- 03 Sep, 2020 16 commits
-
-
Navid Emamdoost authored
[ Upstream commit 5509ac65 ] in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Navid Emamdoost authored
[ Upstream commit 9ba8923c ] in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 6f2e8acd ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 20eca012 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit d3e3d2be ] Unlike the other instances which represent a complete loss of consistency within the rcache mechanism itself, or a fundamental and obvious misconfiguration by an IOMMU driver, the BUG_ON() in iova_magazine_free_pfns() can be provoked at more or less any time in a "spooky action-at-a-distance" manner by any old device driver passing nonsense to dma_unmap_*() which then propagates through to queue_iova(). Not only is this well outside the IOVA layer's control, it's also nowhere near fatal enough to justify panicking anyway - all that really achieves is to make debugging the offending driver more difficult. Let's simply WARN and otherwise ignore bogus PFNs. Reported-by:
Prakash Gupta <guptap@codeaurora.org> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 5a0c256d ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.comTested-by:
JiangYu <lnsyyj@hotmail.com> Acked-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 6499a0db ] The value av7110->debi_virt is stored in DMA memory, and it is assigned to data, and thus data[0] can be modified at any time by malicious hardware. In this case, "if (data[0] < 2)" can be passed, but then data[0] can be changed into a large number, which may cause buffer overflow when the code "av7110->ci_slot[data[0]]" is used. To fix this possible bug, data[0] is assigned to a local variable, which replaces the use of data[0]. Signed-off-by:
Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit e2ee9edc ] The original qcom kernel changed the PDM GPIOs to be pull-down during sleep at some point. Reportedly this was done because there was some "leakage at PDM outputs during sleep": https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0 I cannot say how effective this is, but everything seems to work fine with this change so let's apply the same to mainline just to be sure. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.netSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit deca1953 ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.eduSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c7fabbc5 ] Drop duplicated words in sound/pci/. {and, the, at} Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.orgSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mark Tomlinson authored
[ Upstream commit 272502fc ] When receiving an IPv4 packet inside an IPv6 GRE packet, and the IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would get corrupted. This is due to the common ip6_tnl_rcv() function assuming that the inner header is always IPv6. This patch checks the tunnel protocol for IPv4 inner packets, but still defaults to IPv6. Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mahesh Bandewar authored
[ Upstream commit d0f5c707 ] Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 47733f9d ] __tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1e ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Miaohe Lin authored
[ Upstream commit 55eff0eb ] We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c1 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 4ca0d9ac ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 83270702 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
-
- 26 Aug, 2020 24 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Will Deacon authored
Upstream commits fdfe7cbd ("KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()") and b5331379 ("KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set") fix a "sleeping from invalid context" BUG caused by unmap_stage2_range() attempting to reschedule when called on the OOM path. Unfortunately, these patches rely on the MMU notifier callback being passed knowledge about whether or not blocking is permitted, which was introduced in 4.19. Rather than backport this considerable amount of infrastructure just for KVM on arm, instead just remove the conditional reschedule. Cc: <stable@vger.kernel.org> # v4.9 only Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Juergen Gross authored
For support of long running hypercalls xen_maybe_preempt_hcall() is calling cond_resched() in case a hypercall marked as preemptible has been interrupted. Normally this is no problem, as only hypercalls done via some ioctl()s are marked to be preemptible. In rare cases when during such a preemptible hypercall an interrupt occurs and any softirq action is started from irq_exit(), a further hypercall issued by the softirq handler will be regarded to be preemptible, too. This might lead to rescheduling in spite of the softirq handler potentially having set preempt_disable(), leading to splats like: BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl INFO: lockdep is turned off. CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1 Call Trace: <IRQ> dump_stack+0x8f/0xd0 ___might_sleep.cold.76+0xb2/0x103 xen_maybe_preempt_hcall+0x48/0x70 xen_do_hypervisor_callback+0x37/0x40 RIP: e030:xen_hypercall_xen_version+0xa/0x20 Code: ... RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246 RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0 R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000 ? xen_hypercall_xen_version+0xa/0x20 ? xen_force_evtchn_callback+0x9/0x10 ? check_events+0x12/0x20 ? xen_restore_fl_direct+0x1f/0x20 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? debug_dma_sync_single_for_cpu+0x91/0xc0 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? xen_swiotlb_sync_single_for_cpu+0x3d/0x140 ? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en] ? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en] ? net_rx_action+0x151/0x4a0 ? __do_softirq+0xed/0x55b ? irq_exit+0xea/0x100 ? xen_evtchn_do_upcall+0x2c/0x40 ? xen_do_hypervisor_callback+0x29/0x40 </IRQ> ? xen_hypercall_domctl+0xa/0x20 ? xen_hypercall_domctl+0x8/0x20 ? privcmd_ioctl+0x221/0x990 [xen_privcmd] ? do_vfs_ioctl+0xa5/0x6f0 ? ksys_ioctl+0x60/0x90 ? trace_hardirqs_off_thunk+0x1a/0x20 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x62/0x250 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix that by testing preempt_count() before calling cond_resched(). In kernel 5.8 this can't happen any more due to the entry code rework (more than 100 patches, so not a candidate for backporting). The issue was introduced in kernel 4.3, so this patch should go into all stable kernels in [4.3 ... 5.7]. Reported-by:
Sarah Newman <srn@prgmr.com> Fixes: 0fa2f5cb ("sched/preempt, xen: Use need_resched() instead of should_resched()") Cc: Sarah Newman <srn@prgmr.com> Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Chris Brannon <cmb@prgmr.com> Signed-off-by:
-
Peter Xu authored
commit 75802ca6 upstream. This is found by code observation only. Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g). Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge. Mike said: : With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect. : : We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. : : However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases: : : 1) for a single page : 2) for range == entire vma : : In those cases, the current code should produce the correct results. : : To be safe, let's just cc stable. Fixes: 017b1660 ("mm: migration: fix migration of huge PMD shared pages") Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 52c47969 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Marc Zyngier authored
commit a9ed4a65 upstream. When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael Ellerman authored
commit 63dee5df upstream. We have powerpc specific logic in our page fault handling to decide if an access to an unmapped address below the stack pointer should expand the stack VMA. The code was originally added in 2004 "ported from 2.4". The rough logic is that the stack is allowed to grow to 1MB with no extra checking. Over 1MB the access must be within 2048 bytes of the stack pointer, or be from a user instruction that updates the stack pointer. The 2048 byte allowance below the stack pointer is there to cover the 288 byte "red zone" as well as the "about 1.5kB" needed by the signal delivery code. Unfortunately since then the signal frame has expanded, and is now 4224 bytes on 64-bit kernels with transactional memory enabled. This means if a process has consumed more than 1MB of stack, and its stack pointer lies less than 4224 bytes from the next page boundary, signal delivery will fault when trying to expand the stack and the process will see a SEGV. The total size of the signal frame is the size of struct rt_sigframe (which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on 64-bit). The 2048 byte allowance was correct until 2008 as the signal frame was: struct rt_sigframe { struct ucontext uc; /* 0 1440 */ /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1440 16 */ unsigned int tramp[6]; /* 1456 24 */ struct siginfo * pinfo; /* 1480 8 */ void * puc; /* 1488 8 */ struct siginfo info; /* 1496 128 */ /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1624 288 */ /* size: 1920, cachelines: 15, members: 7 */ /* padding: 8 */ }; 1920 + 128 = 2048 Then in commit ce48b210 ("powerpc: Add VSX context save/restore, ptrace and signal support") (Jul 2008) the signal frame expanded to 2304 bytes: struct rt_sigframe { struct ucontext uc; /* 0 1696 */ <-- /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1696 16 */ unsigned int tramp[6]; /* 1712 24 */ struct siginfo * pinfo; /* 1736 8 */ void * puc; /* 1744 8 */ struct siginfo info; /* 1752 128 */ /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1880 288 */ /* size: 2176, cachelines: 17, members: 7 */ /* padding: 8 */ }; 2176 + 128 = 2304 At this point we should have been exposed to the bug, though as far as I know it was never reported. I no longer have a system old enough to easily test on. Then in 2010 commit 320b2b8d ("mm: keep a guard page below a grow-down stack segment") caused our stack expansion code to never trigger, as there was always a VMA found for a write up to PAGE_SIZE below r1. That meant the bug was hidden as we continued to expand the signal frame in commit 2b0a576d ("powerpc: Add new transactional memory state to the signal context") (Feb 2013): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ <-- /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[288]; /* 3576 288 */ /* size: 3872, cachelines: 31, members: 8 */ /* padding: 8 */ /* last cacheline: 32 bytes */ }; 3872 + 128 = 4000 And commit 573ebfa6 ("powerpc: Increase stack redzone for 64-bit userspace to 512 bytes") (Feb 2014): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[512]; /* 3576 512 */ <-- /* size: 4096, cachelines: 32, members: 8 */ /* padding: 8 */ }; 4096 + 128 = 4224 Then finally in 2017, commit 1be7107f ("mm: larger stack guard gap, between vmas") exposed us to the existing bug, because it changed the stack VMA to be the correct/real size, meaning our stack expansion code is now triggered. Fix it by increasing the allowance to 4224 bytes. Hard-coding 4224 is obviously unsafe against future expansions of the signal frame in the same way as the existing code. We can't easily use sizeof() because the signal frame structure is not in a header. We will either fix that, or rip out all the custom stack expansion checking logic entirely. Fixes: ce48b210 ("powerpc: Add VSX context save/restore, ptrace and signal support") Cc: stable@vger.kernel.org # v2.6.27+ Reported-by:
Tom Lane <tgl@sss.pgh.pa.us> Tested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.auSigned-off-by:
-
Vasant Hegde authored
commit 90a9b102 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by:
-
Tom Rix authored
[ Upstream commit 774d977a ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 062fa09f ] When power_up_sst() fails, stream needs to be freed just like when try_module_get() fails. However, current code is returning directly and ends up leaking memory. Fixes: 0121327c ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Fugang Duan authored
[ Upstream commit c6165cf0 ] Correct the error path for regulator disable. Fixes: 9269e556 ("net: fec: add phy-reset-gpios PROBE_DEFER check") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Przemyslaw Patynowski authored
[ Upstream commit 4bd5e02a ] Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a760 ("i40e: Add promiscuous on VLAN support") Fixes: 3b120089 ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit 5872331b ] If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point. In this case, count == move, and split will be zero, and we will attempt a negative index into map[]. Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block. Fixes: ef2b02d3 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit bd72866b ] These accessors must be used to read/write a big-endian bus. The value returned or written is native-endian. However, these accessors are defined using be{16,32}_to_cpu() or cpu_to_be{16,32}() to make the endian conversion but these expect a __be{16,32} when none is present. Keeping them would need a force cast that would solve nothing at all. So, do the conversion using swab{16,32}, like done in asm-generic for similar situations. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Eiichi Tsukata authored
[ Upstream commit 96cf2a2c ] If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN shows the following warning: UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23 member access within null pointer of type 'struct xfs_kobj' Call Trace: dump_stack+0x10e/0x195 ubsan_type_mismatch_common+0x241/0x280 __ubsan_handle_type_mismatch_v1+0x32/0x40 init_xfs_fs+0x12b/0x28f do_one_initcall+0xdd/0x1d0 do_initcall_level+0x151/0x1b6 do_initcalls+0x50/0x8f do_basic_setup+0x29/0x2b kernel_init_freeable+0x19f/0x20b kernel_init+0x11/0x1e0 ret_from_fork+0x22/0x30 Fix it by checking parent_kobj before the code accesses its member. Signed-off-by:
Eiichi Tsukata <devel@etsukata.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> [darrick: minor whitespace edits] Signed-off-by:
-
Mao Wenan authored
[ Upstream commit 481a0d74 ] The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%. call trace as below: virtnet_poll virtnet_receive virtqueue_get_buf_ctx virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split virtqueue_napi_complete virtqueue_poll //return true virtqueue_napi_schedule //it will reschedule napi to fix this, return false if vq is broken in virtqueue_poll. Signed-off-by:
Mao Wenan <wenan.mao@linux.alibaba.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.comSigned-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Javed Hasan authored
[ Upstream commit ec007ef4 ] In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't. This fix is to call fc_frame_free(fp) before function returns. Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Santosh Vernekar <svernekar@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Zhe Li authored
[ Upstream commit 798b7347 ] The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by:
Zhe Li <lizhe67@huawei.com> Reviewed-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit f959b5d0 ] xfs_trans_dqresv is the function that we use to make reservations against resource quotas. Each resource contains two counters: the q_core counter, which tracks resources allocated on disk; and the dquot reservation counter, which tracks how much of that resource has either been allocated or reserved by threads that are working on metadata updates. For disk blocks, we compare the proposed reservation counter against the hard and soft limits to decide if we're going to fail the operation. However, for inodes we inexplicably compare against the q_core counter, not the incore reservation count. Since the q_core counter is always lower than the reservation count and we unlock the dquot between reservation and transaction commit, this means that multiple threads can reserve the last inode count before we hit the hard limit, and when they commit, we'll be well over the hard limit. Fix this by checking against the incore inode reservation counter, since we would appear to maintain that correctly (and that's what we report in GETQUOTA). Signed-off-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Greg Ungerer authored
[ Upstream commit bdee0e79 ] The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed). This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example. Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register. Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
Xiongfeng Wang authored
[ Upstream commit 4aec14de ] When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Evgeny Novikov authored
[ Upstream commit 9c487b0b ] If platform_driver_register() fails within vpss_init() resources are not cleaned up. The patch fixes this issue by introducing the corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit fc045645 ] budget_register() has no error handling after its failure. Add the missed undo functions for error handling to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Stanley Chu authored
[ Upstream commit c0a18ee0 ] It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a delay before VCC is powered off. Sdd Micron vendor ID and this quirk for Micron devices. Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.comReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
