Skip to content

L
linux
Switch branch/tag
  1. 12 Aug, 2015 11 commits
    • Martin Schwidefsky's avatar
      s390/sclp: clear upper register halves in _sclp_print_early · 65f9f71d
      Martin Schwidefsky authored 
      commit f9c87a6f upstream.

If the kernel is compiled with gcc 5.1 and the XZ compression option
the decompress_kernel function calls _sclp_print_early in 64-bit mode
while the content of the upper register half of %r6 is non-zero.
This causes a specification exception on the servc instruction in
_sclp_servc.

The _sclp_print_early function saves and restores the upper registers
halves but it fails to clear them for the 31-bit code of the mini sclp
driver.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      65f9f71d
    • Al Viro's avatar
      freeing unlinked file indefinitely delayed · e2f9d514
      Al Viro authored 
      commit 75a6f82a upstream.

	Normally opening a file, unlinking it and then closing will have
the inode freed upon close() (provided that it's not otherwise busy and
has no remaining links, of course).  However, there's one case where that
does *not* happen.  Namely, if you open it by fhandle with cold dcache,
then unlink() and close().

	In normal case you get d_delete() in unlink(2) notice that dentry
is busy and unhash it; on the final dput() it will be forcibly evicted from
dcache, triggering iput() and inode removal.  In this case, though, we end
up with *two* dentries - disconnected (created by open-by-fhandle) and
regular one (used by unlink()).  The latter will have its reference to inode
dropped just fine, but the former will not - it's considered hashed (it
is on the ->s_anon list), so it will stay around until the memory pressure
will finally do it in.  As the result, we have the final iput() delayed
indefinitely.  It's trivial to reproduce -

void flush_dcache(void)
{
        system("mount -o remount,rw /");
}

static char buf[20 * 1024 * 1024];

main()
{
        int fd;
        union {
                struct file_handle f;
                char buf[MAX_HANDLE_SZ];
        } x;
        int m;

        x.f.handle_bytes = sizeof(x);
        chdir("/root");
        mkdir("foo", 0700);
        fd = open("foo/bar", O_CREAT | O_RDWR, 0600);
        close(fd);
        name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0);
        flush_dcache();
        fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR);
        unlink("foo/bar");
        write(fd, buf, sizeof(buf));
        system("df .");			/* 20Mb eaten */
        close(fd);
        system("df .");			/* should've freed those 20Mb */
        flush_dcache();
        system("df .");			/* should be the same as #2 */
}

will spit out something like
Filesystem     1K-blocks   Used Available Use% Mounted on
/dev/root         322023 303843      1131 100% /
Filesystem     1K-blocks   Used Available Use% Mounted on
/dev/root         322023 303843      1131 100% /
Filesystem     1K-blocks   Used Available Use% Mounted on
/dev/root         322023 283282     21692  93% /
- inode gets freed only when dentry is finally evicted (here we trigger
than by remount; normally it would've happened in response to memory
pressure hell knows when).
Acked-by: default avatarJ. Bruce Fields <bfields@fieldses.org>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
[ kamal: backport to 3.19-stable: no fast_dput() ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      e2f9d514
    • Jingju Hou's avatar
      mmc: sdhci-pxav3: fix platform_data is not initialized · 858f7ef5
      Jingju Hou authored 
      commit 9cd76049 upstream.

pdev->dev.platform_data is not initialized if match is true in function
sdhci_pxav3_probe. Just local variable pdata is assigned the return value
from function pxav3_get_mmc_pdata().

static int sdhci_pxav3_probe(struct platform_device *pdev) {

    struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
    ...
    if (match) {
		ret = mmc_of_parse(host->mmc);
		if (ret)
			goto err_of_parse;
		sdhci_get_of_property(pdev);
		pdata = pxav3_get_mmc_pdata(dev);
     }
     ...
}
Signed-off-by: default avatarJingju Hou <houjingj@marvell.com>
Fixes: b650352d("mmc: sdhci-pxa: Add device tree support")
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      858f7ef5
    • Joakim Tjernlund's avatar
      mmc: sdhci-esdhc: Make 8BIT bus work · a2f985af
      Joakim Tjernlund authored 
      commit 8e91125f upstream.

Support for 8BIT bus with was added some time ago to sdhci-esdhc but
then missed to remove the 8BIT from the reserved bit mask which made
8BIT non functional.

Fixes: 66b50a00 ("mmc: esdhc: Add support for 8-bit bus width and..")
Signed-off-by: default avatarJoakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a2f985af
    • Tomas Winkler's avatar
      mmc: block: Add missing mmc_blk_put() in power_ro_lock_show() · 1f7d2349
      Tomas Winkler authored 
      commit 9098f84c upstream.

Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler,
let's add it.

Fixes: add710ea ("mmc: boot partition ro lock support")
Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1f7d2349
    • Edward Hyunkoo Jee's avatar
      inet: frags: fix defragmented packet's IP header for af_packet · f65e2502
      Edward Hyunkoo Jee authored 
      commit 0848f642 upstream.

When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.

However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.

Also, IPv4 checksum is not corrected after reassembly.

Fixes: 7736d33f ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: default avatarEdward Hyunkoo Jee <edjee@google.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f65e2502
    • Nikolay Aleksandrov's avatar
      bonding: correctly handle bonding type change on enslave failure · cda1c86b
      Nikolay Aleksandrov authored 
      commit 7d5cd2ce upstream.

If the bond is enslaving a device with different type it will be setup
by it, but if after being setup the enslave fails the bond doesn't
switch back its type and also keeps pointers to foreign structures that can
be long gone. Thus revert back any type changes if the enslave failed and
the bond had to change its type.
Example:
 Before patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
    link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff
(notice the MASTER flag is gone)

 After patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: e36b9d16 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      cda1c86b
    • Nikolay Aleksandrov's avatar
      bonding: fix destruction of bond with devices different from arphrd_ether · cc065253
      Nikolay Aleksandrov authored 
      commit 06f6d109 upstream.

When the bonding is being unloaded and the netdevice notifier is
unregistered it executes NETDEV_UNREGISTER for each device which should
remove the bond's proc entry but if the device enslaved is not of
ARPHRD_ETHER type and is in front of the bonding, it may execute
bond_release_and_destroy() first which would release the last slave and
destroy the bond device leaving the proc entry and thus we will get the
following error (with dynamic debug on for bond_netdev_event to see the
events order):
[  908.963051] eql: event: 9
[  908.963052] eql: IFF_SLAVE
[  908.963054] eql: event: 2
[  908.963056] eql: IFF_SLAVE
[  908.963058] eql: event: 6
[  908.963059] eql: IFF_SLAVE
[  908.963110] bond0: Releasing active interface eql
[  908.976168] bond0: Destroying bond bond0
[  908.976266] bond0 (unregistering): Released all slaves
[  908.984097] ------------[ cut here ]------------
[  908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575
remove_proc_entry+0x112/0x160()
[  908.984110] remove_proc_entry: removing non-empty directory
'net/bonding', leaking at least 'bond0'
[  908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper
snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw
gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec
psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev
drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core
pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button
autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom
ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci
virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore
usb_common [last unloaded: bonding]

[  908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G        W  O
4.2.0-rc2+ #8
[  908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  908.984172]  0000000000000000 ffffffff81732d41 ffffffff81525b34
ffff8800358dfda8
[  908.984175]  ffffffff8106c521 ffff88003595af78 ffff88003595af40
ffff88003e3a4280
[  908.984178]  ffffffffa058d040 0000000000000000 ffffffff8106c59a
ffffffff8172ebd0
[  908.984181] Call Trace:
[  908.984188]  [<ffffffff81525b34>] ? dump_stack+0x40/0x50
[  908.984193]  [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0
[  908.984196]  [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50
[  908.984199]  [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160
[  908.984205]  [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30
[bonding]
[  908.984208]  [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding]
[  908.984217]  [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70
[  908.984225]  [<ffffffff8142f52d>] ?
unregister_pernet_operations+0x8d/0xd0
[  908.984228]  [<ffffffff8142f58d>] ?
unregister_pernet_subsys+0x1d/0x30
[  908.984232]  [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding]
[  908.984236]  [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250
[  908.984241]  [<ffffffff81086f99>] ? task_work_run+0x89/0xc0
[  908.984244]  [<ffffffff8152b732>] ?
entry_SYSCALL_64_fastpath+0x16/0x75
[  908.984247] ---[ end trace 7c006ed4abbef24b ]---

Thus remove the proc entry manually if bond_release_and_destroy() is
used. Because of the checks in bond_remove_proc_entry() it's not a
problem for a bond device to change namespaces (the bug fixed by the
Fixes commit) but since commit
f9399814 ("bonding: Don't allow bond devices to change network
namespaces.") that can't happen anyway.
Reported-by: default avatarCarol Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: a64d49c3 ("bonding: Manage /proc/net/bonding/ entries from
                      the netdev events")
Tested-by: default avatarCarol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      cc065253
    • Alexey Khoroshilov's avatar
      usb: gadget: mv_udc_core: fix phy_regs I/O memory leak · 1bd8a666
      Alexey Khoroshilov authored 
      commit 53e20f2e upstream.

There was an omission in transition to devm_xxx resource handling.
iounmap(udc->phy_regs) were removed, but ioremap() was left
without devm_.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: default avatarAlexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 3517c31a ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
[ luis: backported to 3.16:
  - file rename: drivers/usb/gadget/udc/mv_udc_core.c ->
    drivers/usb/gadget/mv_udc_core.c ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1bd8a666
    • Tilman Schmidt's avatar
      isdn/gigaset: reset tty->receive_room when attaching ser_gigaset · 39b01edc
      Tilman Schmidt authored 
      commit fd98e941 upstream.

Commit 79901317 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:

Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.

The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.

Fixes: 79901317 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: default avatarTilman Schmidt <tilman@imap.cc>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      39b01edc
    • Nikolay Aleksandrov's avatar
      bridge: mdb: fix double add notification · 230ecc15
      Nikolay Aleksandrov authored 
      commit 5ebc7846 upstream.

Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.

Example:
 Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
 Before patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

 After patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: cfd56754 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      230ecc15
  3. 11 Aug, 2015 29 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7