- 27 Oct, 2015 17 commits
-
-
Cristina Moraru authored
Replace single variable sscanf with specialized function kstrtoint at the suggestion of checkpatch.pl, to fix 'WARNING: Prefer kstrto<type> to single variable sscanf' Signed-off-by:
Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Rapoport authored
The OBD_PAGE_ALLOC/FREE and related macros are not used and can be removed Signed-off-by:
Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by:
-
Mike Rapoport authored
Use alloc_page and __free_page instead Signed-off-by:
-
Cristina Moraru authored
Error stored in rc was never reported, so directly return it here. Signed-off-by:
-
Shraddha Barke authored
Remove the header file obd_cache.h since it is not needed Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Shraddha Barke authored
Since sptlrpc_rule_set_expand is static, export symbol is not needed Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove the export symbol for static function. The semantic patch used to find this is: // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Ian Abbott authored
`comedi_nsamples_left(s, nsamples)` returns the number of samples remaining to complete an asynchronous command or the passed in `nsamples`, whichever is lower. However, it goes wrong in the extreme case of setting the `nsamples` parameter to `UINT_MAX` when the number of conversions per "scan" (`s->async->cmd.scan_end_arg`) is 1. It uses `comedi_nscans_remaining(s, nscans)` to determine the number of scans remaining, or the parameter `nscans`, whichever is lower. To determine the parameter `nscans`, it divides `nsamples` by the number of conversions per scan and adds 1. The addition of 1 is to avoid setting the parameter `nscans` to 0, as `comedi_nscans_remaining(s, nscans)` treats that value specially. However in the extreme case where `nsamples` is `UINT_MAX` and the number of samples per scan is 1, the addition of 1 to `nscans` overflows, producing the unwanted 0. Fix it by refactoring new a function `__comedi_nscans_remaining(s, nscans)` out of `comedi_nscans_remaining(s, nscans)`. The new function does everything except the special handling when `nscans` is 0. Change `comedi_nsamples_remaining()` to call the new function without adding 1 to `nscans` to avoid the overflow. This overflow bug doesn't affect any of the current COMEDI drivers. I stumbled across it while changing to one of the drivers. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Shivani Bhardwaj authored
Parentheses around some arguments and expressions are not required and should be removed. Signed-off-by:
Shivani Bhardwaj <shivanib134@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
Remove the function get_current_channel() and replace its calls by get_current_channel_802_11n() as the former function's definition involves only returning the value of latter function. Semantic patch used to find out the issue: @@ identifier f,g; @@ *f(...) { return g(...); } Signed-off-by: -
Shivani Bhardwaj authored
Replace the wrapper functions get_address1(), get_address2() and get_address3() with the standard kernel function ether_addr_copy(). Semantic patch used to identify the issue: @@ identifier f,g; @@ *f(...) { g(...); } Signed-off-by: -
Luis de Bethencourt authored
The driver is using -1 instead of the -ENOMEM defined macro to specify that a buffer allocation failed. Fixes smatch warning and similars: drivers/staging/wilc1000/host_interface.c:1757 Handle_Key() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Chaehyun Lim authored
This patch replaces host_int_set_WEPDefaultKeyID with host_int_set_wep_default_key to avoid camelcase. Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
This patch changes second parameter of host_int_set_WEPDefaultKeyID from u8Index to index to avoid camelcase. Signed-off-by:
-
Chaehyun Lim authored
This patch changes struct host_if_drv of host_int_set_WEPDefaultKeyID function declaration from hWFIDrv to hif_drv in host_interface.h With this change, first parameter name of this function declaration and definition has same name as hif_drv. Signed-off-by:
-
Chaehyun Lim authored
This patch changes return type of host_int_set_WEPDefaultKeyID from s32 to int. The result variable gets return value from wilc_mq_send that has return type of int. It should be changed return type int as well as data type of result variable. Signed-off-by:
-
Greg Kroah-Hartman authored
We want the other staging patches in this branch as well. Signed-off-by:
-
- 25 Oct, 2015 23 commits
-
-
Punit Vara authored
This patch is to the host_interface.c file that fixes up following warning reported by coccicheck: WARNING: Comparison to bool Boolean tests do not need explicit comparison to true or false Signed-off-by:
Punit Vara <punitvara@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Deletes the jump to a label on the next line when the label isn't used anywhere else. The semantic patch used to find this is: // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
Replace all instances of bit shifting on 1 with the BIT(x) macro. In addition, convert other non-1 shift operations with the equivalent BIT(x) macro for uniformity. Issue pointed out by checkpatch. CHECK: Prefer using the BIT macro Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
Use 'usleep_range' instead of 'udelay' to elapse time. For spinand_reset, define the upper limit by a factor of 2 to keep the wait short while still allowing a "good enough" range for wakeup. Define the range 250us - 1ms for spinand_cmdfunc to provide enough leeway before issuing spinand_reset. Checkpatch found this issue. CHECK: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by:
-
Muhammad Falak R Wani authored
Use of the timer API function setup_timer instead of init_timer, removing the structure field assignments, and make the codeflow more readable. The simplified sematic patch used is :- <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. The simplified semantic patch used is :- <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
-
Alison Schofield authored
Remove extern declaration and add include of header file to get same. Addresses checkpatch.pl: WARNING: externs should be avoided in .c files Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Alison Schofield authored
Replace explicit NULL comparison with ! operator to simplify code. Addresses checkpatch.pl: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by:
-
Alison Schofield authored
Reworked comments per kernel coding style to improve readability. Corrects checkpatch.pl: WARNING: Block comments use * on subsequent lines WARNING: line over 80 characters Signed-off-by:
-
Burcin Akalin authored
Remove multiple blank lines. Problem found using checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
Burcin Akalin <brcnakalin@gmail.com> Signed-off-by:
-
Burcin Akalin authored
Remove multiple assignments by factorizing them.Problem found using checkpatch.pl CHECK: multiple assignments should be avoided Signed-off-by:
-
Amitoj Kaur Chawla authored
This patch removes unnecessary braces around if-else single statement blocks and unnecessary tab space aligning Tool used is uncrustify. Signed-off-by:
-
Shraddha Barke authored
Introduce the use of function put_unaligned_le32. A simplified version of Coccinelle semantic patch used - @@ identifier tmp; expression ptr; expression y,e; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ...+> ? tmp = e @@ type T; identifier tmp; @@ - T tmp; ...when != tmp Signed-off-by:
-
Dennis Menschel authored
This patch fixes some internal voltage settings for the C-Berry28 display. The original example source files for the C-Berry28 as provided by its vendor admatec contained six issues where a command parameter's value didn't match its corresponding comment. I've informed admatec about these discrepancies on 2015-08-25. In the meantime, I've assumed the comments to be more reliable than the code, and thus have used these values to write the initial C-Berry28 driver. After having received a reply from admatec on 2015-10-16 that the issues have been fixed in their example code, it has turned out that for the voltages VCOM and AVDD, the code was indeed correct, but the comments were wrong. This patch is meant to fix these two pending mistakes. Signed-off-by:
Dennis Menschel <menschel-d@posteo.de> Signed-off-by:
-
Dennis Menschel authored
This patch converts the default init sequence of the ST7789V display controller into an init function, as init sequences are considered deprecated by the maintainers of fbtft. Signed-off-by:
-
Dennis Menschel authored
This patch removes the function set_addr_win() from fb_st7789v.c, as its definition is redundant to the default implementation fbtft_set_addr_win() which can be found in fbtft-core.c. Signed-off-by:
-
Dennis Menschel authored
This patch makes use of the standard MIPI Display Command Set to remove redundant entries from the command enum of the ST7789V display controller and also some of the magic constants found in the init sequence of the C-Berry28 display. Signed-off-by:
-
Alison Schofield authored
Add local variable scanned_queue to rtw_createbss_cmd23a_callback() and use it (5x) to simplify references. Addresses checkpatch.pl WARNING: line over 80 characters Signed-off-by:
-
Alison Schofield authored
Move constant to right of comparison test to improve readability. Addresses checkpatch.pl: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by:
-
Alison Schofield authored
Replace printk() with netdev_err() for uniform error reporting. Issue found by checkpatch. Signed-off-by:
-
