- 25 Mar, 2020 9 commits
-
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 (take two) - Thermal support for R-Car M3-W+, - Support for the M3ULCB board with R-Car M3-W+, - CPUIdle support for R-Car M3-N and E3, - Display support for the HiHope RZ/G2M board, - A minor fix. * tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+ arm64: dts: renesas: r8a77961: Add thermal nodes Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.beSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 (take two) - LCD/touchscreen support for the iwg22d-sodimm board. * tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg22d-sodimm: Enable touchscreen ARM: dts: iwg22d-sodimm: Enable LCD panel Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.orgSigned-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. * tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert Cygnus to YAML ARM: dts: bcm2711: Move emmc2 into its own bus ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.comSigned-off-by:
-
Chunyan Zhang authored
The SPRD serial driver need to know which serial port would be used as console in an early period during initialization, otherwise console init would fail since we added this feature[1]. So this patch add console to command line via devicetree. [1] https://lore.kernel.org/lkml/20190826072929.7696-4-zhang.lyra@gmail.com/ Link: https://lore.kernel.org/r/20200311112120.30890-1-zhang.lyra@gmail.comSigned-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.7 merge window Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. * tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Add idle_states for cpuidle ARM: dts: am33xx: Add idle_states for cpuidle ARM: dts: Configure omap5 AESS Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 - CryptoCell support for R-Car M3-W, M3-W+, M3-N, E3, and D3, - Miscellaneous fixes and improvements. * tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: rcar-gen3: Add reset control properties for display arm64: dts: renesas: Remove use of ARCH_R8A7795 arm64: dts: renesas: rcar-gen3: Add CCREE nodes arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible Link: https://lore.kernel.org/r/20200226110221.19288-5-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: rzg1: Add reset control properties for display ARM: dts: rcar-gen2: Add reset control properties for display ARM: dts: r8a7745: Convert to new DU DT bindings ARM: dts: r7s72100: Add SPIBSC clocks ARM: dts: renesas: Group tuples in operating-points properties ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards Link: https://lore.kernel.org/r/20200226110221.19288-2-geert+renesas@glider.beSigned-off-by:
-
- 12 Mar, 2020 6 commits
-
-
Fabrizio Castro authored
The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to work with HiHope RZ/G2M, is the most convenient way to support the HiHope RZ/G2M when it's connected to the idk-1110wr. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1583957020-16359-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Takeshi Kihara authored
Enable cpuidle (core shutdown) support for the CA53 cores on R-Car E3. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
-
Takeshi Kihara authored
Enable cpuidle (core shutdown) support for the CA57 cores on R-Car M3-N. Signed-off-by:
-
Geert Uytterhoeven authored
Correct the unit-address of the second memory node, to match the corresponding reg property. Fixes: 92980759 ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+") Signed-off-by:
-
Yuya Hamamachi authored
Add initial support for the Renesas M3ULCB board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. To avoid build error on 'ulcb.dtsi', ssi2 is added into 'r8a77961.dtsi'. Based on commit 92980759 ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+"). Signed-off-by:
Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Link: https://lore.kernel.org/r/20200309064425.25437-3-yuya.hamamachi.sx@renesas.comSigned-off-by:
-
Geert Uytterhoeven authored
Add a device node for the Thermal Sensor/Chip Internal Voltage Monitor in the R-Car M3-W+ (R8A77961) SoC, and describe the thermal zones. According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for R-Car M3-W. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200306110025.24747-1-geert+renesas@glider.be
-
- 11 Mar, 2020 6 commits
-
-
Jernej Skrabec authored
Allwinner A64 contains rotation core compatible to A83T. Add a node for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Chen-Yu Tsai <wens@csie.org>
-
Jernej Skrabec authored
Allwinner A83T contains rotation core. Add a node for it. Signed-off-by:
-
Jernej Skrabec authored
Register range of display clocks is 0x10000, as it can be seen from DE2 documentation. Fix it. Signed-off-by:
-
Jernej Skrabec authored
As it can be seen from DE2 manual, clock range is 0x10000. Fix it. Signed-off-by:
-
Marian-Cristian Rotariu authored
In one of the iWave-G22D development board variants, called Generic SODIMM Development Platform, we have an LCD with touchscreen. The resistive touch controller, STMPE811 is on the development board and is connected through the i2c5 of the RZ-G1E. Additionally, this controller should generate an interrupt to the CPU and it is connected through GPIO4,4 to the GIC. Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development platforms. More details on the iWave website: https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.htmlSigned-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1583336650-25848-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.comSigned-off-by:
-
Marian-Cristian Rotariu authored
On the Generic SODIMM Development Platform there is an RGB LCD panel directly connected to the DU output. It uses the TPU0 as backlight, one GPIO pull-up configuration for power enable, R[2:7], G[2:7], B[2:7], VSYNC, HSYNC, DU0_DISP and, DU0_CLK as inputs. There is no encoder between the DU and the panel, therefore the default connector driver is used. The two variants of the iW-G22D should be mutually exclusive, therefore this patch also disables the RGB LCD display when the HDMI extension board is used. Signed-off-by:
-
- 10 Mar, 2020 12 commits
-
-
Florian Fainelli authored
Consolidate and move the 'secondary-boot-reg' property from the 3 existing binding documents into the main cpus.yaml documentation, also make sure that the property is enforced when relevant. Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
Update Vulcan SoC family binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom BCM11351 SoC family binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom BCM4708 SoC family binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom BCM23550 SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom BCM21664 SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom Stingray SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom Northstar 2 SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom Northstar Plus SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadcom Hurricane 2 SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
Update the Broadocom Cygnus SoC binding document for boards/SoCs to use YAML. Verified with dt_binding_check and dtbs_check. Acked-by:
-
Florian Fainelli authored
This tag adds GPIO labels to RPi4 and moves emmc2 to its own bus in order for RPi4's firmware to correct its DMA constraints. Signed-off-by:
-
- 09 Mar, 2020 5 commits
-
-
Nicolas Saenz Julienne authored
Depending on bcm2711's revision its emmc2 controller might have different DMA constraints. Raspberry Pi 4's firmware will take care of updating those, but only if a certain alias is found in the device tree. So, move emmc2 into its own bus, so as not to pollute other devices with dma-ranges changes and create the emmc2bus alias. Based in Phil ELwell's downstream implementation. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200304132437.20164-1-nsaenzjulienne@suse.de
-
Stefan Wahren authored
This adds the labels for all the SoC GPIOs on the Raspberry Pi 4. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1581166975-22949-5-git-send-email-stefan.wahren@i2se.comSigned-off-by:
-
Marcus Cooper authored
Both, OrangePi One Plus and OrangePi Lite 2 have HDMI output. Enable it in common DTSI. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> [patch split and commit message] Signed-off-by:
Christopher Obbard <chris@64studio.com> Tested-by:
Maxime Ripard <maxime@cerno.tech>
-
Marcus Cooper authored
OrangePi One Plus has gigabit ethernet. Add nodes for it. Signed-off-by:
-
Jernej Skrabec authored
It turns out that not all H6 boards have external 32kHz oscillator. Currently the only one known such H6 board is Tanix TX6. Move external oscillator node from common H6 dtsi to board specific dts files where present. Signed-off-by:
-
- 04 Mar, 2020 2 commits
-
-
Linus Walleij authored
Discussing the YAML validation schema with the DT maintainers it came out that a bus named "smb@80000000" is not really accepted, and the schema was written to name the static memory bus just "bus@80000000". This change is necessary for the schema to kick in and validate these device trees, else the schema gets ignored. Cc: Rob Herring <robh+dt@kernel.org> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Linus Walleij authored
We created new bindings for the ARM Board using YAML so delete the old human-parseable-only bindings. Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
-
