Expose two inline functions that return the offset for a register
whose ID is provided; one of them takes an additional argument
that's used for registers that are parameterized.  These both use
a common helper function __ipa_reg_offset(), which just uses the
offset symbols already defined.

Replace all references to the offset macros defined for IPA
registers with calls to ipa_reg_offset() or ipa_reg_n_offset().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new ipa_reg_id enumerated type, which identifies each IPA
register with a symbolic identifier.  Use short names, but in some
cases (such as "BCR") add "IPA_" to the name to help avoid name
conflicts.

Create two functions that indicate register validity.  The first
concisely indicates whether a register is valid for a given version
of IPA, and if so, whether it is defined.  The second indicates
whether a register is valid for TX or RX endpoints.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.

[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/

Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220927003953.1942442-1-keescook@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Enumerate the skb drop reasons in the receive path for IPv6 UDP packets.
Signed-off-by: Donald Hunter <donald.hunter@redhat.com>
Link: https://lore.kernel.org/r/20220926120350.14928-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use ida_alloc_xxx()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20220926012744.3363-1-liubo03@inspur.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

RFC 6209 describes ARIA for TLS 1.2.
ARIA-128-GCM and ARIA-256-GCM are defined in RFC 6209.

This patch would offer performance increment and an opportunity for
hardware offload.

Benchmark results:
iperf-ssl are used.
CPU: intel i3-12100.

  TLS(openssl-3.0-dev)
[  3]  0.0- 1.0 sec   185 MBytes  1.55 Gbits/sec
[  3]  1.0- 2.0 sec   186 MBytes  1.56 Gbits/sec
[  3]  2.0- 3.0 sec   186 MBytes  1.56 Gbits/sec
[  3]  3.0- 4.0 sec   186 MBytes  1.56 Gbits/sec
[  3]  4.0- 5.0 sec   186 MBytes  1.56 Gbits/sec
[  3]  0.0- 5.0 sec   927 MBytes  1.56 Gbits/sec
  kTLS(aria-generic)
[  3]  0.0- 1.0 sec   198 MBytes  1.66 Gbits/sec
[  3]  1.0- 2.0 sec   194 MBytes  1.62 Gbits/sec
[  3]  2.0- 3.0 sec   194 MBytes  1.63 Gbits/sec
[  3]  3.0- 4.0 sec   194 MBytes  1.63 Gbits/sec
[  3]  4.0- 5.0 sec   194 MBytes  1.62 Gbits/sec
[  3]  0.0- 5.0 sec   974 MBytes  1.63 Gbits/sec
  kTLS(aria-avx wirh GFNI)
[  3]  0.0- 1.0 sec   632 MBytes  5.30 Gbits/sec
[  3]  1.0- 2.0 sec   657 MBytes  5.51 Gbits/sec
[  3]  2.0- 3.0 sec   657 MBytes  5.51 Gbits/sec
[  3]  3.0- 4.0 sec   656 MBytes  5.50 Gbits/sec
[  3]  4.0- 5.0 sec   656 MBytes  5.50 Gbits/sec
[  3]  0.0- 5.0 sec  3.18 GBytes  5.47 Gbits/sec
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/20220925150033.24615-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Minor spell fix related to 'stmmac_clk_csr_set()' inside a
comment used in the 'stmmac_probe_config_dt()' function.

Cc: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220924104514.1666947-1-bhupesh.sharma@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

d8b6171b ("selftests/io_uring: test zerocopy send") added io_uring
zerocopy tests but forgot to enable it in make runs. Add missing
io_uring_zerocopy_tx.sh into TEST_PROGS.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/28e743602cdd54ffc49f68bbcbcbafc59ba22dc2.1664142210.git.asml.silence@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
devlink: fix order of port and netdev register in drivers

Some of the drivers use wrong order in registering devlink port and
netdev, registering netdev first. That was not intended as the devlink
port is some sort of parent for the netdev. Fix the ordering.

Note that the follow-up patchset is going to make this ordering
mandatory.
====================

Link: https://lore.kernel.org/r/20220926110938.2800005-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that devlink port is registered first and register netdev
after. Unregister netdev before devlnk port unregister.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that netdevice is registered/unregistered while devlink port
is registered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the order of destroy_netdev() flow and unregister the devlink port
after calling unregister_netdev().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove some left-over from commit e2be04c7 ("License cleanup: add SPDX
license identifier to uapi header files with a license")

When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/88410cddd31197ea26840d7dd71612bece8c6acf.1663871981.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated. This
split already existed for the "firstfrag" case, so just generalize the
logic further.

[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/

Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220924040835.3364912-1-keescook@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As sizeof(hwe->data) can now longer be used as the actual size depends
on foe_entry_size, in commit 9d8cb4c0
("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") the
use of sizeof(hwe->data) is hence replaced.

However, replacing it with ppe->eth->soc->foe_entry_size is wrong as
foe_entry_size represents the size of the whole descriptor and not just
the 'data' field.

Fix this by subtracing the size of the only other field in the struct
'ib1', so we actually end up with the correct size to be copied to the
data field.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 9d8cb4c0 ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/YzBqPIgQR2gLrPoK@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In function mtk_foe_entry_set_vlan() the call to field accessor macro
FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, entry->ib1)
has been wrongly replaced by
mtk_prep_ib1_vlan_layer(eth, entry->ib1)

Use correct helper function mtk_get_ib1_vlan_layer instead.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 03a3180e ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/YzBp+Kk04CFDys4L@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Weiß says:

====================
net: openvswitch: metering and conntrack in userns

Currently using openvswitch in a non-initial user namespace, e.g., an
unprivileged container, is possible but without metering and conntrack
support. This is due to the restriction of the corresponding Netlink
interfaces to the global CAP_NET_ADMIN.

This simple patches switch from GENL_ADMIN_PERM to GENL_UNS_ADMIN_PERM
in several cases to allow this also for the unprivileged container
use case.

We tested this for unprivileged containers created by the container
manager of GyroidOS (gyroidos.github.io). However, for other container
managers such as LXC or systemd which provide unprivileged containers
this should be apply equally.
====================

Link: https://lore.kernel.org/r/20220923133820.993725-1-michael.weiss@aisec.fraunhofer.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Similar to the previous commit, the Netlink interface of the OVS
conntrack module was restricted to global CAP_NET_ADMIN by using
GENL_ADMIN_PERM. This is changed to GENL_UNS_ADMIN_PERM to support
unprivileged containers in non-initial user namespace.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The Netlink interface for metering was restricted to global CAP_NET_ADMIN
by using GENL_ADMIN_PERM. To allow metring in a non-inital user namespace,
e.g., a container, this is changed to GENL_UNS_ADMIN_PERM.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This enables SO_REUSEPORT [1] for clcsock when it is set on smc socket,
so that some applications which uses it can be transparently replaced
with SMC. Also, this helps improve load distribution.

Here is a simple test of NGINX + wrk with SMC. The CPU usage is collected
on NGINX (server) side as below.

Disable SO_REUSEPORT:

05:15:33 PM  CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:15:34 PM  all    7.02    0.00   11.86    0.00    2.04    8.93    0.00    0.00    0.00   70.15
05:15:34 PM    0    0.00    0.00    0.00    0.00   16.00   70.00    0.00    0.00    0.00   14.00
05:15:34 PM    1   11.58    0.00   22.11    0.00    0.00    0.00    0.00    0.00    0.00   66.32
05:15:34 PM    2    1.00    0.00    1.00    0.00    0.00    0.00    0.00    0.00    0.00   98.00
05:15:34 PM    3   16.84    0.00   30.53    0.00    0.00    0.00    0.00    0.00    0.00   52.63
05:15:34 PM    4   28.72    0.00   44.68    0.00    0.00    0.00    0.00    0.00    0.00   26.60
05:15:34 PM    5    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:15:34 PM    6    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:15:34 PM    7    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00

Enable SO_REUSEPORT:

05:15:20 PM  CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:15:21 PM  all    8.56    0.00   14.40    0.00    2.20    9.86    0.00    0.00    0.00   64.98
05:15:21 PM    0    0.00    0.00    4.08    0.00   14.29   76.53    0.00    0.00    0.00    5.10
05:15:21 PM    1    9.09    0.00   16.16    0.00    1.01    0.00    0.00    0.00    0.00   73.74
05:15:21 PM    2    9.38    0.00   16.67    0.00    1.04    0.00    0.00    0.00    0.00   72.92
05:15:21 PM    3   10.42    0.00   17.71    0.00    1.04    0.00    0.00    0.00    0.00   70.83
05:15:21 PM    4    9.57    0.00   15.96    0.00    0.00    0.00    0.00    0.00    0.00   74.47
05:15:21 PM    5    9.18    0.00   15.31    0.00    0.00    1.02    0.00    0.00    0.00   74.49
05:15:21 PM    6    8.60    0.00   15.05    0.00    0.00    0.00    0.00    0.00    0.00   76.34
05:15:21 PM    7   12.37    0.00   14.43    0.00    0.00    0.00    0.00    0.00    0.00   73.20

Using SO_REUSEPORT helps the load distribution of NGINX be more
balanced.

[1] https://man7.org/linux/man-pages/man7/socket.7.htmlSigned-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20220922121906.72406-1-tonylu@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sean Anderson says:

====================
net: sunhme: Cleanups and logging improvements

This series is a continuation of [1] with a focus on logging improvements (in
the style of commit b11e5f6a ("net: sunhme: output link status with a single
print.")). I have included several of Rolf's patches in the series where
appropriate (with slight modifications). After this series is applied, many more
messages from this driver will come with driver/device information.
Additionally, most messages (especially debug messages) have been condensed onto
one line (as KERN_CONT messages get split).

[1] https://lore.kernel.org/netdev/4686583.GXAFRqVoOG@eto.sf-tec.de/
====================

Link: https://lore.kernel.org/r/20220924015339.1816744-1-seanga2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I have the hardware so at the very least I can test things.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The SXD, TXD, and RXD macros are used only once (or twice). Just use the
vdbg print, which seems to have been devised for these sorts of very
verbose messages.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This driver seems to have been written under the assumption that messages
can be continued arbitrarily. I'm not when this changed (if ever), but such
ad-hoc continuations are liable to be rudely interrupted. Convert all such
instances to single prints. This loses a bit of timing information (such as
when a line was constructed piecemeal as the function executed), but it's
easy to add a few prints if necessary. This also adds newlines to the ends
of any prints without them.

Since (almost every) debug print included the name of the function, include
it automatically.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Wherever possible, use the associated netdev (or device) when printing
errors or other messages. This makes it immediately clear what device
caused the error, and provides more information than just the device name.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a mostly-mechanical translation of the existing printks into
pr_foos. In several places, I have pasted messages which were broken over
several lines to allow for easier grepping.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove all the single-use debug conditionals, and just collect the debug
defines at the top of the file. HMD seems like it is used for general debug
info, so just redefine it as pr_debug. Additionally, instead of using the
default loglevel, use the debug loglevel for debugging.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the power of variadic macros, double parentheses are unnecessary.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This not only removes a lot of code, it also fixes the memleak of the DMA
memory when register_netdev() fails.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
[ rebased onto net-next/master; fixed error reporting ]
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes several error paths to ensure they return an appropriate error
(instead of ENODEV).
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to differentiate between a missing bridge and an OOM condition,
return ERR_PTRs from quattro_pci_find. This also does some general linting
in the area.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This already returns a proper error value, so pass it to the caller.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Module versions are not very useful:

> The basic problem is, the version string does not identify the sources
> with enough accuracy. It says nothing about back ported fixes in
> stable kernels. It tells you nothing about vendor patches to the
> network core, etc.

https://lore.kernel.org/all/Yf6mtvA1zO7cdzr7@lunn.ch/

While we're at it, inline the author and use the driver name a bit more.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I can't find a reference to it in the entire git history.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Yang Yingliang says:

====================
net: dsa: remove unnecessary i2c_set_clientdata()

This patchset https://lore.kernel.org/all/20220921140524.3831101-8-yangyingliang@huawei.com/T/
removed all set_drvdata(NULL) in driver remove function.

i2c_set_clientdata() is another wrapper of set drvdata function, to follow
the same convention, remove i2c_set_clientdata() called in driver remove
function in drivers/net/dsa/.
====================

Link: https://lore.kernel.org/r/20220923143742.87093-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Practical experience (and advice from Alexei) tell us that bitfields in
structs lead to un-optimized assembly code. I've verified this change
does lead to better x86_64 assembly, both via objdump and playing with
code snippets in godbolt.org.

Using scripts/bloat-o-meter shows the code size is reduced with 24
bytes for xdp_convert_buff_to_frame() that gets inlined e.g. in
i40e_xmit_xdp_tx_ring() which were used for microbenchmarking.

Microbenchmarking results do show improvements, but very small and
varying between 0.5 to 2 nanosec improvement per packet.

The member @metasize is changed from u8 to u32. Future users of this
area could split this into two u16 fields. I've also benchmarked with
two u16 fields showing equal performance gains and code size reduction.

The moved member @frame_sz doesn't change sizeof struct due to existing
padding. Like xdp_buff member @frame_sz is placed next to @flags, which
allows compiler to optimize assignment of these.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/166393728005.2213882.4162674859542409548.stgit@firesoulSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Improve tsn_lib selftests for future distributed tasks

Some of the boards I am working with are limited in the number of ports
that they offer, and as more TSN related selftests are added, it is
important to be able to distribute the work among multiple boards.
A large part of implementing that is ensuring network-wide
synchronization, but also permitting more streams of data to flow
through the network. There is the more important aspect of also
coordinating the timing characteristics of those streams, and that is
also something that is tackled, although not in this modest patch set.
The goal here is not to introduce new selftests yet, but just to lay a
better foundation for them. These patches are a part of the cleanup work
I've done while working on selftests for frame preemption. They are
regression-tested with psfp.sh.
====================

Link: https://lore.kernel.org/r/20220923210016.3406301-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>