Merge tag 'optee-ffa-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers

Fix spell errors in OP-TEE FF-A driver log messages

* tag 'optee-ffa-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: Fix spelling mistake "reclain" -> "reclaim"

Link: https://lore.kernel.org/r/20211028185142.GA2489375@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

There are spelling mistakes in pr_err error messages. Fix them.

Fixes: 4615e5a3 ("optee: add FF-A support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: added a fixes]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

This reverts commits 55845f46 and c50031f0, since this still
causes a build failure when QCOM_SCM is a loadable module, or when
CONFIG_SMP is disabled:

ERROR: modpost: "cpu_logical_map" [drivers/firmware/qcom-scm.ko] undefined!

This be done better for 5.17, but it's too late now to rework
properly.

Fixes: c50031f0 ("firmware: qcom: scm: Don't break compile test on non-ARM platforms")
Fixes: 55845f46 ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on
other architectures, but this causes a Kconfig warning
for QCOM_SPM:

WARNING: unmet direct dependencies detected for QCOM_SPM
  Depends on [n]: ARCH_QCOM [=n]
  Selected by [y]:
  - ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]

Make it possible to also compile-test this one, which can
be done now that v5.15-rc5 lets you select QCOM_SCM everywhere.

Fixes: a871be6b ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Fixes: 498ba2a8 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-ffa-updates-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

Arm FF-A updates for v5.16

Just couple of minor updates:
- Adding support for MEMORY_LEND API
- Handling compatibility with different firmware versions(especially
  dealing with newer/higher versions than the one supported by the driver)

* tag 'arm-ffa-updates-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Remove unused 'compat_version' variable
  firmware: arm_ffa: Add support for MEM_LEND
  firmware: arm_ffa: Handle compatibility with different firmware versions
  firmware: arm_ffa: Fix __ffa_devices_unregister
  firmware: arm_ffa: Add missing remove callback to ffa_bus_type

Link: https://lore.kernel.org/r/20211026141535.1920602-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

More Qualcomm driver updates for v5.16

This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.

The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.

The socinfo driver learns about a few new PMICs.

SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.

Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop

* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: qcom: smp2p: add feature negotiation and ssr ack feature support
  soc: qcom: Add Sleep stats driver
  dt-bindings: Introduce QCOM Sleep stats bindings
  soc: qcom: socinfo: add two missing PMIC IDs
  soc: qcom: rpmhpd: Make power_on actually enable the domain
  soc: qcom: smem: Support reserved-memory description
  dt-bindings: soc: smem: Make indirection optional
  dt-bindings: sram: Document qcom,rpm-msg-ram

Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers

Samsung SoC drivers changes for v5.16

1. Convert Exynos ChipID and ASV driver to a module and make it a
   default, instead of selected. The driver is not essential, so it
   could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
   driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
   instead of direct dependencies.
4. Minor cleanups.

* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
  soc: samsung: exynos-chipid: Add Exynos850 support
  dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
  soc: samsung: exynos-chipid: Pass revision reg offsets
  soc: samsung: pm_domains: drop unused is_off field
  arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
  soc: samsung: exynos-chipid: do not enforce built-in
  soc: samsung: exynos-chipid: convert to a module
  soc: samsung: exynos-chipid: avoid soc_device_to_device()
  soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE

Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The newly added ffa_compatible_version_find() function causes a
build warning because of a variable that is never used:

drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable]
        u32 compat_version;

Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org
Fixes: 8e3f9da6 ("firmware: arm_ffa: Handle compatibility with different firmware versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The product id of Exynos Auto v9 is "0xAAA8_0000". Add this id and its
name.

Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-2-chanho61.park@samsung.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

The introduction of __qcom_scm_set_boot_addr_mc() relies on
cpu_logical_map() and MPIDR_AFFINITY_LEVEL() from smp_plat.h, but only
ARM and ARM64 has this include file, so the introduction of this
dependency broke compile testing on e.g. x86_64.

Make the inclusion of smp_plat.h and the affected function depend on
ARM || ARM64 to allow the code to still be compiled.

Fixes: 55845f46 ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025025816.2937465-1-bjorn.andersson@linaro.org

Fix following coccicheck warning:
./drivers/soc/qcom/smp2p.c:501:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto

Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014062350.8942-1-wanjiabing@vivo.com

Fix following coccicheck warning:

./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return

Early exits from for_each_child_of_node should decrement the
node reference counter.

Fixes: 83473566 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com

Client votes starts at 0x20 offset. Correct the offset.
Reported-and-suggested-by: Shawn Guo <shawn.guo@linaro.org>
Fixes: 1d772469 ("soc: qcom: Add Sleep stats driver")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634719753-26064-1-git-send-email-mkshah@codeaurora.org

The sm8350_mxc's domain description incorrectly references
sm8150_mmcx_ao as a peer instead of sm8350_mxc_ao. Correct this typo.

Fixes: 639c8562 ("soc: qcom: rpmhpd: Add SM8350 power domains")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020012639.1183806-1-dmitry.baryshkov@linaro.org

Since MSM8916 is an ARM v8 64-bit SoC the CPU cores are normally booted
using "psci" or "spin-table". Unfortunately, some devices come with signed
32-bit-only firmware without ARM64 and PSCI support. This setup is easy to
support since it's very similar to older 32-bit only Qualcomm SoCs
(e.g. MSM8226) and only requires adding a few new definitions to already
existing drivers.

Document the qcom,msm8916-smp enable-method. It is actually just an alias
of qcom,msm8226-smp since it should be implemented identically.
The enable-method is only valid on ARM32 and must not be used on ARM64.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-8-stephan@gerhold.net

Unfortunately, some MSM8916 devices have signed firmware without
ARM64 and PSCI support and can therefore only boot ARM32 Linux.
The ARM Cortex-A53 cores should be actually booted exactly like
the Cortex-A7 cores on MSM8226, so just add an alias for the
existing code.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-9-stephan@gerhold.net

It looks like the old QCOM_SCM_BOOT_SET_ADDR API is broken on some
MSM8916 firmware versions that implement the newer SMC32 calling
convention. It just returns -EINVAL no matter which arguments are
being passed.

This does not cause any problems downstream because it first tries
to use the new multi-cluster API replacement which is working fine.

Implement support for the multi-cluster variant of the SCM call
by attempting it first but still fallback to the old call in case
of an error. Also, to be absolutely sure only use the multi-cluster
variant with the SMC calling convention since older platforms should
not need this.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-12-stephan@gerhold.net

Add SPM register information and initialization values for QCOM 8916
SoC.

Link: https://lore.kernel.org/linux-arm-msm/1429314549-6730-5-git-send-email-lina.iyer@linaro.org/Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
[stephan: rebase patch and fix conflicts]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-11-stephan@gerhold.net

Document the qcom,msm8916-saw2-v3.0-cpu compatible that is needed
for cpuidle for MSM8916 on some devices with signed firmware which
is only capable of booting ARM32 kernels without PSCI.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-10-stephan@gerhold.net

Add PM8150C and SMB2351 to the list of known PMIC models.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211005024025.2037810-1-bjorn.andersson@linaro.org

Since __qcom_scm_is_call_available() returns bool, have it return false
instead of -EINVAL if an invalid SMC convention is detected.

This fixes the Smatch static checker warning:

	drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available()
	warn: signedness bug returning '(-22)'

Fixes: 9d11af8b ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633982414-28347-1-git-send-email-quic_gurus@quicinc.com

Add driver support for the UART routing control. Users can perform
runtime configuration of the RX muxes among the UART controllers and
the UART IO pins.

The sysfs interface is also exported for the convenience of routing paths
check and update.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com
Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'soc-fsl-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.16

DPIO Driver
- Code cleanup and fix compile warning

RCMP and Guts Driver
- Make use of the helper function devm_platform_ioremap_resource()

* tag 'soc-fsl-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  soc: fsl: rcpm: Make use of the helper function devm_platform_ioremap_resource()
  soc: fsl: guts: Make use of the helper function devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/20211022010027.11866-2-leoyang.li@nxp.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The struct qbman_eq_desc 'd' variable declaration is covering one of the
function parameters. This has no functional impact since this function
parameter was not used after the new declaration.
Even so, rename the variable so that we make the code more readable.

Fixes: 3b2abda7 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Use an explicit NULL pointer when calling qbman_swp_enqueue_multiple()
instead of a plain integer. Without this fix, we get the following
compile time error.

drivers/soc/fsl/dpio/dpio-service.c:466:60: warning: Using plain integer as NULL pointer

Fixes: 9d988097 ("soc: fsl: dpio: Adding QMAN multiple enqueue interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Adds missing #include <linux/mm.h> drivers/tee/optee/smc_abi.c to fix
compile errors like:
drivers/tee/optee/smc_abi.c:405:15: error: implicit
declaration of function 'page_to_section'
[-Werror,-Wimplicit-function-declaration]
        optee_page = page_to_phys(*pages) +
                     ^
arch/arm/include/asm/memory.h:148:43: note: expanded from
macro 'page_to_phys'
                                               ^
include/asm-generic/memory_model.h:52:21: note: expanded
from macro 'page_to_pfn'
                    ^
include/asm-generic/memory_model.h:35:14: note: expanded
from macro '__page_to_pfn'
        int __sec = page_to_section(__pg);                      \
                    ^
drivers/tee/optee/smc_abi.c:405:15: note: did you mean
'__nr_to_section'?
arch/arm/include/asm/memory.h:148:43: note: expanded from
macro 'page_to_phys'
                                               ^
include/asm-generic/memory_model.h:52:21: note: expanded
from macro 'page_to_pfn'
                    ^
include/asm-generic/memory_model.h:35:14: note: expanded
from macro '__page_to_pfn'
        int __sec = page_to_section(__pg);                      \
                    ^
include/linux/mmzone.h:1365:35: note: '__nr_to_section'
declared here
static inline struct mem_section *__nr_to_section(unsigned long nr)

Fixes: c51a564a ("optee: isolate smc abi")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20211021125539.3858495-1-jens.wiklander@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.16, part two

1. Convert LPDDR2 bindings to dtschema and extend them with new
   properties.
2. Tegra 20 EMC: support matching timings by LPDDR2 configuration from
   devicetree.

* tag 'memory-controller-drv-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: tegra20-emc: Add runtime dependency on devfreq governor module
  memory: tegra20-emc: Support matching timings by LPDDR2 configuration
  memory: Add LPDDR2-info helpers
  dt-bindings: memory: tegra20: emc: Document new LPDDR2 sub-node
  dt-bindings: Add vendor prefix for Elpida Memory
  dt-bindings: memory: lpddr2: Document Elpida B8132B2PB-6D-F
  dt-bindings: memory: lpddr2: Add revision-id properties
  dt-bindings: memory: lpddr2: Convert to schema
  dt-bindings: Relocate DDR bindings

Link: https://lore.kernel.org/r/20211021093002.118192-1-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Reset controller updates for v5.16

Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.

* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
  reset: mchp: sparx5: Extend support for lan966x
  dt-bindings: reset: Add lan966x support
  reset: uniphier: Add NX1 reset support
  dt-bindings: reset: uniphier: Add NX1 reset control binding
  reset: uniphier: Add audio system and video input reset control for PXs3
  reset: Allow building Broadcom STB RESCAL as module

Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers

Add FF-A support in OP-TEE driver

Adds supports for the OP-TEE driver to communicate with secure world
using FF-A [1] as transport.

[1] https://developer.arm.com/documentation/den0077/latest

* tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: add FF-A support
  optee: isolate smc abi
  optee: refactor driver with internal callbacks
  optee: simplify optee_release()
  tee: add sec_world_id to struct tee_shm
  tee: optee: Fix missing devices unregister during optee_remove
  tee/optee/shm_pool: fix application of sizeof to pointer

Link: https://lore.kernel.org/r/20211018121324.GA2943530@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Converted in-place without moving file to drivers/clk.

tested on ts7250 (EP9302).

Only setting rate and change parent tested for, as they
are missing on ts7250:
- video
- I2S
- ADC/KEYPAD
- PWM

Only video and I2S clock are interesting, as they are
GATE + double DIV + MUX, all other are pretty much
common but require ep93xx_syscon_swlocked_write to set
registers.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20211018103105.146380-3-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:

WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211018103105.146380-2-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.

* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sun50i-de2: Adjust printing error message
  soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.16:

- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
  domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
  domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.

* tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: imx8m-blk-ctrl: off by one in imx8m_blk_ctrl_xlate()
  soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
  soc: imx: add i.MX8M blk-ctrl driver
  soc: imx: gpcv2: support system suspend/resume
  soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
  soc: imx: gpcv2: add domain option to keep domain clocks enabled
  soc: imx: gpcv2: add lockdep annotation
  Revert "soc: imx: gpcv2: move reset assert after requesting domain power up"
  soc: imx: gpcv2: allow to disable individual power domains
  imx: soc: Select REGMAP_MMIO
  soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain
  soc: imx: gpcv2: Turn domain->pgc into bitfield

Link: https://lore.kernel.org/r/20211016140138.1603-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.

Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.

Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.

Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.comReviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The driver currently just support v1.0 of Arm FFA specification. It also
expects the firmware implementation to match the same and bail out if it
doesn't match. This is causing issue when running with higher version of
firmware implementation(e.g. v1.1 which will released soon).

In order to support compatibility with different firmware versions, let
us add additional checks and find the compatible version the driver can
work with.

Link: https://lore.kernel.org/r/20211013091127.990992-1-sudeep.holla@arm.comReviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

This patch extends sparx5 driver to support also the lan966x. The
process to reset the switch is the same only it has different offsets.
Therefore make the driver more generic and add support for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018091522.1113510-3-horatiu.vultur@microchip.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

This patch extends the existing file microchip,rst.yaml to support
also the lan966x. For this is added only a new compatible string.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211018091522.1113510-2-horatiu.vultur@microchip.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>