This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 885b9790 ("drivers:iio:dac:ad5766.c: Add trigger buffer")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-8-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 8f2b5482 ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-7-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 6c7bc1d2 ("iio: adc: ti-lmp92064: add buffering support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-6-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.

Fixes: 62719894 ("iio: adc: add ADC driver for the TI LMP92064 controller")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-5-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: e717f8c6 ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-3-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: d1efcf88 ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-2-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 7c1d1677 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-1-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix:
   sh4-linux-ld: drivers/iio/pressure/sdp500.o: in function `sdp500_probe':
>> drivers/iio/pressure/sdp500.c:130:(.text+0xe8): undefined reference to `crc8_populate_msb'
   sh4-linux-ld: drivers/iio/pressure/sdp500.o: in function `sdp500_read_raw':
>> drivers/iio/pressure/sdp500.c:74:(.text+0x200): undefined reference to `crc8'

by adding missing select.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409271341.0dhpXk7G-lkp@intel.com/
Link: https://patch.msgid.link/20240929172105.1819259-1-jic23@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.

Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.

Cc: <stable@vger.kernel.org>
Fixes: 7b779f57 ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This reversed if statement means that the function just returns success
without writing to the registers.

Fixes: 16531118 ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/689a2122-6e2f-4b0c-9a1c-39a98621c6c1@stanley.mountainSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This code is using bmi323_reg_savestate[] and ->reg_settings[] instead
of bmi323_ext_reg_savestate[] and ->ext_reg_settings[].  This was
discovered by Smatch:

    drivers/iio/imu/bmi323/bmi323_core.c:2202 bmi323_core_runtime_suspend()
    error: buffer overflow 'bmi323_reg_savestate' 9 <= 11

Fixes: 16531118 ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/7175b8ec-85cf-4fbf-a4e1-c4c43c3b665c@stanley.mountainSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When building with clang and CONFIG_PM disabled (such as with s390), it
warns:

  drivers/iio/imu/bmi323/bmi323_core.c:121:27: warning: variable 'bmi323_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
    121 | static const unsigned int bmi323_reg_savestate[] = {
        |                           ^~~~~~~~~~~~~~~~~~~~
  drivers/iio/imu/bmi323/bmi323_core.c:133:27: warning: variable 'bmi323_ext_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
    133 | static const unsigned int bmi323_ext_reg_savestate[] = {
        |                           ^~~~~~~~~~~~~~~~~~~~~~~~

These arrays have no references outside of sizeof(), which will be
evaluated at compile time. To avoid these warnings, remove the CONFIG_PM
ifdef guard and use the RUNTIME_PM_OPS macro to ensure these functions
always appear used to the compiler, which allows the references to the
arrays to be visible as well. This results in no difference in runtime
behavior because bmi323_core_pm_ops is only used when CONFIG_PM is set
with the pm_ptr() macro.

Fixes: b09999ee ("iio: bmi323: suspend and resume triggering on relevant pm operations")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240910-iio-bmi323-remove-config_pm-guards-v1-1-0552249207af@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device
compatible strings with the exception of "adi,ad5337r". Since
adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C
devices from it making it only SPI devices. Update the titles to make
the distinction clear.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240910234440.1045098-1-robh@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.

Add missing full-scale range array value.

Fixes: 94a9b7b1 ("iio: light: add support for TI's opt3001 light sensor")
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.

dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.

This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.

Cc: stable@vger.kernel.org
Fixes: 7b779f57 ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In the current implementation, the local variable field_value is used
without prior initialization, which may lead to reading uninitialized
memory. Specifically, in the macro set_mask_bits, the initial
(potentially uninitialized) value of the buffer is copied into old__,
and a mask is applied to calculate new__. A similar issue was resolved in
commit 6ee2a705 ("iio: accel: bma400: Fix smatch warning based on use
of unintialized value.").

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 961db2da ("iio: accel: bma400: Add support for single and double tap events")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240910083624.27224-1-m.lobanov@rosalinux.ruSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:

  #if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
  void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
  ...

leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:

  arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
  arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
  12517 |         cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
  arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
  12522 |         cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.

Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback.  I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.

Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull mailbox updates from Jassi Brar:

 - fix kconfig dependencies (mhu-v3, omap2+)

 - use devie name instead of genereic imx_mu_chan as interrupt name
   (imx)

 - enable sa8255p and qcs8300 ipc controllers (qcom)

 - Fix timeout during suspend mode (bcm2835)

 - convert to use use of_property_match_string (mailbox)

 - enable mt8188 (mediatek)

 - use devm_clk_get_enabled helpers (spreadtrum)

 - fix device-id typo (rockchip)

* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox, remoteproc: omap2+: fix compile testing
  dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
  dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
  dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
  mailbox: Use of_property_match_string() instead of open-coding
  mailbox: bcm2835: Fix timeout during suspend mode
  mailbox: sprd: Use devm_clk_get_enabled() helpers
  mailbox: rockchip: fix a typo in module autoloading
  mailbox: imx: use device name in interrupt name
  mailbox: ARM_MHU_V3 should depend on ARM64

Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
   always be sent when needed

 - check for PCLK in the SynQuacer controller as an optional clock,
   allowing ACPI to directly provide the clock rate

 - KEBA driver Kconfig dependency fix

 - fix XIIC driver power suspend sequence

* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
  i2c: keba: I2C_KEBA should depend on KEBA_CP500
  i2c: synquacer: Deal with optional PCLK correctly
  i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

Pull dma-mapping fix from Christoph Hellwig:

 - handle chained SGLs in the new tracing code (Christoph Hellwig)

* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix DMA API tracing for chained scatterlists

Pull more SCSI updates from James Bottomley:
 "These are mostly minor updates.

  There are two drivers (lpfc and mpi3mr) which missed the initial
  pull and a core change to retry a start/stop unit which affect
  suspend/resume"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
  scsi: lpfc: Update lpfc version to 14.4.0.5
  scsi: lpfc: Support loopback tests with VMID enabled
  scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
  scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
  scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
  scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
  scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
  scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
  scsi: mpi3mr: Update driver version to 8.12.0.0.50
  scsi: mpi3mr: Improve wait logic while controller transitions to READY state
  scsi: mpi3mr: Update MPI Headers to revision 34
  scsi: mpi3mr: Use firmware-provided timestamp update interval
  scsi: mpi3mr: Enhance the Enable Controller retry logic
  scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
  scsi: pm8001: Do not overwrite PCI queue mapping
  scsi: scsi_debug: Remove a useless memset()
  scsi: pmcraid: Convert comma to semicolon
  scsi: sd: Retry START STOP UNIT commands
  scsi: mpi3mr: A performance fix
  scsi: ufs: qcom: Update MODE_MAX cfg_bw value
  ...

Pull more bcachefs updates from Kent Overstreet:
 "Assorted minor syzbot fixes, and for bigger stuff:

  Fix two disk accounting rewrite bugs:

   - Disk accounting keys use the version field of bkey so that journal
     replay can tell which updates have been applied to the btree.

     This is set in the transaction commit path, after we've gotten our
     journal reservation (and our time ordering), but the
     BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
     uses was incorrectly skipping this for new updates generated prior
     to journal replay.

     This fixes the underlying cause of an assertion pop in
     disk_accounting_read.

   - A couple of fixes for disk accounting + device removal.

     Checking if acocunting replicas entries were marked in the
     superblock was being done at the wrong point, when deltas in the
     journal could still zero them out, and then additionally we'd try
     to add a missing replicas entry to the superblock without checking
     if it referred to an invalid (removed) device.

  A whole slew of repair fixes:

   - fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
     an infinite loop when repairing a filesystem with many snapshots

   - fix incorrect transaction restart handling leading to occasional
     "fsck counted ..." warnings

   - fix warning in __bch2_fsck_err() for bkey fsck errors

   - check_inode() in fsck now correctly checks if the filesystem was
     clean

   - there shouldn't be pending logged ops if the fs was clean, we now
     check for this

   - remove_backpointer() doesn't remove a dirent that doesn't actually
     point to the inode

   - many more fsck errors are AUTOFIX"

* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
  bcachefs: check_subvol_path() now prints subvol root inode
  bcachefs: remove_backpointer() now checks if dirent points to inode
  bcachefs: dirent_points_to_inode() now warns on mismatch
  bcachefs: Fix lost wake up
  bcachefs: Check for logged ops when clean
  bcachefs: BCH_FS_clean_recovery
  bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
  bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
  bcachefs: Check for accounting keys with bversion=0
  bcachefs: rename version -> bversion
  bcachefs: Don't delete unlinked inodes before logged op resume
  bcachefs: Fix BCH_SB_ERRS() so we can reorder
  bcachefs: Fix fsck warnings from bkey validation
  bcachefs: Move transaction commit path validation to as late as possible
  bcachefs: Fix disk accounting attempting to mark invalid replicas entry
  bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
  bcachefs: Fix accounting read + device removal
  bcachefs: bch_accounting_mode
  bcachefs: fix transaction restart handling in check_extents(), check_dirents()
  bcachefs: kill inode_walker_entry.seen_this_pos
  ...

Pull x86 fixes from Ingo Molnar:
 "Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
  for 'Pantherlake' and 'Diamond Rapids'"

* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add two Intel CPU model numbers
  x86/tdx: Fix "in-kernel MMIO" check

Pull locking updates from Ingo Molnar:
 "lockdep:
    - Fix potential deadlock between lockdep and RCU (Zhiguo Niu)
    - Use str_plural() to address Coccinelle warning (Thorsten Blum)
    - Add debuggability enhancement (Luis Claudio R. Goncalves)

  static keys & calls:
    - Fix static_key_slow_dec() yet again (Peter Zijlstra)
    - Handle module init failure correctly in static_call_del_module()
      (Thomas Gleixner)
    - Replace pointless WARN_ON() in static_call_module_notify() (Thomas
      Gleixner)

  <linux/cleanup.h>:
    - Add usage and style documentation (Dan Williams)

  rwsems:
    - Move is_rwsem_reader_owned() and rwsem_owner() under
      CONFIG_DEBUG_RWSEMS (Waiman Long)

  atomic ops, x86:
    - Redeclare x86_32 arch_atomic64_{add,sub}() as void (Uros Bizjak)
    - Introduce the read64_nonatomic macro to x86_32 with cx8 (Uros
      Bizjak)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>

* tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Move is_rwsem_reader_owned() and rwsem_owner() under CONFIG_DEBUG_RWSEMS
  jump_label: Fix static_key_slow_dec() yet again
  static_call: Replace pointless WARN_ON() in static_call_module_notify()
  static_call: Handle module init failure correctly in static_call_del_module()
  locking/lockdep: Simplify character output in seq_line()
  lockdep: fix deadlock issue between lockdep and rcu
  lockdep: Use str_plural() to fix Coccinelle warning
  cleanup: Add usage and style documentation
  lockdep: suggest the fix for "lockdep bfs error:-1" on print_bfs_bug
  locking/atomic/x86: Redeclare x86_32 arch_atomic64_{add,sub}() as void
  locking/atomic/x86: Introduce the read64_nonatomic macro to x86_32 with cx8

Pull coccinelle updates from Julia Lawall:
 "Extend string_choices.cocci to use more available helpers

  Ten patches from Hongbo Li extending string_choices.cocci with the
  complete set of functions offered by include/linux/string_choices.h.

  One patch from myself reducing the number of redundant cases that are
  checked by Coccinelle, giving a small performance improvement"

* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  Reduce Coccinelle choices in string_choices.cocci
  coccinelle: Remove unnecessary parentheses for only one possible change.
  coccinelle: Add rules to find str_yes_no() replacements
  coccinelle: Add rules to find str_on_off() replacements
  coccinelle: Add rules to find str_write_read() replacements
  coccinelle: Add rules to find str_read_write() replacements
  coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
  coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
  coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
  coccinelle: Add rules to find str_false_true() replacements
  coccinelle: Add rules to find str_true_false() replacements

Merge tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "One urgent fix to vDSO as automated testing is failing due to this
  bug"

* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vDSO: align stack for O2-optimized memcpy

Merge all pending locking commits into a single branch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.

At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.

Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern.  The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:

  -  x
  +  y

not:

  (
  -  x
  +  y
  )
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Pull x86 kvm updates from Paolo Bonzini:
 "x86:

   - KVM currently invalidates the entirety of the page tables, not just
     those for the memslot being touched, when a memslot is moved or
     deleted.

     This does not traditionally have particularly noticeable overhead,
     but Intel's TDX will require the guest to re-accept private pages
     if they are dropped from the secure EPT, which is a non starter.

     Actually, the only reason why this is not already being done is a
     bug which was never fully investigated and caused VM instability
     with assigned GeForce GPUs, so allow userspace to opt into the new
     behavior.

   - Advertise AVX10.1 to userspace (effectively prep work for the
     "real" AVX10 functionality that is on the horizon)

   - Rework common MSR handling code to suppress errors on userspace
     accesses to unsupported-but-advertised MSRs

     This will allow removing (almost?) all of KVM's exemptions for
     userspace access to MSRs that shouldn't exist based on the vCPU
     model (the actual cleanup is non-trivial future work)

   - Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
     splits the 64-bit value into the legacy ICR and ICR2 storage,
     whereas Intel (APICv) stores the entire 64-bit value at the ICR
     offset

   - Fix a bug where KVM would fail to exit to userspace if one was
     triggered by a fastpath exit handler

   - Add fastpath handling of HLT VM-Exit to expedite re-entering the
     guest when there's already a pending wake event at the time of the
     exit

   - Fix a WARN caused by RSM entering a nested guest from SMM with
     invalid guest state, by forcing the vCPU out of guest mode prior to
     signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
     nested guest)

   - Overhaul the "unprotect and retry" logic to more precisely identify
     cases where retrying is actually helpful, and to harden all retry
     paths against putting the guest into an infinite retry loop

   - Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
     rmaps in the shadow MMU

   - Refactor pieces of the shadow MMU related to aging SPTEs in
     prepartion for adding multi generation LRU support in KVM

   - Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
     enabled, i.e. when the CPU has already flushed the RSB

   - Trace the per-CPU host save area as a VMCB pointer to improve
     readability and cleanup the retrieval of the SEV-ES host save area

   - Remove unnecessary accounting of temporary nested VMCB related
     allocations

   - Set FINAL/PAGE in the page fault error code for EPT violations if
     and only if the GVA is valid. If the GVA is NOT valid, there is no
     guest-side page table walk and so stuffing paging related metadata
     is nonsensical

   - Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
     instead of emulating posted interrupt delivery to L2

   - Add a lockdep assertion to detect unsafe accesses of vmcs12
     structures

   - Harden eVMCS loading against an impossible NULL pointer deref
     (really truly should be impossible)

   - Minor SGX fix and a cleanup

   - Misc cleanups

  Generic:

   - Register KVM's cpuhp and syscore callbacks when enabling
     virtualization in hardware, as the sole purpose of said callbacks
     is to disable and re-enable virtualization as needed

   - Enable virtualization when KVM is loaded, not right before the
     first VM is created

     Together with the previous change, this simplifies a lot the logic
     of the callbacks, because their very existence implies
     virtualization is enabled

   - Fix a bug that results in KVM prematurely exiting to userspace for
     coalesced MMIO/PIO in many cases, clean up the related code, and
     add a testcase

   - Fix a bug in kvm_clear_guest() where it would trigger a buffer
     overflow _if_ the gpa+len crosses a page boundary, which thankfully
     is guaranteed to not happen in the current code base. Add WARNs in
     more helpers that read/write guest memory to detect similar bugs

  Selftests:

   - Fix a goof that caused some Hyper-V tests to be skipped when run on
     bare metal, i.e. NOT in a VM

   - Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
     guest

   - Explicitly include one-off assets in .gitignore. Past Sean was
     completely wrong about not being able to detect missing .gitignore
     entries

   - Verify userspace single-stepping works when KVM happens to handle a
     VM-Exit in its fastpath

   - Misc cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
  Documentation: KVM: fix warning in "make htmldocs"
  s390: Enable KVM_S390_UCONTROL config in debug_defconfig
  selftests: kvm: s390: Add VM run test case
  KVM: SVM: let alternatives handle the cases when RSB filling is required
  KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
  KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
  KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
  KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
  KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
  KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
  KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
  KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
  KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
  KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
  KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
  KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
  KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
  KVM: x86: Update retry protection fields when forcing retry on emulation failure
  KVM: x86: Apply retry protection to "unprotect on failure" path
  KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
  ...