- 24 May, 2023 2 commits
-
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230523021943.2406847-1-azeemshaikh38@gmail.com
-
Artur Weber authored
Fixes compilation issues with older GCC versions and Clang after changes introduced in commit 6810bb39 ("drm/panel: Add Samsung S6D7AA0 panel controller driver"). Tested with GCC 13.1.1, GCC 6.4.0 and Clang 16.0.3. Fixes the following errors with Clang: drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_lsl080al02_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_lsl080al03_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_ltl101at01_mode, ^~~~~~~~~~~~~~~~~~~~~~~ 3 errors generated. Fixes the following errors with GCC: drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not constant .drm_mode = s6d7aa0_lsl080al02_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: note: (near initialization for 's6d7aa0_lsl080al02_desc.drm_mode') drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not constant .drm_mode = s6d7aa0_lsl080al03_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: note: (near initialization for 's6d7aa0_lsl080al03_desc.drm_mode') drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not constant .drm_mode = s6d7aa0_ltl101at01_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: note: (near initialization for 's6d7aa0_ltl101at01_desc.drm_mode') Reported-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/lkml/20230523180212.GA1401867@dev-arch.thelio-3990XReported-by:
kernelci.org bot <bot@kernelci.org> Link: https://lore.kernel.org/llvm/646c6def.a70a0220.58c1a.903d@mx.google.com Fixes: 6810bb39 ("drm/panel: Add Samsung S6D7AA0 panel controller driver") Signed-off-by:
Artur Weber <aweber.kernel@gmail.com> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
- 23 May, 2023 4 commits
-
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Nícolas F. R. A. Prado authored
During probe, the driver registers i2c dummy devices and populates the aux bus, which registers a device for the panel. After doing that, the driver can still defer probe if needed. This ordering of operations is troublesome however, because the deferred probe work will retry probing all pending devices every time a new device is registered. Therefore, if modules need to be loaded in order to satisfy the dependencies for this driver to complete probe, the kernel will stall, since it'll keep trying to probe the anx7625 driver, but never succeed, given that modules would only be loaded after the deferred probe work completes. Two changes are required to avoid this issue: * Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before anx7625_register_i2c_dummy_clients() and devm_of_dp_aux_populate_ep_devices(), which register devices. * Make use of the done_probing callback when populating the aux bus, so that the bridge registration is only done after the panel is probed. This is required because the panel might need to defer probe, but the aux bus population needs the i2c dummy devices working, so this call couldn't just be moved to an earlier point in probe. One caveat is that if the panel is described outside the aux bus, the probe loop issue can still happen, but we don't have a way to avoid it in that case since there's no callback available. With this patch applied, it's possible to boot on mt8192-asurada-spherion with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=m CONFIG_BACKLIGHT_PWM=y and also with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=y CONFIG_BACKLIGHT_PWM=m Fixes: adca62ec ("drm/bridge: anx7625: Support reading edid through aux channel") Fixes: 26933299 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found") Reported-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
-
Thomas Zimmermann authored
The fbdev framebuffer is in system memory. Store the address in the field 'screen_buffer'. Fixes the following sparse warning. ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: warning: incorrect type in assignment (different address spaces) ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: expected char [noderef] __iomem *screen_base ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: got void * Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522191701.13406-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
The fbdev framebuffer is I/O memory, so clear it with fb_memset_io(). Fixes the following sparse warning: ../drivers/gpu/drm/gma500/fbdev.c:234:20: warning: incorrect type in argument 1 (different address spaces) ../drivers/gpu/drm/gma500/fbdev.c:234:20: expected void *s ../drivers/gpu/drm/gma500/fbdev.c:234:20: got char [noderef] __iomem *screen_base Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522190637.7039-1-tzimmermann@suse.de
-
- 22 May, 2023 8 commits
-
-
Tom Rix authored
smatch reports drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c:49:1: warning: symbol 'ga102_gsps' was not declared. Should it be static? This variable is only used in its defining file, so it should be static Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
nv50_display_create() is declared in another header, along with a couple of declarations that are now outdated: drivers/gpu/drm/nouveau/dispnv50/disp.c:2517:1: error: no previous prototype for 'nv50_display_create' Fixes: ba801ef0 ("drm/nouveau/kms: display destroy/init/fini hooks can be static") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Marek Vasut authored
Implement support for DSI clock and data lane DN/DP polarity swap by means of decoding 'lane-polarities' DT property. The controller does support DN/DP swap of clock lane and all data lanes, the controller does not support polarity swap of individual data lane bundles, add a check which verifies all data lanes have the same polarity. This has been validated on an imx8mm board that actually has the MIPI DSI clock lanes inverted. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Fabio Estevam authored
The Samsung DSIM IP block allows the inversion of the clock and data lanes. Add an optional property called 'lane-polarities' that describes the polarities of the MIPI DSI clock and data lanes. This property is useful for properly describing the hardware when the board designer decided to switch the polarities of the MIPI DSI clock and/or data lanes. Signed-off-by:
-
Artur Weber authored
Add myself as maintainer of the Samsung S6D7AA0 panel driver. Signed-off-by:
-
Artur Weber authored
Initial driver for S6D7AA0-controlled panels. Currently, the following panels are supported: - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0) - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015) - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015) It should be possible to extend this driver to work with other panels using this IC. Tested-by: Nikita Travkin <nikita@trvn.ru> #ltl101at01 Signed-off-by:
-
Artur Weber authored
Add bindings for the S6D7AA0 LCD panel controller, including the S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family of tablets, and the S6D7AA0-LSL080AL03 and S6D7AA0-LTL101AT01 panels used in the Samsung Galaxy Tab A 8.0 and 9.7 2015. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
- 19 May, 2023 2 commits
-
-
Luben Tuikov authored
Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be queued to the underlying hardware. This distinction is important to make, since the wake conditional in the GPU scheduler thread wakes up when other conditions are also true, e.g. when there are jobs to be cleaned. For instance, a user might want to wake up the scheduler only because there are more jobs to clean, but whether we can queue more jobs is irrelevant. v2: Separate "canqueue" to "can_queue". (Alex D.) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.comReviewed-by:
Alex Deucher <Alexander.Deucher@amd.com>
-
Luben Tuikov authored
Rename drm_sched_ready() to drm_sched_can_queue(). "ready" can mean many things and is thus meaningless in this context. Instead, rename to a name which precisely conveys what is being checked. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
- 18 May, 2023 7 commits
-
-
Thomas Zimmermann authored
Update the names of the fb_mem*() helpers to be consistent with their regular counterparts. Hence, fb_memset() now becomes fb_memset_io(), fb_memcpy_fromfb() now becomes fb_memcpy_fromio() and fb_memcpy_tofb() becomes fb_memcpy_toio(). No functional changes. v6: * update new file fb_io_fops.c Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Implement framebuffer I/O helpers, such as fb_read*() and fb_write*(), in the architecture's <asm/fb.h> header file or the generic one. The common case has been the use of regular I/O functions, such as __raw_readb() or memset_io(). A few architectures used plain system- memory reads and writes. Sparc used helpers for its SBus. The architectures that used special cases provide the same code in their __raw_*() I/O helpers. So the patch replaces this code with the __raw_*() functions and moves it to <asm-generic/fb.h> for all architectures. v8: * remove garbage after commit-message tags v6: * fix fb_readq()/fb_writeq() on 64-bit mips (kernel test robot) v5: * include <linux/io.h> in <asm-generic/fb>; fix s390 build v4: * ia64, loongarch, sparc64: add fb_mem*() to arch headers to keep current semantics (Arnd) v3: * implement all architectures with generic helpers * support reordering and native byte order (Geert, Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Replace include statements for <asm/fb.h> with <linux/fb.h>. Fixes the coding style: if a header is available in asm/ and linux/, it is preferable to include the header from linux/. This only affects a few source files, most of which already include <linux/fb.h>. Suggested-by:
-
Thomas Zimmermann authored
The code uses writel() and similar I/O-memory helpers. Include the header file to get the declarations. Signed-off-by:
-
Thomas Zimmermann authored
The code uses readl() and writel(). Include the header file to get the declarations. Signed-off-by:
-
Thomas Zimmermann authored
Fix coding style. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Cast I/O offsets to pointers to use them with I/O functions. The I/O functions expect pointers of type 'volatile void __iomem *', but the offsets are plain integers. Build warnings are ../drivers/video/fbdev/hitfb.c: In function 'hitfb_accel_wait': ../arch/x86/include/asm/hd64461.h:18:33: warning: passing argument 1 of 'fb_readw' makes pointer from integer without a cast [-Wint-conversion] 18 | #define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x)) | ^~~~~~~~~~~~~~~~~~~~~~ | | | unsigned int ../arch/x86/include/asm/hd64461.h:93:33: note: in expansion of macro 'HD64461_IO_OFFSET' 93 | #define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */ | ^~~~~~~~~~~~~~~~~ ../drivers/video/fbdev/hitfb.c:47:25: note: in expansion of macro 'HD64461_GRCFGR' 47 | while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ; | ^~~~~~~~~~~~~~ In file included from ../arch/x86/include/asm/fb.h:15, from ../include/linux/fb.h:19, from ../drivers/video/fbdev/hitfb.c:22: ../include/asm-generic/fb.h:52:57: note: expected 'const volatile void *' but argument is of type 'unsigned int' 52 | static inline u16 fb_readw(const volatile void __iomem *addr) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ This patch only fixes the build warnings. It's not clear if the I/O offsets can legally be passed to the I/O helpers. It was apparently broken in 2007 when custom inw()/outw() helpers got removed by commit 34a780a0 ("sh: hp6xx pata_platform support."). Fixing the driver would require setting the I/O base address. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305102136.eMjTSPwH-lkp@intel.com/Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-2-tzimmermann@suse.de
-
- 17 May, 2023 3 commits
-
-
Alexander Stein authored
DSI device registering and attaching needs to be undone upon deregistration. This fixes module unload/load. Fixes: bbfd3190 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
Jani Nikula authored
Make the struct ttm_device_funcs pointers const so the data can be placed in rodata. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Sui Jingfeng authored
Signed-off-by:
-
- 16 May, 2023 4 commits
-
-
Cong Yang authored
There is a problem of screen shake on the old panel. So increase the panel GOP component pull-down circuit size in hardware, and update the initialization code at the same time. The new initialization code mainly modifles the following. a)adjusted for GOP timing. When Display sleep in, raise all GOP signals to VGHO and then drop to GND. b)Increased the Vertical back Porch and Vertical pulse width, so need to update vsync_end and vtotal and CLK in drm_display_mode. Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> [dianders: fixed spelling mistake in subject] Signed-off-by:
-
Francesco Dolcini authored
Remove unneeded stray semicolon. Reported-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
-
Anup Sharma authored
There is no need to exclusively set the .owner member of the struct device_driver when defining the platform_driver struct. The Linux core takes care of setting the .owner member as part of the call to module_platform_driver() helper function. Issue identified using the platform_no_drv_owner.cocci Coccinelle semantic patch as: drivers/gpu/drm/bridge/samsung-dsim.c:1957:6-11: No need to set .owner here. The core will do it. No functional changes are intended. Signed-off-by:
Anup Sharma <anupnewsmail@gmail.com> Reviewed-by:
-
Marek Vasut authored
The TC358867/TC9595 devices are compatible with the predecessor TC358767. Document compatible strings for the new devices, so they can be discerned in board DTs. Update the title to match description in the process. Signed-off-by:
-
- 15 May, 2023 6 commits
-
-
Maíra Canal authored
Currently, the pixel conversion isn't rounding the fixed-point values before assigning it to the RGB coefficients, which is causing the IGT pixel-format tests to fail. So, use the drm_fixp2int_round() fixed-point helper to round the values when assigning it to the RGB coefficients. Tested with igt@kms_plane@pixel-format and igt@kms_plane@pixel-format-source-clamping. [v2]: * Use drm_fixp2int_round() to fix the pixel conversion instead of casting the values to s32 (Melissa Wen). Fixes: 89b03aea ("drm/vkms: fix 32bit compilation error by replacing macros") Signed-off-by:Maíra Canal <mcanal@igalia.com> Reviewed-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-2-mcanal@igalia.com
-
Maíra Canal authored
Create a new fixed-point helper to allow us to return the rounded value of our fixed point value. [v2]: * Create the function drm_fixp2int_round() (Melissa Wen). [v3]: * Use drm_fixp2int() instead of shifting manually (Arthur Grillo). Signed-off-by: -
Shuijing Li authored
For "boe,tv105wum-nw0" this special panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Signed-off-by:
Shuijing Li <shuijing.li@mediatek.com> Signed-off-by:
Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Shuijing Li authored
Reduce the delay after LCM reset by removing an extra delay in the initialization commands array. The required delay of at least 6ms after reset is guaranteed by boe_panel_prepare(). Signed-off-by:
-
Javier Martinez Canillas authored
This is a leftover from an early iteration of the driver when it was still named ssd1307 instead of ssd130x. Change it for consistency with the rest. Signed-off-by:
-
Huacai Chen authored
Consider a configuration like this: 1, efifb (or simpledrm) is built-in; 2, a native display driver (such as radeon) is also built-in. As Javier said, this is not a common configuration (the native display driver is usually built as a module), but it can happen and cause some trouble. In this case, since efifb, radeon and sysfb are all in device_initcall() level, the order in practise is like this: efifb registered at first, but no "efi-framebuffer" device yet. radeon registered later, and /dev/fb0 created. sysfb_init() comes at last, it registers "efi-framebuffer" and then causes an error message "efifb: a framebuffer is already registered". Make sysfb_init() to be subsys_ initcall_sync() can avoid this. And Javier Martinez Canillas is trying to make a more general solution in commit 873eb3b1 ("fbdev: Disable sysfb device registration when removing conflicting FBs"). However, this patch still makes sense because it can make the screen display as early as possible (We cannot move to subsys_initcall, since sysfb_init() should be executed after PCI enumeration). Reviewed-by:
Huacai Chen <chenhuacai@loongson.cn> Signed-off-by:
-
- 11 May, 2023 4 commits
-
-
Liu Ying authored
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel support. The panel has a LVDS display interface. The panel's product specification can be found at: http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdfSigned-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
Liu Ying authored
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel compatible string. The panel has a LVDS display interface. The panel's product specification can be found at: http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdfAcked-by:
-
Dmitry Baryshkov authored
Drop sharp_nt_panel_disable() and sharp_nt_panel_enable(), which bear no useful code. Also drop sharp_nt_panel::enable and sharp_nt_panel::mode fields which also provide no use now. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Using current settings causes panel flickering on APQ8074 dragonboard. Adjust panel settings to follow the vendor-provided mode. This also enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the vendor dtsi for the mentioned dragonboard. Fixes: ee017238 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel") Signed-off-by:
-
