Skip to content

L
linux
Switch branch/tag
  1. 29 Mar, 2020 4 commits
  3. 11 Mar, 2020 1 commit
    • Hans de Goede's avatar
      x86: Select HARDIRQS_SW_RESEND on x86 · 17e5888e
      Hans de Goede authored 
      Modern x86 laptops are starting to use GPIO pins as interrupts more
and more, e.g. touchpads and touchscreens have almost all moved away
from PS/2 and USB to using I2C with a GPIO pin as interrupt.
Modern x86 laptops also have almost all moved to using s2idle instead
of using the system S3 ACPI power state to suspend.

The Intel and AMD pinctrl drivers do not define irq_retrigger handlers
for the irqchips they register, this is causing edge triggered interrupts
which happen while suspended using s2idle to get lost.

One specific example of this is the lid switch on some devices, lid
switches used to be handled by the embedded-controller, but now the
lid open/closed sensor is sometimes directly connected to a GPIO pin.
On most devices the ACPI code for this looks like this:

Method (_E00, ...) {
	Notify (LID0, 0x80) // Status Change
}

Where _E00 is an ACPI event handler for changes on both edges of the GPIO
connected to the lid sensor, this event handler is then combined with an
_LID method which directly reads the pin. When the device is resumed by
opening the lid, the GPIO interrupt will wake the system, but because the
pinctrl irqchip doesn't have an irq_retrigger handler, the Notify will not
happen. This is not a problem in the case the _LID method directly reads
the GPIO, because the drivers/acpi/button.c code will call _LID on resume
anyways.

But some devices have an event handler for the GPIO connected to the
lid sensor which looks like this:

Method (_E00, ...) {
	if (LID_GPIO == One)
		LIDS = One
	else
		LIDS = Zero
	Notify (LID0, 0x80) // Status Change
}

And the _LID method returns the cached LIDS value, since on open we
do not re-run the edge-interrupt handler when we re-enable IRQS on resume
(because of the missing irq_retrigger handler), _LID now will keep
reporting closed, as LIDS was never changed to reflect the open status,
this causes userspace to re-resume the laptop again shortly after opening
the lid.

The Intel GPIO controllers do not allow implementing irq_retrigger without
emulating it in software, at which point we are better of just using the
generic HARDIRQS_SW_RESEND mechanism rather then re-implementing software
emulation for this separately in aprox. 14 different pinctrl drivers.

Select HARDIRQS_SW_RESEND to solve the problem of edge-triggered GPIO
interrupts not being re-triggered on resume when they were triggered during
suspend (s2idle) and/or when they were the cause of the wakeup.

This requires

 008f1d60 ("x86/apic/vector: Force interupt handler invocation to irq context")
 c16816ac ("genirq: Add protection against unsafe usage of generic_handle_irq()")

to protect the APIC based interrupts from being wreckaged by a software
resend.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200123210242.53367-1-hdegoede@redhat.com
      17e5888e
  5. 08 Mar, 2020 9 commits
  7. 01 Mar, 2020 5 commits
  9. 29 Feb, 2020 4 commits
    • Dan Carpenter's avatar
      ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() · 37b0b6b8
      Dan Carpenter authored 
      If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: default avatarSuraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      37b0b6b8
    • Wolfram Sang's avatar
      macintosh: therm_windtunnel: fix regression when instantiating devices · 38b17afb
      Wolfram Sang authored 
      Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: default avatarErhard Furtner <erhard_f@mailbox.org>
Tested-by: default avatarErhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
      38b17afb
    • Qian Cai's avatar
      jbd2: fix data races at struct journal_head · 6c5d9112
      Qian Cai authored 
      journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarQian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      6c5d9112
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 7557c1b3
      Linus Torvalds authored 
      Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID
      7557c1b3
  11. 28 Feb, 2020 17 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7