- 18 May, 2018 40 commits
-
-
Christophe Jaillet authored
The 'free_irq()' call is not at the right place in the error handling path. The changed order has been introduced in commit 3d4253d9 ("[SCSI] qlogicpti: Convert to new SBUS device framework.") Fixes: 3d4253d9 ("[SCSI] qlogicpti: Convert to new SBUS device framework.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Vijay Viswanath authored
UFS driver can receive a request during memory reclaim by kswapd. So when ufs driver puts the ungate work in queue, and if there are no idle workers, kthreadd is invoked to create a new kworker. Since kswapd task holds a mutex which kthreadd also needs, this can cause a deadlock situation. So ungate work must be done in a separate work queue with WQ_MEM_RECLAIM flag enabled. Such a workqueue will have a rescue thread which will be called when the above deadlock condition is possible. Signed-off-by:
Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Venkat Gopalakrishnan authored
As multiple requests are submitted to the ufs host controller in parallel there could be instances where the command completion interrupt arrives later for a request that is already processed earlier as the corresponding doorbell was cleared when handling the previous interrupt. Read the interrupt status in a loop after processing the received interrupt to catch such interrupts and handle it. Signed-off-by:
Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by:
-
Subhash Jadavani authored
UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION is only applicable for QCOM UFS host controller version 2.x.y and this has been fixed from version 3.x.y onwards, hence this change removes this quirk for version 3.x.y onwards. [mkp: applied by hand] Signed-off-by:
-
Subhash Jadavani authored
Currently we call the scsi_block_requests()/scsi_unblock_requests() whenever we want to block/unblock scsi requests but as there is no reference counting, nesting of these calls could leave us in undesired state sometime. Consider following call flow sequence: 1. func1() calls scsi_block_requests() but calls func2() before calling scsi_unblock_requests() 2. func2() calls scsi_block_requests() 3. func2() calls scsi_unblock_requests() 4. func1() calls scsi_unblock_requests() As there is no reference counting, we will have scsi requests unblocked after #3 instead of it to be unblocked only after #4. Though we may not have failures seen with this, we might run into some failures in future. Better solution would be to fix this by adding reference counting. Signed-off-by:
-
Subhash Jadavani authored
Vendor specific setup_clocks ops may depend on clocks managed by ufshcd driver so if the vendor specific setup_clocks callback is called when the required clocks are turned off, it results into unclocked register access. This change make sure that required clocks are enabled before vendor specific setup_clocks callback is called. Signed-off-by:
-
Maya Erez authored
The device can set the exception event bit in one of the response UPIU, for example to notify the need for urgent BKOPs operation. In such a case, the host driver calls ufshcd_exception_event_handler to handle this notification. When trying to check the exception event status (for finding the cause for the exception event), the device may be busy with additional SCSI commands handling and may not respond within the 100ms timeout. To prevent that, we need to block SCSI commands during handling of exception events and allow retransmissions of the query requests, in case of timeout. Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1] this moves the sg_list variable off the stack, as already done for other allocated buffers in adpt_i2o_passthru(). Additionally consolidates the error path for kfree(). [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bjorn Andersson authored
devfreq requires that the client operates on actual frequencies, not only 0 and UMAX_INT and as such UFS brok with the introduction of f1d981ea ("PM / devfreq: Use the available min/max frequency"). This patch registers the frequencies of the first clock with devfreq and use these to determine if we're trying to step up or down. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [for devfreq & OPP part] Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
Failing to register with devfreq leaves hba->devfreq assigned, which causes the error path to dereference the ERR_PTR(). Rather than bolting on more conditionals, move the call of devm_devfreq_add_device() into it's own function and only update hba->devfreq once it's successfully registered. The subsequent patch builds upon this to make UFS actually work again, as it's been broken since f1d981ea ("PM / devfreq: Use the available min/max frequency") Also switch to use DEVFREQ_GOV_SIMPLE_ONDEMAND constant. Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Michael Kelley authored
Current code allocates 240 Kbytes (in typical configs) for each synthetic SCSI controller to use as temp cpumask variables. Recode to avoid needing the temp cpumask variables and remove the memory allocation. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Jens Remus authored
The comment on fsf_qtcb_bottom_port.supported_speed did read as if the field can only assume one of two possible values (i.e. 0x1 for 1 GBit/s or 0x2 for 2 GBit/s). This is not true for two reasons: first it is a flag field and can thus assume any combination and second there are meanwhile more speeds. Clarify comment on fsf_qtcb_bottom_port.supported_speed and add a comment to fsf_qtcb_bottom_config.fc_link_speed. Signed-off-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Fedor Loshakov <loshakov@linux.ibm.com> Acked-by:
Benjamin Block <bblock@linux.ibm.com> Acked-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
-
Jens Remus authored
Add port speed capabilities as defined in FC-LS RPSC ELS that have a counterpart FC_PORTSPEED_* defined in scsi/scsi_transport_fc.h. Suggested-by:
-
Jens Remus authored
Otherwise iterating with list_for_each() over the adapter->erp_ready_head and adapter->erp_running_head lists can lead to an infinite loop. See commit "zfcp: fix infinite iteration on erp_ready_head list". The run-time check is only performed for debug kernels which have the kernel lock validator enabled. Following is an example of the warning that is reported, if the ERP lock is not held when calling zfcp_dbf_rec_trig(): WARNING: CPU: 0 PID: 604 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x172/0x188 Modules linked in: ... CPU: 0 PID: 604 Comm: kworker/u128:3 Not tainted 4.16.0-... #1 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Workqueue: zfcp_q_0.0.1906 zfcp_scsi_rport_work Krnl PSW : 00000000330fdbf9 00000000367e9728 (zfcp_dbf_rec_trig+0x172/0x188) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 Krnl GPRS: 00000000c57a5d99 3288200000000000 0000000000000000 000000006cc82740 00000000009d09d6 0000000000000000 00000000000000ff 0000000000000000 0000000000000000 0000000000e1b5fe 000000006de01d38 0000000076130958 000000006cc82548 000000006de01a98 00000000009d09d6 000000006a6d3c80 Krnl Code: 00000000009d0ad2: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0ad8: c0f4000d7dd0 brcl 15,b80678 #00000000009d0ade: a7f40001 brc 15,9d0ae0 >00000000009d0ae2: a7f4ff7d brc 15,9d09dc 00000000009d0ae6: e340f0f00004 lg %r4,240(%r15) 00000000009d0aec: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0af2: 07f4 bcr 15,%r4 00000000009d0af4: 0707 bcr 0,%r7 Call Trace: ([<00000000009d09d6>] zfcp_dbf_rec_trig+0x66/0x188) [<00000000009dd740>] zfcp_scsi_rport_work+0x98/0x190 [<0000000000169b34>] process_one_work+0x3d4/0x6f8 [<000000000016a08a>] worker_thread+0x232/0x418 [<000000000017219e>] kthread+0x166/0x178 [<0000000000b815ea>] kernel_thread_starter+0x6/0xc [<0000000000b815e4>] kernel_thread_starter+0x0/0xc 2 locks held by kworker/u128:3/604: #0: ((wq_completion)name){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 #1: ((work_completion)(&port->rport_work)){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 Last Breaking-Event-Address: [<00000000009d0ade>] zfcp_dbf_rec_trig+0x16e/0x188 ---[ end trace b2f4020572e2c124 ]--- Suggested-by: -
Steffen Maier authored
I just happened to see the function header indentation of zfcp_fc_enqueue_event() and I picked some more from checkpatch: $ checkpatch.pl --strict -f drivers/s390/scsi/zfcp_fc.c ... CHECK: Alignment should match open parenthesis #113: FILE: drivers/s390/scsi/zfcp_fc.c:113: + fc_host_post_event(adapter->scsi_host, fc_get_event_number(), + event->code, event->data); CHECK: Blank lines aren't necessary before a close brace '}' #118: FILE: drivers/s390/scsi/zfcp_fc.c:118: + +} ... The change complements v2.6.36 commit 2d1e547f ("[SCSI] zfcp: Post events through FC transport class"). Signed-off-by:
-
Steffen Maier authored
Make use of feature introduced with v3.2 commit 29443691 ("[SCSI] scsi: Added support for adapter and firmware reset"). The common code interface was introduced for commit 95d31262 ("[SCSI] qla4xxx: Added support for adapter and firmware reset"). $ echo adapter > /sys/class/scsi_host/host<N>/host_reset Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : scshr_y SCSI sysfs host_reset yes LUN : 0xffffffffffffffff none (invalid) WWPN : 0x0000000000000000 none (invalid) D_ID : 0x00000000 none (invalid) Adapter status : 0x4500050b Port status : 0x00000000 none (invalid) LUN status : 0x00000000 none (invalid) Ready count : 0x00000001 Running count : 0x00000000 ERP want : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER ERP need : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER This is the common code equivalent to the zfcp-specific &dev_attr_adapter_failed.attr in zfcp_sysfs_adapter_attrs.attrs[]: $ echo 0 > /sys/bus/ccw/drivers/zfcp/<devbusid>/failed The unsupported case returns EOPNOTSUPP: $ echo firmware > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Operation not supported Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : scshr_n SCSI sysfs host_reset no Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0xffffffa1 -EOPNOTSUPP==-95 SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 For any other invalid value, common code returns EINVAL without invoking our callback: $ echo foo > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Invalid argument Signed-off-by:
-
Steffen Maier authored
While the default did already correctly print "Initiator" let's make it explicit and convert zfcp to the feature. $ cat /sys/class/scsi_host/host0/supported_mode Initiator $ cat /sys/class/scsi_host/host0/active_mode Initiator The default worked, because not setting the field has it initialized to zero == MODE_UNKNOWN. scsi_host_alloc() sets shost->active_mode = MODE_INITIATOR in this case. The sysfs accessor function show_shost_supported_mode() assumes MODE_INITIATOR in this case. This default behavior was introduced with v2.6.24 commit 7a39ac3f ("[SCSI] make supported_mode default to initiator."). The feature flag was introduced with v2.6.24 commit 5dc2b89e ("[SCSI] add supported_mode and active_mode attributes to the host"). So there was no release where zfcp would have shown "unknown". Signed-off-by:
-
Steffen Maier authored
Since v2.6.27 commit 553448f6 ("[SCSI] zfcp: Message cleanup"), none of the callers has been interested any more. Values were not returned consistently in all ERP trigger functions. Signed-off-by:
-
Steffen Maier authored
Simplify its signature to return boolean and rename it to zfcp_erp_action_is_running() to indicate its actual unmodified semantics. It has always been used like this since v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter."). Signed-off-by:
-
Steffen Maier authored
All constant defines were introduced with v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter.") and refactored into enums with commit 287ac01a ("[SCSI] zfcp: Cleanup code in zfcp_erp.c"). ZFCP_STATUS_ERP_DISMISSING and ZFCP_ERP_STEP_FSF_XCONFIG were never used. v2.6.27 commit 287ac01a ("[SCSI] zfcp: Cleanup code in zfcp_erp.c") removed the use of ZFCP_ERP_ACTION_READY on refactoring zfcp_erp_action_exists() to now only check adapter->erp_running_head but no longer adapter->erp_ready_head. The same commit could have changed the function return type from int to "enum zfcp_erp_act_state". ZFCP_ERP_ACTION_READY was never used outside of zfcp_erp_action_exists(). Signed-off-by:
-
Steffen Maier authored
I've been mixing up zfcp_task_mgmt_function() [SCSI] and zfcp_fsf_fcp_task_mgmt() [FSF] so often lately that I wanted to fix this. SCSI changes complement v2.6.27 commit f76af7d7 ("[SCSI] zfcp: Cleanup of code in zfcp_scsi.c"). While at it, also fixup the other inconsistencies elsewhere. ERP changes complement v2.6.27 commit 287ac01a ("[SCSI] zfcp: Cleanup code in zfcp_erp.c") which introduced status_change_set(). FC changes complement v2.6.32 commit 6f53a2d2 ("[SCSI] zfcp: Apply common naming conventions to zfcp_fc"). by renaming a leftover introduced with v2.6.27 commit cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports"). FSF changes fixup v2.6.32 commit a4623c46 ("[SCSI] zfcp: Improve request allocation through mempools"). which replaced zfcp_fsf_alloc_qtcb() introduced with v2.6.27 commit c41f8cbd ("[SCSI] zfcp: zfcp_fsf cleanup."). SCSI fc_host statistics were introduced with v2.6.16 commit f6cd94b1 ("[SCSI] zfcp: transport class adaptations"). SCSI fc_host port_state was introduced with v2.6.27 commit 85a82392 ("[SCSI] zfcp: Add port_state attribute to sysfs"). SCSI rport setter for dev_loss_tmo was introduced with v2.6.18 commit 338151e0 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable"). Signed-off-by:
-
Steffen Maier authored
As a prerequisite, complement commit 3d1cb205 ("workqueue: include workqueue info when printing debug dump of a worker task") to be usable with kernel modules by exporting the symbol set_worker_desc(). Current built-in user was introduced with commit ef3b1019 ("writeback: set worker desc to identify writeback workers in task dumps"). Can help distinguishing work items which do not have adapter scope. Description is printed out with task dump for debugging on WARN, BUG, panic, or magic-sysrq [show-task-states(t)]. Example: $ echo 0 >| /sys/bus/ccw/drivers/zfcp/0.0.1880/0x50050763031bd327/failed & $ echo 't' >| /proc/sysrq-trigger $ dmesg sysrq: SysRq : Show State task PC stack pid father ... zfcp_q_0.0.1880 S14640 2165 2 0x02000000 Call Trace: ([<00000000009df464>] __schedule+0xbf4/0xc78) [<00000000009df57c>] schedule+0x94/0xc0 [<0000000000168654>] rescuer_thread+0x33c/0x3a0 [<000000000016f8be>] kthread+0x166/0x178 [<00000000009e71f2>] kernel_thread_starter+0x6/0xc [<00000000009e71ec>] kernel_thread_starter+0x0/0xc no locks held by zfcp_q_0.0.1880/2165. ... kworker/u512:2 D11280 2193 2 0x02000000 Workqueue: zfcp_q_0.0.1880 zfcp_scsi_rport_work [zfcp] (zrpd-50050763031bd327) ^^^^^^^^^^^^^^^^^^^^^ Call Trace: ([<00000000009df464>] __schedule+0xbf4/0xc78) [<00000000009df57c>] schedule+0x94/0xc0 [<00000000009e50c0>] schedule_timeout+0x488/0x4d0 [<00000000001e425c>] msleep+0x5c/0x78 >>test code only<< [<000003ff8008a21e>] zfcp_scsi_rport_work+0xbe/0x100 [zfcp] [<0000000000167154>] process_one_work+0x3b4/0x718 [<000000000016771c>] worker_thread+0x264/0x408 [<000000000016f8be>] kthread+0x166/0x178 [<00000000009e71f2>] kernel_thread_starter+0x6/0xc [<00000000009e71ec>] kernel_thread_starter+0x0/0xc 2 locks held by kworker/u512:2/2193: #0: (name){++++.+}, at: [<0000000000166f4e>] process_one_work+0x1ae/0x718 #1: ((&(&port->rport_work)->work)){+.+.+.}, at: [<0000000000166f4e>] process_one_work+0x1ae/0x718 ... ============================================= Showing busy workqueues and worker pools: workqueue zfcp_q_0.0.1880: flags=0x2000a pwq 512: cpus=0-255 flags=0x4 nice=0 active=1/1 in-flight: 2193:zfcp_scsi_rport_work [zfcp] pool 512: cpus=0-255 flags=0x4 nice=0 hung=0s workers=4 idle: 5 2354 2311 Work items with adapter scope are already identified by the workqueue name "zfcp_q_<devbusid>" and the work item function name. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Steffen Maier authored
Note: zfcp_scsi_eh_host_reset_handler() will be converted in a later patch. zfcp_scsi_eh_device_reset_handler() now only depends on scsi_device. zfcp_scsi_eh_target_reset_handler() now only depends on scsi_target. All derive other objects from these intended callback arguments. zfcp_scsi_eh_target_reset_handler() is special: The FCP channel requires a valid LUN handle so we try to find ourselves a stand-in scsi_device as suggested by Hannes Reinecke. If it cannot find a stand-in scsi device, trace a record like the following (formatted with zfcpdbf from s390-tools): Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : tr_nosd target reset, no SCSI device Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x00000000 SCSI ID/target denoting scope SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0x00002003 field re-used for midlayer value: FAILED SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 Actually change the signature of zfcp_task_mgmt_function() used by zfcp_scsi_eh_device_reset_handler() & zfcp_scsi_eh_target_reset_handler(). Since it was prepared in a previous patch, we only need to delete a local auto variable which is now the intended argument. Suggested-by:Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Steffen Maier authored
Intentionally retrieve the rport by walking SCSI common code objects rather than zfcp_sdev->port->rport. The latter is used for pairing the calls to fc_remote_port_add() and fc_remote_port_delete(). [see v2.6.31 commit 379d6bf6 ("[SCSI] zfcp: Add port only once to FC transport class")] zfcp_scsi_rport_register() sets zfcp_port.rport to what fc_remote_port_add() returned. zfcp_scsi_rport_block() sets zfcp_port.rport = NULL after having called fc_remote_port_delete(). Hence, while an rport is blocked (or in any subsequent state due to scsi_transport_fc timeouts such as fast_io_fail_tmo or dev_loss_tmo), zfcp_port.rport is NULL and cannot serve as argument to fc_block_rport(). During zfcp recovery, a just recovered zfcp_port can have the UNBLOCKED status flag, but an async rport unblocking has only started via zfcp_scsi_schedule_rport_register() in zfcp_erp_try_rport_unblock() [see v4.10 commit 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery")] in zfcp_erp_action_cleanup(). Now zfcp_erp_wait() can return. This would be sufficient to successfully send a TMF. But the rport can still be blocked and zfcp_port.rport can still be NULL until zfcp_port.rport_work was scheduled and has actually called fc_remote_port_add() and assigned its return value to zfcp_port.rport. We need an unblocked rport for a successful scsi_eh TUR. Similarly, for a zfcp_port which has just lost its UNBLOCKED status flag, the return of zfcp_erp_wait() can race with zfcp_port.rport_work queued by zfcp_scsi_schedule_rport_block(). Therefore we cannot reliably access zfcp_port.rport. However, we'd like to get fc_rport_block()'s opinion on when fast_io_fail_tmo triggered. While we might use flush_work(&port->rport_work) to sync with the work item, we can simply use the other way to get an rport pointer. Signed-off-by:
-
Steffen Maier authored
Actually change the signature of zfcp_fsf_fcp_task_mgmt(). Since it was prepared in the previous patch, we only need to delete a local auto variable which is now the intended argument. Prepare zfcp_fsf_fcp_task_mgmt's caller zfcp_task_mgmt_function() to have its function body only depend on a scsi_device and derived objects. Signed-off-by:
-
Steffen Maier authored
In zfcp_fsf_fcp_task_mgmt() resolve the still old argument scsi_cmnd into scsi_device very early and only depend on scsi_device and derived objects in the function body. This prepares to later change the function signature replacing the scsi_cmnd argument with scsi_device. Signed-off-by:
-
Steffen Maier authored
This reverts commit 2443c8b2 ("[SCSI] zfcp: Merge FCP task management setup with regular FCP command setup"), because this introduced a dependency on the unsuitable SCSI command for scsi_eh / TMF. Signed-off-by:
-
Steffen Maier authored
Originally, I planned for TMF handling to have different context data in fsf_req->data depending on the TMF scope in fcp_cmnd->fc_tm_flags: * scsi_device if FCP_TMF_LUN_RESET, * zfcp_port if FCP_TMF_TGT_RESET. However, the FCP channel requires a valid LUN handle so we now use scsi_device as context data with any TMF for the time being. Regular SCSI I/O FCP requests continue using scsi_cmnd as req->data. Hence, the callers of zfcp_fsf_fcp_handler_common() must resolve req->data and pass scsi_device as common context. While at it, remove the detour zfcp_sdev->port->adapter and use the more direct req->adapter as elsewhere in this function already. Signed-off-by:
-
Steffen Maier authored
The SCSI command pointer passed to scsi_eh callbacks is just one arbitrary command of potentially many that are in the eh queue to be processed. The command is only used to indirectly pass the TMF scope in terms of SCSI ID/target and SCSI LUN for LUN reset. Hence, zfcp had filled in SCSI trace record fields which do not really belong to the TMF. This was confusing. Therefore, refactor the TMF tracing to work without SCSI command. Since the FCP channel always requires a valid LUN handle, we use SCSI device as common context for any TMF (even target reset). To make it even clearer, we set all bits to 1 for the fields, which do not belong to the TMF, to indicate that these fields are invalid. The old zfcp_dbf_scsi() became zfcp_dbf_scsi_common() to now handle both SCSI commands and TMFs. The old argument scsi_cmnd is now optional and can be NULL with TMFs. The new argument scsi_device is mandatory to carry context, as well as SCSI ID/target and SCSI LUN in case of TMFs. New example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : [lt]r_.... Request ID : 0x<reqid> ID of FSF FCP request with TM flag For cases without FSF request: 0x0 for none (invalid) SCSI ID : 0x<scsi_id> SCSI ID/target denoting scope SCSI LUN : 0x<scsi_lun> SCSI LUN denoting scope SCSI LUN high : 0x<scsi_lun_high> SCSI LUN denoting scope SCSI result : 0xffffffff none (invalid) SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0x00 FCP_RSP info code of TMF FCP rsp IU : 00000000 00000000 00000100 00000000 ext FCP_RSP IU 00000000 00000008 ext FCP_RSP IU FCP rsp IU len : 32 FCP_RSP IU length Payload time : ... FCP rsp IU all : 00000000 00000000 00000100 00000000 full FCP_RSP IU 00000000 00000008 00000000 00000000 full FCP_RSP IU Signed-off-by: -
Steffen Maier authored
Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by:
-
Steffen Maier authored
That other commit introduced an inconsistency because it would trace on ERP_FAILED for all callers of port forced reopen triggers (not just terminate_rport_io), but it would not trace on ERP_FAILED for all callers of other ERP triggers such as adapter, port regular, LUN. Therefore, generalize that other commit. zfcp_erp_action_enqueue() already had two early outs which re-used the one zfcp_dbf_rec_trig() call. All ERP trigger functions finally run through zfcp_erp_action_enqueue(). So move the special handling for ZFCP_STATUS_COMMON_ERP_FAILED into zfcp_erp_action_enqueue() and add another early out with new trace marker for pseudo ERP need in this case. This removes all early returns from all ERP trigger functions so we always end up at zfcp_dbf_rec_trig(). Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by:
-
Steffen Maier authored
For problem determination we always want to see when we were invoked on the terminate_rport_io callback whether we perform something or not. Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec: loose remote port t workqueue [s] zfcp_q_<dev> IRQ zfcperp<dev> === ================== =================== ============================ 0 recv RSCN q p.test_link_work block rport start fast_io_fail_tmo send ADISC ELS 4 recv ADISC fail block zfcp_port port forced reopen send open port 12 recv open port fail q p.gid_pn_work zfcp_erp_wakeup (zfcp_erp_wait would return) GID_PN fail Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail, e.g. with the typical 5 sec setting. port.status |= ERP_FAILED If fast_io_fail_tmo triggers after this point, we missed a SCSI trace. workqueue fc_dl_<host> ================== 27 fc_timeout_fail_rport_io fc_terminate_rport_io zfcp_scsi_terminate_rport_io zfcp_erp_port_forced_reopen _zfcp_erp_port_forced_reopen if (port.status & ERP_FAILED) return; Therefore, write a trace before above early return. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : sctrpi1 SCSI terminate rport I/O LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> D_ID : 0x<n_port_id> Adapter status : 0x... Port status : 0x... LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by: -
Steffen Maier authored
get_device() and its internally used kobject_get() only return NULL if they get passed NULL as argument. zfcp_get_port_by_wwpn() loops over adapter->port_list so the iteration variable port is always non-NULL. Struct device is embedded in struct zfcp_port so &port->dev is always non-NULL. This is the argument to get_device(). However, if we get an fc_rport in terminate_rport_io() for which we cannot find a match within zfcp_get_port_by_wwpn(), the latter can return NULL. v2.6.30 commit 70932935 ("[SCSI] zfcp: Fix oops when port disappears") introduced an early return without adding a trace record for this case. Even if we don't need recovery in this case, for debugging we should still see that our callback was invoked originally by scsi_transport_fc. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : sctrpin SCSI terminate rport I/O, no zfcp port LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> WWPN D_ID : 0x<n_port_id> N_Port-ID Adapter status : 0x... Port status : 0xffffffff unknown (-1) LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by:
-
Steffen Maier authored
If a SCSI device is deleted during scsi_eh host reset, we cannot get a reference to the SCSI device anymore since scsi_device_get returns !=0 by design. Assuming the recovery of adapter and port(s) was successful, zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the half-gone SCSI device. Unfortunately, it causes the following confusing trace record which states that zfcp will do a LUN recovery as "ERP need" is ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want". Old example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING but not ZFCP_STATUS_COMMON_UNBLOCKED as it was closed on close part of adapter reopen ERP want : 0x01 ERP need : 0x01 misleading However, zfcp_erp_setup_act() returns NULL as it cannot get the reference. Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery actually happens. We always do want the recovery trigger trace record even if no erp_action could be enqueued as in this case. For other cases where we did not enqueue an erp_action, 'need' has always been zero to indicate this. In order to indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP need" as 'not needed' but still keep the information which erp_action type, that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to be visibly different from 0x0_ in "ERP want". New example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ERP want : 0x01 ERP need : 0xc1 would need LUN ERP, but no action set up ^ Before v2.6.38 commit ae0904f6 ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") we could detect this case because the "erp_action" field in the trace was NULL. The rework removed erp_action as argument and field from the trace. This patch here is for tracing. A fix to allow LUN recovery in the case at hand is a topic for a separate patch. See also commit fdbd1c5e ("[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference") for a similar case and background info. Signed-off-by: -
Steffen Maier authored
We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of our eh callback and an actual send/recv of an abort / TMF request. In order to see the temporal sequence including any abort / TMF send retries, add a trace before the above two blocking functions. This supports problem determination with scsi_eh and parallel zfcp ERP. No need to explicitly trace the beginning of our eh callback, since we typically can send an abort / TMF and see its HBA response (in the worst case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes almost the beginning of the callback. No need to explicitly trace the wakeup after the above two blocking functions because the next retry loop causes another trace in any case and that is sufficient. Example trace records formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : abrt_wt abort, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x<scsi_result_of_cmd_to_be_aborted> SCSI retries : 0x<retries_of_cmd_to_be_aborted> SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted> SCSI scribble : 0x<req_id_of_cmd_to_be_aborted> SCSI opcode : <CDB_of_cmd_to_be_aborted> FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : lr_wait LUN reset, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x... unrelated SCSI retries : 0x.. unrelated SCSI allowed : 0x.. unrelated SCSI scribble : 0x... unrelated SCSI opcode : ... unrelated FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Signed-off-by:
-
Steffen Maier authored
For problem determination we need to see whether and why we were successful or not. This allows deduction of scsi_eh escalation. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : schrh_r SCSI host reset handler result Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS or in other cases: 0x2009 == FAST_IO_FAIL SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 v2.6.35 commit a1dbfddd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh") introduced the first return with something other than the previously hardcoded single SUCCESS return path. Signed-off-by: -
Uma Krishnan authored
Depending on the underlying transport, cxlflash has a dependency on either the CXL or OCXL drivers, which are enabled via their Kconfig option. Instead of having a module wide dependency on these config options, it is better to isolate the object modules that are dependent on the CXL and OCXL drivers and adjust the module dependencies accordingly. This commit isolates the object files that are dependent on CXL and/or OCXL. The cxl/ocxl fops used in the core driver are tucked under an ifdef to avoid compilation errors. Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Uma Krishnan authored
As a staging cleanup to support transport specific builds of the cxlflash module, relocate device dependent assignments to header files. This will avoid littering the core driver with conditional compilation logic. Signed-off-by:
-
Uma Krishnan authored
The new header file, backend.h, that was recently added is missing the include guards. This commit adds the guards. Signed-off-by:
-
Matthew R. Ochs authored
AFUs can only process a single AFU command at a time. This is enforced with a global mutex situated within the AFU send routine. As this mutex has a global scope, it has the potential to unnecessarily block commands destined for other AFUs. Instead of using a global mutex, transition the mutex to be per-AFU. This will allow commands to only be blocked by siblings of the same AFU. Signed-off-by:
-
