- 10 Aug, 2023 2 commits
-
-
Bryan O'Donoghue authored
Enable CAMSS on the standard RB3 as it is possible to run the test pattern generator (TPG) without any populated ports/endpoints. media-ctl --reset yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4 yavta --list /dev/v4l-subdev4 media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -p yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464 --file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2 Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230809203534.1100030-2-bryan.odonoghue@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Eric Chanudet authored
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in: https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/ Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations: commit e67b4558 ("arm64: dts: qcom: sc8280xp-crd: enable rtc") On SA8540P-ride, the register bank SDAM6 of the first PMIC is not writable. Following recommendations provided during the review, use SDAM2 from the second PMIC at offset 0xa0 instead. Reviewed-by:
Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by:
Eric Chanudet <echanude@redhat.com> Link: https://lore.kernel.org/r/20230809203506.1833205-1-echanude@redhat.comSigned-off-by:
-
- 04 Aug, 2023 3 commits
-
-
Richard Acayan authored
Add the coefficients for the CPU frequencies to aid in frequency scaling. Profiling setup: - freqbench (https://github.com/kdrag0n/freqbench) - LineageOS kernel, android_kernel_google_msm-4.9 - recommended configuration options by freqbench - disabled options that require clang or 32-bit compilers - mmc governor switched from simple_ondemand to powersave Frequency domains: cpu1 cpu6 Offline CPUs: cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 Sampling power every 1000 ms Baseline power usage: 445 mW ===== CPU 1 ===== Frequencies: 300 576 748 998 1209 1324 1516 1612 1708 300: 1114 3.7 C/MHz 43 mW 11.6 J 25.8 I/mJ 269.4 s 576: 2138 3.7 C/MHz 51 mW 7.1 J 42.2 I/mJ 140.3 s 748: 2780 3.7 C/MHz 67 mW 7.3 J 41.3 I/mJ 107.9 s 998: 3706 3.7 C/MHz 73 mW 5.9 J 51.1 I/mJ 80.9 s 1209: 4490 3.7 C/MHz 86 mW 5.7 J 52.2 I/mJ 66.8 s 1324: 4918 3.7 C/MHz 90 mW 5.5 J 54.6 I/mJ 61.0 s 1516: 5631 3.7 C/MHz 103 mW 5.5 J 54.9 I/mJ 53.3 s 1612: 5987 3.7 C/MHz 109 mW 5.5 J 55.0 I/mJ 50.1 s 1708: 6344 3.7 C/MHz 126 mW 5.9 J 50.5 I/mJ 47.3 s ===== CPU 6 ===== Frequencies: 300 652 825 979 1132 1363 1536 1747 1843 1996 300: 1868 6.2 C/MHz 53 mW 8.5 J 35.2 I/mJ 160.6 s 652: 4073 6.2 C/MHz 96 mW 7.1 J 42.4 I/mJ 73.7 s 825: 5132 6.2 C/MHz 117 mW 6.9 J 43.7 I/mJ 58.5 s 979: 6099 6.2 C/MHz 151 mW 7.4 J 40.4 I/mJ 49.2 s 1132: 7071 6.2 C/MHz 207 mW 8.8 J 34.1 I/mJ 42.4 s 1363: 8482 6.2 C/MHz 235 mW 8.3 J 36.1 I/mJ 35.4 s 1536: 9578 6.2 C/MHz 287 mW 9.0 J 33.3 I/mJ 31.3 s 1747: 10892 6.2 C/MHz 340 mW 9.4 J 32.0 I/mJ 27.6 s 1843: 11471 6.2 C/MHz 368 mW 9.6 J 31.1 I/mJ 26.2 s 1996: 12425 6.2 C/MHz 438 mW 10.6 J 28.3 I/mJ 24.2 s Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20230802011548.387519-10-mailingradian@gmail.comSigned-off-by:
-
Richard Acayan authored
Add CPU frequency scaling, and also add the corresponding memory and cache bandwidths for each frequency. Signed-off-by:
-
Richard Acayan authored
Add the interconnect node for L3 cache on SDM670. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230802011548.387519-8-mailingradian@gmail.comSigned-off-by:
-
- 03 Aug, 2023 6 commits
-
-
Marijn Suijten authored
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property. Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405. [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/Acked-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.orgSigned-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier "interleave_mode" property was never documented. Corrected bindings expect "maxim,interleave-mode" instead, which is already supported by Linux driver. Change is not compatible with older Linux kernels. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230730202051.71099-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier has only one DAI, so DAI cells can be just 0 (as expected by bindings). Signed-off-by:
-
Krzysztof Kozlowski authored
MAX98927 speaker amplifier has only one DAI, so DAI cells can be just 0 (as expected by bindings). Signed-off-by:
-
Krzysztof Kozlowski authored
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. Signed-off-by:
-
Abel Vesa authored
Even though currently there is no consumer for L1B, add the supply for it anyway. Fixes: 71342fb9 ("arm64: dts: qcom: Add base SM8550 MTP dts") Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230801095246.2884770-1-abel.vesa@linaro.orgSigned-off-by:
-
- 31 Jul, 2023 6 commits
-
-
Tengfei Fan authored
Add DTS for Qualcomm QRD platform which uses SM4450 SoC. Reviewed-by:
Tengfei Fan <quic_tengfan@quicinc.com> Link: https://lore.kernel.org/r/20230731080043.38552-5-quic_tengfan@quicinc.comSigned-off-by:
-
Tengfei Fan authored
Add based DTSI for SM4450 SoC and includes base description of CPUs and interrupt-controller which helps to boot to shell with dcc console on boards with this SoC. Reviewed-by:
-
Tengfei Fan authored
Document the SM4450 SoC binding and also the boards using it. Reviewed-by:
-
Neil Armstrong authored
Add nodes to support Type-C USB/DP functionality. On this platform, a Type-C redriver is added to the SuperSpeed graph. Signed-off-by:
-
Neil Armstrong authored
Add nodes to support Type-C USB/DP functionality. Signed-off-by:
-
Neil Armstrong authored
Add the USB3+DP Combo QMP PHY port subnodes in the SM8550 SoC DTSI to avoid duplication in the devices DTs. Reviewed-by:
-
- 28 Jul, 2023 3 commits
-
-
Zeyan Li authored
I2C6 and I2C7 use the same interrupts, which is incorrect. In the downstream kernel, I2C7 has interrupts of 608 instead of 607. Fixes: 81bee695 ("arm64: dts: qcom: sm8150: add i2c nodes") Signed-off-by:
Zeyan Li <qaz6750@outlook.com> Reviewed-by:
-
Stephan Gerhold authored
A7 seems to have external pull-up for the SD card chip detect (like most MSM8916/MSM8939 devices) so drop the internal pull-up. It's not necessary. Tested-by:
"Lin, Meng-Bo" <linmengbo0689@protonmail.com> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230723-a7sdc2cdnopull-v1-1-699fd730afcb@gerhold.netSigned-off-by:
-
Alexander Stein authored
Use id-gpios and vbus-gpios instead. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Acked-by:
-
- 22 Jul, 2023 20 commits
-
-
Krzysztof Kozlowski authored
Bindings expect the LPG node name to be "pwm": sc8180x-lenovo-flex-5g.dtb: pmic@5: 'lpg' does not match any of the regexes: Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Bindings expect the Power-on node name to be "pon": sc8180x-lenovo-flex-5g.dtb: pmic@0: 'power-on@800' does not match any of the regexes: Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
The GPIO children of PMICs should use gpio-ranges: sc8180x-primus.dtb: pmic@0: gpio@c000: 'gpio-ranges' is a required property Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
The GPIO children of PMICs should use qcom,spmi-gpio fallback: sc8180x-primus.dtb: pmic@0: gpio@c000:compatible: ['qcom,pmc8180-gpio'] is too short Fixes: d3302290 ("arm64: dts: qcom: sc8180x: Add pmics") Signed-off-by:
-
Krzysztof Kozlowski authored
Synaptics RMI4 Touchscreen bindings never defined syna,codes property for function 1a. No usage in Linux drivers. Signed-off-by:
-
Krzysztof Kozlowski authored
According to bindings and Linux driver, there is no VDDA but VIO supply. Fixes: 4ac46b36 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5") Signed-off-by:
-
Krzysztof Kozlowski authored
Interrupts extended already define a parent interrupt controller: msm8953-xiaomi-vince.dtb: touchscreen@20: Unevaluated properties are not allowed ('interrupts-parent' was unexpected) Fixes: aa17e707 ("arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi 5 Plus") Cc: <stable@vger.kernel.org> Signed-off-by: -
Mrinmay Sarkar authored
Enable pcie0, pcie1 nodes and their respective phy's. Signed-off-by:
Mrinmay Sarkar <quic_msarkar@quicinc.com> Link: https://lore.kernel.org/r/1689960276-29266-5-git-send-email-quic_msarkar@quicinc.comSigned-off-by:
-
Mrinmay Sarkar authored
Add pcie dtsi nodes for two controllers found on sa8775p platform. Signed-off-by:
-
Bjorn Andersson authored
The LLCC binding and driver was recently corrected to handle the stride varying between platforms. Switch to the new format to ensure accesses are done in the right place. Fixes: 8575f197 ("arm64: dts: qcom: Introduce the SC8180x platform") Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230612220632.1885175-1-quic_bjorande@quicinc.comSigned-off-by:
-
Bjorn Andersson authored
Following the SC8180X Primus reference design, add pmic_glink and USB Type-C wiring for battery manager, external display and orientation switching. Signed-off-by:
-
Bjorn Andersson authored
Wire up pmic_glink and the various components of USB Type-C to get battery status, orientation switching of SuperSpeed USB, as well as support for external display on the SC8180X Primus reference device. Signed-off-by:
-
Bjorn Andersson authored
Define anchors for wiring up the USB Type-C graph in the board files. Signed-off-by:
-
Devi Priya authored
Use assigned-clock-rates property for configuring the QUP I2C core clocks to operate at nominal frequency. Signed-off-by:
Devi Priya <quic_devipriy@quicinc.com> Link: https://lore.kernel.org/r/20230615084841.12375-1-quic_devipriy@quicinc.comSigned-off-by:
-
Lin, Meng-Bo authored
This dts adds support for Samsung Galaxy A7 smartphone released in 2015. Add a device tree for A7 with initial support for: - GPIO keys - Hall Sensor - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5502 MUIC) - WCNSS (WiFi/BT) - Regulators - Touch key - Accelerometer/Magnetometer - Fuelgauge - NFC - Vibrator - Touchscreen Signed-off-by:
-
Lin, Meng-Bo authored
Document samsung,a7 bindings used in its device tree. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230623100220.5284-1-linmengbo0689@protonmail.comSigned-off-by:
-
Konrad Dybcio authored
There are a couple of SoCs whose names end in "pro", with the currently- upstream examples being msm8974pro and msm8996pro. Allow such suffix in SoC-specific compatibles. Fixes: 5aa332c5 ("dt-bindings: qcom: document preferred compatible naming") Signed-off-by:
-
Lin, Meng-Bo authored
J5 and J5X use an Imagis IST3038C touchscreen that is connected to blsp_i2c5. Add it to the device tree. MFD driver for SM5703 is unavailable at the moment, which is required to power up the touchscreen on J5, so it's disabled on J5 for now. Signed-off-by:
-
Lin, Meng-Bo authored
E5, E7 and Grand Max have ST LIS2HH12 accelerometer. Add support for it. Signed-off-by:
-
Krzysztof Kozlowski authored
Add audio-related nodes: the APR in the ADSP (same as on SM8250) and LPASS TLMM pin controller. Signed-off-by:
-
