- 29 Nov, 2023 13 commits
-
-
Wenjing Liu authored
[why] In dcn32 DML pipes are ordered the same as dc pipes but only for used pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices would be 0 and 1 respectively. However update_pipe_slice_table_with_split_flags doesn't skip indices for free pipes. This causes us to not reference correct dml pipe output when building pipe topology. [how] Use two variables to iterate dc and dml pipes respectively and only increment dml pipe index when current dc pipe is not free. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ian Chen authored
If the link requests to skip implicit eDP power control, we should honor that request. Reviewed-by:
Robin Chen <robin.chen@amd.com> Acked-by:
Ian Chen <ian.chen@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why & How] Update to the new values per HW team request. Affects both stutter and z8. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Jonathan Kim authored
GC IP 9.4.2 and up support TA reporting of the number of xGMI links between peers. Tested-by:
Vignesh Chander <vignesh.chander@amd.com> Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
David Yat Sin authored
Fixes issue where user events of type KFD_EVENT_TYPE_HW_EXCEPTION do not have valid data Signed-off-by:
David Yat Sin <David.YatSin@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] DML2 means that the dcn3x policy for calculating z-state support no longer runs from validate_bandwidth. This means we are unconditionally allowing Z8, the hardware default. [How] Port the policy over to DCN35, but with a few modifications: - Don't use min_dst_y_next_start as a check for Z8/Z10 allow - Add support for overriding the Z10 stutter period per ASIC - Cleanup the code to make the policy assignment more clear Reviewed-by:
-
Alvin Lee authored
When waiting for the ACK for INBOX0 message, we have to ensure to include the udelay for proper wait time Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
-
Dennis Chan authored
[why] To support dynamic switching for Replay timing sync mechanism. Reviewed-by:
ChunTao Tso <chuntao.tso@amd.com> Acked-by:
Dennis Chan <dennis.chan@amd.com> Signed-off-by:
-
Lijo Lazar authored
Add sysfs attribute to read power management metrics. A snapshot is captured to the buffer when the attribute is read. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Lijo Lazar authored
Add support to fetch PM metrics sample from SMU v13.0.6 Signed-off-by:
-
Lijo Lazar authored
Add API support to fetch a snapshot of power management metrics from PMFW. Signed-off-by:
-
Srinivasan Shanmugam authored
Declaration of 'struct drm_device *dev' is redundant, as 'connector->dev' & 'dev_get_drvdata(kdev)' can be directly passed to 'drm_to_adev', without any intermediate DRM device 'dev' variable Cc: Roman Li <roman.li@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Roman Li <roman.li@amd.com> Signed-off-by:
-
André Almeida authored
Document what each amdgpu driver reset method does. Signed-off-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
-
- 17 Nov, 2023 27 commits
-
-
Srinivasan Shanmugam authored
Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1373: warning: Function parameter or member 'xcc_mask' not described in 'amdgpu_vm_flush_compute_tlb' Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Prike Liang authored
Add trace for amdgpu runpm separate funcs usage and this will help debugging on the case of runpm usage missed to dereference. In the normal case the runpm usage count referred by one kind of functionality pairwise and usage should be changed from 1 to 0, otherwise there will be an issue in the amdgpu runpm usage dereference. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Acked-by:
-
Alex Deucher authored
Define the pm metrics structures to be exposed via sysfs. Signed-off-by:
-
Shiwu Zhang authored
By catting the xgmi_port_num sysfs node, it prints out the info in the format of <src node id>:<src port num> -> <dst node id>:<dst port num> for one xgmi link. For example, in case of 4 sockets fully and evenly connected setup, it would be like as below for the first node in the hive. 01:02 -> 02:03 01:03 -> 02:02 01:07 -> 03:04 01:04 -> 03:07 01:06 -> 04:05 01:05 -> 04:06 Based on the fact that there is two xgmi links between each socket pair, "01:02 -> 02:03" means that the current socket in question use the port 2 to connect with port 3 of the second node in the hive and so on. v2: print out the src/dst node id for each xgmi link (lijo) v3: replace the current_node++ with +1 to align with dst node (le) and use the dev_err instead of pr_err (lijo) v4: fix checkpatch warning (alex) Signed-off-by:Shiwu Zhang <shiwu.zhang@amd.com> Acked-by:
Le Ma <le.ma@amd.com> Signed-off-by:
-
Aric Cyr authored
- Add missing chips for HDCP - Add new command to disable replay timing resync - Fix encoder disable logic - Enable DSC Flag in MST Mode Validation - Change the DMCUB mailbox memory location from FB to inbox - Add disable timeout option - Negate IPS allow and commit bits - Enable DCN clock gating for DCN35 - Prefer currently used OTG master when acquiring free pipe - Try to acquire a free OTG master not used in cur ctx first - Clear dpcd_sink_ext_caps if not set - Enable fast plane updates on DCN3.2 and above - Add null checks for 8K60 lightup - Refactor resource into component directory - Fix DSC not Enabled on Direct MST Sink - Guard against invalid RPTR/WPTR being set - Enable CM low mem power optimization - Fix a debugfs null pointer error Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Mario Limonciello authored
The PCIe speed capabilities advertised by a USB4 or TBT3 link are limited to PCIe gen 1 per the USB4 spec. In reality the speed will change dynamically based on fabric conditions and other traffic. DPM is disabled when dGPUs are connected directly to Intel hosts since the PCIe root port isn't able to handle dynamic speed switching. As this limitation is specifically for PCIe root ports in the SoC, don't apply it when connected to an eGPU enclosure connected to an Intel host. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2885Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Mario Limonciello authored
When bandwidth limits are looked up using pcie_bandwidth_available() virtual links such as USB4 are analyzed which might not represent the real speed. Furthermore devices may change speeds autonomously which may introduce conditional variation to the results reported in the status registers. Instead look at the capabilities of first PCI device outside of dGPU to decide upper limits that the dGPU will work at. For eGPU this effectively means that it will use the speed of the link partner. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925#note_2145860 Link: https://www.usb.org/document-library/usb4r-specification-v20 USB4 V2 with Errata and ECN through June 2023 Section 11.2.1 Reviewed-by:
-
Rodrigo Siqueira authored
[WHAT] Add missing HDCP ID in the message id enum. Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Anthony Koo authored
[WHY & HOW] Add new command to disable replay timing resync Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
-
Fangzhi Zuo authored
[WHY & HOW] When dsc is possible, MST mode validation includes: 1. if maximum dsc compression cannot fit into end to end bw, mode pruned 2. if native bw cannot fit into end to end bw, try to enabled dsc to see whether a feasible dsc config can be found 3. if native bw can fit into end to end bw, mode supported Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Acked-by:
Fangzhi Zuo <jerry.zuo@amd.com> Tested-by:
-
Krunoslav Kovac authored
[WHY & HOW] PB9 bit 5 was added to signal PQ EOTF in AMD vendor specific infoframe. This change sets it when appropriate. Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Tested-by:
-
Duncan Ma authored
[WHY] Driver continues running whenever there is is timeout from smu or dmcub. It is difficult to track failure state when dcn, dc or dmcub changes on root failure. [HOW] Add disable_timeout option to halt driver whenever there is a failure in response. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
-
Daniel Miess authored
[WHY & HOW] Enable DCN clock gating for DCN35. Disable DTBCLK gate before link training and re-enable afterwards Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Tested-by:
-
Wenjing Liu authored
[WHY & HOW] When acquiring an OTG master pipe we should prefer currently enabled OTG master pipes first. If there are no free pipes used as current OTG master pipe then we will try to acquire a currently unused free pipe as new OTG master instead of tearing down current secondary pipes from ODM or MPC combine. Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Acked-by:
-
Wenjing Liu authored
[WHY & HOW] The current otg master pipe allocation logic is not optimized based current resource context. We should try to acquire a free OTG master not used in cur cts first to avoid unnecessary pipe switch from current state. Acked-by:
-
Mounika Adhuri authored
[WHY] Move all resource files to unique folder resource. [HOW] Created resource folder in dc, moved the dcnxx_resource.c and dcnxx_resource.h files into corresponding new folders inside the resource and made appropriate changes for compilation in Makefiles. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Mounika Adhuri <moadhuri@amd.com> Tested-by:
-
Hamza Mahfooz authored
For features that are implemented primarily in DMUB (e.g. PSR), it is useful to be able to trace them at a DMUB level from the kernel, especially when debugging issues. So, introduce a debugfs interface that is able to read and set the DMUB trace mask dynamically at runtime and document how to use it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
-
Yihan Zhu authored
[WHY & HOW] MPC MCM low mem power optimization still causes color distortion on first SCE enablement, only forces light sleep for it. DPP low memory power optimization still needs this bit to save power. Reviewed-by:
Yihan Zhu <yihan.zhu@amd.com> Tested-by:
-
Yang Wang authored
correct mca ipid die/socket/addr decode v2: squash in fix from Yang Signed-off-by:
-
Aurabindo Pillai authored
[WHY & HOW] Check whether get_subvp_en() callback exists before calling it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Laurent Morichetti authored
The trap handler could be entered with pending VALU exceptions, so clear the exception state before issuing vector instructions. Reviewed-by:
Jay Cornwall <jay.cornwall@amd.com> Acked-by:
Laurent Morichetti <laurent.morichetti@amd.com> Tested-by:
Lancelot Six <lancelot.six@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the below: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Missing a blank line after declarations WARNING: Too many leading tabs - consider code refactoring + if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) { WARNING: Too many leading tabs - consider code refactoring + if (!amdgpu_display_hpd_sense(adev, amdgpu_connector->hpd.hpd)) { Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
Ma Jun authored
smu_v13_0_baco_set_armd3_sequence is not used by other files, so make it as static type. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
-
Ma Jun authored
Use generic functions and remove the duplicate code Signed-off-by:
-
Abhinav Singh authored
sparse static analysis tools generate a warning with this message "Using plain integer as NULL pointer". In this case this warning is being shown because we are trying to intialize a pointer to NULL using integer value 0. Signed-off-by:
Abhinav Singh <singhabhinav9051571833@gmail.com> Signed-off-by:
-
Sam James authored
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out on various files in drivers/gpu/drm/amd/amdgpu like: ``` amdgpu_amdkfd_gfx_v8.c:241:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]'} with size ‘8’ [-Werror=alloc-size] ``` This is because each HQD_N_REGS is actually a uint32_t[2]. Move the * 2 to the size argument so GCC sees we're allocating enough. Originally did 'sizeof(uint32_t) * 2' for the size but a friend suggested 'sizeof(**dump)' better communicates the intent. Link: https://lore.kernel.org/all/87wmuwo7i3.fsf@gentoo.org/Signed-off-by:Sam James <sam@gentoo.org> Signed-off-by:
-
Ma Jun authored
Fix the return value and drop redundant parameter of get_asic_baco_capability function. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
