- 12 Sep, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-09-09 This series contains updates to i40e and igc drivers. Stefan Assmann changes num_vlans to u16 to fix may be used uninitialized error and propagates error in i40_set_vsi_promisc() for i40e. Vinicius corrects timestamping latency values for i225 devices and accounts for TX timestamping delay for igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Sep, 2020 1 commit
-
-
Claudiu Manoil authored
This is the correct resolution for the conflict from merging the "net" tree fix: commit 26cb7085 ("enetc: Remove the mdio bus on PF probe bailout") with the "net-next" new work: commit 07095c02 ("net: enetc: Use DT protocol information to set up the ports") that moved mdio bus allocation to an ealier stage of the PF probing routine. Fixes: a57066b1 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Sep, 2020 22 commits
-
-
Lucy Yan authored
Increase Rx ring size to address issue where hardware is reaching the receive work limit. Before: [ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached Signed-off-by: Lucy Yan <lucyyan@google.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
There is no @validate argument. CC: Johannes Berg <johannes.berg@intel.com> Fixes: 3de64403 ("netlink: re-add parse/validate functions in strict mode") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where each value is a number of a buffer to direct that priority's traffic to. That value is however never validated to lie within the bounds set by DCBX_MAX_BUFFERS. The only driver that currently implements the callback is mlx5 (maintainers CCd), and that does not do any validation either, in particual allowing incorrect configuration if the prio2buffer value does not fit into 4 bits. Instead of offloading the need to validate the buffer index to drivers, do it right there in core, and bounce the request if the value is too large. CC: Parav Pandit <parav@nvidia.com> CC: Saeed Mahameed <saeedm@nvidia.com> Fixes: e549f6f9 ("net/dcb: Add dcbnl buffer attribute") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== net: Fix bridge enslavement failure Patch #1 fixes an issue in which an upper netdev cannot be enslaved to a bridge when it has multiple netdevs with different parent identifiers beneath it. Patch #2 adds a test case using two netdevsim instances. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Test that an upper device of netdevs with different parent IDs can be enslaved to a bridge. The test fails without previous commit. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a netdev is enslaved to a bridge, its parent identifier is queried. This is done so that packets that were already forwarded in hardware will not be forwarded again by the bridge device between netdevs belonging to the same hardware instance. The operation fails when the netdev is an upper of netdevs with different parent identifiers. Instead of failing the enslavement, have dev_get_port_parent_id() return '-EOPNOTSUPP' which will signal the bridge to skip the query operation. Other callers of the function are not affected by this change. Fixes: 7e1146e8 ("net: devlink: introduce devlink_compat_switch_id_get() helper") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Release first buffer as last one since it contains references to subsequent fragments. This code will be optimized introducing multi-buffer bit in xdp_buff structure. Fixes: ca0e0146 ("net: mvneta: move skb build after descriptors processing") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Wait until the QDIO data connection is severed. Otherwise the device might still be processing the buffers, and end up accessing skb data that we already freed. Fixes: 8b5026bc ("s390/qeth: fix qdio teardown after early init error") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Remove the weird space inside the NETIF_F_CSUM_MASK. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Since commit 8d7017fd ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"), we use blackhole_netdev to invalidate dst entries instead of loopback device anymore. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f0 ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Since the micrel phy driver calls phy_init_hw() as a workaround, the commit 9886a4db ("net: phy: call phy_disable_interrupts() in phy_init_hw()") disables the interrupt unexpectedly. So, call phy_disable_interrupts() in phy_attach_direct() instead. Otherwise, the phy cannot link up after the ethernet cable was disconnected. Note that other drivers (like at803x.c) also calls phy_init_hw(). So, perhaps, the driver caused a similar issue too. Fixes: 9886a4db ("net: phy: call phy_disable_interrupts() in phy_init_hw()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
The previous change "hv_netvsc: Switch the data path at the right time during hibernation" adds the call of netvsc_vf_changed() upon NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message when the VF is brought UP or DOWN. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
When netvsc_resume() is called, the mlx5 VF NIC has not been resumed yet, so in the future the host might sliently fail the call netvsc_vf_changed() -> netvsc_switch_datapath() there, even if the call works now. Call netvsc_vf_changed() in the NETDEV_CHANGE event handler: at that time the mlx5 VF NIC has been resumed. Fixes: 19162fd4 ("hv_netvsc: Fix hibernation for mlx5 VF driver") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Currently there is concurrent reset and enqueue operation for the same lockless qdisc when there is no lock to synchronize the q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in qdisc_deactivate() called by dev_deactivate_queue(), which may cause out-of-bounds access for priv->ring[] in hns3 driver if user has requested a smaller queue num when __dev_xmit_skb() still enqueue a skb with a larger queue_mapping after the corresponding qdisc is reset, and call hns3_nic_net_xmit() with that skb later. Reused the existing synchronize_net() in dev_deactivate_many() to make sure skb with larger queue_mapping enqueued to old qdisc(which is saved in dev_queue->qdisc_sleeping) will always be reset when dev_reset_queue() is called. Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Helmut Grohne authored
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
mptcp_pm_nl_get_local_id may be called in interrupt context, so we need to use GFP_ATOMIC flag to allocate memory to avoid sleeping in atomic context. [ 280.209809] BUG: sleeping function called from invalid context at mm/slab.h:498 [ 280.209812] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1680, name: kworker/1:3 [ 280.209814] INFO: lockdep is turned off. [ 280.209816] CPU: 1 PID: 1680 Comm: kworker/1:3 Tainted: G W 5.9.0-rc3-mptcp+ #146 [ 280.209818] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 280.209820] Workqueue: events mptcp_worker [ 280.209822] Call Trace: [ 280.209824] <IRQ> [ 280.209826] dump_stack+0x77/0xa0 [ 280.209829] ___might_sleep.cold+0xa6/0xb6 [ 280.209832] kmem_cache_alloc_trace+0x1d1/0x290 [ 280.209835] mptcp_pm_nl_get_local_id+0x23c/0x410 [ 280.209840] subflow_init_req+0x1e9/0x2ea [ 280.209843] ? inet_reqsk_alloc+0x1c/0x120 [ 280.209845] ? kmem_cache_alloc+0x264/0x290 [ 280.209849] tcp_conn_request+0x303/0xae0 [ 280.209854] ? printk+0x53/0x6a [ 280.209857] ? tcp_rcv_state_process+0x28f/0x1374 [ 280.209859] tcp_rcv_state_process+0x28f/0x1374 [ 280.209864] ? tcp_v4_do_rcv+0xb3/0x1f0 [ 280.209866] tcp_v4_do_rcv+0xb3/0x1f0 [ 280.209869] tcp_v4_rcv+0xed6/0xfa0 [ 280.209873] ip_protocol_deliver_rcu+0x28/0x270 [ 280.209875] ip_local_deliver_finish+0x89/0x120 [ 280.209877] ip_local_deliver+0x180/0x220 [ 280.209881] ip_rcv+0x166/0x210 [ 280.209885] __netif_receive_skb_one_core+0x82/0x90 [ 280.209888] process_backlog+0xd6/0x230 [ 280.209891] net_rx_action+0x13a/0x410 [ 280.209895] __do_softirq+0xcf/0x468 [ 280.209899] asm_call_on_stack+0x12/0x20 [ 280.209901] </IRQ> [ 280.209903] ? ip_finish_output2+0x240/0x9a0 [ 280.209906] do_softirq_own_stack+0x4d/0x60 [ 280.209908] do_softirq.part.0+0x2b/0x60 [ 280.209911] __local_bh_enable_ip+0x9a/0xa0 [ 280.209913] ip_finish_output2+0x264/0x9a0 [ 280.209916] ? rcu_read_lock_held+0x4d/0x60 [ 280.209920] ? ip_output+0x7a/0x250 [ 280.209922] ip_output+0x7a/0x250 [ 280.209925] ? __ip_finish_output+0x330/0x330 [ 280.209928] __ip_queue_xmit+0x1dc/0x5a0 [ 280.209931] __tcp_transmit_skb+0xa0f/0xc70 [ 280.209937] tcp_connect+0xb03/0xff0 [ 280.209939] ? lockdep_hardirqs_on_prepare+0xe7/0x190 [ 280.209942] ? ktime_get_with_offset+0x125/0x150 [ 280.209944] ? trace_hardirqs_on+0x1c/0xe0 [ 280.209948] tcp_v4_connect+0x449/0x550 [ 280.209953] __inet_stream_connect+0xbb/0x320 [ 280.209955] ? mark_held_locks+0x49/0x70 [ 280.209958] ? lockdep_hardirqs_on_prepare+0xe7/0x190 [ 280.209960] ? __local_bh_enable_ip+0x6b/0xa0 [ 280.209963] inet_stream_connect+0x32/0x50 [ 280.209966] __mptcp_subflow_connect+0x1fd/0x242 [ 280.209972] mptcp_pm_create_subflow_or_signal_addr+0x2db/0x600 [ 280.209975] mptcp_worker+0x543/0x7a0 [ 280.209980] process_one_work+0x26d/0x5b0 [ 280.209984] ? process_one_work+0x5b0/0x5b0 [ 280.209987] worker_thread+0x48/0x3d0 [ 280.209990] ? process_one_work+0x5b0/0x5b0 [ 280.209993] kthread+0x117/0x150 [ 280.209996] ? kthread_park+0x80/0x80 [ 280.209998] ret_from_fork+0x22/0x30 Fixes: 01cacb00 ("mptcp: add netlink-based PM") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geliang Tang says: ==================== mptcp: fix subflow's local_id/remote_id issues v2: - add Fixes tags; - simply with 'return addresses_equal'; - use 'reversed Xmas tree' way. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
This patch set the init remote_id to zero, otherwise it will be a random number. Then it added the missing subflow's remote_id setting code both in __mptcp_subflow_connect and in subflow_ulp_clone. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Fixes: ec3edaa7 ("mptcp: Add handling of outgoing MP_JOIN requests") Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it always return 0. Thus every subflow's local_id is 0. It's incorrect. This patch fixed this issue. Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When we use the zero address as a local address, it means that we can use any one of the local addresses. The zero address is not a new address, we don't need to add it to PM, so this patch added a new function address_zero to check whether an address is the zero address, if it is, we ignore this address. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tetsuo Handa authored
I confirmed that the problem fixed by commit 2a63866c ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Evgeniy does not have the time nor capacity to maintain the connector subsystem any longer, so just move it under networking as that is effectively what has been happening lately. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Sep, 2020 16 commits
-
-
Vinicius Costa Gomes authored
When timestamping a packet there's a delay between the start of the packet and the point where the hardware actually captures the timestamp. This difference needs to be considered if we want accurate timestamps. This was done on the RX side, but not on the TX side. Fixes: 2c344ae2 ("igc: Add support for TX timestamping") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Vinicius Costa Gomes authored
The previous timestamping latency numbers were obtained by interpolating the i210 numbers with the i225 crystal clock value. That calculation was wrong. Use the correct values from real measurements. Fixes: 81b05520 ("igc: Add support for RX timestamping") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Stefan Assmann authored
The for loop in i40e_set_vsi_promisc() reports errors via dev_err() but does not propagate the error up the call chain. Instead it continues the loop and potentially overwrites the reported error value. This results in the error being recorded in the log buffer, but the caller might never know anything went the wrong way. To avoid this situation i40e_set_vsi_promisc() needs to temporarily store the error after reporting it. This is still not optimal as multiple different errors may occur, so store the first error and hope that's the main issue. Fixes: 37d318d7 (i40e: Remove scheduling while atomic possibility) Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Stefan Assmann authored
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function ‘i40e_set_vsi_promisc’: drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1176:14: error: ‘aq_ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] i40e_status aq_ret; In case the code inside the if statement and the for loop does not get executed aq_ret will be uninitialized when the variable gets returned at the end of the function. Avoid this by changing num_vlans from int to u16, so aq_ret always gets set. Making this change in additional places as num_vlans should never be negative. Fixes: 37d318d7 ("i40e: Remove scheduling while atomic possibility") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
David S. Miller authored
Igor Russkikh says: ==================== net: qed disable aRFS in NPAR and 100G This patchset fixes some recent issues found by customers. v3: resending on Dmitry's behalf v2: correct hash in Fixes tag ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d1 ("qed: Relax VF firmware requirements") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
In some configurations ARFS cannot be used, so disable it if device is not capable. Fixes: e4917d46 ("qede: Add aRFS support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
In CMT and NPAR the PF is unknown when the GFS block processes the packet. Therefore cannot use searcher as it has a per PF database, and thus ARFS must be disabled. Fixes: d51e4af5 ("qed: aRFS infrastructure support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.9 First set of fixes for v5.9, small but important. brcmfmac * fix a throughput regression on bcm4329 mt76 * fix a regression with stations reconnecting on mt7616 * properly free tx skbs, it was working by accident before mwifiex * fix a regression with 256 bit encryption keys wlcore * revert AES CMAC support as it caused a regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.9-rc5 Yesterday, Eric reported a race condition found by syzbot. This series contains two commits, one that fixes the direct issue, and another that addresses the more general issue, as a defense in depth. 1) The basic problem syzbot unearthed was that one particular mutation of handshake->entry was not protected by the handshake mutex like the other cases, so this patch basically just reorders a line to make sure the mutex is actually taken at the right point. Most of the work here went into making sure the race was fully understood and making a reproducer (which syzbot was unable to do itself, due to the rarity of the race). 2) Eric's initial suggestion for fixing this was taking a spinlock around the hash table replace function where the null ptr deref was happening. This doesn't address the main problem in the most precise possible way like (1) does, but it is a good suggestion for defense-in-depth, in case related issues come up in the future, and basically costs nothing from a performance perspective. I thought it aided in implementing a good general rule: all mutators of that hash table take the table lock. So that's part of this series as a companion. Both of these contain Fixes: tags and are good candidates for stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Eric's suggested fix for the previous commit's mentioned race condition was to simply take the table->lock in wg_index_hashtable_replace(). The table->lock of the hash table is supposed to protect the bucket heads, not the entires, but actually, since all the mutator functions are already taking it, it makes sense to take it too for the test to hlist_unhashed, as a defense in depth measure, so that it no longer races with deletions, regardless of what other locks are protecting individual entries. This is sensible from a performance perspective because, as Eric pointed out, the case of being unhashed is already the unlikely case, so this won't add common contention. And comparing instructions, this basically doesn't make much of a difference other than pushing and popping %r13, used by the new `bool ret`. More generally, I like the idea of locking consistency across table mutator functions, and this might let me rest slightly easier at night. Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Eric reported that syzkaller found a race of this variety: CPU 1 CPU 2 -------------------------------------------|--------------------------------------- wg_index_hashtable_replace(old, ...) | if (hlist_unhashed(&old->index_hash)) | | wg_index_hashtable_remove(old) | hlist_del_init_rcu(&old->index_hash) | old->index_hash.pprev = NULL hlist_replace_rcu(&old->index_hash, ...) | *old->index_hash.pprev | Syzbot wasn't actually able to reproduce this more than once or create a reproducer, because the race window between checking "hlist_unhashed" and calling "hlist_replace_rcu" is just so small. Adding an mdelay(5) or similar there helps make this demonstrable using this simple script: #!/bin/bash set -ex trap 'kill $pid1; kill $pid2; ip link del wg0; ip link del wg1' EXIT ip link add wg0 type wireguard ip link add wg1 type wireguard wg set wg0 private-key <(wg genkey) listen-port 9999 wg set wg1 private-key <(wg genkey) peer $(wg show wg0 public-key) endpoint 127.0.0.1:9999 persistent-keepalive 1 wg set wg0 peer $(wg show wg1 public-key) ip link set wg0 up yes link set wg1 up | ip -force -batch - & pid1=$! yes link set wg1 down | ip -force -batch - & pid2=$! wait The fundumental underlying problem is that we permit calls to wg_index_ hashtable_remove(handshake.entry) without requiring the caller to take the handshake mutex that is intended to protect members of handshake during mutations. This is consistently the case with calls to wg_index_ hashtable_insert(handshake.entry) and wg_index_hashtable_replace( handshake.entry), but it's missing from a pertinent callsite of wg_ index_hashtable_remove(handshake.entry). So, this patch makes sure that mutex is taken. The original code was a little bit funky though, in the form of: remove(handshake.entry) lock(), memzero(handshake.some_members), unlock() remove(handshake.entry) The original intention of that double removal pattern outside the lock appears to be some attempt to prevent insertions that might happen while locks are dropped during expensive crypto operations, but actually, all callers of wg_index_hashtable_insert(handshake.entry) take the write lock and then explicitly check handshake.state, as they should, which the aforementioned memzero clears, which means an insertion should already be impossible. And regardless, the original intention was necessarily racy, since it wasn't guaranteed that something else would run after the unlock() instead of after the remove(). So, from a soundness perspective, it seems positive to remove what looks like a hack at best. The crash from both syzbot and from the script above is as follows: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 7395 Comm: kworker/0:3 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-kex-wg1 wg_packet_handshake_receive_worker RIP: 0010:hlist_replace_rcu include/linux/rculist.h:505 [inline] RIP: 0010:wg_index_hashtable_replace+0x176/0x330 drivers/net/wireguard/peerlookup.c:174 Code: 00 fc ff df 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 44 01 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 10 48 89 c6 48 c1 ee 03 <80> 3c 0e 00 0f 85 06 01 00 00 48 85 d2 4c 89 28 74 47 e8 a3 4f b5 RSP: 0018:ffffc90006a97bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888050ffc4f8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88808e04e010 RBP: ffff88808e04e000 R08: 0000000000000001 R09: ffff8880543d0000 R10: ffffed100a87a000 R11: 000000000000016e R12: ffff8880543d0000 R13: ffff88808e04e008 R14: ffff888050ffc508 R15: ffff888050ffc500 FS: 0000000000000000(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f5505db0 CR3: 0000000097cf7000 CR4: 00000000001526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: wg_noise_handshake_begin_session+0x752/0xc9a drivers/net/wireguard/noise.c:820 wg_receive_handshake_packet drivers/net/wireguard/receive.c:183 [inline] wg_packet_handshake_receive_worker+0x33b/0x730 drivers/net/wireguard/receive.c:220 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ye Bin authored
clean follow coccicheck warning: net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== net: skb_put_padto() fixes sysbot reported a bug in qrtr leading to use-after-free. First patch fixes the issue. Second patch addes __must_check attribute to avoid similar issues in the future. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Carl Huang <cjhuang@codeaurora.org> Cc: Wen Gong <wgong@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-