- 12 Oct, 2023 40 commits
-
-
Filipe Manana authored
btrfs_realloc_node() is only used by the defrag code. Nowadays we have a defrag.c file, so move it, and its helper close_blocks(), into defrag.c. During the move also do a few minor cosmetic changes: 1) Change the return value of close_blocks() from int to bool; 2) Use SZ_32K instead of 32768 at close_blocks(); 3) Make some variables const in btrfs_realloc_node(), 'blocksize' and 'end_slot'; 4) Get rid of 'parent_nritems' variable, in both places where it was used it could be replaced by calling btrfs_header_nritems(parent); 5) Change the type of a couple variables from int to bool; 6) Rename variable 'err' to 'ret', as that's the most common name we use to track the return value of a function; 7) Move some variables from the top scope to the scope of the for loop where they are used. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
Export comp_keys() out of ctree.c, as btrfs_comp_keys(), so that in a later patch we can move out defrag specific code from ctree.c into defrag.c. Signed-off-by:
-
Filipe Manana authored
Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is to allow to move defrag specific code out of ctree.c and into defrag.c in one of the next patches. Signed-off-by:
-
Filipe Manana authored
At btrfs_cow_block() we can use round_down() to align the extent buffer's logical offset to the start offset of a metadata block group, instead of the less easy to read set of bitwise operations (two plus one subtraction). So replace the bitwise operations with a round_down() call. Signed-off-by:
-
Filipe Manana authored
It's pointless to have the noiline attribute for btrfs_cow_block(), as the function is exported and widely used. So remove it. Signed-off-by:
-
Anand Jain authored
Previous commit ("btrfs: reject devices with CHANGING_FSID_V2") has stopped the assembly of devices with the CHANGING_FSID_V2 flag in the kernel. Such devices can be scanned but will not be registered and can't be mounted without a manual fix by btrfstune. Remove the related logic and now unused code. The original motivation was to allow an interrupted partial conversion fix itself on next mount, in case the system has to be rebooted. This is a convenience but brings a lot of complexity the device scanning and handling the partial states. It's hard to estimate if this was ever needed in practice, expecting the typical use case like a manual conversion of an unmounted filesystem where the user can verify the success and rerun it eventually. Signed-off-by:Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
The BTRFS_SUPER_FLAG_CHANGING_FSID_V2 flag indicates a transient state where the device in the userspace btrfstune -m|-M operation failed to complete changing the fsid. This flag makes the kernel to automatically determine the other partner devices to which a given device can be associated, based on the fsid, metadata_uuid and generation values. btrfstune -m|M feature is especially useful in virtual cloud setups, where compute instances (disk images) are quickly copied, fsid changed, and launched. Given numerous disk images with the same metadata_uuid but different fsid, there's no clear way a device can be correctly assembled with the proper partners when the CHANGING_FSID_V2 flag is set. So, the disk could be assembled incorrectly, as in the example below: Before this patch: Consider the following two filesystems: /dev/loop[2-3] are raw copies of /dev/loop[0-1] and the btrsftune -m operation fails. In this scenario, as the /dev/loop0's fsid change is interrupted, and the CHANGING_FSID_V2 flag is set as shown below. $ p="device|devid|^metadata_uuid|^fsid|^incom|^generation|^flags" $ btrfs inspect dump-super /dev/loop0 | egrep '$p' superblock: bytenr=65536, device=/dev/loop0 flags 0x1000000001 fsid 7d4b4b93-2b27-4432-b4e4-4be1fbccbd45 metadata_uuid bb040a9f-233a-4de2-ad84-49aa5a28059b generation 9 num_devices 2 incompat_flags 0x741 dev_item.devid 1 $ btrfs inspect dump-super /dev/loop1 | egrep '$p' superblock: bytenr=65536, device=/dev/loop1 flags 0x1 fsid 11d2af4d-1b71-45a9-83f6-f2100766939d metadata_uuid bb040a9f-233a-4de2-ad84-49aa5a28059b generation 10 num_devices 2 incompat_flags 0x741 dev_item.devid 2 $ btrfs inspect dump-super /dev/loop2 | egrep '$p' superblock: bytenr=65536, device=/dev/loop2 flags 0x1 fsid 7d4b4b93-2b27-4432-b4e4-4be1fbccbd45 metadata_uuid bb040a9f-233a-4de2-ad84-49aa5a28059b generation 8 num_devices 2 incompat_flags 0x741 dev_item.devid 1 $ btrfs inspect dump-super /dev/loop3 | egrep '$p' superblock: bytenr=65536, device=/dev/loop3 flags 0x1 fsid 7d4b4b93-2b27-4432-b4e4-4be1fbccbd45 metadata_uuid bb040a9f-233a-4de2-ad84-49aa5a28059b generation 8 num_devices 2 incompat_flags 0x741 dev_item.devid 2 It is normal that some devices aren't instantly discovered during system boot or iSCSI discovery. The controlled scan below demonstrates this. $ btrfs device scan --forget $ btrfs device scan /dev/loop0 Scanning for btrfs filesystems on '/dev/loop0' $ mount /dev/loop3 /btrfs $ btrfs filesystem show -m Label: none uuid: 7d4b4b93-2b27-4432-b4e4-4be1fbccbd45 Total devices 2 FS bytes used 144.00KiB devid 1 size 300.00MiB used 48.00MiB path /dev/loop0 devid 2 size 300.00MiB used 40.00MiB path /dev/loop3 /dev/loop0 and /dev/loop3 are incorrectly partnered. This kernel patch removes functions and code connected to the CHANGING_FSID_V2 flag. With this patch, now devices with the CHANGING_FSID_V2 flag are rejected. And its partner will fail to mount with the extra -o degraded option. The check is removed from open_ctree(), devices are rejected during scanning which in turn fails the mount. Signed-off-by:
-
David Sterba authored
Lots of the functions in relocation.c don't change pointer parameters but lack the annotations. Add them and reformat according to current coding style if needed. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
David Sterba authored
btrfs_should_ignore_reloc_root() is a predicate so it should return bool. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
David Sterba authored
The btrfs_backref_cache::is_reloc is an indicator variable and should use a bool type. Reviewed-by:
-
David Sterba authored
There's only one user of mapping_tree_init, we don't need a helper for the simple initialization. Reviewed-by:
-
David Sterba authored
Use bool types for the indicators instead of bitfields. The structure size slightly grows but the new types are placed within the padding. Reviewed-by:
-
David Sterba authored
Add an enum type for data relocation stages. Reviewed-by:
-
David Sterba authored
We don't need to use bitfields for tree_block::level and tree_block::key_ready, there's enough padding in the structure for proper types. Reviewed-by:
-
Filipe Manana authored
The btrfs_defrag_root() function does not really belong in the transaction.{c,h} module and as we have a defrag.{c,h} nowadays, move it to there instead. This also allows to stop exporting btrfs_defrag_leaves(), so we can make it static. Reviewed-by: -
Filipe Manana authored
The root argument for fixup_inode_link_count() always matches the root of the given inode, so remove the root argument and get it from the inode argument. This also applies to the helpers count_inode_extrefs() and count_inode_refs() used by fixup_inode_link_count() - they don't need the root argument, as it always matches the root of the inode passed to them. Reviewed-by:
-
Filipe Manana authored
The root argument for maybe_insert_hole() always matches the root of the given inode, so remove the root argument and get it from the inode argument. Reviewed-by:
-
Filipe Manana authored
The root argument for btrfs_delayed_update_inode() always matches the root of the given inode, so remove the root argument and get it from the inode argument. Reviewed-by:
-
Filipe Manana authored
The root argument for btrfs_update_inode_item() always matches the root of the given inode, so remove the root argument and get it from the inode argument. Reviewed-by:
-
Filipe Manana authored
The root argument for btrfs_update_inode() always matches the root of the given inode, so remove the root argument and get it from the inode argument. Reviewed-by:
-
Filipe Manana authored
The root argument for btrfs_update_inode_fallback() always matches the root of the given inode, so remove the root argument and get it from the inode argument. Reviewed-by:
-
Filipe Manana authored
The noinline attribute of btrfs_update_inode() is pointless as the function is exported and widely used, so remove it. Reviewed-by:
-
Filipe Manana authored
The following condition at btrfs_dirty_inode() is redundant: if (ret && (ret == -ENOSPC || ret == -EDQUOT)) The first check for a non-zero 'ret' value is pointless, we can simplify this to simply: if (ret == -ENOSPC || ret == -EDQUOT) Not only this makes it easier to read, it also slightly reduces the text size of the btrfs kernel module: $ size fs/btrfs/btrfs.ko.before text data bss dec hex filename 1641400 168265 16864 1826529 1bdee1 fs/btrfs/btrfs.ko.before $ size fs/btrfs/btrfs.ko.after text data bss dec hex filename 1641224 168181 16864 1826269 1bdddd fs/btrfs/btrfs.ko.after Reviewed-by: -
Boris Burkov authored
In open_ctree, we set BTRFS_FS_QUOTA_ENABLED as soon as we see a quota_root, as opposed to after we are done setting up the qgroup structures. In the quota_enable path, we wait until after the structures are set up. Likewise, in disable, we clear the bit before tearing down the structures. I feel that this organization is less surprising for the open_ctree path. I don't believe this fixes any actual bug, but avoids potential confusion when using btrfs_qgroup_mode in an intermediate state where we are enabled but haven't yet setup the qgroup status flags. It also avoids any risk of calling a qgroup function and attempting to use the qgroup rbtrees before they exist/are setup. This all occurs before we do rw setup, so I believe it should be mostly a no-op. Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
Boris Burkov authored
Relocation data allocations are quite tricky for simple quotas. The basic data relocation sequence is (ignoring details that aren't relevant to this fix): - create a fake relocation data fs root - create a fake relocation inode in that root - for each data extent: - preallocate a data extent on behalf of the fake inode - copy over the data - for each extent - swap the refs so that the original file extent now refers to the new extent item - drop the fake root, dropping its refs on the old extents, which lets us delete them. Done naively, this results in storing an extent item in the extent tree whose owner_ref points at the relocation data root and a no-op squota recording, since the reloc root is not a legit fstree. So far, that's OK. The problem comes when you do the swap, and leave an extent item owned by this bogus root as the real permanent extents of the file. If the file then drops that ref, we free it and no-op account that against the fake relocation root. Essentially, this means that relocation is simple quota "extent laundering", since we re-own the extents into a fake root. Simple quotas very intentionally doesn't have a mechanism for transferring ownership of extents, as that is exactly the complicated thing we are trying to avoid with the new design. Further, it cannot be correctly done in this case, since at the time you create the new "real" refs, there is no way to know which was the original owner before relocation unless we track it. Therefore, it makes more sense to trick the preallocation to handle relocation as a special case and note the proper owner ref from the beginning. That way, we never write out an extent item without the correct owner ref that it will eventually have. This could be done by wiring a special root parameter all the way through the allocation code path, but to avoid that special case touching all the code, take advantage of the serial nature of relocation to store the src root on the relocation root object. Then when we finish the prealloc, if it happens to be this case, prepare the delayed ref appropriately. We must also add logic to handle relocating adjacent extents with different owning roots. Those cannot be preallocated together in a cluster as it would lose the separate ownership information. This is obviously a smelly bit of code, but I think it is the best solution to the problem, given the relocation implementation. Signed-off-by: -
Boris Burkov authored
Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Boris Burkov authored
Simple quotas count extents only from the moment the feature is enabled. Therefore, if we do something like: 1. create subvol S 2. write F in S 3. enable quotas 4. remove F 5. write G in S then after 3. and 4. we would expect the simple quota usage of S to be 0 (putting aside some metadata extents that might be written) and after 5., it should be the size of G plus metadata. Therefore, we need to be able to determine whether a particular quota delta we are processing predates simple quota enablement. To do this, store the transaction id when quotas were enabled. In fs_info for immediate use and in the quota status item to make it recoverable on mount. When we see a delta, check if the generation of the extent item is less than that of quota enablement. If so, we should ignore the delta from this extent. Signed-off-by:
-
Boris Burkov authored
Consider the following sequence: - enable quotas - create subvol S id 256 at dir outer/ - create a qgroup 1/100 - add 0/256 (S's auto qgroup) to 1/100 - create subvol T id 257 at dir outer/inner/ With full qgroups, there is no relationship between 0/257 and either of 0/256 or 1/100. There is an inherit feature that the creator of inner/ can use to specify it ought to be in 1/100. Simple quotas are targeted at container isolation, where such automatic inheritance for not necessarily trusted/controlled nested subvol creation would be quite helpful. Therefore, add a new default behavior for simple quotas: when you create a nested subvol, automatically inherit as parents any parents of the qgroup of the subvol the new inode is going in. In our example, 257/0 would also be under 1/100, allowing easy control of a total quota over an arbitrary hierarchy of subvolumes. I think this _might_ be a generally useful behavior, so it could be interesting to put it behind a new inheritance flag that simple quotas always use while traditional quotas let the user specify, but this is a minimally intrusive change to start. Signed-off-by:
-
Boris Burkov authored
At the moment that we run delayed refs, we make the final ref-count based decision on creating/removing extent (and metadata) items. Therefore, it is exactly the spot to hook up simple quotas. There are a few important subtleties to the fields we must collect to accurately track simple quotas, particularly when removing an extent. When removing a data extent, the ref could be in any tree (due to reflink, for example) and so we need to recover the owning root id from the owner ref item. When removing a metadata extent, we know the owning root from the owner field in the header when we create the delayed ref, so we can recover it from there. We must also be careful to handle reservations properly to not leaked reserved space. The happy path is freeing the reservation when the simple quota delta runs on a data extent. If that doesn't happen, due to refs canceling out or some error, the ref head already has the must_insert_reserved machinery to handle this, so we piggy back on that and use it to clean up the reserved data. Signed-off-by:
-
Boris Burkov authored
Inline ref parsing is a bit tricky and relies on a decent amount of implicit information, so I think it is beneficial to have a helper function for reading the owner ref, if only to "document" the format, along with the write path. The main subtlety of note which I was missing by open-coding this was that it is important to check whether or not inline refs are present *at all*. i.e., if we are writing out a new extent under squotas, we will always use a big enough item for the inline ref and have it. However, it is possible that some random item predating squotas will not have any inline refs. In that case, trying to read the "type" field of the first inline ref will just be reading garbage in the form of whatever is in the next item. This will be used by the extent free-ing path, which looks up data extent owners as well as a relocation path which needs to grab the owner before relocating an extent. Signed-off-by:
-
Boris Burkov authored
In order to implement simple quota groups, we need to be able to associate a data extent with the subvolume that created it. Once you account for reflink, this information cannot be recovered without explicitly storing it. Options for storing it are: - a new key/item - a new extent inline ref item The former is backwards compatible, but wastes space, the latter is incompat, but is efficient in space and reuses the existing inline ref machinery, while only abusing it a tiny amount -- specifically, the new item is not a ref, per-se. Signed-off-by:
-
Boris Burkov authored
Simple quotas requires tracking the original creating root of any given extent. This gets complicated when multiple subvolumes create overlapping/contradictory refs in the same transaction. For example, due to modifying or deleting an extent while also snapshotting it. To resolve this in a general way, take advantage of the fact that we are essentially already tracking this for handling releasing reservations. The head ref coalesces the various refs and uses must_insert_reserved to check if it needs to create an extent/free reservation. Store the ref that set must_insert_reserved as the owning ref on the head ref. Note that this can result in writing an extent for the very first time with an owner different from its only ref, but it will look the same as if you first created it with the original owning ref, then added the other ref, then removed the owning ref. Signed-off-by:
-
Boris Burkov authored
While data extents require us to store additional inline refs to track the original owner on free, this information is available implicitly for metadata. It is found in the owner field of the header of the tree block. Even if other trees refer to this block and the original ref goes away, we will not rewrite that header field, so it will reliably give the original owner. In addition, there is a relocation case where a new data extent needs to have an owning root separate from the referring root wired through delayed refs. To use it for recording simple quota deltas, we need to wire this root id through from when we create the delayed ref until we fully process it. Store it in the generic btrfs_ref struct of the delayed ref. Signed-off-by:
-
Boris Burkov authored
commit 113479d5 ("btrfs: rename root fields in delayed refs structs") changed these from ref_root to owning_root. However, there are many circumstances where that name is not really accurate and the root on the ref struct _is_ the referring root. In general, these are not the owning root, though it does happen in some ref merging cases involving overwrites during snapshots and similar. Simple quotas cares quite a bit about tracking the original owner of an extent through delayed refs, so rename these back to free up the name for the real owning root (which will live on the generic btrfs_ref and the head ref) Reviewed-by:
-
Boris Burkov authored
Rather than re-computing shared/exclusive ownership based on backrefs and walking roots for implicit backrefs, simple quotas does an increment when creating an extent and a decrement when deleting it. Add the API for the extent item code to use to track those events. Signed-off-by:
-
Boris Burkov authored
Pull creating the qgroup earlier in the snapshot. This allows simple quotas qgroups to see all the metadata writes related to the snapshot being created and to be born with the root node accounted. Note this has an impact on transaction commit where the qgroup creation can do a lot of work, allocate memory and take locks. The change is done for correctness, potential performance issues will be fixed in the future. Signed-off-by:
-
Boris Burkov authored
The following sequence: enable simple quotas do some writes reserve space create ordered_extent release rsv (store rsv_bytes in OE, mark QGROUP_RESERVED bits) disable quotas enable simple quotas set qgroup rsv to 0 on all subvolumes ordered_extent finishes create delayed ref with rsv_bytes from before run delayed ref record_simple_quota_delta free rsv_bytes (0 -> -rsv_delta) results in us reliably underflowing the subvolume's qgroup rsv counter, because disabling/re-enabling quotas toggles reservation counters down to 0, but does not remove other file system state which represents successful acquisition of qgroup rsv space. Specifically metadata rsv counters on the root object and rsv_bytes on ordered_extent objects that have released their reservation as well as the corresponding QGROUP_RESERVED extent bits. Normal qgroups gets away with this, I believe because it forces more work to happen on transaction commit, but I am not certain it is totally safe from the ordered_extent/leaked extent bit variant. Simple quotas hits this reliably. The intent of the fix is to make disable take the time to clear that external to qgroups state as well: after flipping off the quota bit on fs_info, flush delalloc and ordered extents, clearing the extent bits along the way. This makes it so there are no ordered extents or meta prealloc hanging around from the first enablement period during the second. Reviewed-by: -
Boris Burkov authored
Add an entry in the features directory for the new incompat flag Signed-off-by:
-
Boris Burkov authored
Add a new sysfs file /sys/fs/btrfs/<uuid>/qgroups/mode which prints out the mode qgroups is running in. The possible modes are qgroup, and squota. If quotas are not enabled, then the qgroups directory will not exist, so don't handle that mode. Signed-off-by:
-
Boris Burkov authored
Add a new quota mode called "simple quotas". It can be enabled by the existing quota enable ioctl via a new command, and sets an incompat bit, as the implementation of simple quotas will make backwards incompatible changes to the disk format of the extent tree. Signed-off-by:
-
