- 13 May, 2024 1 commit
-
-
Michael Ellerman authored
Merge our KVM topic branch.
-
- 10 May, 2024 5 commits
-
-
Hari Bathini authored
Since commit 5c4233cc ("powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency"), crashing_cpu is not available without CONFIG_CRASH_DUMP. Fix compile error on 64-BIT 85xx owing to this change. Fixes: 5c4233cc ("powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency") Cc: stable@vger.kernel.org # v6.9+ Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Closes: https://lore.kernel.org/all/fa247ae4-5825-4dbe-a737-d93b7ab4d4b9@xenosoft.de/Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Hari Bathini authored
Update ABI documentation about the introduction of the new sysfs entry bootargs_append. This sysfs entry will be used to setup the additional parameters to be passed to dump capture kernel. Signed-off-by:
-
Hari Bathini authored
Append the additional parameters passed/set in the dedicated parameter area (RTAS_FADUMP_PARAM_AREA) to bootargs in fadump capture kernel. Signed-off-by:
-
Hari Bathini authored
For fadump case, passing additional parameters to dump capture kernel helps in minimizing the memory footprint for it and also provides the flexibility to disable components/modules, like hugepages, that are hindering the boot process of the special dump capture environment. Set up a dedicated parameter area to be passed to the capture kernel. This area type is defined as RTAS_FADUMP_PARAM_AREA. Sysfs attribute '/sys/kernel/fadump/bootargs_append' is exported to the userspace to specify the additional parameters to be passed to the capture kernel Signed-off-by:
-
Hari Bathini authored
Currently, fadump on pseries assumes a single boot memory region even though f/w supports more than one boot memory region. Add support for more boot memory regions to make the implementation flexible for any enhancements that introduce other region types. For this, rtas memory structure for fadump is updated to have multiple boot memory regions instead of just one. Additionally, methods responsible for creating the fadump memory structure during both the first and second kernel boot have been modified to take these multiple boot memory regions into account. Also, a new callback has been added to the fadump_ops structure to get the maximum boot memory regions supported by the platform. Signed-off-by:
Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by:
-
- 08 May, 2024 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in the help message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 07 May, 2024 26 commits
-
-
Christophe JAILLET authored
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info() The return value of kvmppc_gse_put_buff_info() is not assigned to 'rc' and 'rc' is uninitialized at this point. So the error handling can not work. Assign the expected value to 'rc' to fix the issue. Fixes: 19d31c5f ("KVM: PPC: Add support for nestedv2 guests") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
-
Joel Stanley authored
The documentation mentions KVM_CAP_PPC_RADIX_MMU, but the defines in the kvm headers spell it KVM_CAP_PPC_MMU_RADIX. Similarly with KVM_CAP_PPC_MMU_HASH_V3. Fixes: c9270132 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU") Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Kunwu Chan authored
This part was commented from commit 2f4cf5e4 ("Add book3s.c") in about 14 years before. If there are no plans to enable this part code in the future, we can remove this dead code. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
-
Vaibhav Jain authored
This reverts commit 180c6b07 ("KVM: PPC: Book3S HV nestedv2: Do not cancel pending decrementer exception") [1] which prevented canceling a pending HDEC exception for nestedv2 KVM guests. It was done to avoid overhead of a H_GUEST_GET_STATE hcall to read the 'DEC expiry TB' register which was higher compared to handling extra decrementer exceptions. However recent benchmarks indicate that overhead of not handling 'DECR' expiry for Nested KVM Guest(L2) is higher and results in much larger exits to Pseries Host(L1) as indicated by the Unixbench-arithoh bench[2] Metric | Current upstream | Revert [1] | Difference % ======================================================================== arithoh-count (10) | 3244831634 | 3403089673 | +04.88% kvm_hv:kvm_guest_exit | 513558 | 152441 | -70.32% probe:kvmppc_gsb_recv | 28060 | 28110 | +00.18% N=1 As indicated by the data above that reverting [1] results in substantial reduction in number of L2->L1 exits with only slight increase in number of H_GUEST_GET_STATE hcalls to read the value of 'DEC expiry TB'. This results in an overall ~4% improvement of arithoh[2] throughput. [1] commit 180c6b07 ("KVM: PPC: Book3S HV nestedv2: Do not cancel pending decrementer exception") [2] https://github.com/kdlucas/byte-unixbench/ Fixes: 180c6b07 ("KVM: PPC: Book3S HV nestedv2: Do not cancel pending decrementer exception") Signed-off-by:
-
Greg Kurz authored
All these commands end up peeking into the PACA using the user originated cpu id as an index. Check the cpu id is valid in order to prevent xmon to crash. Instead of printing an error, this follows the same behavior as the "lp s #" command : ignore the buggy cpu id parameter and fall back to the #-less version of the command. Signed-off-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Benjamin Gray authored
The patching page set up as a writable alias may be in quadrant 0 (userspace) if the temporary mm path is used. This causes sanitiser failures if so. Sanitiser failures also occur on the non-mm path because the plain memset family is instrumented, and KASAN treats the patching window as poisoned. Introduce locally defined patch_* variants of memset that perform an uninstrumented lower level set, as well as detecting write errors like the original single patch variant does. copy_to_user() is not correct here, as the PTE makes it a proper kernel page (the EAA is privileged access only, RW). It just happens to be in quadrant 0 because that's the hardware's mechanism for using the current PID vs PID 0 in translations. Importantly, it's incorrect to allow user page accesses. Now that the patching memsets are used, we also propagate a failure up to the caller as the single patch variant does. Signed-off-by:
Benjamin Gray <bgray@linux.ibm.com> Signed-off-by:
-
Benjamin Gray authored
patch_instructions() introduces new behaviour with a couple of variations. Test each case of * a repeated 32-bit instruction, * a repeated 64-bit instruction (ppc64), and * a copied sequence of instructions for both on a single page and when it crosses a page boundary. Signed-off-by:
-
Benjamin Gray authored
The kasan_init_phys_region() function maps shadow pages necessary for the ranges of the linear map backed by physical pages. Currently kasan_init_phys_region() is being passed physical addresses, but kasan_mem_to_shadow() expects virtual addresses. It works right now because the lower bits (12:64) of the kasan_mem_to_shadow() calculation are the same for the real and virtual addresses, so the actual PTE value is the same in the end. But virtual addresses are the intended input, so fix it. Signed-off-by:
-
Matthias Schiffer authored
This register number is hardware-specific, rename it for clarity. FIXME comments are added in a few places where it seems like the wrong register is used. As I can't test this, only the rename is done with no functional change. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by:
-
Bjorn Helgaas authored
Fix typos, most reported by "codespell arch/powerpc". Only touches comments, no code changes. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Ghanshyam Agrawal authored
Fix spelling of the word "auxillary" in arch/powerpc/kernel/eeh_pe.c and arch/powerpc/include/asm/eeh.h. Also update the eeh_set_pe_aux_size() comment to include the units. Signed-off-by:
Ghanshyam Agrawal <ghanshyam1898@gmail.com> [mpe: Squash into one commit] Signed-off-by:
-
Michael Ellerman authored
If both CONFIG_SENSORS_AMS_PMU and CONFIG_SENSORS_AMS_I2C are unset, there is an unused variable warning in the ams driver: drivers/macintosh/ams/ams-core.c: In function 'ams_init': drivers/macintosh/ams/ams-core.c:181:29: warning: unused variable 'np' 181 | struct device_node *np; The driver needs at least one of the configs enabled in order to actually function. So fix the compiler warning by ensuring at least one of the configs is enabled. Suggested-by:Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Naveen N Rao authored
All supported compilers today (gcc v5.1+ and clang v11+) have support for -mcmodel=medium. As such, NO_MINIMAL_TOC is no longer being set. Remove NO_MINIMAL_TOC as well as the fallback to -mminimal-toc. Reviewed-by:
Naveen N Rao <naveen@kernel.org> Signed-off-by:
-
Kunwu Chan authored
This part was commented in about 19 years before. If there are no plans to enable this part code in the future, we can remove this dead code. Signed-off-by:
-
Kunwu Chan authored
This part was commented from commit a33a7d73 ("[PATCH] spufs: implement mfc access for PPE-side DMA") in about 18 years before. If there are no plans to enable this part code in the future, we can remove this dead code. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Kunwu Chan authored
This part was commented from commit 165785e5 ("[POWERPC] Cell iommu support") in about 17 years before. If there are no plans to enable this part code in the future, we can remove this dead code. Signed-off-by:
-
GUO Zihua authored
The first 32k of memory is reserved for interrupt vectors, however for powerpc64 this might not be enough. Fix this by reserving the maximum size between 32k and the real size of interrupt vectors. Signed-off-by:
GUO Zihua <guozihua@huawei.com> Signed-off-by:
-
Li Yang authored
Update the node name to be align with binding document. Signed-off-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
Frank Li <Frank.Li@nxp.com> Signed-off-by:
-
Li Yang authored
Update dts to match dts binding document. Signed-off-by:
-
Xiaowei Bao authored
Due to the INTA is shared with the active-low PHY2 interrupt on P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as active-low, the P1010RDB-PB board is used separately, so configure P1010RDB-PB's INTA with polarity as active-high. The INTX in P1010RDB-PB do not work because of the pcie@0 node fixup will be overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup to p1010rdb-pb.dts and p1010rdb-pb_36b.dts. Signed-off-by:
Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by:
-
Ran Wang authored
Enable Power Management feature on device tree, including MPC8536, MPC8544, MPC8548, MPC8572, P1010, P1020, P1021, P1022, P2020, P2041, P3041, T104X, T1024. Signed-off-by:
Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Signed-off-by:
-
Yang Li authored
This commit adds kernel-doc style comments with complete parameter descriptions for the function smp_startup_cpu(). Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Yang Li authored
Fix some function names in kernel-doc comments. Signed-off-by:
-
Yang Li authored
Fix the kernel-doc annotation for the 'skip' parameter in the partial_decompress() function by adding a missing underscore and colon. Signed-off-by:
-
Masahiro Yamada authored
Commit ab1a517d ("powerpc/syscall: Rename syscall_64.c into interrupt.c") missed to update these three lines: GCOV_PROFILE_syscall_64.o := n KCOV_INSTRUMENT_syscall_64.o := n UBSAN_SANITIZE_syscall_64.o := n To restore the original behavior, we could replace them with: GCOV_PROFILE_interrupt.o := n KCOV_INSTRUMENT_interrupt.o := n UBSAN_SANITIZE_interrupt.o := n However, nobody has noticed the functional change in the past three years, so they were unneeded. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Christophe Leroy authored
Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b0 ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by:
-
- 06 May, 2024 7 commits
-
-
Michael Ellerman authored
There is code that builds with calls to IO accessors even when CONFIG_PCI=n, but the actual calls are guarded by runtime checks. If not those calls would be faulting, because the page at virtual address zero is (usually) not mapped into the kernel. As Arnd pointed out, it is possible a large port value could cause the address to be above mmap_min_addr which would then access userspace, which would be a bug. To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That is a value chosen to point into unmapped space between the kernel and userspace, so any access will always fault. Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an effect on 64-bit. Signed-off-by:
-
Michael Ellerman authored
With -Wextra clang warns about pointer arithmetic using a null pointer. When building with CONFIG_PCI=n, that triggers a warning in the IO accessors, eg: In file included from linux/arch/powerpc/include/asm/io.h:672: linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb' 591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); | ~~~~~~~~~~~~~~~~~~~~~ ^ That is because when CONFIG_PCI=n, _IO_BASE is defined as 0. Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts it to void * before the addition with port happens. Instead the addition can be done first, and then the cast. The resulting value will be the same, but avoids the warning, and also avoids void pointer arithmetic which is apparently non-standard. Reported-by:Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.comSigned-off-by:
-
Hari Bathini authored
Currently, bpf jit code on powerpc assumes all the bpf functions and helpers to be part of core kernel text. This is false for kfunc case, as function addresses may not be part of core kernel text area. So, add support for addresses that are not within core kernel text area too, to enable kfunc support. Emit instructions based on whether the function address is within core kernel text address or not, to retain optimized instruction sequence where possible. In case of PCREL, as a bpf function that is not within core kernel text area is likely to go out of range with relative addressing on kernel base, use PC relative addressing. If that goes out of range, load the full address with PPC_LI64(). With addresses that are not within core kernel text area supported, override bpf_jit_supports_kfunc_call() to enable kfunc support. Also, override bpf_jit_supports_far_kfunc_call() to enable 64-bit pointers, as an address offset can be more than 32-bit long on PPC64. Signed-off-by:
-
Hari Bathini authored
With PCREL addressing, there is no kernel TOC. So, it is not setup in prologue when PCREL addressing is used. But the number of instructions to skip on a tail call was not adjusted accordingly. That resulted in not so obvious failures while using tailcalls. 'tailcalls' selftest crashed the system with the below call trace: bpf_test_run+0xe8/0x3cc (unreliable) bpf_prog_test_run_skb+0x348/0x778 __sys_bpf+0xb04/0x2b00 sys_bpf+0x28/0x38 system_call_exception+0x168/0x340 system_call_vectored_common+0x15c/0x2ec Also, as bpf programs are always module addresses and a bpf helper in general is a core kernel text address, using PC relative addressing often fails with "out of range of pcrel address" error. Switch to using kernel base for relative addressing to handle this better. Fixes: 7e3a68be ("powerpc/64: vmlinux support building with PCREL addresing") Cc: stable@vger.kernel.org # v6.4+ Signed-off-by:
-
Stephen Rothwell authored
This list was moved many years ago. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Benjamin Gray authored
Documents how to use the PR_PPC_GET_DEXCR and PR_PPC_SET_DEXCR prctl()'s for changing a process's DEXCR or its process tree default value. Signed-off-by:
-
Benjamin Gray authored
Adds a utility to exercise the prctl DEXCR inheritance in the shell. Supports setting and clearing each aspect. Signed-off-by:
-
