Encountered the following failure building libbpf from kernel 5.8.5 sources
with GCC 8.4.0 and binutils 2.34: (long paths shortened)

  Warning: Num of global symbols in sharedobjs/libbpf-in.o (234) does NOT
  match with num of versioned symbols in libbpf.so (236). Please make sure
  all LIBBPF_API symbols are versioned in libbpf.map.
  --- libbpf_global_syms.tmp    2020-09-02 07:30:58.920084380 +0000
  +++ libbpf_versioned_syms.tmp 2020-09-02 07:30:58.924084388 +0000
  @@ -1,3 +1,5 @@
  +_fini
  +_init
   bpf_btf_get_fd_by_id
   bpf_btf_get_next_id
   bpf_create_map
  make[4]: *** [Makefile:210: check_abi] Error 1

Investigation shows _fini and _init are actually local symbols counted
amongst global ones:

  $ readelf --dyn-syms --wide libbpf.so|head -10

  Symbol table '.dynsym' contains 343 entries:
     Num:    Value  Size Type    Bind   Vis      Ndx Name
       0: 00000000     0 NOTYPE  LOCAL  DEFAULT  UND
       1: 00004098     0 SECTION LOCAL  DEFAULT   11
       2: 00004098     8 FUNC    LOCAL  DEFAULT   11 _init@@LIBBPF_0.0.1
       3: 00023040     8 FUNC    LOCAL  DEFAULT   14 _fini@@LIBBPF_0.0.1
       4: 00000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.0.4
       5: 00000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.0.1
       6: 0000ffa4     8 FUNC    GLOBAL DEFAULT   12 bpf_object__find_map_by_offset@@LIBBPF_0.0.1

A previous commit filtered global symbols in sharedobjs/libbpf-in.o. Do the
same with the libbpf.so DSO for consistent comparison.

Fixes: 306b267c ("libbpf: Verify versioned symbols")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200905214831.1565465-1-Tony.Ambardar@gmail.com

Bryce reported that he saw the following with:

  0:  r6 = r1
  1:  r1 = 12
  2:  r0 = *(u16 *)skb[r1]

The xlated sequence was incorrectly clobbering r2 with pointer
value of r6 ...

  0: (bf) r6 = r1
  1: (b7) r1 = 12
  2: (bf) r1 = r6
  3: (bf) r2 = r1
  4: (85) call bpf_skb_load_helper_16_no_cache#7692160

... and hence call to the load helper never succeeded given the
offset was too high. Fix it by reordering the load of r6 to r1.

Other than that the insn has similar calling convention than BPF
helpers, that is, r0 - r5 are scratch regs, so nothing else
affected after the insn.

Fixes: e0cea7ce ("bpf: implement ld_abs/ld_ind in native bpf")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.net

Yonghong Song says:

====================
Currently, the bpf hashmap iterator takes a bucket_lock, a spin_lock,
before visiting each element in the bucket. This will cause a deadlock
if a map update/delete operates on an element with the same
bucket id of the visited map.

To avoid the deadlock, let us just use rcu_read_lock instead of
bucket_lock. This may result in visiting stale elements, missing some elements,
or repeating some elements, if concurrent map delete/update happens for the
same map. I think using rcu_read_lock is a reasonable compromise.
For users caring stale/missing/repeating element issues, bpf map batch
access syscall interface can be used.

Note that another approach is during bpf_iter link stage, we check
whether the iter program might be able to do update/delete to the visited
map. If it is, reject the link_create. Verifier needs to record whether
an update/delete operation happens for each map for this approach.
I just feel this checking is too specialized, hence still prefer
rcu_read_lock approach.

Patch #1 has the kernel implementation and Patch #2 added a selftest
which can trigger deadlock without Patch #1.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Added bpf_{updata,delete}_map_elem to the very map element the
iter program is visiting. Due to rcu protection, the visited map
elements, although stale, should still contain correct values.
  $ ./test_progs -n 4/18
  #4/18 bpf_hash_map:OK
  #4 bpf_iter:OK
  Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200902235341.2001534-1-yhs@fb.com

Currently, for hashmap, the bpf iterator will grab a bucket lock, a
spinlock, before traversing the elements in the bucket. This can ensure
all bpf visted elements are valid. But this mechanism may cause
deadlock if update/deletion happens to the same bucket of the
visited map in the program. For example, if we added bpf_map_update_elem()
call to the same visited element in selftests bpf_iter_bpf_hash_map.c,
we will have the following deadlock:

  ============================================
  WARNING: possible recursive locking detected
  5.9.0-rc1+ #841 Not tainted
  --------------------------------------------
  test_progs/1750 is trying to acquire lock:
  ffff9a5bb73c5e70 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x1cf/0x410

  but task is already holding lock:
  ffff9a5bb73c5e20 (&htab->buckets[i].raw_lock){....}-{2:2}, at: bpf_hash_map_seq_find_next+0x94/0x120

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&htab->buckets[i].raw_lock);
    lock(&htab->buckets[i].raw_lock);

   *** DEADLOCK ***
   ...
  Call Trace:
   dump_stack+0x78/0xa0
   __lock_acquire.cold.74+0x209/0x2e3
   lock_acquire+0xba/0x380
   ? htab_map_update_elem+0x1cf/0x410
   ? __lock_acquire+0x639/0x20c0
   _raw_spin_lock_irqsave+0x3b/0x80
   ? htab_map_update_elem+0x1cf/0x410
   htab_map_update_elem+0x1cf/0x410
   ? lock_acquire+0xba/0x380
   bpf_prog_ad6dab10433b135d_dump_bpf_hash_map+0x88/0xa9c
   ? find_held_lock+0x34/0xa0
   bpf_iter_run_prog+0x81/0x16e
   __bpf_hash_map_seq_show+0x145/0x180
   bpf_seq_read+0xff/0x3d0
   vfs_read+0xad/0x1c0
   ksys_read+0x5f/0xe0
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ...

The bucket_lock first grabbed in seq_ops->next() called by bpf_seq_read(),
and then grabbed again in htab_map_update_elem() in the bpf program, causing
deadlocks.

Actually, we do not need bucket_lock here, we can just use rcu_read_lock()
similar to netlink iterator where the rcu_read_{lock,unlock} likes below:
 seq_ops->start():
     rcu_read_lock();
 seq_ops->next():
     rcu_read_unlock();
     /* next element */
     rcu_read_lock();
 seq_ops->stop();
     rcu_read_unlock();

Compared to old bucket_lock mechanism, if concurrent updata/delete happens,
we may visit stale elements, miss some elements, or repeat some elements.
I think this is a reasonable compromise. For users wanting to avoid
stale, missing/repeated accesses, bpf_map batch access syscall interface
can be used.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200902235340.2001375-1-yhs@fb.com

Ubuntu mainline builds for ppc64le are failing with the below error (*):
    CALL    /home/kernel/COD/linux/scripts/atomic/check-atomics.sh
    DESCEND  bpf/resolve_btfids

  Auto-detecting system features:
  ...                        libelf: [ [32mon[m  ]
  ...                          zlib: [ [32mon[m  ]
  ...                           bpf: [ [31mOFF[m ]

  BPF API too old
  make[6]: *** [Makefile:295: bpfdep] Error 1
  make[5]: *** [Makefile:54: /home/kernel/COD/linux/debian/build/build-generic/tools/bpf/resolve_btfids//libbpf.a] Error 2
  make[4]: *** [Makefile:71: bpf/resolve_btfids] Error 2
  make[3]: *** [/home/kernel/COD/linux/Makefile:1890: tools/bpf/resolve_btfids] Error 2
  make[2]: *** [/home/kernel/COD/linux/Makefile:335: __build_one_by_one] Error 2
  make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-generic'
  make[1]: *** [Makefile:185: __sub-make] Error 2
  make[1]: Leaving directory '/home/kernel/COD/linux'

resolve_btfids needs to be build as a host binary and it needs libbpf.
However, libbpf Makefile hardcodes an include path utilizing $(ARCH).
This results in mixing of cross-architecture headers resulting in a
build failure.

The specific header include path doesn't seem necessary for a libbpf
build. Hence, remove the same.

(*) https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9-rc3/ppc64el/logReported-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200902084246.1513055-1-naveen.n.rao@linux.vnet.ibm.com

The new resolve_btfids tool did not clean up the feature detection folder
on 'make clean', and also was not called properly from the clean rule in
tools/make/ folder on its 'make clean'. This lead to stale objects being
left around, which could cause feature detection to fail on subsequent
builds.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200901144343.179552-1-toke@redhat.com

While compiling libbpf, some GCC versions (at least 8.4.0) have difficulty
determining control flow and a emit warning for potentially uninitialized
usage of 'map', which results in a build error if using "-Werror":

In file included from libbpf.c:56:
libbpf.c: In function '__bpf_object__open':
libbpf_internal.h:59:2: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
  libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
  ^~~~~~~~~~~~
libbpf.c:5032:18: note: 'map' was declared here
  struct bpf_map *map, *targ_map;
                  ^~~

The warning/error is false based on code inspection, so silence it with a
NULL initialization.

Fixes: 646f02ff ("libbpf: Add BTF-defined map-in-map support")
Reference: 063e6881 ("libbpf: Fix false uninitialized variable warning")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831000304.1696435-1-Tony.Ambardar@gmail.com

Daniel Borkmann says:

====================
pull-request: bpf 2020-08-28

The following pull-request contains BPF updates for your *net* tree.

We've added 4 non-merge commits during the last 4 day(s) which contain
a total of 4 files changed, 7 insertions(+), 4 deletions(-).

The main changes are:

1) Fix out of bounds access for BPF_OBJ_GET_INFO_BY_FD retrieval, from Yonghong Song.

2) Fix wrong __user annotation in bpf_stats sysctl handler, from Tobias Klauser.

3) Few fixes for BPF selftest scripting in test_{progs,maps}, from Jesper Dangaard Brouer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When ->init() fails, ->destroy() is called to clean up.
So it is unnecessary to clean up in red_init(), and it
would cause some refcount underflow.

Fixes: aee9caa0 ("net: sched: sch_red: Add qevents "early_drop" and "mark"")
Reported-and-tested-by: syzbot+b33c1cb0a30ebdc8a5f9@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+e5ea5f8a3ecfd4427a1c@syzkaller.appspotmail.com
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.

Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail

write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
 skb_queue_tail+0xcc/0x120
 __netlink_sendskb+0x55/0x80
 netlink_broadcast_filtered+0x465/0x7e0
 nlmsg_notify+0x8f/0x120
 rtnl_notify+0x8e/0xb0
 __neigh_notify+0xf2/0x120
 neigh_update+0x927/0xde0
 arp_process+0x8a3/0xf50
 arp_rcv+0x27c/0x3b0
 __netif_receive_skb_core+0x181c/0x1840
 __netif_receive_skb+0x38/0xf0
 netif_receive_skb_internal+0x77/0x1c0
 napi_gro_receive+0x1bd/0x1f0
 e1000_clean_rx_irq+0x538/0xb20 [e1000]
 e1000_clean+0x5e4/0x1340 [e1000]
 net_rx_action+0x310/0x9d0
 __do_softirq+0xe8/0x308
 irq_exit+0x109/0x110
 do_IRQ+0x7f/0xe0
 ret_from_intr+0x0/0x1d
 0xffffffffffffffff

read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
 netlink_recvmsg+0x40b/0x820
 sock_recvmsg+0xc9/0xd0
 ___sys_recvmsg+0x1a4/0x3b0
 __sys_recvmsg+0x86/0x120
 __x64_sys_recvmsg+0x52/0x70
 do_syscall_64+0xb5/0x360
 entry_SYSCALL_64_after_hwframe+0x65/0xca
 0xffffffffffffffff

Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()
Signed-off-by: zhudi <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
We have:
 * fixes for AQL (airtime queue limits)
 * reduce packet loss detection false positives
 * a small channel number fix for the 6 GHz band
 * a fix for 80+80/160 MHz negotiation
 * an nl80211 attribute (NL80211_ATTR_HE_6GHZ_CAPABILITY) fix
 * add a missing sanity check for the regulatory code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When stdout output from the selftests tool 'test_maps' gets redirected
into e.g file or pipe, then the output lines increase a lot (from 21
to 33949 lines).  This is caused by the printf that happens before the
fork() call, and there are user-space buffered printf data that seems
to be duplicated into the forked process.

To fix this fflush() stdout before the fork loop in __run_parallel().

Fixes: 1a97cf1f ("selftests/bpf: speedup test_maps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/159842985651.1050885.2154399297503372406.stgit@firesoul

Fix a memory leak in rxkad_verify_response() whereby the response buffer
doesn't get freed if we fail to allocate a ticket buffer.

Fixes: ef68622d ("rxrpc: Handle temporary errors better in rxkad security")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc, afs: Fix probing issues

Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in
rxrpc and thence the Volume Location server probing in afs:

 (1) Move the serial number of a received ACK into a local variable to
     simplify the next patch.

 (2) Fix the loss of RTT samples due to extra interposed ACKs causing
     baseline information to be discarded too early.  This is a particular
     problem for afs when it sends a single very short call to probe a
     server it hasn't talked to recently.

 (3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen
     any valid samples or not.

 (4) Remove a field that's set/woken, but never read/waited on.

 (5) Expose the RTT and other probe information through procfs to make
     debugging of this stuff easier.

 (6) Fix VL rotation in afs to only use summary information from VL probing
     and not the probe running state (which gets clobbered when next a
     probe is issued).

 (7) Fix VL rotation to actually return the error aggregated from the probe
     errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid()

 - pm_runtime_get_sync() returns non zero value. This results in
   non zero value return to caller which will be interpreted as error.
   So overwrite ret with zero.
 - If VID matches with port VLAN VID, then set error code.
 - Currently when VLAN interface is deleted, all of the VLAN mc addresses
   are removed from ALE table, however the return values from ale function
   calls are not checked. These functions can return error code -ENOENT.
   But that shouldn't happen in a normal case. So add error print to
   catch the situations so that these can be investigated and addressed.
   return zero in these cases as these are not real error case, but only
   serve to catch ALE table update related issues and help address the
   same in the driver.

Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix some comments, including wrong function name, duplicated word and so
on.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust the 6 GHz frequency to channel conversion function,
the other way around was previously handled.
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org
[rewrite commit message, hard-code channel 2]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When running a large number of packets per second with a high data rate
and long A-MPDUs, the packet loss threshold can be reached very quickly
when the link conditions change. This frequently shows up as spurious
disconnects.
Mitigate false positives by using a similar logic for regular stations
as the one being used for TDLS, though with a more aggressive timeout.
Packet loss events are only reported if no ACK was received for a second.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200808172542.41628-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Fix cfg80211_chandef_usable():
consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz.

Based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20200826143139.25976-1-shay.bar@celeno.com
[reformat the code a bit and use u32_get_bits()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Links with low data rates use much smaller aggregates and are much more
sensitive to latency added by bufferbloat.
Tune the assumed aggregation length based on the tx rate duration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-3-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This will be used to enhance AQL estimated aggregation length
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-2-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Since ieee80211_tx_info does not have enough room to encode HE rates, HE
drivers use status->rate to provide rate info.
Store it in struct sta_info and use it for AQL.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Jakub Kicinski says:

====================
net: fix netpoll crash with bnxt

Rob run into crashes when using XDP on bnxt. Upon investigation
it turns out that during driver reconfig irq core produces
a warning message when IRQs are requested. This triggers netpoll,
which in turn accesses uninitialized driver state. Same crash can
also be triggered on this platform by changing the number of rings.

Looks like we have two missing pieces here, netif_napi_add() has
to make sure we start out with netpoll blocked. The driver also
has to be more careful about when napi gets enabled.

Tested XDP and channel count changes, the warning message no longer
causes a crash. Not sure if the memory barriers added in patch 1
are necessary, but it seems we should have them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Netpoll can try to poll napi as soon as napi_enable() is called.
It crashes trying to access a doorbell which is still NULL:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S                5.9.0-rc1-00469-g5fd99b5d-dirty #26
 RIP: 0010:bnxt_poll+0x121/0x1c0
 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02
41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a
  netpoll_poll_dev+0xbd/0x1a0
  __netpoll_send_skb+0x1b2/0x210
  netpoll_send_udp+0x2c9/0x406
  write_ext_msg+0x1d7/0x1f0
  console_unlock+0x23c/0x520
  vprintk_emit+0xe0/0x1d0
  printk+0x58/0x6f
  x86_vector_activate.cold+0xf/0x46
  __irq_domain_activate_irq+0x50/0x80
  __irq_domain_activate_irq+0x32/0x80
  __irq_domain_activate_irq+0x32/0x80
  irq_domain_activate_irq+0x25/0x40
  __setup_irq+0x2d2/0x700
  request_threaded_irq+0xfb/0x160
  __bnxt_open_nic+0x3b1/0x750
  bnxt_open_nic+0x19/0x30
  ethtool_set_channels+0x1ac/0x220
  dev_ethtool+0x11ba/0x2240
  dev_ioctl+0x1cf/0x390
  sock_do_ioctl+0x95/0x130
Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.

This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().

To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff12 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_info_notify_update() is always called with RTNL held, but not from
an RCU read-side critical section. This leads to the following warning
[1] when the FIB table list is traversed with
hlist_for_each_entry_rcu(), but without a proper lockdep expression.

Since modification of the list is protected by RTNL, silence the warning
by adding a lockdep expression which verifies RTNL is held.

[1]
 =============================
 WARNING: suspicious RCU usage
 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted
 -----------------------------
 net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by ip/834:
  #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0

 stack backtrace:
 CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
 Call Trace:
  dump_stack+0x100/0x184
  lockdep_rcu_suspicious+0x143/0x14d
  fib_info_notify_update+0x8d1/0xa60
  __nexthop_replace_notify+0xd2/0x290
  rtm_new_nexthop+0x35e2/0x5946
  rtnetlink_rcv_msg+0x4f7/0xbd0
  netlink_rcv_skb+0x17a/0x480
  rtnetlink_rcv+0x22/0x30
  netlink_unicast+0x5ae/0x890
  netlink_sendmsg+0x98a/0xf40
  ____sys_sendmsg+0x879/0xa00
  ___sys_sendmsg+0x122/0x190
  __sys_sendmsg+0x103/0x1d0
  __x64_sys_sendmsg+0x7d/0xb0
  do_syscall_64+0x32/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fde28c3be57
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51
c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57
RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003
RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c
R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020

Fixes: 1bff1a0c ("ipv4: Add function to send route updates")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After subflow lock is dropped, more wmem might have been made available.

This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted.
But as the mptcp socket holds on to already-acked data (for retransmit)
no wakeup will occur.

Using 'goto restart' calls mptcp_clean_una(sk) which will free pages
that have been acked completely in the mean time.

Fixes: fb529e62 ("mptcp: break and restart in case mptcp sndbuf is full")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 9c66d156 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:

In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.

The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.

Fixes: 9c66d156 ("taprio: Add support for hardware offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails:

drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter'

Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e10dcb1b ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL
and it is udp packet, which has a dest port as the IANA assigned.
the hardware is expected to do the checksum offload, but the
hardware will not do the checksum offload when udp dest port is
6081.

This patch fixes it by doing the checksum in software.
Reported-by: Li Bing <libing@winhong.com>
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

This set of driver patches include bug fixes for ethtool get channels,
ethtool statistics, ethtool NVRAM, AER recovery, a firmware reset issue
that could potentially crash, hwmon temperature reporting issue on VF,
and 2 fixes for regressions introduced by the recent user-defined RSS
map feature.

Please queue patches 1 to 6 for -stable.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent changes to support user-defined RSS map assume that RX
rings are always reserved and the default RSS map is set after the
RX rings are successfully reserved.  If the firmware spec is older
than 1.6.1, no ring reservations are required and the default RSS
map is not setup at all.  In another scenario where the fw Resource
Manager is older, RX rings are not reserved and we also end up with
no valid RSS map.

Fix both issues in bnxt_need_reserve_rings().  In both scenarios
described above, we don't need to reserve RX rings so we need to
call this new function bnxt_check_rss_map_no_rmgr() to setup the
default RSS map when needed.

Without valid RSS map, the NIC won't receive packets properly.

Fixes: 1667cbf6 ("bnxt_en: Add logical RSS indirection table structure.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no VF rings available during probe when the device is configured
using the Minimal-Static reservation strategy. In this case, the RSS
indirection table can only be initialized later, during bnxt_open_nic().
However, this was not happening because the rings will already have been
reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings()
to return false in bnxt_reserve_rings() and bypass the RSS table init.

Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into
__bnxt_reserve_rings(), which is common to both paths and is called
whenever ring configuration is changed. After doing this, the RSS table
init that must be called from bnxt_init_one() happens implicitly via
bnxt_set_default_rings(), necessitating doing the allocation earlier in
order to avoid a null pointer dereference.

Fixes: bd3191b5 ("bnxt_en: Implement ethtool -X to set indirection table.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.

The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.

Fixes: cde49a42 ("bnxt_en: Add hwmon sysfs support to read temperature")
Cc: Marc Smith <msmith626@gmail.com>
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_fw_reset_task() is run from a delayed workqueue.  The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.

The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one().  bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling.  This
will guarantee that no rescheduling will be done after it is cancelled.

Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>