- 23 Sep, 2024 2 commits
-
-
Liao Chen authored
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by:
Liao Chen <liaochen4@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240814025710.3875859-1-liaochen4@huawei.comSigned-off-by:
Lee Jones <lee@kernel.org>
-
Detlev Casanova authored
The ArmSoM Sige 5 board connects the rk806 PMIC on an i2c bus. Signed-off-by:
Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20240802134736.283851-1-detlev.casanova@collabora.comSigned-off-by:
-
- 30 Aug, 2024 31 commits
-
-
Siddharth Vadapalli authored
The ACSPCIE_PROXY_CTRL registers within the CTRL_MMR space of TI's J784S4 SoC are used to drive the reference clock to the PCIe Endpoint device via the PAD IO Buffers. Add the compatible for allowing the PCIe driver to obtain the regmap for the ACSPCIE_CTRL register within the System Controller device-tree node in order to enable the PAD IO Buffers. The Technical Reference Manual for J784S4 SoC with details of the ASCPCIE_CTRL registers is available at: https://www.ti.com/lit/zip/spruj52Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by:
-
Wilken Gottwalt authored
The driver was removed after kernel 6.2 rendering the header file unused. Signed-off-by:
Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZpTbGHb6EX2Oe7ok@monster.localdomainSigned-off-by:
-
Lukas Bulwahn authored
Commit f53d3efa ("MAINTAINERS: Add myself for Marvell 88PM886 PMIC") adds a file entry referring to drivers/regulators/88pm886-regulator.c, but the directory is actually called drivers/regulator. Note that there is no 's' at the end. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair the file entry in the MARVELL 88PM886 PMIC DRIVER section. Fixes: f53d3efa ("MAINTAINERS: Add myself for Marvell 88PM886 PMIC") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Reviewed-by:
Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240711065140.140703-1-lukas.bulwahn@redhat.comSigned-off-by:
-
Chen Ni authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20240709031824.585922-1-nichen@iscas.ac.cnSigned-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Javier Carrasco authored
`sprd_pmic_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-24-0c8785b1331d@gmail.comSigned-off-by:
-
Javier Carrasco authored
`regmap_mc13xxx_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`gsc_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`twl6040_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65912_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65910_irq_chip` and `tps65911_irq_chip` are not modified and can be declared as const to move their data to a read-only section. The pointer used to reference those structs has also been converted to const. Signed-off-by:
-
Javier Carrasco authored
`tps65219_irqs` and `tps65219_irq_chip` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65218_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65090_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65086_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd718xx_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-14-0c8785b1331d@gmail.comSigned-off-by:
-
Javier Carrasco authored
The regmap_irq and regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
The regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
The regmap_bus, regmap_irq and regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. The pointer to reference the regmap_irq_chip structs has been converted to const. Signed-off-by:
-
Javier Carrasco authored
The regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd9571mwv_irq_chip` and `bd9574mwf_irq_chip` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`pm800_irq`, `pm805_irq` and `pm805_irq_chip` are not modified and can be declared as const to move their data to a read-only section. In order to keep the const modifier for the regmap_irq_chip structures, the pointer used to reference them must be converted to const as well. Signed-off-by:
-
Javier Carrasco authored
`m10bmc_pmci_regmap_config` and `intel_m10bmc_regmap_config` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd957x_regmap`, `bd9576_irqs` and `bd9576_irq_chip` are not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps6105x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`wcd934x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`hi655x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`mx25_tsadc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`da9061_regmap_{config,irq,irq_chip}` and `da9062_{config,irq,irq_chip}` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by: -
Lee Jones authored
-
- 29 Aug, 2024 1 commit
-
-
Chris Morgan authored
Add support for the AXP717 PMIC to utilize the ADC (for reading voltage, current, and temperature information from the PMIC) as well as the USB charger and battery. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240821215456.962564-12-macroalpha82@gmail.comSigned-off-by:
-
- 01 Aug, 2024 4 commits
-
-
Clark Wang authored
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. This driver supports the PWM function using the platform device registered by the core MFD driver. The driver is derived from an initial implementation from NXP, available in commit 113113742208 ("MLK-25922-1 pwm: adp5585: add adp5585 PWM support") in their BSP kernel tree. It has been extensively rewritten. Signed-off-by:Clark Wang <xiaoning.wang@nxp.com> Reviewed-by:
Frank Li <Frank.Li@nxp.com> Co-developed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Uwe Kleine-König <ukleinek@kernel.org> Link: https://lore.kernel.org/r/20240722121100.2855-5-laurent.pinchart@ideasonboard.comSigned-off-by:
-
Haibo Chen authored
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. This driver supports the GPIO function using the platform device registered by the core MFD driver. The driver is derived from an initial implementation from NXP, available in commit 451f61b46b76 ("MLK-25917-2 gpio: adp5585-gpio: add adp5585-gpio support") in their BSP kernel tree. It has been extensively rewritten. Signed-off-by:Haibo Chen <haibo.chen@nxp.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Co-developed-by:
-
Haibo Chen authored
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. This driver supports the chip by modelling it as an MFD device, with two child devices for the GPIO and PWM functions. The driver is derived from an initial implementation from NXP, available in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core support") in their BSP kernel tree. It has been extensively rewritten. Signed-off-by: -
Laurent Pinchart authored
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. These bindings model the device as an MFD, and support the GPIO expander and PWM functions. These bindings support the GPIO and PWM functions. Drop the existing adi,adp5585 and adi,adp5585-02 compatible strings from trivial-devices.yaml. They have been added there by mistake as the driver that was submitted at the same time used different compatible strings. We can take them over safely. Reviewed-by:
-
- 28 Jul, 2024 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix RPM package build error caused by an incorrect locale setup - Mark modules.weakdep as ghost in RPM package - Fix the odd combination of -S and -c in stack protector scripts, which is an error with the latest Clang * tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix '-S -c' in x86 stack protector scripts kbuild: rpm-pkg: ghost modules.weakdep file kbuild: rpm-pkg: Fix C locale setup
-
