When using native XDP with the igb driver, the XDP frame data doesn't point to
the beginning of the packet. It's off by 16 bytes. Everything works as expected
with XDP skb mode.

Actually these 16 bytes are used to store the packet timestamps. Therefore, pull
the timestamp before executing any XDP operations and adjust all other code
accordingly. The igc driver does it like that as well.

Tested with Intel i210 card and AF_XDP sockets.

Fixes: 9cbc948b ("igb: add XDP support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.

The second call in intel_eth_pci_probe() will caused the following:-

[   16.578605] intel-eth-pci 0000:00:1e.5: No PHY found
[   16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed
[   16.680181] ------------[ cut here ]------------
[   16.684861] stmmac-0000:00:1e.5 already disabled
[   16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0
[   16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore
[   16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G     U            5.13.0-rc3-intel-lts #76
[   16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020
[   16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0
[   16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01
[   16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086
[   16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000
[   16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff
[   16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0
[   16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00
[   16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0
[   16.834047] FS:  00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000
[   16.842177] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0
[   16.855144] Call Trace:
[   16.857614]  clk_core_disable_lock+0x1b/0x30
[   16.861941]  intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel]
[   16.867913]  pci_device_probe+0xcf/0x150
[   16.871890]  really_probe+0xf5/0x3e0
[   16.875526]  driver_probe_device+0x64/0x150
[   16.879763]  device_driver_attach+0x53/0x60
[   16.883998]  __driver_attach+0x9f/0x150
[   16.887883]  ? device_driver_attach+0x60/0x60
[   16.892288]  ? device_driver_attach+0x60/0x60
[   16.896698]  bus_for_each_dev+0x77/0xc0
[   16.900583]  bus_add_driver+0x184/0x1f0
[   16.904469]  driver_register+0x6c/0xc0
[   16.908268]  ? 0xffffffffc07ae000
[   16.911598]  do_one_initcall+0x4a/0x210
[   16.915489]  ? kmem_cache_alloc_trace+0x305/0x4e0
[   16.920247]  do_init_module+0x5c/0x230
[   16.924057]  load_module+0x2894/0x2b70
[   16.927857]  ? __do_sys_finit_module+0xb5/0x120
[   16.932441]  __do_sys_finit_module+0xb5/0x120
[   16.936845]  do_syscall_64+0x42/0x80
[   16.940476]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.945586] RIP: 0033:0x7f98830e5ccd
[   16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48
[   16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd
[   16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012
[   16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3
[   17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328
[   17.011369] ---[ end trace df06a3dab26b988c ]---
[   17.016062] ------------[ cut here ]------------
[   17.020701] stmmac-0000:00:1e.5 already unprepared

Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the user specifies a hostname or domain name as part of the ip=
command-line option, preserve it and don't overwrite it with one
supplied by DHCP/BOOTP.

For instance, ip=::::myhostname::dhcp will use "myhostname" rather than
ignoring and overwriting it.

Fix the comment on ic_bootp_string that suggests it only copies a string
"if not already set"; it doesn't have any such logic.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

x/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-06-01

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.

Fixes: 34583bee ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When a driver's profile doesn't support a dedicated PTP-RQ,
configuration of CQE compression while HW TS is configured should fail.

Fixes: 885b8cfb ("net/mlx5e: Update ethtool setting of CQE compression")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When the driver's profile doesn't support a dedicated PTP-RQ, the PTP
accuracy of HW TS is affected by the CQE compression. In this case,
turn off CQE compression. Otherwise, the driver crashes:

BUG: kernel NULL pointer dereference, address:0000000000000018
...
...
RIP: 0010:mlx5e_ptp_rx_set_fs+0x25/0x1a0 [mlx5_core]
...
...
Call Trace:
 mlx5e_ptp_activate_channel+0xb2/0xf0 [mlx5_core]
 mlx5e_activate_priv_channels+0x3b9/0x8c0 [mlx5_core]
 ? __mutex_unlock_slowpath+0x45/0x2a0
 ? mlx5e_refresh_tirs+0x151/0x1e0 [mlx5_core]
 mlx5e_switch_priv_channels+0x1cd/0x2d0 [mlx5_core]
 ? mlx5e_xdp_allowed+0x150/0x150 [mlx5_core]
 mlx5e_safe_switch_params+0x118/0x3c0 [mlx5_core]
 ? __mutex_lock+0x6e/0x8e0
 ? mlx5e_hwstamp_set+0xa9/0x300 [mlx5_core]
 mlx5e_hwstamp_set+0x194/0x300 [mlx5_core]
 ? dev_ioctl+0x9b/0x3d0
 mlx5i_ioctl+0x37/0x60 [mlx5_core]
 mlx5i_pkey_ioctl+0x12/0x20 [mlx5_core]
 dev_ioctl+0xa9/0x3d0
 sock_ioctl+0x268/0x420
 __x64_sys_ioctl+0x3d8/0x790
 ? lockdep_hardirqs_on_prepare+0xe4/0x190
 do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 960fbfe2 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.

Fixes: 39ac237c ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

If not supported show an error and return instead of trying to offload
to the hardware and fail.

Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.

Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

TLS offload is not supported in switchdev mode.

Fixes: 7a9fb35e ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.

Fixes: 4bd9d507 ("net/mlx5e: Enforce setting of a single FEC mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

It looks as if the MAINTAINERS entries for the nfc mailing list
should be updated as I just got a "rejected" bounce from the nfc list.

-------
Your message to the Linux-nfc mailing-list was rejected for the following
reasons:

The message is not from a list member
-------
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxim Mikityanskiy says:

====================
Fix use-after-free after the TLS device goes down and up

This small series fixes a use-after-free bug in the TLS offload code.
The first patch is a preparation for the second one, and the second is
the fix itself.

v2 changes:

Remove unneeded EXPORT_SYMBOL_GPL.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a netdev with active TLS offload goes down, tls_device_down is
called to stop the offload and tear down the TLS context. However, the
socket stays alive, and it still points to the TLS context, which is now
deallocated. If a netdev goes up, while the connection is still active,
and the data flow resumes after a number of TCP retransmissions, it will
lead to a use-after-free of the TLS context.

This commit addresses this bug by keeping the context alive until its
normal destruction, and implements the necessary fallbacks, so that the
connection can resume in software (non-offloaded) kTLS mode.

On the TX side tls_sw_fallback is used to encrypt all packets. The RX
side already has all the necessary fallbacks, because receiving
non-decrypted packets is supported. The thing needed on the RX side is
to block resync requests, which are normally produced after receiving
non-decrypted packets.

The necessary synchronization is implemented for a graceful teardown:
first the fallbacks are deployed, then the driver resources are released
(it used to be possible to have a tls_dev_resync after tls_dev_del).

A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback
mode. It's used to skip the RX resync logic completely, as it becomes
useless, and some objects may be released (for example, resync_async,
which is allocated and freed by the driver).

Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RCU synchronization is guaranteed to finish in finite time, unlike a
busy loop that polls a flag. This patch is a preparation for the bugfix
in the next patch, where the same synchronize_net() call will also be
used to sync with the TX datapath.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'status'.

Eliminate the follow smatch warning:

drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xuan Zhuo says:

====================
virtio-net: fix for build_skb()

The logic of this piece is really messy. Fortunately, my refactored patch can be
completed with a small amount of testing.
====================
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, we should get buf based on
headroom instead of offset.

This patch solves this problem. But if you don't use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In merge mode, when xdp is enabled, if the headroom of buf is smaller
than virtnet_get_headroom(), xdp_linearize_page() will be called but the
variable of "headroom" is still 0, which leads to wrong logic after
entering page_to_skb().

[   16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[   16.602175] #PF: supervisor read access in kernel mode
[   16.603350] #PF: error_code(0x0000) - not-present page
[   16.604200] PGD 0 P4D 0
[   16.604686] Oops: 0000 [#1] SMP PTI
[   16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G    B             5.12.0+ #312
[   16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04
[   16.608217] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.618423] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.619738] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.624047] Call Trace:
[   16.624525]  ? release_pages+0x24d/0x730
[   16.625209]  unmap_single_vma+0xa9/0x130
[   16.625885]  unmap_vmas+0x76/0xf0
[   16.626480]  exit_mmap+0xa0/0x210
[   16.627129]  mmput+0x67/0x180
[   16.627673]  do_exit+0x3d1/0xf10
[   16.628259]  ? do_user_addr_fault+0x231/0x840
[   16.629000]  do_group_exit+0x53/0xd0
[   16.629631]  __x64_sys_exit_group+0x1d/0x20
[   16.630354]  do_syscall_64+0x3c/0x80
[   16.630988]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.631828] RIP: 0033:0x7f1a043d0191
[   16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167.
[   16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[   16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191
[   16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[   16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001
[   16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490
[   16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000
[   16.640408] Modules linked in:
[   16.640958] CR2: ffffecbfff7b43c8
[   16.641557] ---[ end trace bc4891c6ce46354c ]---
[   16.642335] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.652529] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.653887] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.658290] Kernel panic - not syncing: Fatal exception
[   16.659613] Kernel Offset: disabled
[   16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the in-kernel mark setting by doing an additional
sk_dst_reset() which was introduced by commit 50254256 ("sock: Reset
dst when changing sk_mark via setsockopt"). The code is now shared to
avoid any further suprises when changing the socket mark value.

Fixes: 84d1c617 ("net: sock: add sock_set_mark")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using sub-VLANs in the range of 1-7, the resulting value from:

	rx_vid = dsa_8021q_rx_vid_subvlan(ds, port, subvlan);

is wrong according to the description from tag_8021q.c:

 | 11  | 10  |  9  |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |  0  |
 +-----------+-----+-----------------+-----------+-----------------------+
 |    DIR    | SVL |    SWITCH_ID    |  SUBVLAN  |          PORT         |
 +-----------+-----+-----------------+-----------+-----------------------+

For example, when ds->index == 0, port == 3 and subvlan == 1,
dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for
subvlan == 0, but it should have returned 1043.

This is because the low portion of the subvlan bits are not masked
properly when writing into the 12-bit VLAN value. They are masked into
bits 4:3, but they should be masked into bits 5:4.

Fixes: 3eaae1d0 ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014
  Call Trace:
   llcp_sock_getname+0xb1/0xe0
   __sys_getpeername+0x95/0xc0
   ? lockdep_hardirqs_on_prepare+0xd5/0x180
   ? syscall_enter_from_user_mode+0x1c/0x40
   __x64_sys_getpeername+0x11/0x20
   do_syscall_64+0x36/0x70
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This can be reproduced with Syzkaller C repro (bind followed by
getpeername):
https://syzkaller.appspot.com/x/repro.c?x=14def446e00000

Cc: <stable@vger.kernel.org>
Fixes: d646960f ("NFC: Initial LLCP support")
Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fixed link does not need mdio bus and in that case mdio_bus_data will
not be allocated. Before using mdio_bus_data we should check for NULL.

This patch fix the kernel panic due to NULL pointer dereference of
mdio_bus_data when it is not allocated.

Without this patch we do see following kernel crash caused due to kernel
NULL pointer dereference.

Call trace:
stmmac_dvr_probe+0x3c/0x10b0
dwc_eth_dwmac_probe+0x224/0x378
platform_probe+0x68/0xe0
really_probe+0x130/0x3d8
driver_probe_device+0x68/0xd0
device_driver_attach+0x74/0x80
__driver_attach+0x58/0xf8
bus_for_each_dev+0x7c/0xd8
driver_attach+0x24/0x30
bus_add_driver+0x148/0x1f0
driver_register+0x64/0x120
__platform_driver_register+0x28/0x38
dwc_eth_dwmac_driver_init+0x1c/0x28
do_one_initcall+0x78/0x158
kernel_init_freeable+0x1f0/0x244
kernel_init+0x14/0x118
ret_from_fork+0x10/0x30
Code: f9002bfb 9113e2d9 910e6273 aa0003f7 (f9405c78)
---[ end trace 32d9d41562ddc081 ]---

Fixes: e5e5b771 ("net: stmmac: make in-band AN mode parsing is supported for non-DT")
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Fixes for 5.13

These patches address two issues in MPTCP.

Patch 1 fixes a locking issue affecting MPTCP-level retransmissions.

Patches 2-4 improve handling of out-of-order packet arrival early
in a connection, so it falls back to TCP rather than forcing a
reset. Includes a selftest.
====================

Link: https://lore.kernel.org/r/20210527233140.182728-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.

Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.

If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.

The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.

Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.

Currently we have a code path updating such field without handling
the relevant lock:

__mptcp_retrans() -> __mptcp_clean_una_wakeup()

Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.

Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock.

Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Fix incorrect sockopts unregistration from error path,
   from Florian Westphal.

2) A few patches to provide better error reporting when missing kernel
   netfilter options are missing in .config.

3) Fix dormant table flag updates.

4) Memleak in IPVS  when adding service with IP_VS_SVC_F_HASHED flag.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
  netfilter: nf_tables: fix table flag updates
  netfilter: nf_tables: extended netlink error reporting for chain type
  netfilter: nf_tables: missing error reporting for not selected expressions
  netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================

Link: https://lore.kernel.org/r/20210527190115.98503-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix current behavior of skipping template allocation in case the
ct action is in zone 0.

Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.

The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.

For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)

Will result in act_ct skipping the commit and nat actions in zone 0.

The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.

Fixes: b57dc7c1 ("net/sched: Introduce action ct")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20210526170110.54864-1-lariel@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently established connections are not offloaded if the filter has a
"ct commit" action. This behavior will not offload connections of the
following scenario:

$ tc_filter add dev $DEV ingress protocol ip prio 1 flower \
  ct_state -trk \
  action ct commit action goto chain 1

$ tc_filter add dev $DEV ingress protocol ip chain 1 prio 1 flower \
  action mirred egress redirect dev $DEV2

$ tc_filter add dev $DEV2 ingress protocol ip prio 1 flower \
  action ct commit action goto chain 1

$ tc_filter add dev $DEV2 ingress protocol ip prio 1 chain 1 flower \
  ct_state +trk+est \
  action mirred egress redirect dev $DEV

Offload established connections, regardless of the commit flag.

Fixes: 46475bb2 ("net/sched: act_ct: Software offload of established flows")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/1622029449-27060-1-git-send-email-paulb@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Physical port name, port number attributes do not belong to virtual port
flavour. When VF or SF virtual ports are registered they incorrectly
append "np0" string in the netdevice name of the VF/SF.

Before this fix, VF netdevice name were ens2f0np0v0, ens2f0np0v1 for VF
0 and 1 respectively.

After the fix, they are ens2f0v0, ens2f0v1.

With this fix, reading /sys/class/net/ens2f0v0/phys_port_name returns
-EOPNOTSUPP.

Also devlink port show example for 2 VFs on one PF to ensure that any
physical port attributes are not exposed.

$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
pci/0000:06:00.3/196608: type eth netdev ens2f0v0 flavour virtual splittable false
pci/0000:06:00.4/262144: type eth netdev ens2f0v1 flavour virtual splittable false

This change introduces a netdevice name change on systemd/udev
version 245 and higher which honors phys_port_name sysfs file for
generation of netdevice name.

This also aligns to phys_port_name usage which is limited to switchdev
ports as described in [1].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/Documentation/networking/switchdev.rst

Fixes: acf1ee44 ("devlink: Introduce devlink port flavour virtual")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210526200027.14008-1-parav@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported memory leak [1] when adding service with
HASHED flag. We should ignore this flag both from sockopt
and netlink provided data, otherwise the service is not
hashed and not visible while releasing resources.

[1]
BUG: memory leak
unreferenced object 0xffff888115227800 (size 512):
  comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343
    [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570
    [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101
    [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435
    [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857
    [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117
    [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125
    [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
    [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...

Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull MTD fixes from Miquel Raynal:
 "MTD parsers:
   - Fix ofpart subpartitions parsing

  Raw NAND:
   - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
     sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"

* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: parsers: ofpart: fix parsing subpartitions
  mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
  mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
  mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper

Daniel Borkmann says:

====================
pull-request: bpf 2021-05-26

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).

The main changes are:

1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.

2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.

3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.

4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.

5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.

6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
MPTCP fixes

Here are a few fixes for the -net tree.

Patch 1 fixes an attempt to access a tcp-specific field that does not
exist in mptcp sockets.

Patches 2 and 3 remove warning/error log output that could be flooded.

Patch 4 performs more validation on address advertisement echo packets
to improve RFC 8684 compliance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.

Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:

 unpatched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
        ^^^ retransmission is stopped here, but 'Address Id' is 90

 patched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
        ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match

Fixes: 00cfd77b ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>