- 28 Oct, 2020 2 commits
-
-
Srinivas Kandagatla authored
digital gain range is -84dB min to 40dB max, however this was not correctly specified in the range. Fix this by with correct range! Fixes: 8c4f021d ("ASoC: wcd9335: add basic controls") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201028154340.17090-2-srinivas.kandagatla@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
digital gain range is -84dB min to 40dB max, however this was not correctly specified in the range. Fix this by with correct range! Fixes: 1cde8b82 ("ASoC: wcd934x: add basic controls") Signed-off-by:
-
- 23 Oct, 2020 4 commits
-
-
Bard Liao authored
Do not emit a warning for extended firmware header fields that are not used by kernel. This creates unnecessary noise to kernel logs like: sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 3 size 0x1c sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 4 size 0x10 Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201021182419.1160391-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Olivier Moysan authored
A delay must be introduced before the shutdown down of the mclk, as stated in CS42L51 datasheet. Otherwise the codec may produce some noise after the end of DAPM power down sequence. The delay between DAC and CLOCK_SUPPLY widgets is too short. Add a delay in mclk shutdown request to manage the shutdown delay explicitly. From experiments, at least 10ms delay is necessary. Set delay to 20ms as recommended in Documentation/timers/timers-howto.rst when using msleep(). Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20201020150109.482-1-olivier.moysan@st.comSigned-off-by:
-
Srinivas Kandagatla authored
With the current state of code, we would endup with something like below in /proc/asound/cards for 2 machines based on this driver. Machine 1: 0 [DB845c ]: DB845c - DB845c DB845c Machine 2: 0 [LenovoYOGAC6301]: Lenovo-YOGA-C63 - Lenovo-YOGA-C630-13Q50 LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216 This is not very UCM friendly both w.r.t to common up configs and card identification, and UCM2 became totally not usefull with just one ucm sdm845.conf for two machines which have different setups w.r.t HDMI and other dais. Reasons for such thing is partly because Qualcomm machine drivers never cared to set driver_name. This patch sets up driver name for the this driver to sort out the UCM integration issues! after this patch contents of /proc/asound/cards: Machine 1: 0 [DB845c ]: sdm845 - DB845c DB845c Machine 2: 0 [LenovoYOGAC6301]: sdm845 - Lenovo-YOGA-C630-13Q50 LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216 with this its possible to align with what UCM2 expects and we can have sdm845/DB845.conf sdm845/LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216.conf ... for board variants. This should scale much better! Signed-off-by: -
Srinivas Kandagatla authored
Add missing supported rates and formats for the stream, without which attempt to do playback will fail to find any matching rates/format. Fixes: a0aab9e1 ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by:
-
- 19 Oct, 2020 1 commit
-
-
Tzung-Bi Shih authored
RT1015's output widget name is "SPO" instead of "Speaker". Fixes it to use the correct names. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20201019044724.1601476-1-tzungbi@google.comSigned-off-by:
-
- 14 Oct, 2020 4 commits
-
-
Cezary Rojewski authored
Stress tests show that DSP may occasionally be late with signaling WAIT state when all pins are made use of simultaneously plus start/stop (pause) gets involved. While this isn't tied to standard audio scenarios where only System Pin (playback and capture) is involved, ensure user is not hindered when playing with more advanced scenarios. >From DSP perspective, clock acts as a resource: low clock equals less resources, high clock more resources. Relax clock selection procedure so only low -> high switch is allowed when awaiting WAIT signal times out. Once active stream count decreases, DSP will have more time internally to adjust thus low clock selection becomes possible again. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20201012103221.30759-2-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
catpt_dai_pcm_new() invoked during new PCM runtime creation configures SSP by sending IPC to DSP firmware. For that to succeed device needs to be up and running. While components default probing behavior - snd_soc_catpt causing machine board module to load just after it - needs no changes, machine board's module may be unloaded and re-loaded at a different time e.g.: when catpt is already asleep. Wake device explicitly in catpt_dai_pcm_new() to ensure communication is established before sending any IPCs, enabling those advanced scenarios in the process. Signed-off-by:
-
Cezary Rojewski authored
SND_SST_IPC and its _PCI and _ACPI variants all target sound/soc/intel/atom solution alone. SND_SST_IPC is the core component, required for PCI and ACPI based atom platforms both. _PCI and _ACPI target Merrifield/Edison and Baytrial/Cherrytrail platforms respectively. On top of that, there is an equivalent set of configs targeting the same solution: - SND_SST_ATOM_HIFI2_PLATFORM (core) - SND_SST_ATOM_HIFI2_PLATFORM_PCI - SND_SST_ATOM_HIFI2_PLATFORM_ACPI As both sets do the same job - allow for granular platform selection - remove the duplicate set and rely on SND_SST_ATOM_HIFI2_PLATOFRM_XXX configs alone. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201012095005.29859-1-cezary.rojewski@intel.comSigned-off-by:
-
Tomasz Figa authored
This is a copy of commit 5c5f1bae ("ASoC: Intel: kbl_rt5663_rt5514_max98927: Fix kabylake_ssp_fixup function") applied to the kbl_rt5663_max98927 board file. Original explanation of the change: kabylake_ssp_fixup function uses snd_soc_dpcm to identify the codecs DAIs. The HW parameters are changed based on the codec DAI of the stream. The earlier approach to get snd_soc_dpcm was using container_of() macro on snd_pcm_hw_params. The structures have been modified over time and snd_soc_dpcm does not have snd_pcm_hw_params as a reference but as a copy. This causes the current driver to crash when used. This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime holds 2 dpcm instances (one for playback and one for capture). 2 codecs on the SSP are dmic (capture) and speakers (playback). Based on the stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime. Fixes a boot crash on a HP Chromebook x2: [ 16.582225] BUG: kernel NULL pointer dereference, address: 0000000000000050 [ 16.582231] #PF: supervisor read access in kernel mode [ 16.582233] #PF: error_code(0x0000) - not-present page [ 16.582234] PGD 0 P4D 0 [ 16.582238] Oops: 0000 [#1] PREEMPT SMP PTI [ 16.582241] CPU: 0 PID: 1980 Comm: cras Tainted: G C 5.4.58 #1 [ 16.582243] Hardware name: HP Soraka/Soraka, BIOS Google_Soraka.10431.75.0 08/30/2018 [ 16.582247] RIP: 0010:kabylake_ssp_fixup+0x19/0xbb [snd_soc_kbl_rt5663_max98927] [ 16.582250] Code: c6 6f c5 80 c0 44 89 f2 31 c0 e8 3e c9 4c d6 eb de 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 f3 48 8b 46 c8 48 8b 4e d0 <48> 8b 49 10 4c 8b 78 10 4c 8b 31 4c 89 f7 48 c7 c6 4b c2 80 c0 e8 [ 16.582252] RSP: 0000:ffffaf7e81e0b958 EFLAGS: 00010282 [ 16.582254] RAX: ffffffff96f13e0d RBX: ffffaf7e81e0ba00 RCX: 0000000000000040 [ 16.582256] RDX: ffffaf7e81e0ba00 RSI: ffffaf7e81e0ba00 RDI: ffffa3b208558028 [ 16.582258] RBP: ffffaf7e81e0b970 R08: ffffa3b203b54160 R09: ffffaf7e81e0ba00 [ 16.582259] R10: 0000000000000000 R11: ffffffffc080b345 R12: ffffa3b209fb6e00 [ 16.582261] R13: ffffa3b1b1a47838 R14: ffffa3b1e6197f28 R15: ffffaf7e81e0ba00 [ 16.582263] FS: 00007eb3f25aaf80(0000) GS:ffffa3b236a00000(0000) knlGS:0000000000000000 [ 16.582265] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.582267] CR2: 0000000000000050 CR3: 0000000246bc8006 CR4: 00000000003606f0 [ 16.582269] Call Trace: [ 16.582275] snd_soc_link_be_hw_params_fixup+0x21/0x68 [ 16.582278] snd_soc_dai_hw_params+0x25/0x94 [ 16.582282] soc_pcm_hw_params+0x2d8/0x583 [ 16.582288] dpcm_be_dai_hw_params+0x172/0x29e [ 16.582291] dpcm_fe_dai_hw_params+0x9f/0x12f [ 16.582295] snd_pcm_hw_params+0x137/0x41c [ 16.582298] snd_pcm_hw_params_user+0x3c/0x71 [ 16.582301] snd_pcm_common_ioctl+0x2c6/0x565 [ 16.582304] snd_pcm_ioctl+0x32/0x36 [ 16.582307] do_vfs_ioctl+0x506/0x783 [ 16.582311] ksys_ioctl+0x58/0x83 [ 16.582313] __x64_sys_ioctl+0x1a/0x1e [ 16.582316] do_syscall_64+0x54/0x7e [ 16.582319] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 16.582322] RIP: 0033:0x7eb3f1886157 [ 16.582324] Code: 8a 66 90 48 8b 05 11 dd 2b 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 dc 2b 00 f7 d8 64 89 01 48 [ 16.582326] RSP: 002b:00007ffff7559818 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 16.582329] RAX: ffffffffffffffda RBX: 00005acc9188b140 RCX: 00007eb3f1886157 [ 16.582330] RDX: 00007ffff7559940 RSI: 00000000c2604111 RDI: 000000000000001e [ 16.582332] RBP: 00007ffff7559840 R08: 0000000000000004 R09: 0000000000000000 [ 16.582333] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000bb80 [ 16.582335] R13: 00005acc91702e80 R14: 00007ffff7559940 R15: 00005acc91702e80 [ 16.582337] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg uinput hid_google_hammer snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_soc_dmic snd_soc_skl_ssp_clk snd_soc_skl snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core ipu3_cio2 ipu3_imgu(C) videobuf2_v4l2 videobuf2_common videobuf2_dma_sg videobuf2_memops snd_soc_rt5663 snd_soc_max98927 snd_soc_rl6231 ov5670 ov13858 acpi_als v4l2_fwnode dw9714 fuse xt_MASQUERADE iio_trig_sysfs cros_ec_light_prox cros_ec_sensors cros_ec_sensors_core cros_ec_sensors_ring industrialio_triggered_buffer kfifo_buf industrialio cros_ec_sensorhub cdc_ether usbnet btusb btrtl btintel btbcm bluetooth ecdh_generic ecc lzo_rle lzo_compress iwlmvm zram iwl7000_mac80211 r8152 mii iwlwifi cfg80211 joydev [ 16.584243] gsmi: Log Shutdown Reason 0x03 [ 16.584246] CR2: 0000000000000050 [ 16.584248] ---[ end trace c8511d090c11edff ]--- Suggested-by:
Łukasz Majczak <lmajczak@google.com> Fixes: 2e5894d7 ("ASoC: pcm: Add support for DAI multicodec") Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Acked-by:
-
- 09 Oct, 2020 2 commits
-
-
Mark Brown authored
We intentionally do not return an error if we get a permanent failure from dma_request_chan() in order to support systems which have TX only or RX only channels. Add a comment documenting this. Reported-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
-
Codrin Ciubotariu authored
Do not include the 'TX' in the stream name since it's obvious for playback. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20201009123527.2770629-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
- 08 Oct, 2020 16 commits
-
-
Mark Brown authored
Widening of the supported rate range in the STM32 DFSDM driver. The rates were previously limited to 8kHz, 16kHz and 32kHz. Allow rate capture in the whole range 8kHz-48kHz as there is no hardware limitation to support it. Actual sample resolution is dependent on audio rate and DFSDM configuration. Add a trace to allow simple check of sample resolution. Olivier Moysan (2): ASoC: stm32: dfsdm: change rate limits ASoC: stm32: dfsdm: add actual resolution trace drivers/iio/adc/stm32-dfsdm-adc.c | 4 ++++ drivers/iio/adc/stm32-dfsdm.h | 2 ++ sound/soc/stm/stm32_adfsdm.c | 8 +++----- 3 files changed, 9 insertions(+), 5 deletions(-) -- 2.17.1
-
Mark Brown authored
Merge series "Qualcomm's lpass-hdmi ASoC driver to support audio over dp port" from Srinivasa Rao Mandadapu <srivasam@codeaurora.org>: These patches are to support audio over DP port on Qualcomm's SC7180 LPASS Asoc. It includes machine driver, cpu driver, platform driver updates for HDMI path support, device tree documention, lpass variant structure optimization and configuration changes. These patches depends on the DP patch series https://patchwork.kernel.org/project/dri-devel/list/?series=332029 https://lore.kernel.org/patchwork/project/lkml/list/?series=464856 changes since V10: -- Moved hdmi regmap functions from lpass-hdmi.c to lpass-cpu.c -- Moved QCOM_REGMAP_FIELD_ALLOC macro from lpass-hdmi.c to lpass.h changes since V9: -- Removed unused structures lpass_hdmi.h changes since V8: -- Removed redundant structure wrapper for reg map field memebrs -- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true and others as false. changes since V7: -- Fixed typo errors -- Created Separate patch for buffer size change changes since V6: -- Removed compile time define flag, which used for enabling HDMI code, based on corresponding config param is included. -- Updated reg map alloc API with reg map bulk API. -- Removed unnecessary line splits changes since V5: -- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields. -- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c -- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro Changes Since v4: -- Updated with single compatible node for both I2S and HDMI. Changes Since v3: -- Removed id in lpass variant structure and used snd_soc_dai_driver id. Changes Since v2: -- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased. Changes Since v1: -- Commit messages are updated -- Addressed Rob Herring review comments V Sujith Kumar Reddy (7): ASoC: Add sc7180-lpass binding header hdmi define ASoC: dt-bindings: Add dt binding for lpass hdmi Asoc:qcom:lpass-cpu:Update dts property read API Asoc: qcom: lpass:Update lpaif_dmactl members order ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: sc7180: Add support for audio over DP .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 ++-- include/dt-bindings/sound/sc7180-lpass.h | 1 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 4 +- sound/soc/qcom/lpass-cpu.c | 249 ++++++++++++- sound/soc/qcom/lpass-hdmi.c | 258 ++++++++++++++ sound/soc/qcom/lpass-hdmi.h | 102 ++++++ sound/soc/qcom/lpass-ipq806x.c | 4 +- sound/soc/qcom/lpass-lpaif-reg.h | 49 ++- sound/soc/qcom/lpass-platform.c | 395 +++++++++++++++++---- sound/soc/qcom/lpass-sc7180.c | 116 +++++- sound/soc/qcom/lpass.h | 124 ++++++- 13 files changed, 1240 insertions(+), 143 deletions(-) create mode 100644 sound/soc/qcom/lpass-hdmi.c create mode 100644 sound/soc/qcom/lpass-hdmi.h -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
-
Peter Ujfalusi authored
At this point mcasp->dev is not initialized and we would have NULL pointer dereference if we would have failed to get the mem memory resource by name. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20201008085400.19944-1-peter.ujfalusi@ti.comSigned-off-by:
-
Dan Murphy authored
Introduce the Texas Instruments TAS2764 amplifier driver with I/V sense for loud speaker applications. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.comSigned-off-by:
-
Dan Murphy authored
Add the binding for the TAS2764 Smart Amplifier. Signed-off-by:
-
Cezary Rojewski authored
catpt selects DW_DMAC_CORE which requires DMADEVICES. Fix unmet direct dependencies warning by updating driver's depends-on list. Fixes: 6cbfa11d ("ASoC: Intel: Select catpt and deprecate haswell") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Cezary Rojewski authored
module_is_live() is available only when CONFIG_MODULES is enabled. Replace its usage with try_module_get() which is present regardless of said config's status. Fixes: 7a10b66a ("ASoC: Intel: catpt: Device driver lifecycle") Reported-by:
-
Olivier Moysan authored
Add a trace to report actual resolution of audio samples. Signed-off-by:
-
Olivier Moysan authored
The DFSDM can support a larger rate range than currently supported in driver. Increase rate upper limit to 48kHz and allow all rates in the range 8kHz to 48kHz. Signed-off-by:
-
V Sujith Kumar Reddy authored
Add support for audio playback over DP in lpass sc7180 platform driver. Update lpass_variant structure for hdmi data configuaration. Signed-off-by:
V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by:
Srinivasa Rao <srivasam@codeaurora.org> Tested-by:
-
V Sujith Kumar Reddy authored
Increase buffer size to support audio over DP. Signed-off-by:
-
V Sujith Kumar Reddy authored
Upadate lpass cpu and platform driver to support audio over dp. Also add lpass-hdmi.c and lpass-hdmi.h. Signed-off-by:
-
V Sujith Kumar Reddy authored
Update the lpaif_dmactl struct members order to match HDMI reg map members sequence. Separate Interface reg map as it is used for I2S control but not for HDMI control, to make use of bulk API, which makes code more readable. Signed-off-by:
-
V Sujith Kumar Reddy authored
Update dts property read API call with platform get property by name, as it make code more readable and avoid conflicts when array of properties to be used. Signed-off-by:
-
V Sujith Kumar Reddy authored
Adds bindings for lpass hdmi interface which can support audio path over dp. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
V Sujith Kumar Reddy authored
Add header defining hdmi dai-id for SC7180 lpass soc in dt bindings. Signed-off-by:
-
- 07 Oct, 2020 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 06 Oct, 2020 10 commits
-
-
Mark Brown authored
Linux 5.9-rc5
-
Mark Brown authored
Merge series "ASoC: Intel: Remove obsolete solutions and components" from Cezary Rojewski <cezary.rojewski@intel.com>: Follow up to catpt series as mentioned in: [PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point https://www.spinics.net/lists/alsa-devel/msg116440.html As catpt is a direct replacement to sound/soc/intel/haswell, it leaves a lot of code redudant. The second legacy solution - baytrail - is deprecated for a long time by sound/soc/intel/atom with SOF flavor available too. This series addresses the redudancy and removes obsolete code. Along with the legacy solutions, all orphaned components are removed too. As a consequence, further cleanups are unlocked: sound/soc/intel/skylake becomes the sole user of processing code found in sound/soc/intel/common. Those are not part of this series. Changes in v2: - just a rebase so patch 04/13 applies cleanly - left the tags as no actual changes done in between Cezary Rojewski (13): ASoC: Intel: Remove haswell solution ASoC: Intel: Remove max98090 support for baytrail solution ASoC: Intel: Remove rt5640 support for baytrail solution ASoC: Intel: Remove baytrail solution ASoC: Intel: Remove SST ACPI component ASoC: Intel: Remove SST firmware components ASoC: Intel: Skylake: Unassign ram_read and read_write ops ASoC: Intel: Remove unused DSP operations ASoC: Intel: Remove unused DSP interface fields ASoC: Intel: Remove SST-legacy specific constants ASoC: Intel: Make atom components independent of sst-dsp ASoC: Intel: Remove sst_pdata structure ASoC: Intel: Remove sst_dsp_get_thread_context include/sound/soc-acpi-intel-match.h | 1 - include/trace/events/hswadsp.h | 385 --- sound/soc/intel/Kconfig | 26 - sound/soc/intel/Makefile | 1 - sound/soc/intel/atom/sst/sst.c | 1 - sound/soc/intel/atom/sst/sst.h | 7 + sound/soc/intel/atom/sst/sst_acpi.c | 1 - sound/soc/intel/atom/sst/sst_drv_interface.c | 3 - sound/soc/intel/atom/sst/sst_ipc.c | 1 - sound/soc/intel/atom/sst/sst_loader.c | 1 - sound/soc/intel/atom/sst/sst_pvt.c | 1 - sound/soc/intel/atom/sst/sst_stream.c | 1 - sound/soc/intel/baytrail/Makefile | 5 - sound/soc/intel/baytrail/sst-baytrail-dsp.c | 358 --- sound/soc/intel/baytrail/sst-baytrail-ipc.c | 772 ------ sound/soc/intel/baytrail/sst-baytrail-ipc.h | 64 - sound/soc/intel/baytrail/sst-baytrail-pcm.c | 459 ---- sound/soc/intel/boards/Kconfig | 25 - sound/soc/intel/boards/Makefile | 4 - sound/soc/intel/boards/byt-max98090.c | 182 -- sound/soc/intel/boards/byt-rt5640.c | 224 -- sound/soc/intel/boards/bytcht_es8316.c | 1 - sound/soc/intel/boards/bytcr_rt5640.c | 1 - sound/soc/intel/common/Makefile | 4 - .../intel/common/soc-acpi-intel-byt-match.c | 15 - sound/soc/intel/common/sst-acpi.c | 236 -- sound/soc/intel/common/sst-dsp-priv.h | 284 +-- sound/soc/intel/common/sst-dsp.c | 162 -- sound/soc/intel/common/sst-dsp.h | 222 -- sound/soc/intel/common/sst-firmware.c | 1273 ---------- sound/soc/intel/common/sst-ipc.c | 27 - sound/soc/intel/common/sst-ipc.h | 3 - sound/soc/intel/haswell/Makefile | 5 - sound/soc/intel/haswell/sst-haswell-dsp.c | 705 ------ sound/soc/intel/haswell/sst-haswell-ipc.c | 2222 ----------------- sound/soc/intel/haswell/sst-haswell-ipc.h | 527 ---- sound/soc/intel/haswell/sst-haswell-pcm.c | 1369 ---------- sound/soc/intel/skylake/bxt-sst.c | 2 - sound/soc/intel/skylake/cnl-sst.c | 4 +- sound/soc/intel/skylake/skl-sst-dsp.c | 2 +- sound/soc/intel/skylake/skl-sst-ipc.c | 2 +- sound/soc/intel/skylake/skl-sst.c | 2 - 42 files changed, 11 insertions(+), 9579 deletions(-) delete mode 100644 include/trace/events/hswadsp.h delete mode 100644 sound/soc/intel/baytrail/Makefile delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-dsp.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.h delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-pcm.c delete mode 100644 sound/soc/intel/boards/byt-max98090.c delete mode 100644 sound/soc/intel/boards/byt-rt5640.c delete mode 100644 sound/soc/intel/common/sst-acpi.c delete mode 100644 sound/soc/intel/common/sst-firmware.c delete mode 100644 sound/soc/intel/haswell/Makefile delete mode 100644 sound/soc/intel/haswell/sst-haswell-dsp.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.h delete mode 100644 sound/soc/intel/haswell/sst-haswell-pcm.c -- 2.17.1
-
Alex Dewar authored
Commit 9c34d023 ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split"), in rearranging various files, also replaced calls to platform_get_resource_by_name() + devm_ioremap_resource() with a single call to devm_platform_ioremap_resource_byname(). However, the struct resource is needed as we access its members so at present a null pointer is dereferenced. Fix by doing things the old way. Fixes: 9c34d023 ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split") Signed-off-by:
Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20201004102535.325547-1-alex.dewar90@gmail.comSigned-off-by:
-
Cezary Rojewski authored
While sst_dsp_get_thread_context() is declared as solution-agnostic, it is only used by /skylake/ solution. Majority of thread_context field usages are direct accesses. Improve code cohesiveness and convert to single usage model. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Liam Girdwood <liam.r.girdwood@intel.com> Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
struct sst_pdata is unused among remaining /sound/soc/intel solution so remove it. Signed-off-by:
-
Cezary Rojewski authored
With sound/soc/intel/haswell and /baytrail gone, registers left within sst-dsp header are atom-specific. Relocate these to atom internal header to make atom truely independent of sound/soc/common processing code. Signed-off-by:
-
Cezary Rojewski authored
As sound/soc/intel/haswell and /baytrail are no more, all SST-legacy specific constants and registers are redundant so remove them. Signed-off-by:
-
Cezary Rojewski authored
With redundant DSP operations removed, several fields for structures: sst_ops, sst_addr and sst_dsp become obsolete. Remove them too. Signed-off-by:
-
Cezary Rojewski authored
sound/soc/intel/common/ declares several helper functions for /intel/ solutions. In practice, differences between these - /haswell/ and /skylake/ especially - led to many of the helpers being used only by a single solution. As /skylake/ makes no use of these and /haswell/ and /baytail/ are no more, remove the unused functions. Signed-off-by:
-
Cezary Rojewski authored
Skylake driver makes no use of ram_read or ram_write operation so remove the assignments. This prepares sound/soc/common/sst-dsp* for following removal of unused DSP operations. Signed-off-by:
-
