- 12 Jan, 2018 12 commits
-
-
Elena Reshetova authored
CVE-2017-5753 CVE-2017-5715 Real commit text tbd Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Andy Whitcroft <apw@canonical.com> (cherry picked from commit 19299d3cee99e47bec3ace5d654eeb8fa6365bfd) Signed-off-by:
-
Elena Reshetova authored
CVE-2017-5753 CVE-2017-5715 real commit text tbd Signed-off-by:
-
Elena Reshetova authored
CVE-2017-5753 CVE-2017-5715 When constant blinding is enabled (bpf_jit_harden = 1), this adds a generic memory barrier (lfence for intel, mfence for AMD) before emitting x86 jitted code for the BPF_ALU(64)_OR_X and BPF_ALU_LHS_X (for BPF_REG_AX register) eBPF instructions. This is needed in order to prevent speculative execution on out of bounds BPF_MAP array indexes when JIT is enabled. This way an arbitary kernel memory is not exposed through side-channel attacks. For more details, please see this Google Project Zero report: tbd Signed-off-by:
-
Elena Reshetova authored
CVE-2017-5753 CVE-2017-5715 This adds a generic memory barrier before LD_IMM_DW and LDX_MEM_B/H/W/DW eBPF instructions during eBPF program execution in order to prevent speculative execution on out of bound BFP_MAP array indexes. This way an arbitary kernel memory is not exposed through side channel attacks. For more details, please see this Google Project Zero report: tbd Signed-off-by:
-
Elena Reshetova authored
CVE-2017-5753 CVE-2017-5715 In constrast to existing mb() and rmb() barriers, gmb() barrier is arch-independent and can be used to implement any type of memory barrier. In x86 case, it is either lfence or mfence, based on processor type. ARM and others can define it according to their needs. Suggested-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Daniel Borkmann authored
CVE-2017-5753 CVE-2017-5715 This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> (backported from commit 4f3446bb) Signed-off-by:
-
Daniel Borkmann authored
CVE-2017-5753 CVE-2017-5715 Since the blinding is strictly only called from inside eBPF JITs, we need to change signatures for bpf_int_jit_compile() and bpf_prog_select_runtime() first in order to prepare that the eBPF program we're dealing with can change underneath. Hence, for call sites, we need to return the latest prog. No functional change in this patch. Signed-off-by:
-
Daniel Borkmann authored
CVE-2017-5753 CVE-2017-5715 Move the functionality to patch instructions out of the verifier code and into the core as the new bpf_patch_insn_single() helper will be needed later on for blinding as well. No changes in functionality. Signed-off-by:
-
Borislav Petkov authored
CVE-2017-5754 This needs to happen early in kaiser_pagetable_walk(), before the hierarchy is established so that _PAGE_USER permission can be really set. A proper fix would be to teach kaiser_pagetable_walk() to update those permissions but the vsyscall page is the only exception here so ... Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 6dcf5491) Signed-off-by:
-
Thomas Gleixner authored
commit 1e547681 upstream. CVE-2017-5754 The recent changes for PTI touch cpu_tlbstate from various tlb_flush inlines. cpu_tlbstate is exported as GPL symbol, so this causes a regression when building out of tree drivers for certain graphics cards. Aside of that the export was wrong since it was introduced as it should have been EXPORT_PER_CPU_SYMBOL_GPL(). Use the correct PER_CPU export and drop the _GPL to restore the previous state which allows users to utilize the cards they payed for. As always I'm really thrilled to make this kind of change to support the sauce graphics corp. Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Fixes: 6fd166aa ("x86/mm: Use/Fix PCID to optimize user/kernel switches") Reported-by:
Kees Cook <keescook@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Tom Lendacky authored
commit f4e9b7af upstream. CVE-2017-5753 CVE-2017-5715 The size for the Microcode Patch Block (MPB) for an AMD family 17h processor is 3200 bytes. Add a #define for fam17h so that it does not default to 2048 bytes and fail a microcode load/update. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Alice Ferrazzi <alicef@gentoo.org> Signed-off-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
-
- 09 Jan, 2018 3 commits
-
-
Marcelo Henrique Cerri authored
Signed-off-by: -
Joseph Salisbury authored
BugLink: http://bugs.launchpad.net/bugs/1741934 There was a back port of upstream 4.4 stable commit 20cbe9a3 to Xenial which failed remove a kfree() from release_ds_buffer(). This commit does only that. It removes this extra kfree(). This left over kfree was causing a kernel trace on many systems as reported in the bug. This commit removes the kfree() like it should have been in the original commit. Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Brad Figg brad.figg@canonical.com Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:
-
- 07 Jan, 2018 3 commits
-
-
Marcelo Henrique Cerri authored
Signed-off-by: -
Andy Lutomirski authored
CVE-2017-5754 commit cba4671a upstream. 32-bit kernels on new hardware will see PCID in CPUID, but PCID can only be used in 64-bit mode. Rather than making all PCID code conditional, just disable the feature on 32-bit builds. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:
-
- 06 Jan, 2018 8 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by:Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Guenter Roeck authored
CVE-2017-5754 This resolves a crash if loaded under qemu + haxm under windows. See https://www.spinics.net/lists/kernel/msg2689835.html for details. Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that the same log is also seen with vanilla v4.4.110-rc1). [ 0.712750] Freeing unused kernel memory: 552K [ 0.721821] init: Corrupted page table at address 57b029b332e0 [ 0.722761] PGD 80000000bb238067 PUD bc36a067 PMD bc369067 PTE 45d2067 [ 0.722761] Bad pagetable: 000b [#1] PREEMPT SMP [ 0.722761] Modules linked in: [ 0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] task: ffff8800bc290000 ti: ffff8800bc28c000 task.ti: ffff8800bc28c000 [ 0.722761] RIP: 0010:[<ffffffff83f4129e>] [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP: 0000:ffff8800bc28fcf8 EFLAGS: 00010202 [ 0.722761] RAX: 0000000000000000 RBX: 00000000000001a4 RCX: 00000000000001a4 [ 0.722761] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000057b029b332e0 [ 0.722761] RBP: ffff8800bc28fd08 R08: ffff8800bc290000 R09: ffff8800bb2f4000 [ 0.722761] R10: ffff8800bc290000 R11: ffff8800bb2f4000 R12: 000057b029b332e0 [ 0.722761] R13: 0000000000000000 R14: 000057b029b33340 R15: ffff8800bb1e2a00 [ 0.722761] FS: 0000000000000000(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 [ 0.722761] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.722761] CR2: 000057b029b332e0 CR3: 00000000bb2f8000 CR4: 00000000000006e0 [ 0.722761] Stack: [ 0.722761] 000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c [ 0.722761] ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000 [ 0.722761] ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.722761] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.722761] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.722761] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.722761] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.722761] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.722761] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1 eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17 48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff [ 0.722761] RIP [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP <ffff8800bc28fcf8> [ 0.722761] ---[ end trace def703879b4ff090 ]--- [ 0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21 [ 0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init [ 0.722761] CPU: 1 PID: 1 Comm: init Tainted: G D 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] 0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004 [ 0.722761] ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9 [ 0.722761] ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f34004>] dump_stack+0x4d/0x63 [ 0.722761] [<ffffffff83d57dc9>] ___might_sleep+0x13a/0x13c [ 0.722761] [<ffffffff83d57e6a>] __might_sleep+0x9f/0xa6 [ 0.722761] [<ffffffff84502788>] down_read+0x20/0x31 [ 0.722761] [<ffffffff83cc5d9b>] __blocking_notifier_call_chain+0x35/0x63 [ 0.722761] [<ffffffff83cc5ddd>] blocking_notifier_call_chain+0x14/0x16 [ 0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 0.722761] [<ffffffff83cefe97>] profile_task_exit+0x1a/0x1c [ 0.802309] [<ffffffff83cac84e>] do_exit+0x39/0xe7f [ 0.802309] [<ffffffff83ce5938>] ? vprintk_default+0x1d/0x1f [ 0.802309] [<ffffffff83d7bb95>] ? printk+0x57/0x73 [ 0.802309] [<ffffffff83c46e25>] oops_end+0x80/0x85 [ 0.802309] [<ffffffff83c7b747>] pgtable_bad+0x8a/0x95 [ 0.802309] [<ffffffff83ca7f4a>] __do_page_fault+0x8c/0x352 [ 0.802309] [<ffffffff83eefba5>] ? file_has_perm+0xc4/0xe5 [ 0.802309] [<ffffffff83ca821c>] do_page_fault+0xc/0xe [ 0.802309] [<ffffffff84507682>] page_fault+0x22/0x30 [ 0.802309] [<ffffffff83f4129e>] ? __clear_user+0x42/0x67 [ 0.802309] [<ffffffff83f4127f>] ? __clear_user+0x23/0x67 [ 0.802309] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.802309] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.802309] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.802309] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.802309] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.802309] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.802309] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.802309] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.830559] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.830559] [ 0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 The crash part of this problem may be solved with the following patch (thanks to Hugh for the hint). There is still another problem, though - with this patch applied, the qemu session aborts with "VCPU Shutdown request", whatever that means. Cc: lepton <ytht.net@gmail.com> Signed-off-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrey Ryabinin authored
CVE-2017-5754 commit 69e0210f upstream. Currently we clear kasan_zero_page before __flush_tlb_all(). This works with current implementation of native_flush_tlb[_global]() because it doesn't cause do any writes to kasan shadow memory. But any subtle change made in native_flush_tlb*() could break this. Also current code seems doesn't work for paravirt guests (lguest). Only after the TLB flush we can be sure that kasan_zero_page is not used as early shadow anymore (instrumented code will not write to it). So it should cleared it only after the TLB flush. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
-
Andy Lutomirski authored
CVE-2017-5754 commit dac16fba upstream. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/9d37826fdc7e2d2809efe31d5345f97186859284.1449702533.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
CVE-2017-5754 commit 6b078f5d upstream. The pvclock vdso code was too abstracted to understand easily and excessively paranoid. Simplify it for a huge speedup. This opens the door for additional simplifications, as the vdso no longer accesses the pvti for any vcpu other than vcpu 0. Before, vclock_gettime using kvm-clock took about 45ns on my machine. With this change, it takes 29ns, which is almost as fast as the pure TSC implementation. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
-
Kees Cook authored
CVE-2017-5754 Make sure dmesg reports when KPTI is enabled. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Colin Ian King authored
CVE-2017-5754 This reverts commit b94ff634. Signed-off-by:
-
Kleber Sacilotto de Souza authored
Ignore: yes Signed-off-by:
-
- 05 Jan, 2018 14 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
Update config after patches for KAISER enablement. CVE-2017-5754 Signed-off-by: -
Colin Ian King authored
Currently running KVM/QEMU with vdso enabled trips a segfault on vdso access inside the virtual machine. Force the default vdso setting off to workaround this issue. It is our expecation to revert this once we have figured out the root issue. CVE-2017-5754 Signed-off-by:
-
Paolo Bonzini authored
rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by:
Laszlo Ersek <lersek@redhat.com> Tested-by:
-
Borislav Petkov authored
... before the first use of kaiser_enabled as otherwise funky things happen: about to get started... (XEN) d0v0 Unhandled page fault fault/trap [#14, ec=0000] (XEN) Pagetable walk from ffff88022a449090: (XEN) L4[0x110] = 0000000229e0e067 0000000000001e0e (XEN) L3[0x008] = 0000000000000000 ffffffffffffffff (XEN) domain_crash_sync called from entry.S: fault at ffff82d08033fd08 entry.o#create_bounce_frame+0x135/0x14d (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.9.1_02-3.21 x86_64 debug=n Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff81007460>] (XEN) RFLAGS: 0000000000000286 EM: 1 CONTEXT: pv guest (d0v0) Signed-off-by:
-
Jiri Kosina authored
Kaiser cannot be used on paravirtualized MMUs (namely reading and writing CR3). This does not work with KAISER as the CR3 switch from and to user space PGD would require to map the whole XEN_PV machinery into both. More importantly, enabling KAISER on Xen PV doesn't make too much sense, as PV guests use distinct %cr3 values for kernel and user already. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Borislav Petkov authored
Now that the required bits have been addressed, reenable PARAVIRT. Signed-off-by:
-
Thomas Gleixner authored
commit a0357954 upstream native_flush_tlb_single() will be changed with the upcoming PAGE_TABLE_ISOLATION feature. This requires to have more code in there than INVLPG. Remove the paravirt patching for it. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Cc: michael.schwarz@iaik.tugraz.at Cc: moritz.lipp@iaik.tugraz.at Cc: richard.fellner@student.tugraz.at Link: https://lkml.kernel.org/r/20171204150606.828111617@linutronix.deSigned-off-by:
-
Hugh Dickins authored
Let kaiser_flush_tlb_on_return_to_user() do the X86_FEATURE_PCID check, instead of each caller doing it inline first: nobody needs to optimize for the noPCID case, it's clearer this way, and better suits later changes. Replace those no-op X86_CR3_PCID_KERN_FLUSH lines by a BUILD_BUG_ON() in load_new_mm_cr3(), in case something changes. Acked-by:
-
Hugh Dickins authored
I found asm/tlbflush.h too twisty, and think it safer not to avoid __native_flush_tlb_global_irq_disabled() in the kaiser_enabled case, but instead let it handle kaiser_enabled along with cr3: it can just use __native_flush_tlb() for that, no harm in re-disabling preemption. (This is not the same change as Kirill and Dave have suggested for upstream, flipping PGE in cr4: that's neat, but needs a cpu_has_pge check; cr3 is enough for kaiser, and thought to be cheaper than cr4.) Also delete the X86_FEATURE_INVPCID invpcid_flush_all_nonglobals() preference from __native_flush_tlb(): unlike the invpcid_flush_all() preference in __native_flush_tlb_global(), it's not seen in upstream 4.14, and was recently reported to be surprisingly slow. Acked-by:
-
Hugh Dickins authored
I have not observed a might_sleep() warning from setup_fixmap_gdt()'s use of kaiser_add_mapping() in our tree (why not?), but like upstream we have not provided a way for that to pass is_atomic true down to kaiser_pagetable_walk(), and at startup it's far from a likely source of trouble: so just delete the walk's is_atomic arg and might_sleep(). Acked-by:
-
Hugh Dickins authored
Now that we're playing the ALTERNATIVE game, use that more efficient method: instead of user-mapping an extra page, and reading an extra cacheline each time for x86_cr3_pcid_noflush. Neel has found that __stringify(bts $X86_CR3_PCID_NOFLUSH_BIT, %rax) is a working substitute for the "bts $63, %rax" in these ALTERNATIVEs; but the one line with $63 in looks clearer, so let's stick with that. Worried about what happens with an ALTERNATIVE between the jump and jump label in another ALTERNATIVE? I was, but have checked the combinations in SWITCH_KERNEL_CR3_NO_STACK at entry_SYSCALL_64, and it does a good job. Acked-by:
-
Borislav Petkov authored
AMD (and possibly other vendors) are not affected by the leak KAISER is protecting against. Keep the "nopti" for traditional reasons and add pti=<on|off|auto> like upstream. Signed-off-by:
-
Tom Lendacky authored
commit e505371d upstream Add a cmdline_find_option() function to look for cmdline options that take arguments. The argument is returned in a supplied buffer and the argument length (regardless of whether it fits in the supplied buffer) is returned, with -1 indicating not found. Signed-off-by:
-
