The RAPL PMU counters do not interrupt on overflow.
Therefore, the kernel needs to poll the counters
to avoid missing an overflow. This patch adds
the hrtimer code to do this.

The timer interval is calculated at boot time
based on the power unit used by the HW.

There is one hrtimer per-cpu to handle the case
of multiple simultaneous use across cores on
the same package + hotplug CPU.

Thanks to Maria Dimakopoulou for her contributions
to this patch especially on the math aspects.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
[ Applied 32-bit build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-5-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

This patch adds a new uncore PMU to expose the Intel
RAPL energy consumption counters. Up to 3 counters,
each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge,
IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

  - power/energy-cores: power consumption of all cores on socket
  - power/energy-pkg: power consumption of all cores + LLc cache
  - power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J)
is exposed in sysfs for use by perf stat and other tools.
The files are:

	/sys/devices/power/events/energy-*.unit
	/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such
that it only works in system-wide mode. Measuring only
one CPU per socket is sufficient. The /sys/devices/power/cpumask
file can be used by tools to figure out which CPUs to monitor
by default. For instance, on a 2-socket system, 2 CPUs
(one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs).
The perf_events API exposes all RAPL counters as 64-bit integers
counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools
must convert the counts by multiplying them by 2^-32 to obtain
Joules. The reason for this is that the kernel avoids
doing floating point math whenever possible because it is
expensive (user floating-point state must be saved). The method
used avoids kernel floating-point usage. There is no loss of
precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
   W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the
perf_event core subsystem. The PMU type (attr->type) is
dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no
privilege level filtering either.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

This patch adds perf stat support for handling event units and
scales as exported by the kernel.

The kernel can export PMU events actual unit and scaling factor
via sysfs:

  $ ls -1 /sys/devices/power/events/energy-*
  /sys/devices/power/events/energy-cores
  /sys/devices/power/events/energy-cores.scale
  /sys/devices/power/events/energy-cores.unit
  /sys/devices/power/events/energy-pkg
  /sys/devices/power/events/energy-pkg.scale
  /sys/devices/power/events/energy-pkg.unit
  $ cat /sys/devices/power/events/energy-cores.scale
  2.3283064365386962890625e-10
  $ cat cat /sys/devices/power/events/energy-cores.unit
  Joules

This patch modifies the pmu event alias code to check
for the presence of the .unit and .scale files to load
the corresponding values. They are then used by perf stat
transparently:

   # perf stat -a -e power/energy-pkg/,power/energy-cores/,cycles -I 1000 sleep 1000
   #          time             counts   unit events
       1.000214717               3.07 Joules power/energy-pkg/         [100.00%]
       1.000214717               0.53 Joules power/energy-cores/
       1.000214717           12965028        cycles                    [100.00%]
       2.000749289               3.01 Joules power/energy-pkg/
       2.000749289               0.52 Joules power/energy-cores/
       2.000749289           15817043        cycles

When the event does not have an explicit unit exported by
the kernel, nothing is printed. In csv output mode, there
will be an empty field.

Special thanks to Jiri for providing the supporting code
in the parser to trigger reading of the scale and unit files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/1384275531-10892-3-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

This patch adds a new field to the struct perf_event.
It is intended to be used to chain events which are
active (enabled). It helps in the hardware layer
for PMUs which do not have actual counter restrictions, i.e.,
free running read-only counters. Active events are chained
as opposed to being tracked via the counter they use.

To save space we use a union with hlist_entry as both
are mutually exclusive (suggested by Jiri Olsa).
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-2-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes cleanups from Oleg Nesterov.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Document xol_area and arch_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

1. Don't include asm/uprobes.h unconditionally, we only need
   it if CONFIG_UPROBES.

2. Move the definition of "struct xol_area" into uprobes.c.

   Perhaps we should simply kill struct uprobes_state, it buys
   nothing.

3. Kill the dummy definition of uprobe_get_swbp_addr(), nobody
   except handle_swbp() needs it.

4. Purely cosmetic, but move the decl of uprobe_get_swbp_addr()
   up, close to other __weak helpers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

powerpc has both arch_uprobe->insn and arch_uprobe->ainsn to
make the generic code happy. This is no longer needed after
the previous change, powerpc can just use "u32 insn".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>

arch_uprobe should be opaque as much as possible to the generic
code, but currently it assumes that insn/ixol must be u8[] of the
known size. Remove this unnecessary dependency, we can use "&" and
and sizeof() with the same effect.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

uprobe_task->vaddr is a bit strange. The generic code uses it only
to pass the additional argument to arch_uprobe_pre_xol(), and since
it is always equal to instruction_pointer() this looks even more
strange.

And both utask->vaddr and and utask->autask have the same scope,
they only have the meaning when the task executes the probed insn
out-of-line, so it is safe to reuse both in UTASK_RUNNING state.

This all means that logically ->vaddr belongs to arch_uprobe_task
and we should probably move it there, arch_uprobe_pre_xol() can
record instruction_pointer() itself.

OTOH, it is also used by uprobe_copy_process() and dup_xol_work()
for another purpose, this doesn't look clean and doesn't allow to
move this member into arch_uprobe_task.

This patch adds the union with 2 anonymous structs into uprobe_task.

The first struct is autask + vaddr, this way we "almost" move vaddr
into autask.

The second struct has 2 new members for uprobe_copy_process() paths:
->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work
which can be used to avoid kmalloc() and simplify the code.

Note that this union will likely have another member(s), we need
something like "private_data_for_handlers" so that the tracing
handlers could use it to communicate with call_fetch() methods.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  * Tag thread comm as overriden, showing the right comm for threads after forks.
    (Frederic Weisbecker)

  * Fix memory leak when processing perf.data file header. (Namhyung Kim.)

  * Don't try to free string constant used for anonymous event groups. (Namhyung Kim)

  * Fix use of multiple options in processing field in libtraceevent. (Steven Rostedt)

  * Fix conversion of pointer to integer of different size in libtraceevent.
    (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

gcc complaint on 32-bit system:

  /home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’:
  /home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

This is because the eval_num_arg returns everything as an 'unsigned long long',
so it converts a void pointer to a wider integer, fix it by converting the void
pointer to an integer of the same size, 'unsigned long', before casting it to
'unsigned long long'.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.

As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended.  (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Currently we only allocate a single cpu hashtable for per-cpu
swevents; do away with this optimization for it is fragile in the face
of things like perf_pmu_migrate_context().

The easiest thing is to make sure all CPUs are consistent wrt state.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Vince's perf-trinity fuzzer found yet another 'interesting' problem.

When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:

  ,-> <IPI>
  |     irq_work_exit() ->
  |       trace_irq_work_exit() ->
  |         ...
  |           __perf_event_overflow() -> (due to fasync)
  |             irq_work_queue() -> (irq_work_list must be empty)
  '---------      arch_irq_work_raise()

Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.

To avoid this, dis-allow sampling this particular tracepoint.

In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.

[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse
with:

  Error: expected type 5 but read 4
  Error: expected type 5 but read 4

The problem is with this part of the print_fmt:

  __print_symbolic(((REC->result) >> 24) & 0xff, ...

The __print_symbolic() helper function's first parameter is the field to
use to determine what symbol to print based on the value of the result.
The parser can handle one operation, but it can not handle multiple
operations ('>>' and '&').

Add code to process all operations for the field argument for
__print_symbolic() as well as __print_flags().
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.homeSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

After processing all group descriptors or encountering an error, it
frees all descriptors.  However, current logic can leak memory since it
might not traverse all descriptors.

Note that the 'i' can have different value than nr_groups when an error
occurred and it's safe to call free(desc[i].name) for every desc since
we already make it NULL when it's reused for group names.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When processing event group descriptor in perf file header, we reuse an
allocated group name but forgot to prevent it from freeing.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The problem is that when a thread overrides its default ":%pid" comm, we
forget to tag the thread comm as overriden. Hence, this overriden comm
is not inherited on future forks. Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomainSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Once we'd freed m->buf, m->count should become zero - we have no valid
contents reachable via m->buf.
Reported-by: Charley (Hao Chuan) Chu <charley.chu@broadcom.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull watchdog changes from Wim Van Sebroeck:
 - addition of MOXA ART watchdog driver (moxart_wdt)
 - addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver
   (sirfsoc_wdt)
 - addition of ralink watchdog driver (rt2880_wdt)
 - various fixes and cleanups (__user annotation, ioctl return codes,
   removal of redundant of_match_ptr, removal of unnecessary
   amba_set_drvdata(), use allocated buffer for usb_control_msg, ...)
 - removal of MODULE_ALIAS_MISCDEV statements
 - watchdog related DT bindings
 - first set of improvements on the w83627hf_wdt driver

* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
  watchdog: w83627hf: Use helper functions to access superio registers
  watchdog: w83627hf: Enable watchdog device only if not already enabled
  watchdog: w83627hf: Enable watchdog only once
  watchdog: w83627hf: Convert to watchdog infrastructure
  watchdog: omap_wdt: raw read and write endian fix
  watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE
  watchdog: pcwd_usb: overflow in usb_pcwd_send_command()
  watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe()
  watchdog: watchdog_core: Fix a trivial typo
  watchdog: dw: Enable OF support for DW watchdog timer
  watchdog: Get rid of MODULE_ALIAS_MISCDEV statements
  watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval
  watchdog: pcwd_usb: Use allocated buffer for usb_control_msg
  watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata()
  watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI
  watchdog: Remove redundant of_match_ptr
  watchdog: ts72xx_wdt: cleanup return codes in ioctl
  documentation/devicetree: Move DT bindings from gpio to watchdog
  watchdog: add ralink watchdog driver
  watchdog: Add MOXA ART watchdog driver
  ...

Pull i2c changes from Wolfram Sang:
 - new drivers for exynos5, bcm kona, and st micro
 - bigger overhauls for drivers mxs and rcar
 - typical driver bugfixes, cleanups, improvements
 - got rid of the superfluous 'driver' member in i2c_client struct This
   touches a few drivers in other subsystems.  All acked.

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()
  i2c: i2c-eg20t: do not print error message in syslog if no ACK received
  i2c: bcm-kona: Introduce Broadcom I2C Driver
  i2c: cbus-gpio: Fix device tree binding
  i2c: wmt: add missing clk_disable_unprepare() on error
  i2c: designware: add new ACPI IDs
  i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
  i2c: exynos5: Remove incorrect clk_disable_unprepare
  i2c: i2c-st: Add ST I2C controller
  i2c: exynos5: add High Speed I2C controller driver
  i2c: rcar: fixup rcar type naming
  i2c: scmi: remove some bogus NULL checks
  i2c: sh_mobile & rcar: Enable the driver on all ARM platforms
  i2c: sh_mobile: Convert to clk_prepare/unprepare
  i2c: mux: gpio: use reg value for i2c_add_mux_adapter
  i2c: mux: gpio: use gpio_set_value_cansleep()
  i2c: Include linux/of.h header
  i2c: mxs: Fix PIO mode on i.MX23
  i2c: mxs: Rework the PIO mode operation
  i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller
  ...

Pull infiniband/rdma updates from Roland Dreier:
 - Re-enable flow steering verbs with new improved userspace ABI
 - Fixes for slow connection due to GID lookup scalability
 - IPoIB fixes
 - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
 - Further improvements to SRP error handling
 - Add new transport type for Cisco usNIC

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
  IB/core: Re-enable create_flow/destroy_flow uverbs
  IB/core: extended command: an improved infrastructure for uverbs commands
  IB/core: Remove ib_uverbs_flow_spec structure from userspace
  IB/core: Use a common header for uverbs flow_specs
  IB/core: Make uverbs flow structure use names like verbs ones
  IB/core: Rename 'flow' structs to match other uverbs structs
  IB/core: clarify overflow/underflow checks on ib_create/destroy_flow
  IB/ucma: Convert use of typedef ctl_table to struct ctl_table
  IB/cm: Convert to using idr_alloc_cyclic()
  IB/mlx5: Fix page shift in create CQ for userspace
  IB/mlx4: Fix device max capabilities check
  IB/mlx5: Fix list_del of empty list
  IB/mlx5: Remove dead code
  IB/core: Encorce MR access rights rules on kernel consumers
  IB/mlx4: Fix endless loop in resize CQ
  RDMA/cma: Remove unused argument and minor dead code
  RDMA/ucma: Discard events for IDs not yet claimed by user space
  IB/core: Add Cisco usNIC rdma node and transport types
  RDMA/nes: Remove self-assignment from nes_query_qp()
  IB/srp: Report receive errors correctly
  ...

Pull battery updates from Anton Vorontsov:
 "Highlights:
   - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia.
   - Device tree bindings for TWL4030 chips.
   - Random fixes and cleanups"

* tag 'for-v3.13' of git://git.infradead.org/battery-2.6:
  pm2301-charger: Remove unneeded NULL checks
  twl4030_charger: Add devicetree support
  power_supply: Fix documentation for TEMP_*ALERT* properties
  max17042_battery: Support regmap to access device's registers
  max17042_battery: Use SIMPLE_DEV_PM_OPS
  charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code
  bq2415x_charger: Fix max battery regulation voltage
  tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code
  tps65090-charger: Drop devm_free_irq of devm_ allocated irq
  power_supply: Add support for bq24735 charger
  pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt
  pm2301-charger: Check return value of regulator_enable
  ab8500-charger: Remove redundant break
  ab8500-charger: Check return value of regulator_enable
  isp1704_charger: Fix driver to work with changes introduced in v3.5

Merge branch 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media build fixes from Mauro Carvalho Chehab:
 "A series of patches that fix compilation on non-x86 archs.

  While most of them are just build fixes, there are some fixes for real
  bugs, as there are a number of drivers using dynamic stack allocation.
  A few of those might be considered a security risk, if the i2c-dev
  module is loaded, as someone could be sending very long I2C data that
  could potentially overflow the Kernel stack.  Ok, as using /dev/i2c-*
  devnodes usually requires root on usual distros, and exploiting it
  would require a DVB board or USB stick, the risk is not high"

* 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (28 commits)
  [media] platform drivers: Fix build on frv arch
  [media] lirc_zilog: Don't use dynamic static allocation
  [media] mxl111sf: Don't use dynamic static allocation
  [media] af9035: Don't use dynamic static allocation
  [media] af9015: Don't use dynamic static allocation
  [media] dw2102: Don't use dynamic static allocation
  [media] dibusb-common: Don't use dynamic static allocation
  [media] cxusb: Don't use dynamic static allocation
  [media] v4l2-async: Don't use dynamic static allocation
  [media] cimax2: Don't use dynamic static allocation
  [media] tuner-xc2028: Don't use dynamic static allocation
  [media] tuners: Don't use dynamic static allocation
  [media] av7110_hw: Don't use dynamic static allocation
  [media] stv090x: Don't use dynamic static allocation
  [media] stv0367: Don't use dynamic static allocation
  [media] stb0899_drv: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] s5h1420: Don't use dynamic static allocation
  [media] uvc/lirc_serial: Fix some warnings on parisc arch
  ...

Pull media updates from Mauro Carvalho Chehab:
 "This series include:
   - a new Remote Controller driver for ST SoC with the corresponding DT
     bindings
   - a new frontend (cx24117)
   - a new I2C camera flash driver (lm3560)
   - a new mem2mem driver for TI SoC (ti-vpe)
   - support for Raphael r828d added to r820t driver
   - some improvements on buffer allocation at VB2 core
   - usual driver fixes and improvements

  PS this time, we have a smaller number of patches.  While it is hard
  to pinpoint to the reasons, I believe that it is mainly due to:

   1) there are several patch series ready, but depending on DT review.
      I decided to grant some extra time for DT maintainers to look on
      it, as they're expecting to have more time with the changes agreed
      during ARM mini-summit and KS.  If they can't review in time for
      3.14, I'll review myself and apply for the next merge window.

   2) I suspect that having both LinuxCon EU and LinuxCon NA happening
      during the same merge window affected the development
      productivity, as several core media developers participated on
      both events"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits)
  [media] media: st-rc: Add ST remote control driver
  [media] gpio-ir-recv: Include linux/of.h header
  [media] tvp7002: Include linux/of.h header
  [media] tvp514x: Include linux/of.h header
  [media] ths8200: Include linux/of.h header
  [media] adv7343: Include linux/of.h header
  [media] v4l: Fix typo in v4l2_subdev_get_try_crop()
  [media] media: i2c: add driver for dual LED Flash, lm3560
  [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
  [media] rtl28xxu: add RTL2832P + R828D support
  [media] rtl2832: add new tuner R828D
  [media] r820t: add support for R828D
  [media] media/i2c: ths8200: fix build failure with gcc 4.5.4
  [media] Add support for KWorld UB435-Q V2
  [media] staging/media: fix msi3101 build errors
  [media] ddbridge: Remove casting the return value which is a void pointer
  [media] ngene: Remove casting the return value which is a void pointer
  [media] dm1105: remove unneeded not-null test
  [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED
  [media] media: rcar_vin: Add preliminary r8a7790 support
  ...

Pull EDAC driver updates from Mauro Carvalho Chehab:
 - sb_edac: add support for Ivy Bridge support
 - cell_edac: add a missing of_node_put() call

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  cell_edac: fix missing of_node_put
  sb_edac: add support for Ivy Bridge
  sb_edac: avoid decoding the same error multiple times
  sb_edac: rename mci_bind_devs()
  sb_edac: enable multiple PCI id tables to be used
  sb_edac: rework sad_pkg
  sb_edac: allow different interleave lists
  sb_edac: allow different dram_rule arrays
  sb_edac: isolate TOHM retrieval
  sb_edac: rename pci_br
  sb_edac: isolate TOLM retrieval
  sb_edac: make RANK_CFG_A value part of sbridge_info

Pull EDAC updates from Borislav Petkov:
 "Following up on last week's discussion, here's my part of the EDAC
  pile, highlights in the signed tag.

  The last two patches have a date from just now because I've just
  applied them to the tree after Johannes sent them to me earlier.  I
  decided to forward them now because they're trivial.

  There's a third one for MPC85xx which adds PCIe error interrupt
  support but since it is not so trivial and hasn't seen any linux-next
  time, I'm deferring it to 3.14

  EDAC update highlights:
   - Support for Calxeda ECX-2000 memory controller, from Robert Richter
   - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob
     Herring and Robert Richter
   - New maintainer for Freescale's MPC85xx EDAC driver: Johannes
     Thumshirn"

* tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac/85xx: Remove mpc85xx_pci_err_remove
  EDAC: Add edac-mpc85xx driver to MAINTAINERS
  edac, highbank: Moving error injection to sysfs for edac
  edac, highbank: Add MAINTAINERS entry
  edac: Unify reporting of device info for device, mc and pci
  edac, highbank: Improve and unify naming
  edac, highbank: Add Calxeda ECX-2000 support
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
  edac, highbank: Fix interrupt setup of mem and l2 controller

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.13:

  Core:
   - Improve runtime PM support, remove mmc_{suspend,resume}_host().
   - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're
     outside of the resume sequence (in runtime_resume) to decrease
     system resume time.

  Drivers:
   - dw_mmc: Support HS200 mode.
   - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6.
   - sdhci-pci: Add support for Intel Clovertrail and Merrifield"

* tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits)
  mmc: wbsd: Silence compiler warning
  mmc: core: Silence compiler warning in __mmc_switch
  mmc: sh_mmcif: Convert to clk_prepare|unprepare
  mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops
  mmc: dw_mmc: exynos: Revert the sdr_timing assignment
  mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq
  mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume
  mmc: core: Improve runtime PM support during suspend/resume for sd/mmc
  mmc: core: Remove redundant mmc_power_up|off at runtime callbacks
  mmc: Don't force card to active state when entering suspend/shutdown
  MIPS: db1235: Don't use MMC_CLKGATE
  mmc: core: Remove deprecated mmc_suspend|resume_host APIs
  mmc: mmci: Move away from using deprecated APIs
  mmc: via-sdmmc: Move away from using deprecated APIs
  mmc: tmio: Move away from using deprecated APIs
  mmc: sh_mmcif: Move away from using deprecated APIs
  mmc: sdricoh_cs: Move away from using deprecated APIs
  mmc: rtsx: Remove redundant suspend and resume callbacks
  mmc: wbsd: Move away from using deprecated APIs
  mmc: pxamci: Remove redundant suspend and resume callbacks
  ...

Use helper functions named similar to other drivers to access
superio registers.

Request memory region only when needed, and use request_muxed_region().
This lets other devices (hwmon, gpio) use the same region.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

There is no need to enable the watchdog device if it is already enabled.
Also, when enabling the watchdog device, only set the watchdog device
enable bit and do not touch other bits; depending on the chip type,
those bits may enable other functionality.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

It is unnecessary to enable the logical device and WDT0 each time
the watchdog is accessed. Do it only once during initialization.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Fix to return a negative error code from the bus speed parse
error handling case instead of 0.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

This reverts commit 69f0554e.

This patch breaks randconfig on at least the x86-64 architecture, and
most likely on others.  There is work underway to support uncompressed
kernels in a generic way, but it looks like it will amount to
rewriting the support from scratch; see the LKML thread in the Link:
for info.

Therefore, revert this change and wait for the fix.
Reported-by: Pavel Roskin <proski@gnu.org>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131113113418.167b8ffd@IRBT4585Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove mpc85xx_pci_err_remove(...) which is obsolete, this removes the
compiler warning which can be seen when building the driver either
statically or as a module.
Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com>
Link: https://lkml.kernel.org/r/20131112161901.GA15637@jtlinuxSigned-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Borislav Petkov <bp@suse.de>

Add drivers/edac/mpc85xx_edac.[ch] to MAINTAINERS file and me as
maintainer.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Link: https://lkml.kernel.org/r/20131112161901.GA15637@jtlinux
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Dave Jiang <dave.jiang@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

As CSR SiRF is converted to multi platform CLOCK_TICK_RATE is a dummy
value that seems to match the right value is used.
(arch/arm/mach-prima2/include/mach/timex.h which defined CLOCK_TICK_RATE
to 1000000 was removed in commit cf82e0e4 (ARM: sirf: enable
multiplatform support); marco used the same file.)

To not depend on that dummy value use a local #define instead.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

We changed "buf" from being an array of 6 chars to being a pointer this
sizeof(buf) needs to be updated as well.

Fixes: 2ddb8089a7e5 ('watchdog: pcwd_usb: Use allocated buffer for usb_control_msg')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>