- 11 Aug, 2015 20 commits
-
-
Frank Li authored
enable qspi support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
some pin name should be capital "_B" instead of "_b" Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
Enable usb host and function driver Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Sanchayan Maity authored
This commit adds io-channel-cells property to the ADC node. This property is required in order for an IIO consumer driver to work. Especially required for Colibri VF50, as the touchscreen driver uses ADC channels with the ADC driver based on IIO framework. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Alison Wang authored
This patch adds dts nodes for audio on LS1021A. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peter Chen authored
Add USBOTG and USB host 1 support Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
snvs is MFP device. Change dts to use syscon to allocate register resource. snvs power off also switch to common syscon-poweroff Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
Add new SOC i.MX6UL dtb file support, including evk board support i.MX6 Ultralite processor include one ARM cortext-A7 core. Offer high perfomance and lowest power consumption. Main included: - 4 MMC/SD/SDIO - 2 USB 2.0 OTG - 3 I2S/SAI/AC97 - 4 eCSPI - 4 I2C - 2 ENET - 2 CAN - 3 wdog - ASRC - 8 uart - LCDIF - PXP Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Fancy Fang <chen.fang@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
add pin mux define file Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
This part just add necessary change to boot imx6ul. Update clock and pinctrl for imx6ul Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Cory Tusar authored
Extend the existing Vybrid eSDHC devicetree implementation to also describe the esdhc0 functional block. Tested on a custom VF610-based board with a Toshiba THGBM1G5D2EBAI7 eMMC module attached to esdhc0. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently it is not possible to have HDMI and LVDS working simultaneously, because both ports try to use PLL5. Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be driven from independent sources. With this change the LDB pixel clock goes to 68.57 MHz, which is still within the valid range for the HSD100PXN1 LVDS panel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Cory Tusar authored
This commit extends the existing Vybrid QSPI devicetree implementation to also describe the qspi1 functional block. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Cory Tusar authored
Both 'reg' and 'reg-names' are required properties according to binding documentation, and both should contain two items. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Haikun Wang authored
Freescale DSPI driver has been updated and supports TCF interrupt type now. In the new driver we choose the interrupt type according the compatible string of the device node. This patch update the compatible string of DSPI device node of LS1021A in order to use the correct interrupt type. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frank Li authored
Added etm, etb, funnel and replicator usage example: echo 1 >/sys/bus/coresight/devices/30086000.etr/enable_sink echo 1 >/sys/bus/coresight/devices/3007c000.etm/enable_source coresight-tmc 30086000.etr: TMC enabled coresight-replicator replicator.1: REPLICATOR enabled coresight-tmc 30084000.tmc: TMC enabled coresight-funnel 30083000.funnel: FUNNEL inport 0 enabled coresight-funnel 30041000.funnel: FUNNEL inport 0 enabled coresight-etm3x 3007c000.etm: ETM tracing enabled etm enable here. trace data save at /dev/30086000.etr cat /dev/30086000.etr > trace.data coresight-tmc 30086000.etr: TMC read start coresight-tmc 30086000.etr: TMC read end use ptm2human(https://github.com/hwangcc23/ptm2human) to show trace data ptm2human -i trace.data Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently it is not possible to have HDMI and LVDS working simultaneously, because both ports try to use PLL5. Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be driven from independent sources. With this change the LDB pixel clock goes to 68.57 MHz, which is still within the valid range for the HSD100PXN1 LVDS panel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently it is not possible to have HDMI and LVDS working simultaneously, because both ports try to use PLL5. Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be driven from independent sources. With this change the LDB pixel clock goes to 68.57 MHz, which is still within the valid range for the HSD100PXN1 LVDS panel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Warp board rev1.12 is the version of the hardware that will be publicly available for the customers. It uses UART5 as the Bluetooth serial port as well as some additional signals for HOSTWAKE on Wifi and Bluetooth. Make the changes to support the rev1.12 hardware. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently it is not possible to have HDMI and LVDS working simultaneously, because both ports try to use PLL5. Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be driven from independent sources. With this change the LDB pixel clock goes to 68.57 MHz, which is still within the valid range for the HSD100PXN1 LVDS panel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 15 Jul, 2015 10 commits
-
-
Lucas Stach authored
Both imx53-qsb and imx53-qsrb don't have external pull-up resistors on the I2C1 SCL and SDA lines populated. Select open-drain mode and enable the internal pull-up for both. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shengjiu Wang authored
Add ESAI, ASRC, CS42888 for imx6qdl-sabreauto board Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Cory Tusar authored
This commit extends the existing Vybrid I2C support to cover buses i2c1, i2c2, and i2c3. Based in (very) large part on an initial patch by Stefan Agner that was just lacking a couple of DMA assignments. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Add HDMI support. As the DDC I2C pins are not connected due to pin conflicts, we do not pass the 'ddc-i2c-bus' property in this case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
imx6sl-warp has SD2_RESET pin connected to the eMMC reset line, so add this pin to the usdhc2 group. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Tim Harvey authored
UHS-I support is available on Ventana boards with micro-SD sockets depending on the board revision. To support this pinctl states for 100Mhz and 200MHz must be added as well as pinmux of the VSELECT signal. In order to support UHS-I the I/O rail of the 4-bit data bus must be switchable between 1.8V and 3.3V. By adding the no-1-8-v property, which disables UHS-I support, we allow the bootloader to be in charge of selecting which boards have this capability by removing that property if the board model/revision implement the support. Additionally we will remove NANDF_CS1 here from the nand pinmux group as the second chip-select is not used on any ventana boards and this is the pad that is used for SD3_VELECT. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Peter Seiderer authored
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Peter Seiderer authored
Regulator stuff copied from imx6qdl-tx6.dtsi, pin configuration taken from Boundary Devices linux kernel tree ([1] and [2]). [1] https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.10.17_1.0.2_ga/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi [2] https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.10.17_1.0.2_ga/arch/arm/boot/dts/imx6qdl.dtsiSigned-off-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Frank Li authored
enable snvs ONOFF power key support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Frank Li authored
Enable watchdog support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 14 Jul, 2015 1 commit
-
-
Frank Li authored
Add imx6ul clock driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 13 Jul, 2015 1 commit
-
-
Fabio Estevam authored
Currently it is not possible to use HDMI and LVDS at the same time on a imx6dl-sabresd board. Fix this usecase by setting IMX6QDL_CLK_PLL3_PFD1_540M to 540MHz and also by setting it as the parent of IMX6QDL_CLK_IPU1_SEL. Based on the configuration done in the FSL kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 05 Jul, 2015 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
-
Linus Torvalds authored
Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Jul, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
-
Al Viro authored
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
-
Al Viro authored
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-