- 07 Jun, 2018 40 commits
-
-
Jimmy Assarsson authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 6ee00865 upstream. Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped. Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Steven Rostedt (VMware) authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit dc432c3d upstream. The regex match function regex_match_front() in the tracing filter logic, was fixed to test just the pattern length from testing the entire test string. That is, it went from strncmp(str, r->pattern, len) to strcmp(str, r->pattern, r->len). The issue is that str is not guaranteed to be nul terminated, and if r->len is greater than the length of str, it can access more memory than is allocated. The solution is to add a simple test if (len < r->len) return 0. Cc: stable@vger.kernel.org Fixes: 285caad4 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 184add2c upstream. Richard Jones has reported that using med_power_with_dipm on a T450s with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is causing the machine to hang. Switching the LPM to max_performance fixes this, so it seems that this Sandisk SSD does not handle LPM well. Note in the past there have been bug-reports about the following Sandisk models not working with min_power, so we may need to extend the quirk list in the future: name - firmware Sandisk SD6SB2M512G1022I - X210400 Sandisk SD6PP4M-256G-1006 - A200906 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Reported-and-tested-by:
Richard W.M. Jones <rjones@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 4bf01ca2 upstream. Make sure to free the rfkill device in case registration fails during probe. Fixes: 5e7ca393 ("net: rfkill: gpio: convert to resource managed allocation") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Yi Zhao authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 83e2d058 upstream. It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host. But the return value is unknown for user program: ip xfrm policy list RTNETLINK answers: Unknown error 524 Replace ENOTSUPP with EOPNOTSUPP: ip xfrm policy list RTNETLINK answers: Operation not supported Signed-off-by:
Yi Zhao <yi.zhao@windriver.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Nathan Harold <nharold@google.com> Signed-off-by:
-
Wei Fang authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit b86e3307 upstream. A dead loop can be triggered in f2fs_fiemap() using the test case as below: ... fd = open(); fallocate(fd, 0, 0, 4294967296); ioctl(fd, FS_IOC_FIEMAP, fiemap_buf); ... It's caused by an overflow in __get_data_block(): ... bh->b_size = map.m_len << inode->i_blkbits; ... map.m_len is an unsigned int, and bh->b_size is a size_t which is 64 bits on 64 bits archtecture, type conversion from an unsigned int to a size_t will result in an overflow. In the above-mentioned case, bh->b_size will be zero, and f2fs_fiemap() will call get_data_block() at block 0 again an again. Fix this by adding a force conversion before left shift. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Acked-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit b8b78495 upstream. Syzbot has reported that it can hit a NULL pointer dereference in wb_workfn() due to wb->bdi->dev being NULL. This indicates that wb_workfn() was called for an already unregistered bdi which should not happen as wb_shutdown() called from bdi_unregister() should make sure all pending writeback works are completed before bdi is unregistered. Except that wb_workfn() itself can requeue the work with: mod_delayed_work(bdi_wq, &wb->dwork, 0); and if this happens while wb_shutdown() is waiting in: flush_delayed_work(&wb->dwork); the dwork can get executed after wb_shutdown() has finished and bdi_unregister() has cleared wb->bdi->dev. Make wb_workfn() use wakeup_wb() for requeueing the work which takes all the necessary precautions against racing with bdi unregistration. CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> CC: Tejun Heo <tj@kernel.org> Fixes: 839a8e86Reported-by:
syzbot <syzbot+9873874c735f2892e7e9@syzkaller.appspotmail.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit bf2acc94 upstream. syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out() with following C-repro : socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242 setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0 writev(3, [{"\270", 1}], 1) = 1 setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0 writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144 The 3rd system call looks odd : setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 This patch makes sure bound checking is using an unsigned compare. Fixes: ee995283 ("tcp: Initial repair mode") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Olsa authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit bfb3d7b8 upstream. If the get_callchain_buffers fails to allocate the buffer it will decrease the nr_callchain_events right away. There's no point of checking the allocation error for nr_callchain_events > 1. Removing that check. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.orgSigned-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 3099a529 upstream. syzbot reported an uninit-value in inet_csk_bind_conflict() [1] It turns out we never propagated sk->sk_reuseport into timewait socket. [1] BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320 inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4416e9 RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9 RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004 RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08 R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478 R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756 inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: da5e3630 ("soreuseport: TCP/IPv4 implementation") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit b855ff82 upstream. syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook() Thanks to the nice report, I tracked the problem to dccp not caring of ireq->ir_mark for passive sessions. BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline] BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84 CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline] iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] __ip_local_out net/ipv4/ip_output.c:113 [inline] ip_local_out net/ipv4/ip_output.c:122 [inline] ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x455259 RSP: 002b:00007f1a4473dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f1a4473e6d4 RCX: 0000000000455259 RDX: 0000000000000000 RSI: 0000000020b76fc8 RDI: 0000000000000015 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004f0 R14: 00000000006fa720 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797 dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92 dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408 dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414 dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197 dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:449 [inline] ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] process_backlog+0x62d/0xe20 net/core/dev.c:5307 napi_poll net/core/dev.c:5705 [inline] net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771 __do_softirq+0x56d/0x93d kernel/softirq.c:285 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756 reqsk_alloc include/net/request_sock.h:88 [inline] inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145 dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600 dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317 dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612 dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682 dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578 sk_backlog_rcv include/net/sock.h:908 [inline] __sk_receive_skb+0x60e/0xf20 net/core/sock.c:513 dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:449 [inline] ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] process_backlog+0x62d/0xe20 net/core/dev.c:5307 napi_poll net/core/dev.c:5705 [inline] net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771 __do_softirq+0x56d/0x93d kernel/softirq.c:285 Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 77d36398 upstream. syzbot complained : BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861 CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 memcmp+0x119/0x180 lib/string.c:861 __hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline] __dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662 ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914 addrconf_join_solict net/ipv6/addrconf.c:2078 [inline] addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline] addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954 process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113 worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247 kthread+0x539/0x720 kernel/kthread.c:239 Fixes: f001fde5 ("net: introduce a list of device addresses dev_addr_list (v6)") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit b13dda9f upstream. syzbot reported __skb_try_recv_from_queue() was using skb->peeked while it was potentially unitialized. We need to clear it in __skb_clone() Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit b1993a2d upstream. syzbot reported : BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline] BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline] BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091 @remaining is an integer, coming from user space. If it is negative we want rtnh_ok() to return false. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 6091f09c upstream. syzbot reported : BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline] BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit a466856e upstream. syzbot reported : BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162 We need to check addr_len before dereferencing sa (or uaddr) Fixes: bb30b884 ("crypto: af_alg - whitelist mask and type") Signed-off-by:
-
Julian Anastasov authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 5c64576a upstream. syzkaller reports for wrong rtnl_lock usage in sync code [1] and [2] We have 2 problems in start_sync_thread if error path is taken, eg. on memory allocation error or failure to configure sockets for mcast group or addr/port binding: 1. recursive locking: holding rtnl_lock while calling sock_release which in turn calls again rtnl_lock in ip_mc_drop_socket to leave the mcast group, as noticed by Florian Westphal. Additionally, sock_release can not be called while holding sync_mutex (ABBA deadlock). 2. task hung: holding rtnl_lock while calling kthread_stop to stop the running kthreads. As the kthreads do the same to leave the mcast group (sock_release -> ip_mc_drop_socket -> rtnl_lock) they hang. Fix the problems by calling rtnl_unlock early in the error path, now sock_release is called after unlocking both mutexes. Problem 3 (task hung reported by syzkaller [2]) is variant of problem 2: use _trylock to prevent one user to call rtnl_lock and then while waiting for sync_mutex to block kthreads that execute sock_release when they are stopped by stop_sync_thread. [1] IPVS: stopping backup sync thread 4500 ... WARNING: possible recursive locking detected 4.16.0-rc7+ #3 Not tainted -------------------------------------------- syzkaller688027/4497 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: IPVS: stopping backup sync thread 4495 ... (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtnl_mutex); lock(rtnl_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by syzkaller688027/4497: #0: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000703f78e3>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 stack backtrace: CPU: 1 PID: 4497 Comm: syzkaller688027 Not tainted 4.16.0-rc7+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_deadlock_bug kernel/locking/lockdep.c:1761 [inline] check_deadlock kernel/locking/lockdep.c:1805 [inline] validate_chain kernel/locking/lockdep.c:2401 [inline] __lock_acquire+0xe8f/0x3e00 kernel/locking/lockdep.c:3431 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 ip_mc_drop_socket+0x88/0x230 net/ipv4/igmp.c:2643 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:413 sock_release+0x8d/0x1e0 net/socket.c:595 start_sync_thread+0x2213/0x2b70 net/netfilter/ipvs/ip_vs_sync.c:1924 do_ip_vs_set_ctl+0x1139/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2389 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1261 udp_setsockopt+0x45/0x80 net/ipv4/udp.c:2406 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2975 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x446a69 RSP: 002b:00007fa1c3a64da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000446a69 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006e29fc R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 00000000006e29f8 R13: 00676e697279656b R14: 00007fa1c3a659c0 R15: 00000000006e2b60 [2] IPVS: sync thread started: state = BACKUP, mcast_ifn = syz_tun, syncid = 4, id = 0 IPVS: stopping backup sync thread 25415 ... INFO: task syz-executor7:25421 blocked for more than 120 seconds. Not tainted 4.16.0-rc6+ #284 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D23688 25421 4408 0x00000004 Call Trace: context_switch kernel/sched/core.c:2862 [inline] __schedule+0x8fb/0x1ec0 kernel/sched/core.c:3440 schedule+0xf5/0x430 kernel/sched/core.c:3499 schedule_timeout+0x1a3/0x230 kernel/time/timer.c:1777 do_wait_for_common kernel/sched/completion.c:86 [inline] __wait_for_common kernel/sched/completion.c:107 [inline] wait_for_common kernel/sched/completion.c:118 [inline] wait_for_completion+0x415/0x770 kernel/sched/completion.c:139 kthread_stop+0x14a/0x7a0 kernel/kthread.c:530 stop_sync_thread+0x3d9/0x740 net/netfilter/ipvs/ip_vs_sync.c:1996 do_ip_vs_set_ctl+0x2b1/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2394 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1253 sctp_setsockopt+0x2ca/0x63e0 net/sctp/socket.c:4154 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:3039 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454889 RSP: 002b:00007fc927626c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fc9276276d4 RCX: 0000000000454889 RDX: 000000000000048c RSI: 0000000000000000 RDI: 0000000000000017 RBP: 000000000072bf58 R08: 0000000000000018 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000051c R14: 00000000006f9b40 R15: 0000000000000001 Showing all locks held in the system: 2 locks held by khungtaskd/868: #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] check_hung_uninterruptible_tasks kernel/hung_task.c:175 [inline] #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] watchdog+0x1c5/0xd60 kernel/hung_task.c:249 #1: (tasklist_lock){.+.+}, at: [<0000000037c2f8f9>] debug_show_all_locks+0xd3/0x3d0 kernel/locking/lockdep.c:4470 1 lock held by rsyslogd/4247: #0: (&f->f_pos_lock){+.+.}, at: [<000000000d8d6983>] __fdget_pos+0x12b/0x190 fs/file.c:765 2 locks held by getty/4338: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4339: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4340: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4341: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4342: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4343: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4344: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 3 locks held by kworker/0:5/6494: #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] work_static include/linux/workqueue.h:198 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_data kernel/workqueue.c:619 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] process_one_work+0xb12/0x1bb0 kernel/workqueue.c:2084 #1: ((addr_chk_work).work){+.+.}, at: [<00000000278427d5>] process_one_work+0xb89/0x1bb0 kernel/workqueue.c:2088 #2: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by syz-executor7/25421: #0: (ipvs->sync_mutex){+.+.}, at: [<00000000d414a689>] do_ip_vs_set_ctl+0x277/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2393 2 locks held by syz-executor7/25427: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000e6d48489>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 1 lock held by syz-executor7/25435: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by ipvs-b:2:0/25415: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 Reported-and-tested-by: syzbot+a46d6abf9d56b1365a72@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+5fe074c01b2032ce9618@syzkaller.appspotmail.com Fixes: e0b26cc9 ("ipvs: call rtnl_lock early") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Zubin Mithra <zsm@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Bin Liu authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 2b63f132 upstream. musb_start_urb() doesn't check the pass-in parameter if it is NULL. But in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is returned from first_qh(), which could be NULL. So wrap the musb_start_urb() call here with a if condition check to avoid the potential NULL pointer dereference. Fixes: f283862f ("usb: musb: NAK timeout scheme on bulk TX endpoint") Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
SZ Lin (林上智) authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 4205cb01 upstream. This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit c3a65808 upstream. Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs). Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests: { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) }, For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise. Note that this will likely need to be backported to stable in order to make future device-id backports more manageable. Reviewed-by:
-
Alan Stern authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit fb5ee84e upstream. Some non-compliant high-speed USB devices have bulk endpoints with a 1024-byte maxpacket size. Although such endpoints don't work with xHCI host controllers, they do work with EHCI controllers. We used to accept these invalid sizes (with a warning), but we no longer do because of an unintentional change introduced by commit aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors"). This patch restores the old behavior, so that people with these peculiar devices can use them without patching their kernels by hand. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Suggested-by:
Elvinas <elvinas@veikia.lt> Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 4842ed5b upstream. If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways. Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it. Note that this also fixes an information leak of slab data. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit e5384092 upstream. Commit 65c79230 tried to clear the custom firmware path on exit by writing a single space to the firmware_class.path parameter. This doesn't work because nothing strips this space from the value stored and fw_get_filesystem_firmware() only ignores zero-length paths. Instead, write a null byte. Fixes: 0a8adf58 ("test: add firmware_class loader test") Fixes: 65c79230 ("test_firmware: fix setting old custom fw path back on exit") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thomas Hellstrom authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 13f149d4 upstream. A buffer object leak was introduced when fixing a premature buffer object release. Fix this. Cc: <stable@vger.kernel.org> Fixes: 73a88250 ("Fix a destoy-while-held mutex problem.") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Danit Goldberg authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 4f32ac2e upstream. Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
SZ Lin (林上智) authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 9306b38e upstream. This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Leon Romanovsky authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 002bf228 upstream. Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Roland Dreier authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 09abfe7b upstream. The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications. Fix this by explicitly allowing a zero address family for the source. Fixes: 2975d5de ("RDMA/ucma: Check AF family prior resolving address") Cc: <stable@vger.kernel.org> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Darrick J. Wong authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 7d83fb14 upstream. During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes. Fix it by using subtraction instead. Reproducer: xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096" Fixes: a904b1ca ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: <stable@vger.kernel.org> # v4.1+ Originally-From: Eric Biggers <ebiggers@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix signed integer addition overflow too] Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit f372b811 upstream. This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
Salvatore Bellizzi <lkml@seppia.net> Tested-by:
Guenter Roeck <groeck@chromium.org> Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 6bd6ae63 upstream. UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING: [ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds] [ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128 This happens because we were writing to the led structure before making sure that it exists. Reported-by:
Tasos Sahanidis <tasos@tasossah.com> Tested-by:
-
Mathieu Desnoyers authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit d66a270b upstream. Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist). Silence warning in out-of-memory conditions, given that the error is returned to the caller. This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot. Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com CC: Peter Zijlstra <peterz@infradead.org> CC: Jiri Olsa <jolsa@redhat.com> CC: Arnaldo Carvalho de Melo <acme@kernel.org> CC: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: Namhyung Kim <namhyung@kernel.org> CC: stable@vger.kernel.org Fixes: de7b2973 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints") Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 76b3421b upstream. Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently. This patch covers such control API callbacks and add the proper mutex locks. Reported-by:
DaeRyong Jeong <threeearcat@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Robert Rosengren authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 306a4f3c upstream. Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by:
Robert Rosengren <robert.rosengren@axis.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 8f22e525 upstream. The sequencer virmidi code has an open race at its output trigger callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls. snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX. The fix is just to move the spinlock to cover both the pending event and the new stream. The bug was spotted by a new fuzzer, RaceFuzzer. BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.krReported-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit f13876e2 upstream. Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go further and hit the sanity check pcm_sanity_check() when the ioctl is called right after open. It may eventually spew a kernel warning, as triggered by syzbot, depending on kconfig. The lack of PCM state check there was just an oversight. Although it's no real crash, the spurious kernel warning is annoying, so let's add the proper check. Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kristian Evensen authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 71a0483d upstream. The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
-
Markus Pargmann authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit bd2e778c upstream. ECC is only calculated for written pages. As erased pages are not actively written the ECC is always invalid. For this purpose the Hardware BCH unit is able to check for erased pages and does not raise an ECC error in this case. This behaviour can be influenced using the BCH_MODE register which sets the number of allowed bitflips in an erased page. Unfortunately the unit is not capable of fixing the bitflips in memory. To avoid complete software checks for erased pages, we can simply check buffers with uncorrectable ECC errors because we know that any erased page with errors is uncorrectable by the BCH unit. This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand to correct erased pages. To have the valid data in the buffer before using them, this patch moves the read_page_swap_end() call before the ECC status checking for-loop. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> [Squashed patches by Stefan and Boris to check ECC area] Tested-by:
Stefan Christ <s.christ@phytec.de> Acked-by:
Han xu <han.xu@nxp.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 7eccb738 upstream. Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done on host (mac80211) rather than firmware. Rebuild cipher header in every received data frames (that are notified through those HTT interfaces) from the rx_hdr_status tlv available in the rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED flag for the packets which requires mac80211 PN/TSC check support and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X, QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the rebuilding of cipher header to perform PN/TSC check for replay attack. Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers in raw mode needs to be fixed. Since Rx with these ciphers in raw mode does not work in the current form even without this patch and removing crypto tail for these chipers needs clean up, raw mode related issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up patches. Tested-by:
Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Sriram R <srirrama@codeaurora.org> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
BugLink: http://bugs.launchpad.net/bugs/1774173 commit 2f38c3c0 upstream. Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by:
-
