- 13 Jul, 2013 1 commit
-
-
James Bottomley authored
A short series of fixes to libfc, libfcoe and fcoe. Most patches fix formatting problems, one changes the behavior of which discovered ports can/will be logged into and another fixes a memory leak.
-
- 09 Jul, 2013 25 commits
-
-
Douglas Gilbert authored
It has been several years since the SCSI constants.c file has been updated. The attached is against lk 3.10 and brings the command strings, sense keys and additional sense code strings into sync with spc4r36g.pdf. Certain SCSI command names that previously only took the opcode (i.e. byte 0 of the cdb) into account, have been split into several command names using the associated service action field to differentiate. For example, persistent reservations that previously had 2 commands (i.e. "in" and "out") have been expanded to 12 commands (e.g. "Persistent reserve in, read reservation"). Sync SCSI command names, sense key strings and additional sense code strings with SPC-4 draft revision 36g [jejb: whitespace fix] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Declare local variables and functions 'static'. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Mark Rustad authored
When repeatedly doing rmmod and modprobe on the ixgbe driver while FCoE is active in a VN2VN configuration, memory leaks would be discovered by kmemleak with the following backtrace: unreferenced object 0xffff88003d076000 (size 1024): comm "kworker/0:3", pid 2998, jiffies 4295436448 (age 1015.332s) hex dump (first 32 bytes): 48 8a fe 6f 00 88 ff ff 00 00 00 00 00 00 00 00 H..o............ 01 00 00 00 02 00 00 00 7b ac 87 21 1b 00 00 10 ........{..!.... backtrace: [<ffffffff814b308b>] kmemleak_alloc+0x5b/0xc0 [<ffffffff8115c6e8>] __kmalloc+0xd8/0x1b0 [<ffffffffa0216638>] fc_rport_create+0x48/0x1f0 [libfc] [<ffffffffa023cd86>] fcoe_ctlr_vn_add.isra.10+0x56/0x1a0 [libfcoe] [<ffffffffa023f440>] fcoe_ctlr_vn_recv+0x8b0/0xab0 [libfcoe] [<ffffffffa023fb06>] fcoe_ctlr_recv_work+0x4c6/0xf60 [libfcoe] [<ffffffff81067404>] process_one_work+0x1e4/0x4d0 [<ffffffff81068def>] worker_thread+0x10f/0x380 [<ffffffff8107019a>] kthread+0xea/0xf0 [<ffffffff814d32ec>] ret_from_fork+0x7c/0xb0 [<ffffffffffffffff>] 0xffffffffffffffff This patch stops the leak of the fc_rport_priv structure. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Robert Love authored
ctlr_dev was initialized to NULL, and never re-assigned. This caused the log statement to always report failure. This patch removes the unused variable and fixes the log statement to always report 'success', as that is what should be logged if the code reaches this point. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
-
Robert Love authored
There are two debug statements with the same output string regarding echange timer cancellation. This patch simply changes the output of one string so that they can be differentiated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
-
Robert Love authored
Simply remove an extra space that violates coding style. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
-
Yi Zou authored
Both fcoe_fc_els_lesb and fc_els_lesb are in __be32 already, and both are exactly the same size in bytes, with somewhat different member names to reflect the fact the former is for Ethernet media the latter is for Fiber Channel, so, remove conversion and use __be32 directly. This fixes the warning from sparse check. Signed-off-by: Yi Zou <yi.zou@intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Neerav Parikh authored
This patch fixes a smatch warning as below: smatch warnings: drivers/scsi/fcoe/fcoe.c:782 fcoe_fdmi_info() warn: 'fdmi' puts 896 bytes on stack Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Mark Rustad authored
Reject a PLOGI from a node with an incompatible role, that is, initiator-to-initiator or target-to-target. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
If something goes wrong during LUN scanning, e.g. a transport layer failure occurs, then __scsi_remove_device() can get invoked by the LUN scanning code for a SCSI device in state SDEV_CREATED_BLOCK and before the SCSI device has been added to sysfs (is_visible == 0). Make sure that even in this case the transition into state SDEV_DEL occurs. This avoids that __scsi_remove_device() can get invoked a second time by scsi_forget_host() if this last function is invoked from another thread than the thread that performs LUN scanning. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
James Bottomley authored
scsi_run_queue() examines all SCSI devices that are present on the starved list. Since scsi_run_queue() unlocks the SCSI host lock a SCSI device can get removed after it has been removed from the starved list and before its queue is run. Protect against that race condition by holding a reference on the queue while running it. Reported-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Carpenter authored
On 64 bit then -1UL and -1U are not equal, so these conditions don't work as intended and it breaks error handling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
In order to reduce code duplication between prot_verify_read() and prot_verify_write(), this moves common code into the new functions. [jejb: fix unitialised variable warning] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
dif_storep is declared as pointer to unsigned char type. But it is actually used to store vmalloced array of struct sd_dif_tuple. This changes the type of dif_storep to the pointer to struct sd_dif_tuple. It simplifies offset calculation for dif_storep and enables to remove hardcoded size of struct sd_dif_tuple. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
When UNMAP command is issued with the data integrity support enabled, the protection info for the unmapped region is remain unchanged. So READ command for the region later on causes data integrity failure. This fixes it by invalidating protection info for the unmapped region by filling with 0xff pattern. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
The protection info dif_storep is allocated only when parameter dif is not zero. But it will be accessed when reading or writing to the storage installed with parameter dix is not zero. So kernel crashes if scsi_debug module is loaded with parameters dix=1 and dif=0. This fixes it by making dif_storep available if parameter dix is not zero instead of checking if parameter dif is not zero. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
In the function prot_verify_write(), kmap_atomic()/kunmap_atomic() for data page and kmap_atomic()/kunmap_atomic() for protection information page are not nested each other. It worked perfectly before commit 3e4d3af5 ("mm: stack based kmap_atomic()"). Because the kmap_atomic slot KM_IRQ0 was used for data page and the slot KM_IRQ1 was used for protection page. But KM_types are gone and kmap_atomic() is using stack based implementation. So two different kmap_atomic() usages must be strictly nested now. This change ensures kmap_atomic() usage is strictly nested. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Akinobu Mita authored
In the function prot_verify_write(), the kmap address 'daddr' is incremented in the loop for each data page. Finally 'daddr' reaches the next page boundary in the end of the loop, and the invalid address is passed to kunmap_atomic(). Fix the issue by not incrementing 'daddr' in the loop and offsetting it by the loop counter on demand. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Bump driver version to v02.100.00.00. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
[SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed When Async scanning mode is enabled and device scanning is in progress, devices should not be removed. But in actuality, devices are removed but their transport layer entries are not removed. This causes error to add the same device to the transport layer after host reset or diagnostic reset. So, in this patch, modified the code in such a way that device is not removed when Async scanning mode is enabled and device scanning is in progress. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Change set in MPI v2.5 Rev F(v2.5.1.1) specification and 2.00.29 header files 1. Added a bit to the IOCExceptions field of the IOCFacts Reply to indicate that the IOC detected a partial memory failure. 2. Added ElapsedSeconds field to RAID Volume Indicator Structure. Added Elapsed Seconds Valid flag to Flags field of this structure. 3. Added ElapsedSeconds field to Integrated RAID Operations Status Event Data. 4. Added two new AbortType values for TargetModeAbort Request, one to abort all I/Os from a single initiator, and the other to abort only Command IUs. 5. Added a new chapter covering DMA Flags and Multicast Modes. 6. In the IOCSettings field of BIOS Page 1, modified the Adapter Support bits description to specify X86 BIOS. 7. Marked bit 0 of the ControlFlags field of SAS IO Unit Page 1 as obsolete. This was the Clear SATA Affiliation flag. 8. Added additional requirements for certain IOCs that support more than eight MSI-x vectors. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Infinite loop can occur if IOCStatus is not equal to MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions _scsih_search_responding_sas_devices, _scsih_search_responding_raid_devices and _scsih_search_responding_expanders So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value, in this patch code is modified to check for IOCStatus not equals to MPI2_IOCSTATUS_SUCCESS to break the while loop. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
[SCSI] mpt3sas: fix for kernel panic when driver loads with HBA conected to non LUN 0 configured expander With some enclosures when LUN 0 is not created but LUN 1 or LUN X is created then SCSI scan procedure calls target_alloc, slave_alloc call back functions for LUN 0 and slave_destory() for same LUN 0. In these kind of cases within slave_destroy, pointer to scsi_target in _sas_device structure is set to NULL, following which when slave_alloc for LUN 1 is called then starget would not be set properly for this LUN. So, scsi_target pointer pointing to NULL value would lead to a crash later in the discovery procedure. To solve this issue set the sas_device's scsi_target pointer to scsi_device's scsi_target if it is NULL earlier in slave_alloc callback function. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Hardware timing requirements is updated in order to comply with firmware requirement. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
The Copyright String in all mpt3sas files are changed to 2012-2013. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 08 Jul, 2013 14 commits
-
-
Bart Van Assche authored
Avoid that the fcport structure gets leaked if bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN, the fcport allocation succeeds and the !vha->flags.online branch is taken. This was detected by Coverity. However, Coverity does not recognize that all qla2x00_process_els() callers specify either FC_BSG_RPT_ELS or FC_BSG_HST_ELS_NOLOGIN in the field bsg_job->request->msgcode and that the value of that field is not modified inside that function. This results in a false positive report about a possible memory leak in an error path for bsg_job->request->msgcode values other than the two mentioned values. Make it easy for Coverity (and for humans) to recognize that there is no fcport leak in the error path by changing the bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN test into bsg_job->request->msgcode != FC_BSG_RPT_ELS. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Change the 'rval' variable from QLA_FUNCTION_TIMEOUT into QLA_SUCCESS before starting a loop that is only executed if rval is initialized to QLA_SUCCESS. Coverity reported that loop as "dead code". Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Coverity reports "Overrunning struct type ct_sns_req of 1228 bytes by passing it to a function which accesses it at byte offset 8207" for each qla2x00_prep_ct_req(), qla2x00_prep_ct_fdmi_req() and qla24xx_prep_ct_fm_req() call. Help Coverity to recognize that these calls do not trigger a buffer overflow by making it explicit that these three functions initializes both the request and reply structures. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
The value of the pointer called "nxt" is not used after the "nxt = qla24xx_copy_eft(ha, nxt)" statement. Hence keep the function call but remove the assignment. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Since the value of cur_seg is not used and since scsi_prot_sglist() has no side effects it is safe to remove the statement "cur_seg = scsi_port_sglist(cmd)". Detected by Coverity. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Since ha->model_desc is an array comparing it against NULL is superfluous. Hence remove these tests. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
At the end of qla2x00_configure_hba() we know that rval == QLA_SUCCESS. Hence remove the dead code. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Remove dead code, simplify a pointer computation and move the ql84_mgmt assignment to just before its first use. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bart Van Assche authored
Remove dead code and simplify a pointer computation. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
When we are intentionally generating a firmware dump by executing the MBC_GEN_SYSTEM_ERROR command, the command actually times out. The normal course of action when a mailbox command times out is to take a firmware dump. However, in this special case we do not want to do this since the MBA_SYSTEM_ERR AEN already generates a firmware dump. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
During a chip reset, the mailbox call to get FC statistics from the ISP will not work resulting in needless mailbox accesses and errors printing out: qla2xxx [0000:05:00.0]-00af:11: Performing ISP error recovery - ha=ffff881fad044800. qla2xxx [0000:05:00.0]-1020:11: **** Failed mbx[0]=4001, mb[1]=4953, mb[2]=5020, mb[3]=b100, cmd=6d ****. qla2xxx [0000:05:00.0]-1020:11: **** Failed mbx[0]=4001, mb[1]=4953, mb[2]=5020, mb[3]=b100, cmd=6d ****. qla2xxx [0000:05:00.0]-1020:11: **** Failed mbx[0]=4001, mb[1]=4953, mb[2]=5020, mb[3]=b100, cmd=6d ****. qla2xxx [0000:05:00.0]-1020:11: **** Failed mbx[0]=4001, mb[1]=4953, mb[2]=5020, mb[3]=b100, cmd=6d ****. qla2xxx [0000:05:00.0]-1020:11: **** Failed mbx[0]=4001, mb[1]=4953, mb[2]=5020, mb[3]=b100, cmd=6d ****. To prevent this, check for a chip reset when an application queries for FC stats and return immediately if a chip reset is occurring. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-