Pull ARM SoC fixes from Arnd Bergmann:
 "There are a number of SoC bugfixes that came in since the merge
  window, and more of them are already pending.

  This batch includes:

   - A boot time regression fix for davinci that triggered on
     multi_v5_defconfig when booting any platform

   - Defconfig updates to address removed features, changed symbol names
     or dependencies, for gemini, ux500, and pxa

   - Email address changes for Krzysztof Kozlowski

   - Build warning fixes for ep93xx and iop32x

   - Devicetree warning fixes across many platforms

   - Minor bugfixes for the reset controller, memory controller and SCMI
     firmware subsystems plus the versatile-express board"

* tag 'soc-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: config: Update Gemini defconfig
  arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values
  ARM: dts: align SPI NOR node name with dtschema
  ARM: dts: Fix more boolean properties with values
  arm/arm64: dts: qcom: Fix boolean properties with values
  arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes
  arm: dts: imx: Fix boolean properties with values
  arm64: dts: tegra: Fix boolean properties with values
  arm: dts: at91: Fix boolean properties with values
  arm: configs: imote2: Drop defconfig as board support dropped.
  ep93xx: clock: Don't use plain integer as NULL pointer
  ep93xx: clock: Fix UAF in ep93xx_clk_register_gate()
  ARM: vexpress/spc: Fix all the kernel-doc build warnings
  ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
  ARM: config: u8500: Re-enable AB8500 battery charging
  ARM: config: u8500: Add some common hardware
  memory: fsl_ifc: populate child nodes of buses and mfd devices
  ARM: config: Refresh U8500 defconfig
  firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
  firmware: arm_scmi: Replace zero-length array with flexible-array member
  ...

Pull random number generator fixes from Jason Donenfeld:

 - Per your suggestion, random reads now won't fail if there's a page
   fault after some non-zero amount of data has been read, which makes
   the behavior consistent with all other reads in the kernel.

 - Rather than an inconsistent mix of random_get_entropy() returning an
   unsigned long or a cycles_t, now it just returns an unsigned long.

 - A memcpy() was replaced with an memmove(), because the addresses are
   sometimes overlapping. In practice the destination is always before
   the source, so not really an issue, but better to be correct than
   not.

* tag 'random-5.18-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: use memmove instead of memcpy for remaining 32 bytes
  random: make random_get_entropy() return an unsigned long
  random: allow partial reads if later user copies fail

Pull SCSI fixes from James Bottomley:
 "13 fixes, all in drivers.

  The most extensive changes are in the iscsi series (affecting drivers
  qedi, cxgbi and bnx2i), the next most is scsi_debug, but that's just a
  simple revert and then minor updates to pm80xx"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer
  scsi: qedi: Fix failed disconnect handling
  scsi: iscsi: Fix NOP handling during conn recovery
  scsi: iscsi: Merge suspend fields
  scsi: iscsi: Fix unbound endpoint error handling
  scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
  scsi: iscsi: Fix endpoint reuse regression
  scsi: iscsi: Release endpoint ID when its freed
  scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  scsi: iscsi: Move iscsi_ep_disconnect()
  scsi: pm80xx: Enable upper inbound, outbound queues
  scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
  Revert "scsi: scsi_debug: Address races following module load"

Pull dma-mapping fix from Christoph Hellwig:

 - avoid a double memory copy for swiotlb (Chao Gao)

* tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: avoid redundant memory sync for swiotlb

In order to immediately overwrite the old key on the stack, before
servicing a userspace request for bytes, we use the remaining 32 bytes
of block 0 as the key. This means moving indices 8,9,a,b,c,d,e,f ->
4,5,6,7,8,9,a,b. Since 4 < 8, for the kernel implementations of
memcpy(), this doesn't actually appear to be a problem in practice. But
relying on that characteristic seems a bit brittle. So let's change that
to a proper memmove(), which is the by-the-books way of handling
overlapping memory copies.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: MAINTAINERS, binfmt, and
  mm (tmpfs, secretmem, kasan, kfence, pagealloc, zram, compaction,
  hugetlb, vmalloc, and kmemleak)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
  mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcore
  revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"
  revert "fs/binfmt_elf: fix PT_LOAD p_align values for loaders"
  hugetlb: do not demote poisoned hugetlb pages
  mm: compaction: fix compiler warning when CONFIG_COMPACTION=n
  mm: fix unexpected zeroed page mapping with zram swap
  mm, page_alloc: fix build_zonerefs_node()
  mm, kfence: support kmem_dump_obj() for KFENCE objects
  kasan: fix hw tags enablement when KUNIT tests are disabled
  irq_work: use kasan_record_aux_stack_noalloc() record callstack
  mm/secretmem: fix panic when growing a memfd_secret
  tmpfs: fix regressions from wider use of ZERO_PAGE
  MAINTAINERS: Broadcom internal lists aren't maintainers

Merge tag 'for-5.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix memory corruption in DM integrity target when tag_size is less
   than digest size.

 - Fix DM multipath's historical-service-time path selector to not use
   sched_clock() and ktime_get_ns(); only use ktime_get_ns().

 - Fix dm_io->orig_bio NULL pointer dereference in dm_zone_map_bio() due
   to 5.18 changes that overlooked DM zone's use of ->orig_bio

 - Fix for regression that broke the use of dm_accept_partial_bio() for
   "abnormal" IO (e.g. WRITE ZEROES) that does not need duplicate bios

 - Fix DM's issuing of empty flush bio so that it's size is 0.

* tag 'for-5.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix bio length of empty flush
  dm: allow dm_accept_partial_bio() for dm_io without duplicate bios
  dm zone: fix NULL pointer dereference in dm_zone_map_bio
  dm mpath: only use ktime_get_ns() in historical selector
  dm integrity: fix memory corruption when tag_size is less than digest size

The kmemleak_*_phys() apis do not check the address for lowmem's min
boundary, while the caller may pass an address below lowmem, which will
trigger an oops:

  # echo scan > /sys/kernel/debug/kmemleak
  Unable to handle kernel paging request at virtual address ff5fffffffe00000
  Oops [#1]
  Modules linked in:
  CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33
  Hardware name: riscv-virtio,qemu (DT)
  epc : scan_block+0x74/0x15c
   ra : scan_block+0x72/0x15c
  epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30
   gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200
   t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90
   s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000
   a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001
   a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005
   s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90
   s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0
   s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000
   s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f
   t5 : 0000000000000001 t6 : 0000000000000000
  status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d
    scan_gray_list+0x12e/0x1a6
    kmemleak_scan+0x2aa/0x57e
    kmemleak_write+0x32a/0x40c
    full_proxy_write+0x56/0x82
    vfs_write+0xa6/0x2a6
    ksys_write+0x6c/0xe2
    sys_write+0x22/0x2a
    ret_from_syscall+0x0/0x2

The callers may not quite know the actual address they pass(e.g. from
devicetree).  So the kmemleak_*_phys() apis should guarantee the address
they finally use is in lowmem range, so check the address for lowmem's
min boundary.

Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.comSigned-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3ee48b6a ("mm, x86: Saving vmcore with non-lazy freeing of
vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to
lazy_max_pages() + 1, ensuring that any future vunmaps() immediately
purge the vmap areas instead of doing it lazily.

Commit 690467c8 ("mm/vmalloc: Move draining areas out of caller
context") moved the purging from the vunmap() caller to a worker thread.
Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin
(possibly forever).  For example, consider the following scenario:

 1. Thread reads from /proc/vmcore. This eventually calls
    __copy_oldmem_page() -> set_iounmap_nonlazy(), which sets
    vmap_lazy_nr to lazy_max_pages() + 1.

 2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2
    pages (one page plus the guard page) to the purge list and
    vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the
    drain_vmap_work is scheduled.

 3. Thread returns from the kernel and is scheduled out.

 4. Worker thread is scheduled in and calls drain_vmap_area_work(). It
    frees the 2 pages on the purge list. vmap_lazy_nr is now
    lazy_max_pages() + 1.

 5. This is still over the threshold, so it tries to purge areas again,
    but doesn't find anything.

 6. Repeat 5.

If the system is running with only one CPU (which is typicial for kdump)
and preemption is disabled, then this will never make forward progress:
there aren't any more pages to purge, so it hangs.  If there is more
than one CPU or preemption is enabled, then the worker thread will spin
forever in the background.  (Note that if there were already pages to be
purged at the time that set_iounmap_nonlazy() was called, this bug is
avoided.)

This can be reproduced with anything that reads from /proc/vmcore
multiple times.  E.g., vmcore-dmesg /proc/vmcore.

It turns out that improvements to vmap() over the years have obsoleted
the need for this "optimization".  I benchmarked `dd if=/proc/vmcore
of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore.
The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and
5.18-rc1 with set_iounmap_nonlazy() removed entirely:

    |5.17  |5.18+fix|5.18+removal
  4k|40.86s|  40.09s|      26.73s
  1M|24.47s|  23.98s|      21.84s

The removal was the fastest (by a wide margin with 4k reads).  This
patch removes set_iounmap_nonlazy().

Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com
Fixes: 690467c8  ("mm/vmalloc: Move draining areas out of caller context")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Despite Mike's attempted fix (925346c1), regressions reports
continue:

  https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/
  https://bugzilla.kernel.org/show_bug.cgi?id=215720
  https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info

So revert this patch.

Fixes: 9630f0d6 ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 925346c1 ("fs/binfmt_elf: fix PT_LOAD p_align values for
loaders") was an attempt to fix regressions due to 9630f0d6
("fs/binfmt_elf: use PT_LOAD p_align values for static PIE").

But regressionss continue to be reported:

  https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/
  https://bugzilla.kernel.org/show_bug.cgi?id=215720
  https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info

This patch reverts the fix, so the original can also be reverted.

Fixes: 925346c1 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is possible for poisoned hugetlb pages to reside on the free lists.
The huge page allocation routines which dequeue entries from the free
lists make a point of avoiding poisoned pages.  There is no such check
and avoidance in the demote code path.

If a hugetlb page on the is on a free list, poison will only be set in
the head page rather then the page with the actual error.  If such a
page is demoted, then the poison flag may follow the wrong page.  A page
without error could have poison set, and a page with poison could not
have the flag set.

Check for poison before attempting to demote a hugetlb page.  Also,
return -EBUSY to the caller if only poisoned pages are on the free list.

Link: https://lkml.kernel.org/r/20220307215707.50916-1-mike.kravetz@oracle.com
Fixes: 8531fc6f ("hugetlb: add hugetlb demote page support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The below warning is reported when CONFIG_COMPACTION=n:

   mm/compaction.c:56:27: warning: 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' defined but not used [-Wunused-const-variable=]
      56 | static const unsigned int HPAGE_FRAG_CHECK_INTERVAL_MSEC = 500;
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by moving 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' under
CONFIG_COMPACTION defconfig.

Also since this is just a 'static const int' type, use #define for it.

Link: https://lkml.kernel.org/r/1647608518-20924-1-git-send-email-quic_charante@quicinc.comSigned-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.

      CPU A                        CPU B

  do_swap_page                do_swap_page
  SWP_SYNCHRONOUS_IO path     SWP_SYNCHRONOUS_IO path
  swap_readpage valid data
    swap_slot_free_notify
      delete zram entry
                              swap_readpage zeroed(invalid) data
                              pte_lock
                              map the *zero data* to userspace
                              pte_unlock
  pte_lock
  if (!pte_same)
    goto out_nomap;
  pte_unlock
  return and next refault will
  read zeroed data

The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device.  In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock.  Thus, this patch gets rid of the swap_slot_free_notify
function.  With this patch, CPU A will see correct data.

      CPU A                        CPU B

  do_swap_page                do_swap_page
  SWP_SYNCHRONOUS_IO path     SWP_SYNCHRONOUS_IO path
                              swap_readpage original data
                              pte_lock
                              map the original data
                              swap_free
                                swap_range_free
                                  bd_disk->fops->swap_slot_free_notify
  swap_readpage read zeroed data
                              pte_unlock
  pte_lock
  if (!pte_same)
    goto out_nomap;
  pte_unlock
  return
  on next refault will see mapped data by CPU B

The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space.  However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly.

Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com
Fixes: 0bcac06f ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 6aa303de ("mm, vmscan: only allocate and reclaim from
zones with pages managed by the buddy allocator") only zones with free
memory are included in a built zonelist.  This is problematic when e.g.
all memory of a zone has been ballooned out when zonelists are being
rebuilt.

The decision whether to rebuild the zonelists when onlining new memory
is done based on populated_zone() returning 0 for the zone the memory
will be added to.  The new zone is added to the zonelists only, if it
has free memory pages (managed_zone() returns a non-zero value) after
the memory has been onlined.  This implies, that onlining memory will
always free the added pages to the allocator immediately, but this is
not true in all cases: when e.g. running as a Xen guest the onlined new
memory will be added only to the ballooned memory list, it will be freed
only when the guest is being ballooned up afterwards.

Another problem with using managed_zone() for the decision whether a
zone is being added to the zonelists is, that a zone with all memory
used will in fact be removed from all zonelists in case the zonelists
happen to be rebuilt.

Use populated_zone() when building a zonelist as it has been done before
that commit.

There was a report that QubesOS (based on Xen) is hitting this problem.
Xen has switched to use the zone device functionality in kernel 5.9 and
QubesOS wants to use memory hotplugging for guests in order to be able
to start a guest with minimal memory and expand it as needed.  This was
the report leading to the patch.

Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com
Fixes: 6aa303de ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been
producing garbage data due to the object not actually being maintained
by SLAB or SLUB.

Fix this by implementing __kfence_obj_info() that copies relevant
information to struct kmem_obj_info when the object was allocated by
KFENCE; this is called by a common kmem_obj_info(), which also calls the
slab/slub/slob specific variant now called __kmem_obj_info().

For completeness, kmem_dump_obj() now displays if the object was
allocated by KFENCE.

Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com
Fixes: b89fb5ef ("mm, kfence: insert KFENCE hooks for SLUB")
Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>	[slab]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kasan enables hw tags via kasan_enable_tagging() which based on the mode
passed via kernel command line selects the correct hw backend.
kasan_enable_tagging() is meant to be invoked indirectly via the cpu
features framework of the architectures that support these backends.
Currently the invocation of this function is guarded by
CONFIG_KASAN_KUNIT_TEST which allows the enablement of the correct backend
only when KUNIT tests are enabled in the kernel.

This inconsistency was introduced in commit:

  ed6d7444 ("kasan: test: support async (again) and asymm modes for HW_TAGS")

... and prevents to enable MTE on arm64 when KUNIT tests for kasan hw_tags are
disabled.

Fix the issue making sure that the CONFIG_KASAN_KUNIT_TEST guard does not
prevent the correct invocation of kasan_enable_tagging().

Link: https://lkml.kernel.org/r/20220408124323.10028-1-vincenzo.frascino@arm.com
Fixes: ed6d7444 ("kasan: test: support async (again) and asymm modes for HW_TAGS")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On PREEMPT_RT kernel and KASAN is enabled.  the kasan_record_aux_stack()
may call alloc_pages(), and the rt-spinlock will be acquired, if currently
in atomic context, will trigger warning:

  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd
  Preemption disabled at:
  [<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0
  CPU: 3 PID: 239 Comm: bootlogd Tainted: G        W 5.17.1-rt17-yocto-preempt-rt+ #105
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  Call Trace:
     __might_resched.cold+0x13b/0x173
     rt_spin_lock+0x5b/0xf0
     get_page_from_freelist+0x20c/0x1610
     __alloc_pages+0x25e/0x5e0
     __stack_depot_save+0x3c0/0x4a0
     kasan_save_stack+0x3a/0x50
     __kasan_record_aux_stack+0xb6/0xc0
     kasan_record_aux_stack+0xe/0x10
     irq_work_queue_on+0x6a/0x1c0
     pull_rt_task+0x631/0x6b0
     do_balance_callbacks+0x56/0x80
     __balance_callbacks+0x63/0x90
     rt_mutex_setprio+0x349/0x880
     rt_mutex_slowunlock+0x22a/0x4e0
     rt_spin_unlock+0x49/0x80
     uart_write+0x186/0x2b0
     do_output_char+0x2e9/0x3a0
     n_tty_write+0x306/0x800
     file_tty_write.isra.0+0x2af/0x450
     tty_write+0x22/0x30
     new_sync_write+0x27c/0x3a0
     vfs_write+0x3f7/0x5d0
     ksys_write+0xd9/0x180
     __x64_sys_write+0x43/0x50
     do_syscall_64+0x44/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to
alloc_pages().

Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.comSigned-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1].  For example, doing the following reliably induces the
panic:

    fd = memfd_secret();

    ftruncate(fd, 10);
    ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
    strcpy(ptr, "123456789");

    munmap(ptr, 10);
    ftruncate(fd, 20);

The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory.  The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).

For memfd_secret though, we specifically don't map our pages via the
direct map (i.e.  we call set_direct_map_invalid_noflush() on every
fault).  So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.

This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.

One could argue growing should be supported, but I think that will
require a significantly more lengthy change.  So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.

[1]:

  BUG: unable to handle page fault for address: ffffa0a889277028
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060
  Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  RIP: 0010:memset_erms+0x9/0x10
  Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
  RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8
  RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028
  RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028
  R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0
  R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8
  FS:  00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? zero_user_segments+0x82/0x190
   truncate_inode_partial_folio+0xd4/0x2a0
   truncate_inode_pages_range+0x380/0x830
   truncate_setsize+0x63/0x80
   simple_setattr+0x37/0x60
   notify_change+0x3d8/0x4d0
   do_sys_ftruncate+0x162/0x1d0
   __x64_sys_ftruncate+0x1c/0x20
   do_syscall_64+0x44/0xa0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
  CR2: ffffa0a889277028

[lkp@intel.com: secretmem_iops can be static]
Signed-off-by: kernel test robot <lkp@intel.com>
[axelrasmussen@google.com: return EINVAL]

Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.comSigned-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Chuck Lever reported fsx-based xfstests generic 075 091 112 127 failing
when 5.18-rc1 NFS server exports tmpfs: bisected to recent tmpfs change.

Whilst nfsd_splice_action() does contain some questionable handling of
repeated pages, and Chuck was able to work around there, history from
Mark Hemment makes clear that there might be similar dangers elsewhere:
it was not a good idea for me to pass ZERO_PAGE down to unknown actors.

Revert shmem_file_read_iter() to using ZERO_PAGE for holes only when
iter_is_iovec(); in other cases, use the more natural iov_iter_zero()
instead of copy_page_to_iter().

We would use iov_iter_zero() throughout, but the x86 clear_user() is not
nearly so well optimized as copy to user (dd of 1T sparse tmpfs file
takes 57 seconds rather than 44 seconds).

And now pagecache_init() does not need to SetPageUptodate(ZERO_PAGE(0)):
which had caused boot failure on arm noMMU STM32F7 and STM32H7 boards

Link: https://lkml.kernel.org/r/9a978571-8648-e830-5735-1f4748ce2e30@google.com
Fixes: 56a8c8eb ("tmpfs: do not allocate pages on read")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever III <chuck.lever@oracle.com>
Cc: Mark Hemment <markhemm@googlemail.com>
Cc: Patrice CHOTARD <patrice.chotard@foss.st.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert the broadcom internal list M: and L: entries to R: as exploder
email addresses are neither maintainers nor mailing lists.

Reorder the entries as necessary.

Link: https://lkml.kernel.org/r/04eb301f5b3adbefdd78e76657eff0acb3e3d87f.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The commit 92986f6b ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.

However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.

To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().

Fixes: 92986f6b ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Pull block fixes from Jens Axboe:

 - Moving of lower_48_bits() to the block layer and a fix for the
   unaligned_be48 added with that originally (Alexander, Keith)

 - Fix a bad WARN_ON() for trim size checking (Ming)

 - A polled IO timeout fix for null_blk (Ming)

 - Silence IO error printing for dead disks (Christoph)

 - Compat mode range fix (Khazhismel)

 - NVMe pull request via Christoph:
     - Tone down the error logging added this merge window a bit
       (Chaitanya Kulkarni)
     - Quirk devices with non-unique unique identifiers (Christoph)

* tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block:
  block: don't print I/O error warning for dead disks
  block/compat_ioctl: fix range check in BLKGETSIZE
  nvme-pci: disable namespace identifiers for Qemu controllers
  nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202
  nvme: add a quirk to disable namespace identifiers
  nvme: don't print verbose errors for internal passthrough requests
  block: null_blk: end timed out poll request
  block: fix offset/size check in bio_trim()
  asm-generic: fix __get_unaligned_be48() on 32 bit platforms
  block: move lower_48_bits() to block

Pull io_uring fixes from Jens Axboe:

 - Ensure we check and -EINVAL any use of reserved or struct padding.

   Although we generally always do that, it's missed in two spots for
   resource updates, one for the ring fd registration from this merge
   window, and one for the extended arg. Make sure we have all of them
   handled. (Dylan)

 - A few fixes for the deferred file assignment (me, Pavel)

 - Add a feature flag for the deferred file assignment so apps can tell
   we handle it correctly (me)

 - Fix a small perf regression with the current file position fix in
   this merge window (me)

* tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block:
  io_uring: abort file assignment prior to assigning creds
  io_uring: fix poll error reporting
  io_uring: fix poll file assign deadlock
  io_uring: use right issue_flags for splice/tee
  io_uring: verify pad field is 0 in io_get_ext_arg
  io_uring: verify resv is 0 in ringfd register/unregister
  io_uring: verify that resv2 is 0 in io_uring_rsrc_update2
  io_uring: move io_uring_rsrc_update2 validation
  io_uring: fix assign file locking issue
  io_uring: stop using io_wq_work as an fd placeholder
  io_uring: move apoll->events cache
  io_uring: io_kiocb_update_pos() should not touch file for non -1 offset
  io_uring: flag the fact that linked file assignment is sane

Merge tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "A mqueue perf test memory leak bug fix.

  mq_perf_tests failed to call CPU_FREE to free memory allocated by
  CPU_SET"

* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - 'perf record --per-thread' mode doesn't have the CPU mask setup, so
   it can use it to figure out the number of mmaps, fix it.

 - Fix segfault accessing sample_id xyarray out of bounds, noticed while
   using Intel PT where we have a dummy event to capture text poke perf
   metadata events and we mixup the set of CPUs specified by the user
   with the all CPUs map needed for text poke.

 - Fix 'perf bench numa' to check if CPU used to bind task is online.

 - Fix 'perf bench numa' usage of affinity for machines with more than
   1000 CPUs.

 - Fix misleading add event PMU debug message, noticed while using the
  'intel_pt' PMU.

 - Fix error check return value of hashmap__new() in 'perf stat', it
   must use IS_ERR().

* tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1K
  perf bench: Fix numa testcase to check if CPU used to bind task is online
  perf record: Fix per-thread option
  perf tools: Fix segfault accessing sample_id xyarray
  perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()
  perf tools: Fix misleading add event PMU debug message

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.18

 - tone down the error logging added this merge window a bit
   (Chaitanya Kulkarni)
 - quirk devices with non-unique unique identifiers (me)"

* tag 'nvme-5.18-2022-04-15' of git://git.infradead.org/nvme:
  nvme-pci: disable namespace identifiers for Qemu controllers
  nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202
  nvme: add a quirk to disable namespace identifiers
  nvme: don't print verbose errors for internal passthrough requests

When a disk has been marked dead, don't print warnings for I/O errors
as they are very much expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220323163815.1526998-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers.  In addition it can also optionally report
a eui64 which needs to be manually set.  Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles.  Disable using
the Identifiers entirely.
Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>

Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.

The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality).  This is similar to what the SCSI
verbose error logging does.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We need to either restore creds properly if we fail on the file
assignment, or just do the file assignment first instead. Let's do
the latter as it's simpler, should make no difference here for
file assignment.

Link: https://lore.kernel.org/lkml/000000000000a7edb305dca75a50@google.com/
Reported-by: syzbot+60c52ca98513a8760a91@syzkaller.appspotmail.com
Fixes: 6bf9c47a ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The intent behind commit e6fc9f62 ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.

But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio.  Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().

This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.

Fixes: 655f3aad ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Pull drm fixes from Dave Airlie:
 "Eggs season holidays are among us, and I think I'd expect some smaller
  pulls for two weeks then.

  This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I
  didn't see a misc pull this week, so I expect that will catch up next
  week.

  i915:
   - Correct legacy mmap disabling to use GRAPHICS_VER_FULL

  msm:
   - system suspend fix
   - kzalloc return checks
   - misc display fix
   - iommu_present removal

  amdgpu:
   - Fix for alpha properly in pre-multiplied mode
   - Fix VCN 3.1.2 firmware name
   - Suspend/resume fix
   - Add a gfxoff quirk for Mac vega20 board
   - DCN 3.1.6 spread spectrum fix"

* tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: remove dtbclk_ss compensation for dcn316
  drm/amdgpu: Enable gfxoff quirk on MacBook Pro
  drm/amdgpu: Ensure HDA function is suspended before ASIC reset
  drm/amdgpu: fix VCN 3.1.2 firmware name
  drm/amd/display: don't ignore alpha property on pre-multiplied mode
  drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP
  drm/msm/dp: add fail safe mode outside of event_mutex context
  drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()
  drm/msm: Stop using iommu_present()
  drm/msm/mdp5: check the return of kzalloc()
  drm/msm: Fix range size vs end confusion
  drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
  drm/msm/dpu: Use indexed array initializer to prevent mismatches
  drm/msm/disp: check the return value of kzalloc()
  dt-bindings: display/msm: another fix for the dpu-qcm2290 example
  drm/msm: Add missing put_task_struct() in debugfs path
  drm/msm/gpu: Remove mutex from wait_event condition
  drm/msm/gpu: Park scheduler threads for system suspend
  drm/msm/gpu: Rename runtime suspend/resume functions

Pull vfio fix from Alex Williamson:

 - Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe)

* tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used

Pull cifs fixes from Steve French:

 - two fixes related to unmount

 - symlink overflow fix

 - minor netfs fix

 - improved tracing for crediting (flow control)

* tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: verify that tcon is valid before dereference in cifs_kill_sb
  cifs: potential buffer overflow in handling symlinks
  cifs: Split the smb3_add_credits tracepoint
  cifs: release cached dentries only if mount is complete
  cifs: Check the IOCB_DIRECT flag, not O_DIRECT

When asked to create a path ending '/', but which is not to be a
directory (LOOKUP_DIRECTORY not set), filename_create() will never try
to create the file.  If it doesn't exist, -ENOENT is reported.

However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems
->lookup() function, even though there is no intent to create.  This is
misleading and can cause incorrect behaviour.

If you try

   ln -s foo /path/dir/

where 'dir' is a directory on an NFS filesystem which is not currently
known in the dcache, this will fail with ENOENT.

But as the name is not in the dcache, nfs_lookup gets called with
LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any
lookup, with the expectation that a subsequent call to create the target
will be made, and the lookup can be combined with the creation.  In the
case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never
made.  Instead filename_create() sees that the dentry is not (yet)
positive and returns -ENOENT - even though the directory actually
exists.

So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to
create, and use the absence of these flags to decide if -ENOENT should
be returned.

Note that filename_parentat() is only interested in LOOKUP_REVAL, so we
split that out and store it in 'reval_flag'.  __lookup_hash() then gets
reval_flag combined with whatever create flags were determined to be
needed.
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'amd-drm-fixes-5.18-2022-04-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-04-13:

amdgpu:
- Fix for alpha properly in pre-multiplied mode
- Fix VCN 3.1.2 firmware name
- Suspend/resume fix
- Add a gfxoff quirk for Mac vega20 board
- DCN 3.1.6 spread spectrum fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com