- 24 Apr, 2018 8 commits
-
-
Eric Biggers authored
commit 3f05317d upstream. syzbot reported a use-after-free of shm_file_data(file)->file->f_op in shm_get_unmapped_area(), called via sys_remap_file_pages(). Unfortunately it couldn't generate a reproducer, but I found a bug which I think caused it. When remap_file_pages() is passed a full System V shared memory segment, the memory is first unmapped, then a new map is created using the ->vm_file. Between these steps, the shm ID can be removed and reused for a new shm segment. But, shm_mmap() only checks whether the ID is currently valid before calling the underlying file's ->mmap(); it doesn't check whether it was reused. Thus it can use the wrong underlying file, one that was already freed. Fix this by making the "outer" shm file (the one that gets put in ->vm_file) hold a reference to the real shm file, and by making __shm_open() require that the file associated with the shm ID matches the one associated with the "outer" file. Taking the reference to the real shm file is needed to fully solve the problem, since otherwise sfd->file could point to a freed file, which then could be reallocated for the reused shm ID, causing the wrong shm segment to be mapped (and without the required permission checks). Commit 1ac0b6de ("ipc/shm: handle removed segments gracefully in shm_mmap()") almost fixed this bug, but it didn't go far enough because it didn't consider the case where the shm ID is reused. The following program usually reproduces this bug: #include <stdlib.h> #include <sys/shm.h> #include <sys/syscall.h> #include <unistd.h> int main() { int is_parent = (fork() != 0); srand(getpid()); for (;;) { int id = shmget(0xF00F, 4096, IPC_CREAT|0700); if (is_parent) { void *addr = shmat(id, NULL, 0); usleep(rand() % 50); while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0)); } else { usleep(rand() % 50); shmctl(id, IPC_RMID, NULL); } } } It causes the following NULL pointer dereference due to a 'struct file' being used while it's being freed. (I couldn't actually get a KASAN use-after-free splat like in the syzbot report. But I think it's possible with this bug; it would just take a more extraordinary race...) BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 258 Comm: syz_ipc Not tainted 4.16.0-05140-gf8cf2f16 #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 RIP: 0010:d_inode include/linux/dcache.h:519 [inline] RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724 [...] Call Trace: file_accessed include/linux/fs.h:2063 [inline] shmem_mmap+0x25/0x40 mm/shmem.c:2149 call_mmap include/linux/fs.h:1789 [inline] shm_mmap+0x34/0x80 ipc/shm.c:465 call_mmap include/linux/fs.h:1789 [inline] mmap_region+0x309/0x5b0 mm/mmap.c:1712 do_mmap+0x294/0x4a0 mm/mmap.c:1483 do_mmap_pgoff include/linux/mm.h:2235 [inline] SYSC_remap_file_pages mm/mmap.c:2853 [inline] SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769 do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ebiggers@google.com: add comment] Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com Fixes: c8d78c18 ("mm: replace remap_file_pages() syscall with emulation") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 60bb83b8 upstream. We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid PCI resource assigned after reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4 ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check of the newly calculated resource for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de Fixes: 23c570a6 ("resource: ability to resize an allocated resource") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reported-by:
Michael Henders <hendersm@shaw.ca> Tested-by:
-
Andrew Morton authored
commit 9ad553ab upstream. One use of the reiserfs_warning() macro in journal_init_dev() is missing a parameter, causing the following warning: REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev: This also causes a WARN_ONCE() warning in the vsprintf code, and then a panic if panic_on_warn is set. Please remove unsupported %/ in format string WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138 Kernel panic - not syncing: panic_on_warn set ... Just add another string argument to the macro invocation. Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718 Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com> Tested-by:
Jeff Mahoney <jeffm@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Richard Weinberger authored
commit b5094b7f upstream. While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by:
-
Romain Izard authored
commit 78a8dfba upstream. When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a3 (UBI: R/O block driver on top of UBI volumes) Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit 29b7a6fa upstream. At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by:
Martin Townsend <mtownsend1973@gmail.com> Fixes: 74cdaf24 ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit aac17948 upstream. If ubifs_wbuf_sync() fails we must not write a master node with the dirty marker cleared. Otherwise it is possible that in case of an IO error while syncing we mark the filesystem as clean and UBIFS refuses to recover upon next mount. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Tejun Heo authored
commit 28b0f8a6 upstream. A tty is hung up by __tty_hangup() setting file->f_op to hung_up_tty_fops, which is skipped on ttys whose write operation isn't tty_write(). This means that, for example, /dev/console whose write op is redirected_tty_write() is never actually marked hung up. Because n_tty_read() uses the hung up status to decide whether to abort the waiting readers, the lack of hung-up marking can lead to the following scenario. 1. A session contains two processes. The leader and its child. The child ignores SIGHUP. 2. The leader exits and starts disassociating from the controlling terminal (/dev/console). 3. __tty_hangup() skips setting f_op to hung_up_tty_fops. 4. SIGHUP is delivered and ignored. 5. tty_ldisc_hangup() is invoked. It wakes up the waits which should clear the read lockers of tty->ldisc_sem. 6. The reader wakes up but because tty_hung_up_p() is false, it doesn't abort and goes back to sleep while read-holding tty->ldisc_sem. 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup() and is now stuck in D sleep indefinitely waiting for tty->ldisc_sem. The following is Alan's explanation on why some ttys aren't hung up. http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop 1. It broke the serial consoles because they would hang up and close down the hardware. With tty_port that *should* be fixable properly for any cases remaining. 2. The console layer was (and still is) completely broken and doens't refcount properly. So if you turn on console hangups it breaks (as indeed does freeing consoles and half a dozen other things). As neither can be fixed quickly, this patch works around the problem by introducing a new flag, TTY_HUPPING, which is used solely to tell n_tty_read() that hang-up is in progress for the console and the readers should be aborted regardless of the hung-up status of the device. The following is a sample hung task warning caused by this issue. INFO: task agetty:2662 blocked for more than 120 seconds. Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 0 2662 1 0x00000086 Call Trace: __schedule+0x267/0x890 schedule+0x36/0x80 schedule_timeout+0x23c/0x2e0 ldsem_down_write+0xce/0x1f6 tty_ldisc_lock+0x16/0x30 tty_ldisc_hangup+0xb3/0x1b0 __tty_hangup+0x300/0x410 disassociate_ctty+0x6c/0x290 do_exit+0x7ef/0xb00 do_group_exit+0x3f/0xa0 get_signal+0x1b3/0x5d0 do_signal+0x28/0x660 exit_to_usermode_loop+0x46/0x86 do_syscall_64+0x9c/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 The following is the repro. Run "$PROG /dev/console". The parent process hangs in D state. #include <sys/types.h> #include <sys/stat.h> #include <sys/wait.h> #include <sys/ioctl.h> #include <fcntl.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <signal.h> #include <time.h> #include <termios.h> int main(int argc, char **argv) { struct sigaction sact = { .sa_handler = SIG_IGN }; struct timespec ts1s = { .tv_sec = 1 }; pid_t pid; int fd; if (argc < 2) { fprintf(stderr, "test-hung-tty /dev/$TTY\n"); return 1; } /* fork a child to ensure that it isn't already the session leader */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { /* top parent, wait for everyone */ while (waitpid(-1, NULL, 0) >= 0) ; if (errno != ECHILD) perror("waitpid"); return 0; } /* new session, start a new session and set the controlling tty */ if (setsid() < 0) { perror("setsid"); return 1; } fd = open(argv[1], O_RDWR); if (fd < 0) { perror("open"); return 1; } if (ioctl(fd, TIOCSCTTY, 1) < 0) { perror("ioctl"); return 1; } /* fork a child, sleep a bit and exit */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { nanosleep(&ts1s, NULL); printf("Session leader exiting\n"); exit(0); } /* * The child ignores SIGHUP and keeps reading from the controlling * tty. Because SIGHUP is ignored, the child doesn't get killed on * parent exit and the bug in n_tty makes the read(2) block the * parent's control terminal hangup attempt. The parent ends up in * D sleep until the child is explicitly killed. */ sigaction(SIGHUP, &sact, NULL); printf("Child reading tty\n"); while (1) { char buf[1024]; if (read(fd, buf, sizeof(buf)) < 0) { perror("read"); return 1; } } return 0; } Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: stable@vger.kernel.org Signed-off-by:
-
- 20 Apr, 2018 32 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit d7ba3c00 which was commit 79e498a9 upstream. Turns out it breaks things, so drop it. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@microsoft.com> Cc: Dan Rue <dan.rue@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 91b2d344 upstream. The arm64 futex code has some explicit dereferencing of user pointers where performing atomic operations in response to a futex command. This patch uses masking to limit any speculative futex operations to within the user address space. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport] Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 4bfc3380 ] lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit d14d2b78 ] Commit d65026c6 ("vhost: validate log when IOTLB is enabled") introduced a regression. The logic was originally: if (vq->iotlb) return 1; return A && B; After the patch the short-circuit logic for A was inverted: if (A || vq->iotlb) return A; return B; This patch fixes the regression by rewriting the checks in the obvious way, no longer returning A when vq->iotlb is non-NULL (which is hard to understand). Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Tejaswi Tanikella authored
[ Upstream commit 3f01ddb9 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468 89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198 89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370 89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250 89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60 89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154 89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by:
Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by:
-
Ka-Cheong Poon authored
[ Upstream commit a43cced9 ] rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to send a message. Suppose the RDS connection is not yet up. In rds_send_mprds_hash(), it does if (conn->c_npaths == 0) wait_event_interruptible(conn->c_hs_waitq, (conn->c_npaths != 0)); If it is interrupted before the connection is set up, rds_send_mprds_hash() will return a non-zero hash value. Hence rds_sendmsg() will use a non-zero c_path to send the message. But if the RDS connection ends up to be non-MP capable, the message will be lost as only the zero c_path can be used. Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Bassem Boubaker authored
[ Upstream commit 53765341 ] The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by:
Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Marek Szyprowski authored
commit 0c4c5860 upstream. Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> [backport to v4.4.y/v4.9.y: context changes] Signed-off-by:
-
Sudhir Sreedharan authored
commit 7972326a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by:
Sudhir Sreedharan <ssreedharan@mvista.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Szymon Janc authored
commit 082f2300 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
commit 30ce4d19 upstream. missed it in "kill struct filename.separate" several years ago. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Vasily Gorbik authored
commit 15deb080 upstream. When loadparm is set in reipl parm block, the kernel should also set DIAG308_FLAGS_LP_VALID flag. This fixes loadparm ignoring during z/VM fcp -> ccw reipl and kvm direct boot -> ccw reipl. Cc: <stable@vger.kernel.org> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit 0cf1e051 upstream. On an Output queue, both EMPTY and PENDING buffer states imply that the buffer is ready for completion-processing by the upper-layer drivers. So for a non-QEBSM Output queue, get_buf_states() merges mixed batches of PENDING and EMPTY buffers into one large batch of EMPTY buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING from EMPTY by inspecting the slsb_state for QDIO_OUTBUF_STATE_FLAG_PENDING. But the merge logic in get_buf_states() contains a bug that causes us to erronously also merge ERROR buffers into such a batch of EMPTY buffers (ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY). Effectively, most outbound ERROR buffers are currently discarded silently and processed as if they had succeeded. Note that this affects _all_ non-QEBSM device types, not just IQD with CQ. Fix it by explicitly spelling out the exact conditions for merging. For extracting the "get initial state" part out of the loop, this relies on the fact that get_buf_states() is never called with a count of 0. The QEBSM path already strictly requires this, and the two callers with variable 'count' make sure of it. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit dae55b6f upstream. Immediate retry of EQBS after CCQ 96 means that we potentially misreport the state of buffers inspected during the first EQBS call. This occurs when 1. the first EQBS finds all inspected buffers still in the initial state set by the driver (ie INPUT EMPTY or OUTPUT PRIMED), 2. the EQBS terminates early with CCQ 96, and 3. by the time that the second EQBS comes around, the state of those previously inspected buffers has changed. If the state reported by the second EQBS is 'driver-owned', all we know is that the previous buffers are driver-owned now as well. But we can't tell if they all have the same state. So for instance - the second EQBS reports OUTPUT EMPTY, but any number of the previous buffers could be OUTPUT ERROR by now, - the second EQBS reports OUTPUT ERROR, but any number of the previous buffers could be OUTPUT EMPTY by now. Effectively, this can result in both over- and underreporting of errors. If the state reported by the second EQBS is 'HW-owned', that doesn't guarantee that the previous buffers have not been switched to driver-owned in the mean time. So for instance - the second EQBS reports INPUT EMPTY, but any number of the previous buffers could be INPUT PRIMED (or INPUT ERROR) by now. This would result in failure to process pending work on the queue. If it's the final check before yielding initiative, this can cause a (temporary) queue stall due to IRQ avoidance. Fixes: 25f269f1 ("[S390] qdio: EQBS retry after CCQ 96") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
-
Dan Williams authored
commit 8d0d8ed3 upstream. Commit 1cf03c00 "nfit: scrub and register regions in a workqueue" mistakenly attempts to register a region per BLK aperture. There is nothing to register for individual apertures as they belong as a set to a BLK aperture group that are registered with a corresponding DIMM-control-region. Filter them for registration to prevent some needless devm_kzalloc() allocations. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00 ("nfit: scrub and register regions in a workqueue") Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Tetsuo Handa authored
commit 1e047eaa upstream. syzbot is reporting deadlocks at __blkdev_get() [1]. ---------------------------------------- [ 92.493919] systemd-udevd D12696 525 1 0x00000000 [ 92.495891] Call Trace: [ 92.501560] schedule+0x23/0x80 [ 92.502923] schedule_preempt_disabled+0x5/0x10 [ 92.504645] __mutex_lock+0x416/0x9e0 [ 92.510760] __blkdev_get+0x73/0x4f0 [ 92.512220] blkdev_get+0x12e/0x390 [ 92.518151] do_dentry_open+0x1c3/0x2f0 [ 92.519815] path_openat+0x5d9/0xdc0 [ 92.521437] do_filp_open+0x7d/0xf0 [ 92.527365] do_sys_open+0x1b8/0x250 [ 92.528831] do_syscall_64+0x6e/0x270 [ 92.530341] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.931922] 1 lock held by systemd-udevd/525: [ 92.933642] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0 ---------------------------------------- The reason of deadlock turned out that wait_event_interruptible() in blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put() due to q->mq_freeze_depth == 1. ---------------------------------------- [ 92.787172] a.out S12584 634 633 0x80000002 [ 92.789120] Call Trace: [ 92.796693] schedule+0x23/0x80 [ 92.797994] blk_queue_enter+0x3cb/0x540 [ 92.803272] generic_make_request+0xf0/0x3d0 [ 92.807970] submit_bio+0x67/0x130 [ 92.810928] submit_bh_wbc+0x15e/0x190 [ 92.812461] __block_write_full_page+0x218/0x460 [ 92.815792] __writepage+0x11/0x50 [ 92.817209] write_cache_pages+0x1ae/0x3d0 [ 92.825585] generic_writepages+0x5a/0x90 [ 92.831865] do_writepages+0x43/0xd0 [ 92.836972] __filemap_fdatawrite_range+0xc1/0x100 [ 92.838788] filemap_write_and_wait+0x24/0x70 [ 92.840491] __blkdev_put+0x69/0x1e0 [ 92.841949] blkdev_close+0x16/0x20 [ 92.843418] __fput+0xda/0x1f0 [ 92.844740] task_work_run+0x87/0xb0 [ 92.846215] do_exit+0x2f5/0xba0 [ 92.850528] do_group_exit+0x34/0xb0 [ 92.852018] SyS_exit_group+0xb/0x10 [ 92.853449] do_syscall_64+0x6e/0x270 [ 92.854944] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.943530] 1 lock held by a.out/634: [ 92.945105] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0 ---------------------------------------- The reason of q->mq_freeze_depth == 1 turned out that loop_set_status() forgot to call blk_mq_unfreeze_queue() at error paths for info->lo_encrypt_type != NULL case. ---------------------------------------- [ 37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G W 4.16.0+ #457 [ 37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40 [ 37.521778] RSP: 0018:ffffb0c2013e7c60 EFLAGS: 00010246 [ 37.524078] RAX: 0000000000000000 RBX: ffff8b07b1519798 RCX: 0000000000000000 [ 37.527015] RDX: 0000000000000002 RSI: ffffb0c2013e7cc0 RDI: ffff8b07b1519798 [ 37.529934] RBP: ffffb0c2013e7cc0 R08: 0000000000000008 R09: 47a189966239b898 [ 37.532684] R10: dad78b99b278552f R11: 9332dca72259d5ef R12: ffff8b07acd73678 [ 37.535452] R13: 0000000000004c04 R14: 0000000000000000 R15: ffff8b07b841e940 [ 37.538186] FS: 00007fede33b9740(0000) GS:ffff8b07b8e80000(0000) knlGS:0000000000000000 [ 37.541168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.543590] CR2: 00000000206fdf18 CR3: 0000000130b30006 CR4: 00000000000606e0 [ 37.546410] Call Trace: [ 37.547902] blk_freeze_queue+0x9/0x30 [ 37.549968] loop_set_status+0x67/0x3c0 [loop] [ 37.549975] loop_set_status64+0x3b/0x70 [loop] [ 37.549986] lo_ioctl+0x223/0x810 [loop] [ 37.549995] blkdev_ioctl+0x572/0x980 [ 37.550003] block_ioctl+0x34/0x40 [ 37.550006] do_vfs_ioctl+0xa7/0x6d0 [ 37.550017] ksys_ioctl+0x6b/0x80 [ 37.573076] SyS_ioctl+0x5/0x10 [ 37.574831] do_syscall_64+0x6e/0x270 [ 37.576769] entry_SYSCALL_64_after_hwframe+0x42/0xb7 ---------------------------------------- [1] https://syzkaller.appspot.com/bug?id=cd662bc3f6022c0979d01a262c318fab2ee9b56fSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com> Fixes: ecdd0959 ("block/loop: fix race between I/O and set_status") Cc: Ming Lei <tom.leiming@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 7525a238 which is commit 94df1040 upstream. It breaks the build of perf on 4.9.y, so I'm dropping it. Reported-by:
Pavlos Parissis <pavlos.parissis@gmail.com> Reported-by:
Lei Chen <chenl.lei@gmail.com> Reported-by:
Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Eric Biggers authored
commit f3aefb6a upstream. make_checksum_hmac_md5() is allocating an HMAC transform and doing crypto API calls in the following order: crypto_ahash_init() crypto_ahash_setkey() crypto_ahash_digest() This is wrong because it makes no sense to init() the request before a key has been set, given that the initial state depends on the key. And digest() is short for init() + update() + final(), so in this case there's no need to explicitly call init() at all. Before commit 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") the extra init() had no real effect, at least for the software HMAC implementation. (There are also hardware drivers that implement HMAC-MD5, and it's not immediately obvious how gracefully they handle init() before setkey().) But now the crypto API detects this incorrect initialization and returns -ENOKEY. This is breaking NFS mounts in some cases. Fix it by removing the incorrect call to crypto_ahash_init(). Reported-by:
Michael Young <m.a.young@durham.ac.uk> Fixes: 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") Fixes: fffdaef2 ("gss_krb5: Add support for rc4-hmac encryption") Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 3a0a397f upstream. Now that we've standardised on SMCCC v1.1 to perform the branch prediction invalidation, let's drop the previous band-aid. If vendors haven't updated their firmware to do SMCCC 1.1, they haven't updated PSCI either, so we don't loose anything. Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit b092201e upstream. Add the detection and runtime code for ARM_SMCCC_ARCH_WORKAROUND_1. It is lovely. Really. Tested-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit f2d3b2e8 upstream. One of the major improvement of SMCCC v1.1 is that it only clobbers the first 4 registers, both on 32 and 64bit. This means that it becomes very easy to provide an inline version of the SMC call primitive, and avoid performing a function call to stash the registers that would otherwise be clobbered by SMCCC v1.0. Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Tested-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit ded4c39e upstream. Function identifiers are a 32bit, unsigned quantity. But we never tell so to the compiler, resulting in the following: 4ac: b26187e0 mov x0, #0xffffffff80000001 We thus rely on the firmware narrowing it for us, which is not always a reasonable expectation. Cc: stable@vger.kernel.org Reported-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit e78eef55 upstream. Since PSCI 1.0 allows the SMCCC version to be (indirectly) probed, let's do that at boot time, and expose the version of the calling convention as part of the psci_ops structure. Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 09a8d6d4 upstream. In order to call into the firmware to apply workarounds, it is useful to find out whether we're using HVC or SMC. Let's expose this through the psci_ops. Acked-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit f72af90c upstream. We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible. So let's intercept it as early as we can by testing for the function call number as soon as we've identified a HVC call coming from the guest. Tested-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 6167ec5c upstream. A new feature of SMCCC 1.1 is that it offers firmware-based CPU workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides BP hardening for CVE-2017-5715. If the host has some mitigation for this issue, report that we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the host workaround on every guest exit. Tested-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit a4097b35 upstream. We're about to need kvm_psci_version in HYP too. So let's turn it into a static inline, and pass the kvm structure as a second parameter (so that HYP can do a kern_hyp_va on it). Tested-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 90348689 upstream. For those CPUs that require PSCI to perform a BP invalidation, going all the way to the PSCI code for not much is a waste of precious cycles. Let's terminate that call as early as possible. Signed-off-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 09e6be12 upstream. The new SMC Calling Convention (v1.1) allows for a reduced overhead when calling into the firmware, and provides a new feature discovery mechanism. Make it visible to KVM guests. Tested-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 58e0b223 upstream. PSCI 1.0 can be trivially implemented by providing the FEATURES call on top of PSCI 0.2 and returning 1.0 as the PSCI version. We happily ignore everything else, as they are either optional or are clarifications that do not require any additional change. PSCI 1.0 is now the default until we decide to add a userspace selection API. Reviewed-by:
-
Mark Rutland authored
From: Marc Zyngier <marc.zyngier@arm.com> commit 84684fec upstream. Instead of open coding the accesses to the various registers, let's add explicit SMCCC accessors. Reviewed-by:
-
