent css before its children. This behavior is unexpected and led to bugs in cpu and memory controller. This patch updates offline path so that a parent css is never offlined before its children. Each css keeps online_cnt which reaches zero iff itself and all its children are offline and offline_css() is invoked only after online_cnt reaches zero. This fixes the memory controller bug and allows the fix for cpu controller. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reported-by: Brian Christiansen <brian.o.christiansen@gmail.com> Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Vineet Gupta authored
commit cbfe74a7 upstream. Returning to delay slot, riding an interrupti, had one loose end. AUX_USER_SP used for restoring user mode SP upon RTIE was not being setup from orig task's saved value, causing task to use wrong SP, leading to ProtV errors. The reason being: - INTERRUPT_EPILOGUE returns to a kernel trampoline, thus not expected to restore it - EXCEPTION_EPILOGUE is not used at all Fix that by restoring AUX_USER_SP explicitly in the trampoline. This was broken in the original workaround, but the error scenarios got reduced considerably since v3.14 due to following: 1. The Linuxthreads.old based userspace at the time caused many more exceptions in delay slot than the current NPTL based one. Infact with current userspace the error doesn't happen at all. 2. Return from interrupt (delay slot or otherwise) doesn't get exercised much after commit 4de0e528 ("Really Re-enable interrupts to avoid deadlocks") since IRQ_ACTIVE.active being clear means most returns are as if from pure kernel (even for active interrupts) Infact the issue only happened in an experimental branch where I was tinkering with reverted 4de0e528 Fixes: 4255b07f ("ARCv2: STAR 9000793984: Handle return from intr to Delay Slot") Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Bard Liao authored
commit b28785fa upstream. The shift bit of IN1 boost gain control is 12. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jonathan Cameron authored
commit 9d0be85d upstream. Whilst this part has a hardware buffer, the identifcation that IIO cares about is the userspace facing end. It this case we push individual elements from the hardware fifo into the software interface (specifically a kfifo) rather than providing direct reads through to a hardware buffer (as we still do in the sca3000 for example). Technically the original specification as a hardware buffer could be considered wrong, but it didn't matter until the patch listed below. Result is that any attempt to enable the buffer will return -EINVAL Fixes: 225d59ad ("iio: Specify supported modes for buffers") Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Gabriele Mazzotta authored
commit fa34e6dd upstream. As per the ACPI specification (Revision 5.0) [1], the data coming from the sensor represent the ambient light illuminance reading expressed in lux. So use IIO_CHAN_INFO_PROCESSED to signify that the data are pre-processed. However, to keep backward ABI compatibility, the IIO_CHAN_INFO_RAW bit is not removed. [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf This issue has also been responsible for at least one userspace bug report hence marking what is a small semantic fix really for stable. [2] https://github.com/hadess/iio-sensor-proxy/issues/46Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
CQ Tang authored
commit fda3bec1 upstream. This is a 32-bit register. Apparently harmless on real hardware, but causing justified warnings in simulation. Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Yong Li authored
commit 97a249e9 upstream. Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by: Yong Li <sdliyong@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Vegard Nossum authored
commit 005ce071 upstream. Ran into this on UML: drivers/built-in.o: In function `vf610_adc_probe': drivers/iio/adc/vf610_adc.c:744: undefined reference to `devm_ioremap_resource' devm_ioremap_resource() is defined only when HAS_IOMEM is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Vegard Nossum authored
commit 01cc5235 upstream. Ran into this on UML: drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’: drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration] iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Markus Elfring authored
commit c08ae185 upstream. The return type "unsigned int" was used by the ltr501_match_samp_freq() function despite of the aspect that it will eventually return a negative error code. Improve this implementation detail by deletion of the type modifier then. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 04 Mar, 2016 1 commit
-
-
Andy Lutomirski authored
commit 3d44d51b upstream. This doesn't seem to fix a regression -- I don't think the CLAC was ever there. I double-checked in a debugger: entries through the int80 gate do not automatically clear AC. Stable maintainers: I can provide a backport to 4.3 and earlier if needed. This needs to be backported all the way to 3.10. Reported-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63bcff2a ("x86, smap: Add STAC and CLAC instructions to control user space access") Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 02 Mar, 2016 1 commit
-
-
Haozhong Zhang authored
commit 81b1b9ca upstream. The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Backported-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 25 Feb, 2016 1 commit
-
-
Thomas Hellstrom authored
commit 12617971 upstream. A regression introduced when the master ttm lock was split into two. Reported-and-tested-by: Brian Paul <brianp@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 23 Feb, 2016 5 commits
-
-
Tejun Heo authored
commit 041bd12e upstream. This reverts commit 874bbfe6. Workqueue used to implicity guarantee that work items queued without explicit CPU specified are put on the local CPU. Recent changes in timer broke the guarantee and led to vmstat breakage which was fixed by 176bed1d ("vmstat: explicitly schedule per-cpu work on the CPU we need it to run on"). vmstat is the most likely to expose the issue and it's quite possible that there are other similar problems which are a lot more difficult to trigger. As a preventive measure, 874bbfe6 ("workqueue: make sure delayed work run in local cpu") was applied to restore the local CPU guarnatee. Unfortunately, the change exposed a bug in timer code which got fixed by 22b886dd ("timers: Use proper base migration in add_timer_on()"). Due to code restructuring, the commit couldn't be backported beyond certain point and stable kernels which only had 874bbfe6 started crashing. The local CPU guarantee was accidental more than anything else and we want to get rid of it anyway. As, with the vmstat case fixed, 874bbfe6 is causing more problems than it's fixing, it has been decided to take the chance and officially break the guarantee by reverting the commit. A debug feature will be added to force foreign CPU assignment to expose cases relying on the guarantee and fixes for the individual cases will be backported to stable as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 874bbfe6 ("workqueue: make sure delayed work run in local cpu") Link: http://lkml.kernel.org/g/20160120211926.GJ10810@quack.suse.cz Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Daniel Bilik <daniel.bilik@neosystem.cz> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shli@fb.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Bilik <daniel.bilik@neosystem.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Linus Torvalds authored
commit 176bed1d upstream. The vmstat code uses "schedule_delayed_work_on()" to do the initial startup of the delayed work on the right CPU, but then once it was started it would use the non-cpu-specific "schedule_delayed_work()" to re-schedule it on that CPU. That just happened to schedule it on the same CPU historically (well, in almost all situations), but the code _requires_ this work to be per-cpu, and should say so explicitly rather than depend on the non-cpu-specific scheduling to schedule on the current CPU. The timer code is being changed to not be as single-minded in always running things on the calling CPU. See also commit 874bbfe6 ("workqueue: make sure delayed work run in local cpu") that for now maintains the local CPU guarantees just in case there are other broken users that depended on the accidental behavior. Cc: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ kamal: backport to 3.19-stable: use queue_delayed_work_on() ] Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Andrey Konovalov authored
commit 07d86ca9 upstream. The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Ryan Ware authored
commit 613317bd upstream. This patch fixes vulnerability CVE-2016-2085. The problem exists because the vm_verify_hmac() function includes a use of memcmp(). Unfortunately, this allows timing side channel attacks; specifically a MAC forgery complexity drop from 2^128 to 2^12. This patch changes the memcmp() to the cryptographically safe crypto_memneq(). Reported-by: Xiaofei Rex Guo <xiaofei.rex.guo@intel.com> Signed-off-by: Ryan Ware <ware@linux.intel.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Hariprasad S authored
commit 67f1aee6 upstream. The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 11 Feb, 2016 1 commit
-
-
Kamal Mostafa authored
This reverts commit 504017f7. Breaks ppc64 builds on hosts which don't include the kmod patch: "depmod: Ignore PowerPC64 ABIv2 .TOC. symbol" Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 10 Feb, 2016 1 commit
-
-
Ursula Braun authored
commit e5ebe632 upstream. /sys/class/net/<interface>/operstate for an active qeth network interface offen shows "unknown", which translates to "state UNKNOWN in output of "ip link show". It is caused by a missing initialization of the __LINK_STATE_NOCARRIER bit in the net_device state field. This patch adds a netif_carrier_off() invocation when creating the net_device for a qeth device. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reference-ID: Bugzilla 133209 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 09 Feb, 2016 6 commits
-
-
Yevgeny Pats authored
commit 23567fd0 upstream. This fixes CVE-2016-0728. If a thread is asked to join as a session keyring the keyring that's already set as its session, we leak a keyring reference. This can be tested with the following program: #include <stddef.h> #include <stdio.h> #include <sys/types.h> #include <keyutils.h> int main(int argc, const char *argv[]) { int i = 0; key_serial_t serial; serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING, "leaked-keyring"); if (serial < 0) { perror("keyctl"); return -1; } if (keyctl(KEYCTL_SETPERM, serial, KEY_POS_ALL | KEY_USR_ALL) < 0) { perror("keyctl"); return -1; } for (i = 0; i < 100; i++) { serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING, "leaked-keyring"); if (serial < 0) { perror("keyctl"); return -1; } } return 0; } If, after the program has run, there something like the following line in /proc/keys: 3f3d898f I--Q--- 100 perm 3f3f0000 0 0 keyring leaked-keyring: empty with a usage count of 100 * the number of times the program has been run, then the kernel is malfunctioning. If leaked-keyring has zero usages or has been garbage collected, then the problem is fixed. Reported-by: Yevgeny Pats <yevgeny@perception-point.io> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
David Howells authored
commit 0d62e9dd upstream. If the ASN.1 decoder is asked to parse a sequence of objects, non-optional matches get skipped if there's no more data to be had rather than a data-overrun error being reported. This is due to the code segment that decides whether to skip optional matches (ie. matches that could get ignored because an element is marked OPTIONAL in the grammar) due to a lack of data also skips non-optional elements if the data pointer has reached the end of the buffer. This can be tested with the data decoder for the new RSA akcipher algorithm that takes three non-optional integers. Currently, it skips the last integer if there is insufficient data. Without the fix, #defining DEBUG in asn1_decoder.c will show something like: next_op: pc=0/13 dp=0/270 C=0 J=0 - match? 30 30 00 - TAG: 30 266 CONS next_op: pc=2/13 dp=4/270 C=1 J=0 - match? 02 02 00 - TAG: 02 257 - LEAF: 257 next_op: pc=5/13 dp=265/270 C=1 J=0 - match? 02 02 00 - TAG: 02 3 - LEAF: 3 next_op: pc=8/13 dp=270/270 C=1 J=0 next_op: pc=11/13 dp=270/270 C=1 J=0 - end cons t=4 dp=270 l=270/270 The next_op line for pc=8/13 should be followed by a match line. This is not exploitable for X.509 certificates by means of shortening the message and fixing up the ASN.1 CONS tags because: (1) The relevant records being built up are cleared before use. (2) If the message is shortened sufficiently to remove the public key, the ASN.1 parse of the RSA key will fail quickly due to a lack of data. (3) Extracted signature data is either turned into MPIs (which cope with a 0 length) or is simpler integers specifying algoritms and suchlike (which can validly be 0); and (4) The AKID and SKID extensions are optional and their removal is handled without risking passing a NULL to asymmetric_key_generate_id(). (5) If the certificate is truncated sufficiently to remove the subject, issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons stack underflow' return. This is not exploitable for PKCS#7 messages by means of removal of elements from such a message from the tail end of a sequence: (1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable as detailed above. (2) The message digest content isn't used if it shows a NULL pointer, similarly, the authattrs aren't used if that shows a NULL pointer. (3) A missing signature results in a NULL MPI - which the MPI routines deal with. (4) If data is NULL, it is expected that the message has detached content and that is handled appropriately. (5) If the serialNumber is excised, the unconditional action associated with it will pick up the containing SEQUENCE instead, so no NULL pointer will be seen here. If both the issuer and the serialNumber are excised, the ASN.1 decode will fail with an 'Unexpected tag' return. In either case, there's no way to get to asymmetric_key_generate_id() with a NULL pointer. (6) Other fields are decoded to simple integers. Shortening the message to omit an algorithm ID field will cause checks on this to fail early in the verification process. This can also be tested by snipping objects off of the end of the ASN.1 stream such that mandatory tags are removed - or even from the end of internal SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be produced. Without this patch ERANGE or ENOPKG might be produced or the parse may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced later, depending on what gets snipped. Just snipping off the final BIT_STRING or OCTET_STRING from either sample should be a start since both are mandatory and neither will cause an EBADMSG without the patches Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Vladis Dronov authored
commit fa52bd50 upstream. The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Oliver Neukum authored
commit 588afcc1 upstream. This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
David Vrabel authored
commit 98dd166e upstream. With commit 633d6f17 (x86/xen: prepare p2m list for memory hotplug) the P2M may be sized to accomdate a much larger amount of memory than the domain currently has. When saving a domain, the toolstack must scan all the P2M looking for populated pages. This results in a performance regression due to the unnecessary scanning. Instead of reporting (via shared_info) the maximum possible size of the P2M, hint at the last PFN which might be populated. This hint is increased as new leaves are added to the P2M (in the expectation that they will be used for populated entries). Signed-off-by: David Vrabel <david.vrabel@citrix.com> [ tim.gardner: backport to 4.2-stable ] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Kamal Mostafa authored
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 04 Feb, 2016 7 commits
-
-
Madhavan Srinivasan authored
commit 370f06c8 upstream. Commit 7a786832 ("powerpc/perf: Add an explict flag indicating presence of SLOT field") introduced the PPMU_HAS_SSLOT flag to remove the assumption that MMCRA[SLOT] was present when PPMU_ALT_SIPR was not set. That commit's changelog also mentions that Power8 does not support MMCRA[SLOT]. However when the Power8 PMU support was merged, it errnoeously included the PPMU_HAS_SSLOT flag. So remove PPMU_HAS_SSLOT from the Power8 flags. mpe: On systems where MMCRA[SLOT] exists, the field occupies bits 37:39 (IBM numbering). On Power8 bit 37 is reserved, and 38:39 overlap with the high bits of the Threshold Event Counter Mantissa. I am not aware of any published events which use the threshold counting mechanism, which would cause the mantissa bits to be set. So in practice this bug is unlikely to trigger. Fixes: e05b9b9e ("powerpc/perf: Power8 PMU support") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jiri Olsa authored
commit 0805909f upstream. Set correct width for unresolved mem_dcacheline addr. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 9b32ba71 ("perf tools: Add dcacheline sort") Link: http://lkml.kernel.org/r/1453290995-18485-3-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Markus Trippelsdorf authored
commit d4913cbd upstream. The issue was pointed out by gcc-6's -Wmisleading-indentation. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: c97cf422 ("perf top: Live TUI Annotation") Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Mika Westerberg authored
commit 6c55d9b9 upstream. Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Matt Fleming authored
commit 74256377 upstream. There are a couple of nasty truncation bugs lurking in the pageattr code that can be triggered when mapping EFI regions, e.g. when we pass a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting left by PAGE_SHIFT will truncate the resultant address to 32-bits. Viorel-Cătălin managed to trigger this bug on his Dell machine that provides a ~5GB EFI region which requires 1236992 pages to be mapped. When calling populate_pud() the end of the region gets calculated incorrectly in the following buggy expression, end = start + (cpa->numpages << PAGE_SHIFT); And only 188416 pages are mapped. Next, populate_pud() gets invoked for a second time because of the loop in __change_page_attr_set_clr(), only this time no pages get mapped because shifting the remaining number of pages (1048576) by PAGE_SHIFT is zero. At which point the loop in __change_page_attr_set_clr() spins forever because we fail to map progress. Hitting this bug depends very much on the virtual address we pick to map the large region at and how many pages we map on the initial run through the loop. This explains why this issue was only recently hit with the introduction of commit a5caa209 ("x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down") It's interesting to note that safe uses of cpa->numpages do exist in the pageattr code. If instead of shifting ->numpages we multiply by PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and so the result is unsigned long. To avoid surprises when users try to convert very large cpa->numpages values to addresses, change the data type from 'int' to 'unsigned long', thereby making it suitable for shifting by PAGE_SHIFT without any type casting. The alternative would be to make liberal use of casting, but that is far more likely to cause problems in the future when someone adds more code and fails to cast properly; this bug was difficult enough to track down in the first place. Reported-and-tested-by: Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131 Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Samuel Thibault authored
commit 327b882d upstream. Commit f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") broke the port information in the speakup driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included, and no other header includes asm/serial.h. We here make sure serialio.c does get the arch-specific definition of SERIAL_PORT_DFNS from asm/serial.h, if any. Along the way, this makes sure that we do have information for the requested serial port number (index) Fixes: f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Rob Clark authored
commit 96c5d076 upstream. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-