Merge tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-07

The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.

The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.

The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.

* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
====================

Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.

U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.

It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.

Fixes: d4ebf12b ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts
Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: be81992f ("xen/netback: don't queue unlimited number of packages")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20221205141333.3974565-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'ieee802154-for-net-2022-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2022-12-05

An update from ieee802154 for your *net* tree:

Three small fixes this time around.

Ziyang Xuan fixed an error code for a timeout during initialization of the
cc2520 driver.
Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due
uninitialized SPI structures.
Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential
null pointer dereference.
====================

Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The cmd_buff needs to be freed when error happened in
dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().

Fixes: 1110318d ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221205061515.115012-1-yuancan@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The greth_init_rings() function won't free the newly allocated skb when
dma_mapping_error() returns error, so add dev_kfree_skb() to fix it.

Compile tested only.

Fixes: d4c41139 ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When sending packets between nodes in netns, it calls tipc_lxc_xmit() for
peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv()
might be called, and it's pretty much like in tipc_rcv().

Currently the local 'node rw lock' is held during calling tipc_lxc_xmit()
to protect the peer_net not being freed by another thread. However, when
receiving these packets, tipc_node_add_conn() might be called where the
peer 'node rw lock' is acquired. Then a dead lock warning is triggered by
lockdep detector, although it is not a real dead lock:

    WARNING: possible recursive locking detected
    --------------------------------------------
    conn_server/1086 is trying to acquire lock:
    ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \
                     at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]

    but task is already holding lock:
    ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
                     at: tipc_node_xmit+0x285/0xb30 [tipc]

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(&n->lock#2);
      lock(&n->lock#2);

     *** DEADLOCK ***

     May be due to missing lock nesting notation

    4 locks held by conn_server/1086:
     #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \
                          at: tipc_accept+0x9c0/0x10b0 [tipc]
     #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \
                          at: tipc_accept+0x363/0x10b0 [tipc]
     #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
                          at: tipc_node_xmit+0x285/0xb30 [tipc]
     #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \
                          at: tipc_sk_rcv+0x2da/0x1b40 [tipc]

    Call Trace:
     <TASK>
     dump_stack_lvl+0x44/0x5b
     __lock_acquire.cold.77+0x1f2/0x3d7
     lock_acquire+0x1d2/0x610
     _raw_write_lock_bh+0x38/0x80
     tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
     tipc_sk_finish_conn+0x21e/0x640 [tipc]
     tipc_sk_filter_rcv+0x147b/0x3030 [tipc]
     tipc_sk_rcv+0xbb4/0x1b40 [tipc]
     tipc_lxc_xmit+0x225/0x26b [tipc]
     tipc_node_xmit.cold.82+0x4a/0x102 [tipc]
     __tipc_sendstream+0x879/0xff0 [tipc]
     tipc_accept+0x966/0x10b0 [tipc]
     do_accept+0x37d/0x590

This patch avoids this warning by not holding the 'node rw lock' before
calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock()
should be enough, as in cleanup_net() when freeing the netns, it calls
synchronize_rcu() before the free is continued.

Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes
sense to call it under rcu_read_lock(). Note that the right lock order
must be:

   rcu_read_lock();
   tipc_node_read_lock(n);
   tipc_node_read_unlock(n);
   tipc_lxc_xmit();
   rcu_read_unlock();

instead of:

   tipc_node_read_lock(n);
   rcu_read_lock();
   tipc_node_read_unlock(n);
   tipc_lxc_xmit();
   rcu_read_unlock();

and we have to call tipc_node_read_lock/unlock() twice in
tipc_node_xmit().

Fixes: f73b1281 ("tipc: improve throughput between nodes in netns")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0). So
when handling the "Back to Error Active"-event force txerr = rxerr =
0, otherwise the berr-counters might stay on values like 95 forever.

Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Additionally, remove it from .ndo_stop().

This ensures that the worker is not called after being freed, and that
the UART TX queue remains active to send final commands when the
netdev is stopped.

Thanks to Jiri Slaby for finding this in slcan:

  https://lore.kernel.org/linux-can/20221201073426.17328-1-jirislaby@kernel.org/

A variant of this patch for slcan, with the flush in .ndo_stop() still
present, has been tested successfully on physical hardware:

  https://bugzilla.suse.com/show_bug.cgi?id=1205597

Fixes: 43da2f07 ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters")
Cc: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221202160148.282564-1-max@enpas.org
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The LTP test pty03 is causing a crash in slcan:
  BUG: kernel NULL pointer dereference, address: 0000000000000008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
  Workqueue:  0x0 (events)
  RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185)
  Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e
  RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968
  RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0
  RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734
  R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000
  R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0
  FS:  0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0
  Call Trace:
   <TASK>
  worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436)
  kthread (/home/rich/kernel/linux/kernel/kthread.c:376)
  ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312)

Apparently, the slcan's tx_work is freed while being scheduled. While
slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work),
slcan_close() (tty side) does not. So when the netdev is never set UP,
but the tty is stuffed with bytes and forced to wakeup write, the work
is scheduled, but never flushed.

So add an additional flush_work() to slcan_close() to be sure the work
is flushed under all circumstances.

The Fixes commit below moved flush_work() from slcan_close() to
slcan_netdev_close(). What was the rationale behind it? Maybe we can
drop the one in slcan_netdev_close()?

I see the same pattern in can327. So it perhaps needs the very same fix.

Fixes: cfcb4465 ("can: slcan: remove legacy infrastructure")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205597Reported-by: Richard Palethorpe <richard.palethorpe@suse.com>
Tested-by: Petr Vorel <petr.vorel@suse.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221201073426.17328-1-jirislaby@kernel.orgSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Analogue to commit 8aa59e35 ("can: af_can: fix NULL pointer
dereference in can_rx_register()") we need to check for a missing
initialization of ml_priv in the receive path of CAN frames.

Since commit 4e096a18 ("net: introduce CAN specific pointer in the
struct net_device") the check for dev->type to be ARPHRD_CAN is not
sufficient anymore since bonding or tun netdevices claim to be CAN
devices but do not initialize ml_priv accordingly.

Fixes: 4e096a18 ("net: introduce CAN specific pointer in the struct net_device")
Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-12-05 (i40e)

Michal clears XPS init flag on reset to allow for updated values to be
written.

Sylwester adds sleep to VF reset to resolve issue of VFs not getting
resources.

Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they
 are not supported.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Disallow ip4 and ip6 l4_4_bytes
  i40e: Fix for VF MAC address 0
  i40e: Fix not setting default xps_cpus after reset
====================

Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(),
priv->regions is not released.

Fixes: bf425b82 ("net: dsa: sja1105: expose static config as devlink region")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205012132.2110979-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
ipv4: Two small fixes for bugs in IPv4 routing code.

A variation of the second bug was reported by an FRR 5.0 (released
06/18) user as this version was setting a table ID of 0 for the
default VRF, unlike iproute2 and newer FRR versions.

The first bug was discovered while fixing the second.

Both bugs are not regressions (never worked) and are not critical
in my opinion, so the fixes can be applied to net-next, if desired.

No regressions in other tests:

 # ./fib_tests.sh
 ...
 Tests passed: 191
 Tests failed:   0
====================

Link: https://lore.kernel.org/r/20221204075045.3780097-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.

Consider the following example:

 # ip address add dev dummy1 192.0.2.1/28
 # ip address add dev dummy1 192.0.2.17/28
 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:

 # ip address del dev dummy1 192.0.2.17/28
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.

Add a test case that fails before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [FAIL]

 Tests passed:   8
 Tests failed:   1

And passes after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [ OK ]

 Tests passed:   9
 Tests failed:   0

Fixes: 5a56a0b3 ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.

Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().

Add test cases that fail before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [FAIL]
     TEST: Route in default VRF not removed                              [ OK ]
 RTNETLINK answers: File exists
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [FAIL]

 Tests passed:   6
 Tests failed:   2

And pass after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]

 Tests passed:   8
 Tests failed:   0

Fixes: 5a56a0b3 ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.

Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.

Fixes: df727d45 (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 4d633d1b ("bonding: fix ICMPv6 header handling when receiving
IPv6 messages"), there is a copy/paste issue for NA daddr. I found that
in my testing and fixed it in my local branch. But I forgot to re-format
the patch and sent the wrong mail.

Fix it by reading the correct dest address.

Fixes: 4d633d1b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the potential risk of OOB if skb_linearize() fails in
tipc_link_proto_rcv().

Fixes: 5cbb28a4 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There is warning report about of_node refcount leak
while probing mdio device:

OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4

In of_mdiobus_register_device(), we increase fwnode refcount
by fwnode_handle_get() before associating the of_node with
mdio device, but it has never been decreased in normal path.
Since that, in mdio_device_release(), it needs to call
fwnode_handle_put() in addition instead of calling kfree()
directly.

After above, just calling mdio_device_free() in the error handle
path of of_mdiobus_register_device() is enough to keep the
refcount balanced.

Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 542ae60a ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The nicvf_probe() won't destroy workqueue when register_netdev()
failed. Add destroy_workqueue err handle case to fix this issue.

Fixes: 2ecbe4f4 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The skb is delivered to napi_gro_receive() which may free it, after calling this,
dereferencing skb may trigger use-after-free.

Fixes: 1c59eb67 ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()

Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.

IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux
is not released.

Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20221203020903.383235-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be
cleared, and another CPU can start napi thread and access per-CQ variable,
cq->work_done. If the other thread (for example, from busy_poll) sets
it to a value >= budget, this thread will continue to run when it should
stop, and cause memory corruption and panic.

To fix this issue, save the per-CQ work_done variable in a local variable
before napi_complete_done(), so it won't be corrupted by a possible
concurrent thread after napi_complete_done().

Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done
variable race is fixed, so the driver is able to reliably support features
like busy_poll.

Cc: stable@vger.kernel.org
Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1670010190-28595-1-git-send-email-haiyangz@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config"
node are named without "axi_" prefix, but the driver expects the
prefix. Since the dt-binding has been there for a long time, we'd
better make driver match the binding for compatibility.

Fixes: afea0365 ("stmmac: rework DMA bus setting and introduce new platform AXI structure")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:

  memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)

This appears to be a legitimate lack of bounds checking in
nci_add_new_protocol(). Add the missing checks.

Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com
Fixes: 019c4fba ("NFC: Add NCI multiple targets support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or
IP6 flow director filters. Flow director does not support filtering
on l4 bytes for PCTYPEs used by IP4 and IP6 filters.
Without this patch, user could create filters with l4_4_bytes fields,
which did not do any filtering on L4, but only on L3 fields.

Fixes: 36777d9f ("i40e: check current configured input set when adding ntuple filters")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Kamil Maziarz  <kamil.maziarz@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

After spawning max VFs on a PF, some VFs were not getting resources and
their MAC addresses were 0. This was caused by PF sleeping before flushing
HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for
VF.

Fix by adding a sleep after hw flush.

Fixes: e4b433f4 ("i40e: reset all VFs in parallel when rebuilding PF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

During tx rings configuration default XPS queue config is set and
__I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is
cleared and set again with default mapping only during queues build,
it means after first setup or reset with queues rebuild. (i.e.
ethtool -L <interface> combined <number>) After other resets (i.e.
ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default
maps cannot be set again. It results in cleared xps_cpus mapping
until queues are not rebuild or mapping is not set by user.

Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let
the driver set xps_cpus to defaults again after it was cleared.

Fixes: 6f853d4f ("i40e: allow XPS with QoS enabled")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The pp->indir[0] value comes from the user.  It is passed to:

	if (cpu_online(pp->rxq_def))

inside the mvneta_percpu_elect() function.  It needs bounds checkeding
to ensure that it is not beyond the end of the cpu bitmap.

Fixes: cad5d847 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A NAPI is setup for each network sring to poll data to kernel
The sring with source host is destroyed before live migration and
new sring with target host is setup after live migration.
The NAPI for the old sring is not deleted until setup new sring
with target host after migration. With busy_poll/busy_read enabled,
the NAPI can be polled before got deleted when resume VM.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: xennet_poll+0xae/0xd20
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Call Trace:
 finish_task_switch+0x71/0x230
 timerqueue_del+0x1d/0x40
 hrtimer_try_to_cancel+0xb5/0x110
 xennet_alloc_rx_buffers+0x2a0/0x2a0
 napi_busy_loop+0xdb/0x270
 sock_poll+0x87/0x90
 do_sys_poll+0x26f/0x580
 tracing_map_insert+0x1d4/0x2f0
 event_hist_trigger+0x14a/0x260

 finish_task_switch+0x71/0x230
 __schedule+0x256/0x890
 recalc_sigpending+0x1b/0x50
 xen_sched_clock+0x15/0x20
 __rb_reserve_next+0x12d/0x140
 ring_buffer_lock_reserve+0x123/0x3d0
 event_triggers_call+0x87/0xb0
 trace_event_buffer_commit+0x1c4/0x210
 xen_clocksource_get_cycles+0x15/0x20
 ktime_get_ts64+0x51/0xf0
 SyS_ppoll+0x160/0x1a0
 SyS_ppoll+0x160/0x1a0
 do_syscall_64+0x73/0x130
 entry_SYSCALL_64_after_hwframe+0x41/0xa6
...
RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900
CR2: 0000000000000008
---[ end trace f8601785b354351c ]---

xen frontend should remove the NAPIs for the old srings before live
migration as the bond srings are destroyed

There is a tiny window between the srings are set to NULL and
the NAPIs are disabled, It is safe as the NAPI threads are still
frozen at that time
Signed-off-by: Lin Liu <lin.liu@citrix.com>
Fixes: 4ec24119 ([NET]: Do not check netif_running() and carrier state in ->poll())
Signed-off-by: David S. Miller <davem@davemloft.net>

consume_skb on transmitted, kfree_skb on dropped, do not free on
TX_BUSY.

Previously the xmit function could return -EBUSY without freeing, which
supposedly is interpreted as a drop. And was using kfree on successfully
transmitted packets.

sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY
indicates TX_BUSY and any other error code indicates dropped.

Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In otx2_init_tc(), if rhashtable_init() failed, it does not free
tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap().

Fixes: 2e2a8126 ("octeontx2-pf: Unify flow management variables")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If phy_device_register() or fwnode_mdiobus_phy_device_register()
fail, phy_device_free() is called, the device refcount is decreased
to 0, then fwnode_handle_put() will be called in phy_device_release(),
but in the error path, fwnode_handle_put() has already been called,
so set fwnode to NULL after fwnode_handle_put() in the error path to
avoid double put.

Fixes: cdde1560 ("net: mdiobus: fix unbalanced node reference count")
Reported-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A loop for reading MISTAT register continues while regmap_read() fails
and (mistat & BUSY), but if regmap_read() fails a value of mistat is
undefined.

The patch proposes to check for BUSY flag only when regmap_read()
succeed. Compile test only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e5326 ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In functions regmap_encx24j600_phy_reg_read() and
regmap_encx24j600_phy_reg_write() in the conditions of the waiting
cycles for filling the variable 'ret' it is necessary to add parentheses
to prevent wrong assignment due to logical operations precedence.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e5326 ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>