- 25 Aug, 2020 13 commits
-
-
Danielle Ratson authored
The PTYS register is used to report and configure the port type and speed. Currently, internal bits in the register are used the same way other bits are used. Using the internal bits can cause bad parameter firmware errors. For example, trying to write to internal bit 25 returns: EMAD reg access failed (tid=53e2bffa00004310,reg_id=5004(ptys),type=write,status=7(bad parameter)) Remove the internal bits from the PTYS register, so that it is no longer possible to pass them to firmware. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, the test takes about 626 seconds to complete because of an inefficient use of the device's TCAM. Reduce the runtime to 202 seconds by inserting all the flower filters with the same preference and mask, but with a different key. In particular, this reduces the deletion of the qdisc (which triggers the deletion of all the filters) from 66 seconds to 0.2 seconds. This prevents various netlink requests from user space applications (e.g., systemd-networkd) from timing-out because RTNL is not held for too long anymore. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
Currently, mausezahn delay parameter in mirror_test() is specified with 'ms' units. mausezahn versions before 0.6.5 interpret 'ms' as seconds and therefore the tests that use mirror_test() take a very long time to complete. Resolve this by specifying 'msec' units. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Remove the first sub-test case as the variation in number of received packets is simply too large to reliably test it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
On Spectrum-{2,3} the required accuracy is +/-10%. Align the test to this requirement so that it can reliably pass on these platforms. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
On the Spectrum-{2,3} ASICs the minimum burst size of the packet trap policers needs to be 40% of the configured rate. Otherwise, intermittent drops are observed even when the incoming packet rate is slightly lower than the configured policer rate. Adjust the burst size of the registered packet trap policers so that they do not violate above mentioned limitation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'atl1e_setup_ring_resources()' (atl1e_main.c), 'atl1_setup_ring_resources()' (atl1.c) and 'atl2_setup_ring_resources()' (atl2.c) GFP_KERNEL can be used because it can be called from a .ndo_open. 'atl1_setup_ring_resources()' (atl1.c) can also be called from a '.set_ringparam' (see struct ethtool_ops) where sleep is also allowed. Both cases are protected by 'rtnl_lock()' which is a mutex. So these function can sleep. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'netdev_open()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> tx_timeout (.ndo_tx_timeout function) --> netdev_open @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'typhoon_init_one()' GFP_KERNEL can be used because it is a probe function and no lock is acquired. When memory is allocated in 'typhoon_download_firmware()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> typhoon_tx_timeout (.ndo_tx_timeout function) --> typhoon_start_runtime --> typhoon_download_firmware While at is, update some comments accordingly. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop duplicated words in /net/dccp/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop duplicated words in net/netlink/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop duplicate words in comments in net/ipv4/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Aug, 2020 15 commits
-
-
David S. Miller authored
Randy Dunlap says: ==================== net: sctp: delete duplicated words + other fixes Drop or fix repeated words in net/sctp/. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated word "an". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated words "for", "that", and "a". Change "his" to "this". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated words "of" and "that". Add some punctuation for readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated word "of". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated word "the" and "now". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Drop the repeated word "the" in two places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luke Hsiao authored
Currently, io_uring's recvmsg subscribes to both POLLERR and POLLIN. In the context of TCP tx zero-copy, this is inefficient since we are only reading the error queue and not using recvmsg to read POLLIN responses. This patch was tested by using a simple sending program to call recvmsg using io_uring with MSG_ERRQUEUE set and verifying with printks that the POLLIN is correctly unset when the msg flags are MSG_ERRQUEUE. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Luke Hsiao <lukehsiao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luke Hsiao authored
For TCP tx zero-copy, the kernel notifies the process of completions by queuing completion notifications on the socket error queue. This patch allows reading these notifications via recvmsg to support TCP tx zero-copy. Ancillary data was originally disallowed due to privilege escalation via io_uring's offloading of sendmsg() onto a kernel thread with kernel credentials (https://crbug.com/project-zero/1975). So, we must ensure that the socket type is one where the ancillary data types that are delivered on recvmsg are plain data (no file descriptors or values that are translated based on the identity of the calling process). This was tested by using io_uring to call recvmsg on the MSG_ERRQUEUE with tx zero-copy enabled. Before this patch, we received -EINVALID from this specific code path. After this patch, we could read tcp tx zero-copy completion notifications from the MSG_ERRQUEUE. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Luke Hsiao <lukehsiao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Parav Pandit says: ==================== devlink fixes for port and reporter field access These series contains two small fixes of devlink. Patch-1 initializes port reporter fields early enough to avoid access before initialized error. Patch-2 protects port list lock during traversal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Cited patch in fixes tag misses to protect port list traversal while traversing per port reporter list. Protect it using devlink instance lock. Fixes: f4f54166 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Cited patch in fixes tag initializes reporters_list and reporters_lock of a devlink port after devlink port is added to the list. Once port is added to the list, devlink_nl_cmd_health_reporter_get_dumpit() can access the uninitialized mutex and reporters list head. Fix it by initializing port reporters field before adding port to the list. Fixes: f4f54166 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
The login response buffer is freed after it is received and parsed, but other functions in the driver still attempt to read it, such as when the device is opened, causing the Oops below. Store relevant information in the driver's private data structures and use those instead. BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc00800000050a900 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables ibmvnic ibmveth crc32c_vpmsum autofs4 CPU: 7 PID: 759 Comm: NetworkManager Not tainted 5.9.0-rc1-00124-gd0a84e1f #14 NIP: c00800000050a900 LR: c00800000050a8f0 CTR: 00000000005b1904 REGS: c0000001ed746d20 TRAP: 0300 Not tainted (5.9.0-rc1-00124-gd0a84e1f) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24428484 XER: 00000001 CFAR: c0000000000101b0 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c00800000050a8f0 c0000001ed746fb0 c008000000518e00 0000000000000000 GPR04: 00000000000000c0 0000000000000080 0003c366c60c4501 0000000000000352 GPR08: 000000000001f400 0000000000000010 0000000000000000 0000000000000000 GPR12: 0001cf0000000019 c00000001ec97680 00000001003dfd40 0000010008dbb22c GPR16: 0000000000000000 0000000000000000 0000000000000000 c000000000edb6c8 GPR20: c000000004e73e00 c000000004fd2448 c000000004e6d700 c000000004fd2448 GPR24: c000000004fd2400 c000000004a0cd20 c0000001ed961860 c0080000005029d8 GPR28: 0000000000000000 0000000000000003 c000000004a0c000 0000000000000000 NIP [c00800000050a900] init_resources+0x338/0xa00 [ibmvnic] LR [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] Call Trace: [c0000001ed746fb0] [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] (unreliable) [c0000001ed747090] [c00800000050b024] ibmvnic_open+0x5c/0x100 [ibmvnic] [c0000001ed747110] [c000000000bdcc0c] __dev_open+0x17c/0x250 [c0000001ed7471b0] [c000000000bdd1ec] __dev_change_flags+0x1dc/0x270 [c0000001ed747260] [c000000000bdd2bc] dev_change_flags+0x3c/0x90 [c0000001ed7472a0] [c000000000bf24b8] do_setlink+0x3b8/0x1280 [c0000001ed747450] [c000000000bf8cc8] __rtnl_newlink+0x5a8/0x980 [c0000001ed7478b0] [c000000000bf9110] rtnl_newlink+0x70/0xb0 [c0000001ed7478f0] [c000000000bf07c4] rtnetlink_rcv_msg+0x364/0x460 [c0000001ed747990] [c000000000c68b94] netlink_rcv_skb+0x84/0x1a0 [c0000001ed747a00] [c000000000bef758] rtnetlink_rcv+0x28/0x40 [c0000001ed747a20] [c000000000c68188] netlink_unicast+0x218/0x310 [c0000001ed747a80] [c000000000c6848c] netlink_sendmsg+0x20c/0x4e0 [c0000001ed747b20] [c000000000b9dc88] ____sys_sendmsg+0x158/0x360 [c0000001ed747bb0] [c000000000ba1c88] ___sys_sendmsg+0x98/0xf0 [c0000001ed747d10] [c000000000ba1db8] __sys_sendmsg+0x78/0x100 [c0000001ed747dc0] [c000000000033820] system_call_exception+0x160/0x280 [c0000001ed747e20] [c00000000000d740] system_call_common+0xf0/0x27c Instruction dump: 3be00000 38810068 b1410076 3941006a 93e10072 fbea0000 b1210068 4bff9915 eb9e0ca0 eabe0900 393c0010 3ab50048 <7fa04c2c> 7fba07b4 7b431764 7b4917a0 ---[ end trace fbc5949a28e103bd ]--- Fixes: f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Test commands: ip netns add nst ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan ip link set ipvlan0 netns nst ip netns exec nst ip link show ipvlan0 Result: ---Before--- 6: ipvlan0@if5: <BROADCAST,MULTICAST> ... link/ether 82:3a:78:ab:60:50 brd ff:ff:ff:ff:ff:ff ---After--- 12: ipvlan0@if11: <BROADCAST,MULTICAST> ... link/ether 42:b1:ad:57:4e:27 brd ff:ff:ff:ff:ff:ff link-netnsid 0 ~~~~~~~~~~~~~~ Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Aug, 2020 9 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull entry fix from Thomas Gleixner: "A single bug fix for the common entry code. The transcription of the x86 version messed up the reload of the syscall number from pt_regs after ptrace and seccomp which breaks syscall number rewriting" * tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Respect syscall number rewrites
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll fixes from Al Viro: "Fix reference counting and clean up exit paths" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_epoll_ctl(): clean the failure exits up a bit epoll: Keep a reference on files added to the check list
-
- 22 Aug, 2020 3 commits
-
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Marc Zyngier authored
When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David S. Miller authored
Tom Parkin says: ==================== l2tp: replace custom logging code with tracepoints The l2tp subsystem implemented custom logging macros for debugging purposes which were controlled using a set of debugging flags in each tunnel and session structure. A more standard and easier-to-use approach is to use tracepoints. This patchset refactors l2tp to: * remove excessive logging * tweak useful log messages to use the standard pr_* calls for logging rather than the l2tp wrappers * replace debug-level logging with tracepoints * add tracepoints for capturing tunnel and session lifetime events I note that checkpatch.pl warns about the layout of code in the newly-added file net/l2tp/trace.h. When adding this file I followed the example(s) of other tracepoint files in the net/ subtree since it seemed preferable to adhere to the prevailing style rather than follow checkpatch.pl's advice in this instance. If that's the wrong approach please let me know. v1 -> v2 * Fix up a build warning found by the kernel test robot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-