- 13 May, 2015 13 commits
-
-
Mauro Carvalho Chehab authored
rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(), to be coherent with the other debug macro changes. Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
use just one macro instead of 2, naming it as audio_dbg() and using pr_fmt(). Signed-off-by: -
Mauro Carvalho Chehab authored
instead of using dev->name, let's use pr_fmt() like on the other parts of saa7134. Also, rename the debug macro to ts_dbg() to match the namespace for the debug macros. Signed-off-by: -
Mauro Carvalho Chehab authored
Converting debug prints to use pr_foo() is not trivial, as the result will be a way worse than what's provided here, due to the pieces of the code that prints the I2C transfers. Those use a lot pr_cont(), and, depending on using either level 1 or 2, a different set of macros are selected. So, let's replace d1printk() and d2printk() macros by i2c_dbg() and i2c_count() adding a debug level there. Signed-off-by: -
Mauro Carvalho Chehab authored
On media drivers, debugging messages should be grouped into categories, as this makes easier to debug the driver. In the case of saa7134, the core has 2 debug categories, one for IRQ, and another one for the core itself. The IRQ have actually 2 levels of debug. So, instead of using pr_dbg(), where everything would be in the same box, let's define two macros that use pr_fmt(), one for the core, and another one for irq. With that, we can replace the remaining printk() occurrences at the core to use either core_dbg() or irq_dbg(), depending on the group of debug macros that need to be enabled. Signed-off-by: -
Mauro Carvalho Chehab authored
On a few places, mostly during board detection, some printk() macros were called without especifying any message level. Those are actually warnings. So, use pr_warn() for them. Signed-off-by: -
Mauro Carvalho Chehab authored
As this module doesn't use any debug level, it is easy to just replace all debug printks by pr_debug(). Signed-off-by: -
Mauro Carvalho Chehab authored
As this module doesn't use any debug level, it is easy to just replace all debug printks by pr_debug(). Signed-off-by: -
Mauro Carvalho Chehab authored
wprintk() macro is now just a wrapper for pr_warn(). Get rid of it! Signed-off-by: -
Mauro Carvalho Chehab authored
On saa7134-alsa, there is just one printk macro that use a different debug level. It should be easy to enable/disable this one using dynamic_printk, if one need to individually control it. So, this module can easily use pr_debug() instead of using its own macros. Signed-off-by: -
Mauro Carvalho Chehab authored
On a few places, the search expression used on the script that replaced pr_info/pr_warn didn't match, because the string were on the next line. It is best to manually edit those lines, and re-indent the paragraphs. Signed-off-by: -
Mauro Carvalho Chehab authored
Replaces all occurrences of printk with KERN_INFO, KERN_WARNING and KERN_ERR to pr_info/pr_warning, pr_err, using this small shell script: for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
Add a pr_fmt macro, and move saa7134.h header to the beginning, to avoid warnings when using the pr_foo macros. Signed-off-by:
-
- 12 May, 2015 24 commits
-
-
David Härdeman authored
commit af3a4a9b ("[media] dib0700: NEC scancode cleanup") cleaned up the NEC scancode logic but overlooked the RC5 case. This patch brings the RC5 case in line with the NEC code and makes the struct self-documenting. Signed-off-by:
David Härdeman <david@hardeman.nu> Reported-by:
David Cimbůrek <david.cimburek@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
This driver does not use any PCI IDs, don't include the pci_ids.h header. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function platform_device_register_data() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Christian Engelmayer authored
Commit 307e95c9 ("[media] mn88472: implement firmware parity check") introduced the usage of exit paths that do not free the already allocated firmware data in case the parity handling fails. Go through the correct exit paths. Detected by Coverity CID 1295989. Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Acked-by:
Benjamin Larsson <benjamin@southpole.se> Signed-off-by:
-
Olli Salonen authored
GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner. It's based on the following components: - USB bridge: RTL2832P (contains also DVB-T demodulator) - Demodulator: Si2168-A30 - Tuner: Si2148-A20 The demodulator and the tuner will need firmwares. The Si2148 uses Si2158 firmware. Antti has the firmwares available for download: http://palosaari.fi/linux/v4l-dvb/firmware/ Do note that for DVB-T either of the demodulators can be used. DVB-C and DVB-T2 are only supported by the Si2168 demodulator. The driver will register 2 frontends for the same adapter. Frontend 0 will be the RTL2832 demodulator and frontend 1 will be the Si2168 demodulator. The same tuner is used for both. As a consequence of the above, it's recommended to use application that does implement proper DVBv5 support. For some reason, the old I2C write method sporadically fails. Thus the need for an option to only use the new I2C write method supported by the RTL2832. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
Olli Salonen authored
Add support for I2C read operation without a preceeding write. While here, change the error code to EOPNOTSUPP in case an unsupported I2C operation is attempted. Signed-off-by:
-
Olli Salonen authored
The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by:
-
Olli Salonen authored
Return error from si2168_cmd_execute in case the demodulator returns an error. Signed-off-by:
-
Olli Salonen authored
Change the dvbsky driver to support gapped clock instead of the current hack. Signed-off-by:
-
Olli Salonen authored
Add a parameter in si2168_config to support gapped clock. This might be necessary on some devices with higher bitrates. Signed-off-by:
-
Silvan Jegen authored
Remove dead code, make goto label names more expressive and add a label in order to call mantis_dvb_exit if mantis_uart_init fails. Also make sure that mantis_pci_exit is called if we fail the mantis_stream_control call and that we call mantis_i2c_exit if mantis_get_mac fails. [mchehab@osg.samsung.com: fix merge conflict] Signed-off-by:
Silvan Jegen <s.jegen@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Olli Salonen authored
TeVii S482 is a PCIe device with two tuners that actually contains two USB devices. The devices are visible in the lsusb printout. Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd. Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd. The device itself works exactly with the same settings as TechnoTrend TT-connect S2-4600. Firmware for DS3103 demodulator is required: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ This patch should be applied on top of the TT S2-4600 patch: https://patchwork.linuxtv.org/patch/28818/Signed-off-by:
-
Hans Verkuil authored
The RGB444 format swapped the red and blue components, fix this. Rather than making a new BGR444 format (as I proposed initially), Jon prefers to just fix this and return the colors in the right order. I think that makes sense in this case. Since the RGB444 pixel format is deprecated due to the ambiguous specification of the alpha component we use the XRGB444 pixel format instead (specified as having no alpha channel). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Lad, Prabhakar authored
Instead of parsing the link-frequencies property in the driver, let v4l2_of_alloc_parse_endpoint() do it. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) [mchehab@osg.samsung.com: fix a merge conflict at adv7604.c] Signed-off-by:
Fabian Frederick <fabf@skynet.be> Acked-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Philipp Zabel authored
Setting the last buffer flag causes the videobuf2 core to return -EPIPE from DQBUF calls on the capture queue after the last buffer is dequeued. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
Setting the last buffer flag causes the videobuf2 core to return -EPIPE from DQBUF calls on the capture queue after the last buffer is dequeued. This patch also fixes the EOS event to conform to the specification. It now is sent right after the last buffer has been decoded instead of when the last buffer is dequeued. Signed-off-by:
-
Philipp Zabel authored
If the last buffer was dequeued from a capture queue, let poll return immediately and let DQBUF return -EPIPE to signal there will no more buffers to dequeue until STREAMOFF. The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST. To reenable dequeuing on the capture queue, the driver must explicitly call vb2_clear_last_buffer_queued. The last buffer queued flag is cleared automatically during STREAMOFF. Signed-off-by:
-
Peter Seiderer authored
This v4l2_buffer flag can be used by drivers to mark a capture buffer as the last generated buffer, for example after a V4L2_DEC_CMD_STOP command was issued. Signed-off-by:
Peter Seiderer <ps.report@gmx.net> Signed-off-by:
-
Philipp Zabel authored
Document the interaction between VIDIOC_DECODER_CMD V4L2_DEC_CMD_STOP and VIDIOC_ENCODER_CMD V4L2_ENC_CMD_STOP to start the draining, the V4L2_EVENT_EOS event signalling all capture buffers are finished and ready to be dequeud, the new V4L2_BUF_FLAG_LAST buffer flag indicating the last buffer being dequeued from the capture queue, and the poll and VIDIOC_DQBUF ioctl return values once the queue is drained. Signed-off-by:
-
Krzysztof Kozlowski authored
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> [k.debski@samsung.com: Fix misspelling in title (s/sp5/s5p/)] Signed-off-by:
-
Krzysztof Kozlowski authored
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by:
-
Krzysztof Kozlowski authored
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by:
-
Krzysztof Kozlowski authored
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by:
-
- 11 May, 2015 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.1-rc3 * tag 'v4.1-rc3': (381 commits) Linux 4.1-rc3 drm: Zero out invalid vblank timestamp in drm_update_vblank_count. m32r: make flush_cpumask non-volatile. mnt: Fix fs_fully_visible to verify the root directory is visible path_openat(): fix double fput() namei: d_is_negative() should be checked before ->d_seq validation ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow ARM: dts: Fix typo in trip point temperature for exynos5420/5440 ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420 MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA drm/tegra: Don't use vblank_disable_immediate on incapable driver. mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE mmc: dw_mmc: init desc in dw_mci_idmac_init ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec ...
-
- 10 May, 2015 2 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "I really need to get back to sending these on my Friday, instead of my Monday morning, but nothing too amazing in here: a few amdkfd fixes, a few radeon fixes, i915 fixes, one tegra fix and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. drm/tegra: Don't use vblank_disable_immediate on incapable driver. drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
-
