Add compatible string for pmm8155au pmic found on
the SA8155p-adp board.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-3-bhupesh.sharma@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Arrange the compatibles inside qcom-rpmh regulator device tree
bindings alphabetically.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-2-bhupesh.sharma@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

SA8155p-adp board supports a new regulator - pmm8155au.

The output power management circuits in this regulator include:
- FTS510 smps,
- HFS510 smps, and
- LDO510 linear regulators

Add support for the same.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-6-bhupesh.sharma@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add missing terminator(s) at the end of pm7325x_vreg_data[]
array instances.

Fixes: c4e5aa3d ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-5-bhupesh.sharma@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Cleanup the qcom-rpmh regulator driver to remove comma(s)
at the end of the terminator line(s).

Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-4-bhupesh.sharma@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of returning the the PTR_ERR directly, use dev_err_probe which
will also correctly set the deferred probe reason in
/sys/kernel/debug/deferred_devices, making it easier to debug missing
devices on the system.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20210616125331.153414-1-r.czerwinski@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

At the context with *rdev, use rdev_get_drvdata() is more intuitive.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-3-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

It's only used in this file and never changed, make it static const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The vsel active level is for the normal voltage, the opposite level is
the suspend voltage.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210616011816.3479406-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

devm_regmap_init_spmi_ext() returns ERR_PTR() on error.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210615132934.3453965-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Initial support for the Silergy SY7636A-regulator Power Management chip.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210615103400.946-3-alistair@alistair23.meSigned-off-by: Mark Brown <broonie@kernel.org>

Use a local variable instead is enough, this simplifies the code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210615103947.3387994-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

All the voltage tables have entries in ascendant order, so use
regulator_map_voltage_ascend to speed up the mapping.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210610134128.2477821-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove dummy line and add module description.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1623335910-5385-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210603093809.1108629-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'for-5.14-regulator' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into regulator-5.14

regulator: Changes for v5.14-rc1

This adds regulator_sync_voltage_rdev(), which is used as a dependency
for new Tegra power domain code.

According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.

So vsel_mask for FAN53880_BUCK should be 0xFF.

Fixes: e6dea51e ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.

Thus the struct bd71815_pmic can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210607143002.1600017-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use regulator_set_ramp_delay_regmap instead of open-coded

LTC3589_LINEAR_REG() no longer call LTC3589_REG() now.
Only LTC3589_LINEAR_REG() needs to set go_bit, thus remove go_bit
parameter from LTC3589_REG() macro.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210604115803.1260976-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The MT6359_BUCK and MT6359_LDO_LINEAR macros setup both
linear settings (min_uV, uV_step, linear_min_sel) and linar_range
(linear_ranges, n_linear_ranges) settings.
All the linear range tables actually only has one entry.
Let's simplify it by using linear instead of linear range.

The linear_min_sel setting is 0 for all cases, remove it
from the macros.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-3-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210605013424.1298773-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'tb-mfd-regulator-rtc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into regulator-5.14

Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window

For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526

without this patch, the dmesg output is:
  fan53555-regulator 0-0010: Chip ID 0 not supported!
  fan53555-regulator 0-0010: Failed to setup device!
  fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
  vdd_gpu: supplied by vcc5v0_sys

The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526

This has been tested with a Radxa Rock Pi N10.
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://lore.kernel.org/r/20210602112943.GA119@5f9be87369f8Signed-off-by: Mark Brown <broonie@kernel.org>

Richtek RT6245 is a high-performance, synchronous step-down converter
that can deliver up to 14A output current with an input supply voltage
range of 4.5V to 17V.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622699844-19203-2-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the binding document for Richtek RT6245.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622699844-19203-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Also use unsigned int instead of int for the voltage tables.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525100405.2506483-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525124017.2550029-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The di->slew_reg/di->slew_mask/di->slew_shift was not set in current code,
fix it.

Fixes: f2a9eb97 ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525124017.2550029-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210523072320.2174443-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

max77802_set_ramp_delay_2bit() returns -EINVAL when id > MAX77802_BUCK4.
This was a leftover in commit b0615f1d
("regulator: max77802: Split regulator operations for BUCKs").
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210523072320.2174443-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_RO/RW macro helper instead of plain DEVICE_ATTR, which
makes the code a bit shorter and easier to read.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210602080526.11117-1-thunder.leizhen@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for Richtek RT6160 voltage regulator. It can provide up
to 3A output current within the adjustable voltage from 2025mV
to 5200mV. It integrate a buckboost converter to support wide input
voltage range from 2200mV to 5500mV.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622611906-2403-2-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add DT binding document for Richtek RT6160 voltage regulator.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622611906-2403-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210529115226.25376-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The MT6359P is a eco version for MT6359 regulator.
We add support based on MT6359 regulator driver.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The MT6359 is a regulator found on boards based on MediaTek MT6779 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Wen Su <wen.su@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This adds support for the MediaTek MT6359 PMIC. This is a
multifunction device with the following sub modules:

- Codec
- Interrupt
- Regulator
- RTC

It is interfaced to the host controller using SPI interface
by a proprietary hardware called PMIC wrapper or pwrap.
MT6359 MFD is a child device of the pwrap.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>