- 06 Jan, 2020 8 commits
-
-
Daniel Borkmann authored
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215 #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in f1174f77 ("bpf/verifier: rework value tracking"). Fixes: f1174f77 ("bpf/verifier: rework value tracking") Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
-
Roman Gushchin authored
Before commit 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Vikas Gupta authored
Fix calling multiple tee_client_close_context in case of shm allocation fails. Fixes: 24688095 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”) Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest. Fixes: 33641994 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: -
Xin Long authored
This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Ying Xue authored
syzbot found the following crash on: ===================================================== BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline] BUG: KMSAN: uninit-value in nlmsg_parse_deprecated include/net/netlink.h:706 [inline] BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245 __nlmsg_parse include/net/netlink.h:661 [inline] nlmsg_parse_deprecated include/net/netlink.h:706 [inline] __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x444179 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20 R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x309/0xa50 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] nlmsg_new include/net/netlink.h:888 [inline] tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ===================================================== The complaint above occurred because the memory region pointed by attrbuf variable was not initialized. To eliminate this warning, we use kcalloc() rather than kmalloc_array() to allocate memory for attrbuf. Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
- 05 Jan, 2020 4 commits
-
-
Stephen Boyd authored
The only clk init function in this driver that register a clk is fu540_c000_clk_init(), and thus we need to unregister the clk when this driver is removed on that platform. Other init functions, for example macb_clk_init(), don't register clks and therefore we shouldn't unregister the clks when this driver is removed. Convert this registration path to devm so it gets auto-unregistered when this driver is removed and drop the clk_unregister() calls in driver remove (and error paths) so that we don't erroneously remove a clk from the system that isn't registered by this driver. Otherwise we get strange crashes with a use-after-free when the devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer that has become invalid because it is freed in clk_unregister(). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Yash Shah <yash.shah@sifive.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: c218ad55 ("macb: Add support for SiFive FU540-C000") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The emails to ks.giri@samsung.com and vipul.pandya@samsung.com bounce with 550 error code: host mailin.samsung.com[203.254.224.12] said: 550 5.1.1 Recipient address rejected: User unknown (in reply to RCPT TO command)" Drop Girish K S and Vipul Pandya from sxgbe maintainers entry. Cc: Byungho An <bh74.an@samsung.com> Signed-off-by: -
Carl Huang authored
The len used for skb_put_padto is wrong, it need to add len of hdr. In qrtr_node_enqueue, local variable size_t len is assign with skb->len, then skb_push(skb, sizeof(*hdr)) will add skb->len with sizeof(*hdr), so local variable size_t len is not same with skb->len after skb_push(skb, sizeof(*hdr)). Then the purpose of skb_put_padto(skb, ALIGN(len, 4)) is to add add pad to the end of the skb's data if skb->len is not aligned to 4, but unfortunately it use len instead of skb->len, at this line, skb->len is 32 bytes(sizeof(*hdr)) more than len, for example, len is 3 bytes, then skb->len is 35 bytes(3 + 32), and ALIGN(len, 4) is 4 bytes, so __skb_put_padto will do nothing after check size(35) < len(4), the correct value should be 36(sizeof(*hdr) + ALIGN(len, 4) = 32 + 4), then __skb_put_padto will pass check size(35) < len(36) and add 1 byte to the end of skb's data, then logic is correct. function of skb_push: void *skb_push(struct sk_buff *skb, unsigned int len) { skb->data -= len; skb->len += len; if (unlikely(skb->data < skb->head)) skb_under_panic(skb, len, __builtin_return_address(0)); return skb->data; } function of skb_put_padto static inline int skb_put_padto(struct sk_buff *skb, unsigned int len) { return __skb_put_padto(skb, len, true); } function of __skb_put_padto static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len, bool free_on_error) { unsigned int size = skb->len; if (unlikely(size < len)) { len -= size; if (__skb_pad(skb, len, free_on_error)) return -ENOMEM; __skb_put(skb, len); } return 0; } Signed-off-by:Carl Huang <cjhuang@codeaurora.org> Signed-off-by:
Wen Gong <wgong@codeaurora.org> Signed-off-by:
-
Fenghua Yu authored
Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS. In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel. Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations. Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit(). Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
- 03 Jan, 2020 10 commits
-
-
Liran Alon authored
Current code use dma_wmb() to ensure Rx/Tx descriptors are visible to device before writing to doorbell. However, these dma_wmb() are wrong and unnecessary. Therefore, they should be removed. iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell() should guaratee that all previous writes to WB/UC memory is visible to device before the write done by iowrite32be(). E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb() and only then calls __raw_writel(). Reviewed-by:
Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Russell King authored
The kernel test robot reports a boot failure with qemu in 5.5-rc, referencing commit 2203cbf2 ("net: sfp: move fwnode parsing into sfp-bus layer"). This is caused by phylink_create() being passed a NULL fwnode, causing fwnode_property_get_reference_args() to return -EINVAL. Don't attempt to attach to a SFP bus if we have no fwnode, which avoids this issue. Reported-by:
kernel test robot <rong.a.chen@intel.com> Fixes: 2203cbf2 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Jesper Dangaard Brouer authored
DaveM's git tree have been moved into a named subdir 'netdev' to deal with allowing Jakub Kicinski to help co-maintain the trees. Link: https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.htmlSigned-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Hangbin Liu authored
The loopback feature is only supported on a few drivers like broadcom, mellanox, etc. The default veth driver has not supported it yet. To avoid returning failed and making the runner feel confused, let's just skip the test on drivers that not support loopback. Fixes: ad113409 ("selftests: Add loopback test") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
David S. Miller authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.5-20200102' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by:
-
Andrew Lunn authored
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5 ("net: fec: optimize the clock management to save power") Reported-by:
Chris Healy <Chris.Healy@zii.aero> Signed-off-by:
-
Hangbin Liu authored
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafc ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class") Signed-off-by:
-
Wen Yang authored
The variables 'window_interval' is u64 and do_div() truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. The unit of window_interval is nanoseconds, so its lower 32-bit is relatively easy to exceed. Fix this issue by using div64_u64() instead. Fixes: 7298de9c ("sch_cake: Add ingress mode") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: cake@lists.bufferbloat.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
David S. Miller authored
It can take on the values of '0', '1', and '2' and thus is not a boolean. Signed-off-by:
-
- 02 Jan, 2020 11 commits
-
-
Pengcheng Yang authored
When we receive a D-SACK, where the sequence number satisfies: undo_marker <= start_seq < end_seq <= prior_snd_una we consider this is a valid D-SACK and tcp_is_sackblock_valid() returns true, then this D-SACK is discarded as "old stuff", but the variable first_sack_index is not marked as negative in tcp_sacktag_write_queue(). If this D-SACK also carries a SACK that needs to be processed (for example, the previous SACK segment was lost), this SACK will be treated as a D-SACK in the following processing of tcp_sacktag_write_queue(), which will eventually lead to incorrect updates of undo_retrans and reordering. Fixes: fd6dad61 ("[TCP]: Earlier SACK block verification & simplify access to them") Signed-off-by:
Pengcheng Yang <yangpc@wangsu.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Baruch Siach authored
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d2 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by:
Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
-
Florian Faber authored
Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a50 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by:
Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Johan Hovold authored
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by:
Johan Hovold <johan@kernel.org> Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by:
-
Johan Hovold authored
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by:
-
Oliver Hartkopp authored
KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47 ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
-
Gustavo A. R. Silva authored
Fix inconsistent IS_ERR and PTR_ERR in tcan4x5x_parse_config(). The proper pointer to be passed as argument is tcan4x5x->device_wake_gpio. This bug was detected with the help of Coccinelle. Fixes: 2de49735 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
If the device state GPIO is not connected to the host then disable the INH output from the TCAN device per section 8.3.5 of the data sheet. Signed-off-by:
-
Sean Nyekjaer authored
It's a good idea to reset a ip-block/spi device before using it, this patch will reset the device. And a generic reset function if needed elsewhere. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Dan Murphy authored
The tcan4x5x_parse_config() function now performs action on the device either reading or writing and a reset. If the devive has a switchable power supppy (i.e. regulator is managed) it needs to be turned on. So turn on the regulator if available. If the parsing fails, turn off the regulator. Fixes: 2de49735 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by:
-
Sean Nyekjaer authored
The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error: | tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module | tcan4x5x spi2.0: m_can device registered (irq=84, version=32) | tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized. When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode. So this patch will put the tcan device in normal mode before the m_can driver does the initialization. Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: stable@vger.kernel.org Signed-off-by:
-
- 31 Dec, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ... -
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds authored
Pull tomoyo fixes from Tetsuo Handa: "Two bug fixes: - Suppress RCU warning at list_for_each_entry_rcu() - Don't use fancy names on sockets" * tag 'tomoyo-fixes-for-5.5' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Suppress RCU warning at list_for_each_entry_rcu(). tomoyo: Don't use nifty names on sockets.
-
Taehee Yoo authored
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com Fixes: 4c2d5e33 ("hsr: rename debugfs file when interface name is changed") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Davide Caratti authored
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e4 ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
-
Cambda Zhu authored
>From commit 50895b9d ("tcp: highest_sack fix"), the logic about setting tp->highest_sack to the head of the send queue was removed. Of course the logic is error prone, but it is logical. Before we remove the pointer to the highest sack skb and use the seq instead, we need to set tp->highest_sack to NULL when there is no skb after the last sack, and then replace NULL with the real skb when new skb inserted into the rtx queue, because the NULL means the highest sack seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent, the next ACK with sack option will increase tp->reordering unexpectedly. This patch sets tp->highest_sack to the tail of the rtx queue if it's NULL and new data is sent. The patch keeps the rule that the highest_sack can only be maintained by sack processing, except for this only case. Fixes: 50895b9d ("tcp: highest_sack fix") Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by:
-
Vladis Dronov authored
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#uAnalyzed-by:Stephen Johnston <sjohnsto@redhat.com> Analyzed-by:
Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a764 ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
