If there are no items in the extent status tree, ext4_es_lru_add() is
a no-op.  So it is not sufficient to call ext4_es_lru_add() before we
try to lookup an entry in the extent status tree.  We also need to
call it at the end of ext4_ext_map_blocks(), after items have been
added to the extent status tree.

This could lead to inodes with that have extent status trees but which
are not in the LRU list, which means they won't get considered for
eviction by the es_shrinker.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org

During large unlink operations on files with extents, we can use a lot
of CPU time.  This adds a cond_resched() call when starting to examine
the next level of a multi-level extent tree.  Multi-level extent trees
are rare in the first place, and this should rarely be executed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Some callers of ext4_es_remove_extent() and ext4_es_insert_extent()
may not be completely robust against ENOMEM failures (or the
consequences of reflecting ENOMEM back up to userspace may lead to
xfstest or user application failure).

To mitigate against this, when trying to insert an entry in the extent
status tree, try to shrink the inode's extent status tree before
returning ENOMEM.  If there are entries which don't record information
about extents under delayed allocations, freeing one of them is
preferable to returning ENOMEM.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>

In ext4_ext_map_blocks(), if we have successfully allocated the data
blocks, but then run into trouble inserting the extent into the extent
tree, most likely due to an ENOSPC condition, determine the arguments
to ext4_free_blocks() in a simpler way which is easier to prove to be
correct.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Previously ext4_ext_truncate() was ignoring potential error returns
from ext4_es_remove_extent() and ext4_ext_remove_space().  This can
lead to the on-diks extent tree and the extent status tree cache
getting out of sync, which is particuarlly bad, and can lead to file
system corruption and potential data loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory.  Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS.  And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.
Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Replace "assertation" with "assertion" in lots and lots of debugging
messages.

Correct the comment stating when ext4_es_insert_extent() is used.  It
was no doubt tree at one point, but it is no longer true...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>

If there are a lot of outstanding buffered IOs when a device is
taken offline (due to hardware errors etc), ext4_end_bio prints
out a message for each failed logical block. While this is desirable,
we see thousands of such lines being printed out before the
serial console gets overwhelmed, causing ext4_end_bio() wait for
the printk to complete.

This in itself isn't a disaster, except for the detail that this
function is being called with the queue lock held.
This causes any other function in the block layer
to spin on its spin_lock_irqsave while the serial console is
draining. If NMI watchdog is enabled on this machine then it
eventually comes along and shoots the machine in the head.

The end result is that losing any one disk causes the machine to
go down. This patch rate limits the printk to bandaid around the
problem.

Tested: xfstests
Change-Id: I8ab5690dcf4f3a67e78be147d45e489fdf4a88d8
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We now print mount options in a generic fashion in
ext4_show_options(), so we shouldn't be explicitly printing the
{usr,grp}quota options in ext4_show_quota_options().

Without this patch, /proc/mounts can look like this:

 /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0
                                      ^^^^^^^^              ^^^^^^^^
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

The following race can lead to ext4_evict_inode() seeing i_ioend_count
> 0 and thus triggering a sanity check warning:

        CPU1                                    CPU2
ext4_end_bio()                          ext4_evict_inode()
  ext4_finish_bio()
    end_page_writeback();
                                          truncate_inode_pages()
                                            evict page
                                        WARN_ON(i_ioend_count > 0);
  ext4_put_io_end_defer()
    ext4_release_io_end()
      dec i_ioend_count

This is possible use-after-free bug since we decrement i_ioend_count in
possibly released inode.

Since i_ioend_count is used only for sanity checks one possible solution
would be to just remove it but for now I'd like to keep those sanity
checks to help debugging the new ext4 writeback code.

This patch changes ext4_end_bio() to call ext4_put_io_end_defer() before
ext4_finish_bio() in the shortcut case when unwritten extent conversion
isn't needed.  In that case we don't need the io_end so we are safe to
drop it early.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e.  Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero).  This could cause the
following kernel BUG:

[  568.877799] ------------[ cut here ]------------
[  568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[  568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[  568.877845] SMP NR_CPUS=32 NUMA pSeries
[  568.877852] Modules linked in: binfmt_misc
[  568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809ff-dirty #1
[  568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[  568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[  568.877879] REGS: c0000001fa956ed0 TRAP: 0700   Not tainted  (3.10.0-03216-g7c6809ff-dirty)
[  568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 24000428  XER: 00000000
[  568.877902] SOFTE: 1
[  568.877905] CFAR: c0000000002b5464
[  568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[  568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[  568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[  568.878004] Call Trace:
[  568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[  568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[  568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[  568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[  568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[  568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[  568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[  568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[  568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[  568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[  568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[  568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[  568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[  568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[  568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[  568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[  568.878125] Instruction dump:
[  568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[  568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[  568.878160] ---[ end trace 594d911d9654770b ]---

In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org  # 3.10

The loop in mpage_map_and_submit_extent() is guaranteed to always run
at least once since the caller of mpage_map_and_submit_extent() makes
sure map->m_len > 0. So make that explicit using do-while instead of
pure while which also silences the compiler warning about
uninitialized 'err' variable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>

Both hole punch and truncate use ext4_ext_rm_leaf() for removing
blocks.  Currently we choose the last extent as the starting
point for removing blocks:

	ex = EXT_LAST_EXTENT(eh);

This is OK for truncate but for hole punch we can optimize the extent
selection as the path is already initialized.  We could use this
information to select proper starting extent.  The code change in this
patch will not affect truncate as for truncate path[depth].p_ext will
always be NULL.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If jbd2_journal_restart() fails the handle will have been disconnected
from the current transaction.  In this situation, the handle must not
be used for for any jbd2 function other than jbd2_journal_stop().
Enforce this with by treating a handle which has a NULL transaction
pointer as an aborted handle, and issue a kernel warning if
jbd2_journal_extent(), jbd2_journal_get_write_access(),
jbd2_journal_dirty_metadata(), etc. is called with an invalid handle.

This commit also fixes a bug where jbd2_journal_stop() would trip over
a kernel jbd2 assertion check when trying to free an invalid handle.

Also move the responsibility of setting current->journal_info to
start_this_handle(), simplifying the three users of this function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Younger Liu <younger.liu@huawei.com>
Cc: Jan Kara <jack@suse.cz>

Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.

Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help.  Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.

Fix this by checking whether the range covers the whole block skip
zeroing if so.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The function ext4_write_inline_data_end() can return an error.  So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org

Comparing unsigned variable with 0 always returns false.
err = 0 is duplicated and unnecessary.

[ tytso: Also cleaned up error handling in ext4_block_zero_page_range() ]
Signed-off-by: "Jon Ernst" <jonernst07@gmx.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock().  Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org

No need to pass file pointer when we can directly pass inode pointer.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

In ext4 feature inline_data,it use the xattr's space to store the
inline data in inode.When we calculate the inline data as the xattr,we
add the pad.But in get_max_inline_xattr_value_size() function we count
the free space without pad.It cause some contents are moved to a block
even if it can be
stored in the inode.
Signed-off-by: liulei <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>

Reduce the object size ~10% could be useful for embedded systems.

Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and
arguments, passing " " to functions when !CONFIG_PRINTK and still
verifying format and arguments with no_printk.

$ size fs/ext4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 239375	    610	    888	 240873	  3ace9	fs/ext4/built-in.o.new
 264167	    738	    888	 265793	  40e41	fs/ext4/built-in.o.old

    $ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config
    # CONFIG_PRINTK is not set
    CONFIG_EXT4_FS=y
    CONFIG_EXT4_USE_FOR_EXT23=y
    CONFIG_EXT4_FS_POSIX_ACL=y
    # CONFIG_EXT4_FS_SECURITY is not set
    # CONFIG_EXT4_DEBUG is not set
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure.  For
keeping this order, a spin lock is used to protect this list.  But this
lock burns a lot of CPU time.  We can use the following steps to trigger
it.

  % cd /dev/shm
  % dd if=/dev/zero of=ext4-img bs=1M count=2k
  % mkfs.ext4 ext4-img
  % mount -t ext4 -o loop ext4-img /mnt
  % cd /mnt
  % for ((i=0;i<160;i++)); do truncate -s 64g $i; done
  % for ((i=0;i<160;i++)); do cp $i /dev/null &; done
  % perf record -a -g
  % perf report

This commit tries to fix this problem.  Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode.  Meanwhile we never need to keep a proper in-order
LRU list.  So this can avoid to burns some CPU time.  When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list.  Then we traverse this list to discard some
entries.  In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list.  When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list.  When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.

In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.

Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If memory allocation in ext4_mb_new_group_pa() is failed,
it returns error code, ext4_mb_new_preallocation() propages it,
but ext4_mb_new_blocks() ignores it.

An observed result was:

- allocation fail means ext4_mb_new_group_pa() does not update
  ext4_allocation_context;

- ext4_mb_new_blocks() sets ext4_allocation_request->len (ar->len =
  ac->ac_b_ex.fe_len;) to number of blocks preallocated (512) instead
  of number of blocks requested (1);

- that activates update cycle in ext4_splice_branch():
    for (i = 1; i < blks; i++) <-- blks is 512 instead of 1 here
      *(where->p + i) = cpu_to_le32(current_block++);

- it iterates 511 times and corrupts a chunk of memory including inode
  structure;

- page fault happens at EXT4_SB(inode->i_sb) in ext4_mark_inode_dirty();

- system hangs with 'scheduling while atomic' BUG.

The patch implements a check for ext4_mb_new_preallocation() error
code and handles its failure as if ext4_mb_regular_allocator() fails.

Found by Linux File System Verification project (linuxtesting.org).

[ Patch restructed by tytso to make the flow of control easier to follow. ]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Subtracting the number of the first data block places the superblock
backups one block too early, corrupting the file system. When the block
size is larger than 1K, the first data block is 0, so the subtraction
has no effect and no corruption occurs.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org

This patch removed several unused variables.
Signed-off-by: Jon Ernst <jonernst07@gmx.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Return the FIEMAP_EXTENT_UNKNOWN flag as well except the
FIEMAP_EXTENT_DELALLOC because the data location of an
delayed allocation extent is unknown.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>

Commit b6e96d00 ("jbd2: use module parameters instead of debugfs
for jbd_debug") removed any need for a dependency on DEBUG_FS.  It
also moved the /sys variables out from underneath the typical debugfs
mount point.  Delete the dependency and update the /sys path to where
the debug settings are currently.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Since the jbd_debug() is implemented with two separate printk()
calls, it can lead to corrupted and misleading debug output like
the following (see lines marked with "*"):

[  290.339362] (fs/jbd2/journal.c, 203): kjournald2: kjournald2 wakes
[  290.339365] (fs/jbd2/journal.c, 155): kjournald2: commit_sequence=42103, commit_request=42104
[  290.339369] (fs/jbd2/journal.c, 158): kjournald2: OK, requests differ
[* 290.339376] (fs/jbd2/journal.c, 648): jbd2_log_wait_commit:
[* 290.339379] (fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: want 42104, j_commit_sequence=42103
[* 290.339382] JBD2: starting commit of transaction 42104
[  290.339410] (fs/jbd2/revoke.c, 566): jbd2_journal_write_revoke_records: Wrote 0 revoke records
[  290.376555] (fs/jbd2/commit.c, 1088): jbd2_journal_commit_transaction: JBD2: commit 42104 complete, head 42079

i.e. the debug output from log_wait_commit and journal_commit_transaction
have become interleaved.  The output should have been:

(fs/jbd2/journal.c, 648): jbd2_log_wait_commit: JBD2: want 42104, j_commit_sequence=42103
(fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: starting commit of transaction 42104

It is expected that this is not easy to replicate -- I was only able
to cause it on preempt-rt kernels, and even then only under heavy
I/O load.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The bit_spinlock functions are only used for the jbd_lock_bh_state
functions (and friends) in jbd_common.h and are not directly used
by either of jbd.h or jbd2.h content.

The jbd_common file is new as of commit 44606672 ("jdb/jbd2: factor
out common functions from the jbd[2] header files") but common
(and isolated) headers were not considered for factoring at that time.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Currently we see this output:

  $git grep phase fs/jbd2
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 1\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 2\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 2\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 3\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 4\n");
  [...]

There is clearly a duplicate label for phase 2, and they are
both active (i.e. not in #if ... #else block).  Rename them to
be "2a" and "2b" so the debug output is unambiguous.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

While trying to debug an an issue under extreme I/O loading
on preempt-rt kernels, the following backtrace was observed
via SysRQ output:

rm              D ffff8802203afbc0  4600  4878   4748 0x00000000
 ffff8802217bfb78 0000000000000082 ffff88021fc2bb80 ffff88021fc2bb80
 ffff88021fc2bb80 ffff8802217bffd8 ffff8802217bffd8 ffff8802217bffd8
 ffff88021f1d4c80 ffff88021fc2bb80 ffff8802217bfb88 ffff88022437b000
Call Trace:
 [<ffffffff8172dc34>] schedule+0x24/0x70
 [<ffffffff81225b5d>] jbd2_log_wait_commit+0xbd/0x140
 [<ffffffff81060390>] ? __init_waitqueue_head+0x50/0x50
 [<ffffffff81223635>] jbd2_log_do_checkpoint+0xf5/0x520
 [<ffffffff81223b09>] __jbd2_log_wait_for_space+0xa9/0x1f0
 [<ffffffff8121dc40>] start_this_handle.isra.10+0x2e0/0x530
 [<ffffffff81060390>] ? __init_waitqueue_head+0x50/0x50
 [<ffffffff8121e0a3>] jbd2__journal_start+0xc3/0x110
 [<ffffffff811de7ce>] ? ext4_rmdir+0x6e/0x230
 [<ffffffff8121e0fe>] jbd2_journal_start+0xe/0x10
 [<ffffffff811f308b>] ext4_journal_start_sb+0x5b/0x160
 [<ffffffff811de7ce>] ext4_rmdir+0x6e/0x230
 [<ffffffff811435c5>] vfs_rmdir+0xd5/0x140
 [<ffffffff8114370f>] do_rmdir+0xdf/0x120
 [<ffffffff8105c6b4>] ? task_work_run+0x44/0x80
 [<ffffffff81002889>] ? do_notify_resume+0x89/0x100
 [<ffffffff817361ae>] ? int_signal+0x12/0x17
 [<ffffffff81145d85>] sys_unlinkat+0x25/0x40
 [<ffffffff81735f22>] system_call_fastpath+0x16/0x1b

What is interesting here, is that we call log_wait_commit, from
within wait_for_space, but we are still holding the checkpoint_mutex
as it surrounds mostly the whole of wait_for_space.  And then, as we
are waiting, journal_commit_transaction can run, and if the JBD2_FLUSHED
bit is set, then we will also try to take the same checkpoint_mutex.

It seems that we need to drop the checkpoint_mutex while sitting in
jbd2_log_wait_commit, if we want to guarantee that progress can be made
by jbd2_journal_commit_transaction().  There does not seem to be
anything preempt-rt specific about this, other then perhaps increasing
the odds of it happening.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The state lock is taken after we are doing an assert on the state
value, not before.  So we might in fact be doing an assert on a
transient value.  Ensure the state check is within the scope of
the state lock being taken.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If filesystem was aborted after inode's write back is complete
but before its metadata was updated we may return success
results in data loss.
In order to handle fs abort correctly we have to check
fs state once we discover that it is in MS_RDONLY state

Test case: http://patchwork.ozlabs.org/patch/244297Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Inode's data or non journaled quota may be written w/o jounral so we
_must_ send a barrier at the end of ext4_sync_fs. But it can be
skipped if journal commit will do it for us.

Also fix data integrity for nojournal mode.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Current implementation of jbd2_journal_force_commit() is suboptimal because
result in empty and useless commits. But callers just want to force and wait
any unfinished commits. We already have jbd2_journal_force_commit_nested()
which does exactly what we want, except we are guaranteed that we do not hold
journal transaction open.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Commit 18888cf0: "ext4: speed up truncate/unlink by not using
bforget() unless needed" removed the use of EXT4_FREE_BLOCKS_FORGET in
the most important codepath for file systems using extents, but a
similar optimization also can be done for file systems using indirect
blocks, and for the two special cases in the ext4 extents code.

Cc: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>