- 20 Oct, 2022 40 commits
-
-
Martin Kaiser authored
Remove the padapter parameter from the SwLedOff function. padapter can be derived from the pLed parameter. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20221015151115.232095-6-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
Remove the padapter parameter from the SwLedOn function. padapter can be derived from the pLed parameter. Signed-off-by:
-
Martin Kaiser authored
Update bLedOn only if we could update the REG_LEDCFG2 register. Signed-off-by:
-
Martin Kaiser authored
Check the status returned by rtw_write8. Update bLedOn only if we could update the REG_LEDCFG2 register. Signed-off-by:
-
Martin Kaiser authored
Using an InterTech DMG-02 dongle, the led remains on when the system goes into standby mode. After wakeup, it's no longer possible to control the led. It turned out that the register settings to enable or disable the led were not correct. They worked for some dongles like the Edimax V2 but not for others like the InterTech DMG-02. This patch fixes the register settings. Bit 3 in the led_cfg2 register controls the led status, bit 5 must always be set to be able to control the led, bit 6 has no influence on the led. Setting the mac_pinmux_cfg register is not necessary. These settings were tested with Edimax V2 and InterTech DMG-02. Cc: stable@vger.kernel.org Fixes: 8cd574e6 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver") Suggested-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Anjandev Momi authored
This patch removes the following check generated by checkpatch.pl ./drivers/staging/rtl8192e/rtl819x_BAProc.c:65: CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by:
Anjandev Momi <anjan@momi.ca> Link: https://lore.kernel.org/r/20221014081839.23902-5-anjan@momi.caSigned-off-by:
-
Anjandev Momi authored
This patch removes the following checks generated by checkpatch.pl: ./drivers/staging/rtl8192e/rtl819x_BAProc.c:261: CHECK: Alignment should match open parenthesis ./drivers/staging/rtl8192e/rtl819x_BAProc.c:284: CHECK: Alignment should match open parenthesis ./drivers/staging/rtl8192e/rtl819x_BAProc.c:421: CHECK: Alignment should match open parenthesis ./drivers/staging/rtl8192e/rtl819x_BAProc.c:441: CHECK: Alignment should match open parenthesis Signed-off-by:
-
Anjandev Momi authored
This patch removes the following checks generated by checkpatch.pl: ./drivers/staging/rtl8192e/rtl819x_BAProc.c:164: CHECK: Please don't use multiple blank lines ./drivers/staging/rtl8192e/rtl819x_BAProc.c:383: CHECK: Please don't use multiple blank lines Signed-off-by:
-
Anjandev Momi authored
This patch removes the following CHECK generated by checkpatch.pl: ./drivers/staging/rtl8192e/rtl819x_BAProc.c:116: CHECK: Unnecessary parentheses around pBA->ba_start_seq_ctrl ./drivers/staging/rtl8192e/rtl819x_BAProc.c:261: CHECK: Unnecessary parentheses around '&pTS' ./drivers/staging/rtl8192e/rtl819x_BAProc.c:346: CHECK: Unnecessary parentheses around '&pTS' Signed-off-by:
-
Martin Kaiser authored
The ignore_received_deauth is in fact a boolean variable. Change its type to bool and use true, false for its values. Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20221015152440.232281-10-martin@kaiser.cxSigned-off-by:
-
Martin Kaiser authored
Summarize the two statements to check if either WIFI_FW_AUTH_STATE or WIFI_FW_ASSOC_STATE is set. Signed-off-by:
-
Martin Kaiser authored
Remove the return statement at the end of the if branch. We can continue to the final return after the if-else. Signed-off-by:
-
Martin Kaiser authored
If we receive a deauth message from an unknown station, we can drop this message and exit immediately. Reorder the code to make this clearer, don't wrap everything in an if statement. Signed-off-by:
-
Martin Kaiser authored
For management frames, Addr3 is the BSSID. Read it from the mgmt structure instead of calling GetAddr3Ptr. The pframe variable is now unused and can be removed. Signed-off-by:
-
Martin Kaiser authored
For management frames, Addr2 is the Source Address (SA). Use sa from the mgmt structure and remove the GetAddr2Ptr call. GetAddr2Ptr is a driver-specific function that we should eventually remove. Signed-off-by:
-
Martin Kaiser authored
bBusyTraffic is set only if we're not in WIFI_AP_STATE, i.e. in the else branch. If we were not in WIFI_AP_STATE, we'd go into the if branch and return _SUCCESS before making it to the bBusyTraffic assignment. Move the assignment into the else branch to make this clearer. Signed-off-by:
-
Martin Kaiser authored
Read the deauth reson code from the newly added mgmt structure instead of calculating the offset ourselves. Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt for the message that we process in OnDeAuth. Use this struct to read the bssid. This patch removes one GetAddr3Ptr call, getting us a tiny step closer to removing GetAddr3Ptr. Signed-off-by:
-
Rigel Di Scala authored
Fixed a coding style issue affecting a conditional if statement. Signed-off-by:
Rigel Di Scala <zedr@zedr.com> Tested-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/20221012211612.75871-1-zedr@zedr.comSigned-off-by:
-
Rui Li authored
This commit cleans up checkpatch warning as follows: braces {} are not necessary for single statement blocks Signed-off-by:Rui Li <me@lirui.org> Tested-by:
-
Dragan Cvetic authored
Rename variable Op to op, Length to length and Value to value to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
Dragan Cvetic <dragan.m.cvetic@gmail.com> Tested-by:
-
Dragan Cvetic authored
Rename variable CurSTAConnectState to cur_sta_connect_state, PreSTAConnectState to pre_sta_connect_state to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Dragan Cvetic authored
Remove braces around single line statement, to resolve checkpatch.pl warnings "braces {} are not necessary for single statement blocks" Signed-off-by: -
Colin Ian King authored
There is a spelling mistake in a Kconfig description. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221007202941.2756304-1-colin.i.king@gmail.comSigned-off-by:
-
Emily Peri authored
Remove extra parenthesis in conditional statement in rtw_ioctl_set. Issue found by checkpatch. Signed-off-by:
Emily Peri <eperi1024@gmail.com> Link: https://lore.kernel.org/r/a08a440eabddd8e78d045ca9898a415d81f6f6d7.1666230736.git.eperi1024@gmail.comSigned-off-by:
-
Emily Peri authored
Align '*' on each line of block comment in rtw_ioctl_set. Issue found by checkpatch. Signed-off-by:
-
Emily Peri authored
checkpatch found extra tabs in two conditional statements in rtw_ieee80211.c. Should be one tab instead of two. Signed-off-by:
-
Colin Ian King authored
The variable efuseValue is being initialized with a value that is never read. The variable is being re-assigned later on. The initialization is redundant and can be removed. Cleans up warning: drivers/staging/rtl8723bs/core/rtw_efuse.c:285:6: warning: variable 'efuseValue' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
There is a spellig mistake, correct it and fix capital letter on the proper noun. Also fix the grammar. Signed-off-by:
-
Michael Straube authored
The function rtw_free_drv_sw() always returns _SUCCESS. None of its callers use the return value. Convert the return type of that function from u8 to void. This is part of getting rid of _FAIL / _SUCCESS. Signed-off-by:
-
Michael Straube authored
The function rtw_reset_drv_sw() always returns _SUCCESS. None of its callers use the return value. Convert the return type of that function from u8 to void. This is part of getting rid of _FAIL / _SUCCESS. Signed-off-by:
-
Michael Straube authored
Convert the function _rtw_init_sta_priv() to common kernel error logic. Return 0 on success and negative value on failure. This is part of getting rid of returning _SUCCESS and _FAIL which uses inverted error logic and is used all over the driver. Signed-off-by:
-
Michael Straube authored
Convert the function rtw_init_mlme_priv() to common kernel error logic. Return 0 on success and negative value on failure. This is part of getting rid of returning _SUCCESS and _FAIL which uses inverted error logic and is used all over the driver. Signed-off-by:
-
Michael Straube authored
Convert the function rtw_init_cmd_priv() to common kernel error logic. Return 0 on success and negative value on failure. This is part of getting rid of returning _SUCCESS and _FAIL which uses inverted error logic and is used all over the driver. Signed-off-by:
-
Michael Straube authored
Convert the function rtw_init_evt_priv() to common kernel error logic. Return 0 on success and negative value on failure. This is part of getting rid of returning _SUCCESS and _FAIL which uses inverted error logic and is used all over the driver. Signed-off-by:
-
Michael Straube authored
The macros SET_TX_DESC_ANTSEL_{A,B,C}_88E are used in odm_RTL8188E.c. Move them from odm_types.h to odm_RTL8188E.h. ODM_CE is used in places where also ODM_ITRF_USB is used in the code. Move the ODM_CE define to the header that defines ODM_ITRF_USB. While at it remove an extra space between '#' and 'define ODM_ITRF_USB'. The haeder odm_types.h is now empty and we can remove it. Signed-off-by: -
Philipp Hortmann authored
bDriverIsGoingToUnload is never evaluated. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
ScanDelay is never evaluated. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
bForcedSilentReset is never evaluated. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
bDisableNormalResetCheck is just once initialized with false. All evaluations will result in !false. Remove resulting dead code. Signed-off-by:
-
