This configuration variable is set in the make file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

This driver uses RX skb's of O(2), thus it is possible for memory fragmentation
to prevent the allocation of a new one to replace a newly-received buffer.
When such a failure occurs, the kernel panics.

The fix is to drop an incoming packet whenever such an allocation fails. This
fix matches the one done in rtlwifi for other Realtek PCI devices.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

One too many lines were removed in an earlier patch. Rather than resubmit
as a V2, this line is added back here.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Now that the code can only generate a driver for RTL8192E, the internal
ifdef's are no longer needed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

The vendor code will generate several different drivers.  Eliminate
code used to generate code for the RTL8192SU devices.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

The vendor code will generate several different drivers. As the RTL8192CE
is covered by a mac80211 driver in mainline, eliminate that code here.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

The vendor code will generate several different drivers. As the RTL8192SE
is covered by a mac80211 driver in mainline, eliminate that code heere.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

The vendor code can conditionally generate drivers for a number of
devices. Remove any code that depends on RTL8190P being set.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Mike McCormack <mikem@ring3k.org>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Mike McCormack <mikem@ring3k.org>

[PATCH 1/8] rtl8192e: Import new version of driver from realtek
Signed-off-by: wlanfae <wlanfae@realtek.com>
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Add group event scheduling option to perf record/stat
  MAINTAINERS: Fix list of perf events source files
  perf tools: Fix build against newer glibc
  perf tools: Fix error handling of unknown events
  perf evlist: Fix missing event name init for default event
  perf list: Fix exit value

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/tracing: Fix tracing config option properly
  xen: Do not enable PV IPIs when vector callback not present
  xen/x86: replace order-based range checking of M2P table by linear one
  xen: xen-selfballoon.c needs more header files

Steven Rostedt says we should use CONFIG_EVENT_TRACING.

Cc:Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fix regression for HVM case on older (<4.1.1) hypervisors caused by

  commit 99bbb3a8
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Thu Dec 2 17:55:10 2010 +0000

    xen: PV on HVM: support PV spinlocks and IPIs

This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.

BugLink: http://bugs.launchpad.net/bugs/791850

CC: stable@kernel.org
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: handle ack_busy when fetching the Config ROM

This fixes a regression introduced by commit cdcb725c ("Btrfs: check
if there is enough space for balancing smarter").  We can't do 64-bit
divides on 32-bit architectures.

In cases where we need to divide/multiply by 2 we should just left/right
shift respectively, and in cases where theres N number of devices use
do_div.  Also make the counters u64 to match up with rw_devices.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Acked-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
  ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
  ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
  ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
  ext4: Fix ext4_should_writeback_data() for no-journal mode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree
  ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c
  ALSA: hda - Don't spew too many ELD errors
  ALSA: usb-audio - Fix missing mixer dB information
  ALSA: hda - Add "PCM" volume to vmaster slave list
  ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
  ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist
  ALSA: snd_usb_caiaq: track submitted output urbs

Fix new kernel-doc warning in pci.c:

  Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps'
  Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The label outnodev is only used when kzalloc has not yet taken place or has
failed, so there is no need for the call for kfree under this label.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
expression E1!=0,E2,E3,E4;
statement S;
iterator I;
@@

(
if (...) { ... when != kfree(x)
               when != x = E3
               when != E3 = x
*  return ...;
 }
... when != x = E2
    when != I(...,x,...) S
if (...) { ... when != x = E4
 kfree(x); ... return ...; }
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_hda_get_conn_index() returns a negative value while the current code
stores it in an unsigned int.  It must be stored in a signed integer.
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently HD-audio driver shows the all error ELD byte as an error
in the kernel message.  This is annoying when the video driver doesn't
set the correct ELD from the beginning. e.g. radeon sends a zero-byte
data, but we still check ELD with the fixed 128 byte as a workaround
for some broken devices, it spews 128-times errors.

For avoiding this, the driver aborts reading when the first byte is
invalid.  In such a case, the whole data is certainly invalid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>